Abstract
Interacting fermions on a lattice can develop strong quantum correlations, which are the cause of the classical intractability of many exotic phases of matter^{1,2,3}. Current efforts are directed towards the control of artificial quantum systems that can be made to emulate the underlying Fermi–Hubbard models^{4,5,6}. Electrostatically confined conductionband electrons define interacting quantum coherent spin and charge degrees of freedom that allow allelectrical initialization of lowentropy states and readily adhere to the Fermi–Hubbard Hamiltonian^{7,8,9,10,11,12,13,14,15,16,17}. Until now, however, the substantial electrostatic disorder of the solid state has meant that only a few attempts at emulating Fermi–Hubbard physics on solidstate platforms have been made^{18,19}. Here we show that for gatedefined quantum dots this disorder can be suppressed in a controlled manner. Using a semiautomated and scalable set of experimental tools, we homogeneously and independently set up the electron filling and nearestneighbour tunnel coupling in a semiconductor quantum dot array so as to simulate a Fermi–Hubbard system. With this setup, we realize a detailed characterization of the collective Coulomb blockade transition^{20}, which is the finitesize analogue of the interactiondriven Mott metaltoinsulator transition^{1}. As automation and device fabrication of semiconductor quantum dots continue to improve, the ideas presented here will enable the investigation of the physics of ever more complex manybody states using quantum dots.
This is a preview of subscription content, access via your institution
Relevant articles
Open Access articles citing this article.

Engineering topological states in atombased semiconductor quantum dots
Nature Open Access 22 June 2022

Signatures of discrete timecrystallinity in transport through an open Fermionic chain
Communications Physics Open Access 15 June 2022

Adiabatic quantum state transfer in a semiconductor quantumdot spin chain
Nature Communications Open Access 12 April 2021
Access options
Subscribe to Nature+
Get immediate online access to the entire Nature family of 50+ journals
$29.99
monthly
Subscribe to Journal
Get full journal access for 1 year
$199.00
only $3.90 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Buy article
Get time limited or full article access on ReadCube.
$32.00
All prices are NET prices.
References
Imada, M., Fujimori, A. & Tokura, Y. Metalinsulator transitions. Rev. Mod. Phys. 70, 1039–1263 (1998)
Balents, L. Spin liquids in frustrated magnets. Nature 464, 199–208 (2010)
Anderson, P. W. Twentyfive years of hightemperature superconductivity — a personal review. J. Phys. Conf. Ser. 449, 012001 (2013)
Jördens, R., Strohmaier, N., Günter, K., Moritz, H. & Esslinger, T. A Mott insulator of fermionic atoms in an optical lattice. Nature 455, 204–207 (2008)
Tanese, D. et al. Polariton condensation in solitonic gap states in a onedimensional periodic potential. Nat. Commun. 4, 1749 (2013)
Mazurenko, A. et al. A coldatom Fermi–Hubbard antiferromagnet. Nature 545, 462–466 (2017)
Manousakis, E. A quantumdot array as model for copperoxide superconductors: a dedicated quantum simulator for the manyfermion problem. J. Low Temp. Phys. 126, 1501–1513 (2002)
Byrnes, T., Kim, N. Y., Kusudo, K. & Yamamoto, Y. Quantum simulation of FermiHubbard models in semiconductor quantumdot arrays. Phys. Rev. B 78, 075320 (2008)
Yang, S., Wang, X. & Das Sarma, S. Generic Hubbard model description of semiconductor quantumdot spin qubits. Phys. Rev. B 83, 161301 (2011)
Barthelemy, P. & Vandersypen, L. M. K. Quantum dot systems: a versatile platform for quantum simulations. Ann. Phys. 525, 808–826 (2013)
Petta, J. R. et al. Coherent manipulation of coupled electron spins in semiconductor quantum dots. Science 309, 2180–2184 (2005)
Koppens, F. H. L. et al. Driven coherent oscillations of a single electron spin in a quantum dot. Nature 442, 766–771 (2006)
Petersson, K. D., Petta, J. R., Lu, H. & Gossard, A. C. Quantum coherence in a oneelectron semiconductor charge qubit. Phys. Rev. Lett. 105, 246804 (2010)
Martins, F. et al. Noise suppression using symmetric exchange gates in spin qubits. Phys. Rev. Lett. 116, 116801 (2016)
Reed, M. D. et al. Reduced sensitivity to charge noise in semiconductor spin qubits via symmetric operation. Phys. Rev. Lett. 116, 110402 (2016)
Baart, T. A. et al. Singlespin CCD. Nat. Nanotechnol. 11, 330–334 (2016)
Gray, J., Bayat, A., Puddy, R. K., Smith, C. G. & Bose, S. Unravelling quantum dot array simulators via singlettriplet measurements. Phys. Rev. B 94, 195136 (2016)
Singha, A. et al. Twodimensional MottHubbard electrons in an artificial honeycomb lattice. Science 332, 1176–1179 (2011)
Salfi, J. et al. Quantum simulation of the Hubbard model with dopant atoms in silicon. Nat. Commun. 7, 11342 (2016)
Stafford, C. A. & Das Sarma, S. Collective Coulomb blockade in an array of quantum dots: a MottHubbard approach. Phys. Rev. Lett. 72, 3590–3593 (1994)
Lanyon, B. P. et al. Universal digital quantum simulation with trapped ions. Science 334, 57–61 (2011)
Barends, R. et al. Digital quantum simulation of fermionic models with a superconducting circuit. Nat. Commun. 6, 7654 (2015)
Farooq, U., Bayat, A., Mancini, S. & Bose, S. Adiabatic manybody state preparation and information transfer in quantum dot arrays. Phys. Rev. B 91, 134303 (2015)
Oosterkamp, T. H. et al. Microwave spectroscopy of a quantumdot molecule. Nature 395, 873–876 (1998)
Livermore, C. et al. The Coulomb blockade in coupled quantum dots. Science 274, 1332–1335 (1996)
Lee, S. D. et al. Singleelectron spectroscopy in a tripledot system: role of interdot electronelectron interactions. Phys. Rev. B 62, R7735–R7738 (2000)
Wang, X., Yang, S. & Das Sarma, S. Quantum theory of the chargestability diagram of semiconductor doublequantumdot systems. Phys. Rev. B 84, 115301 (2011)
Baart, T. A., Eendebak, P. T., Reichl, C., Wegscheider, W. & Vandersypen, L. M. K. Computerautomated tuning of semiconductor double quantum dots into the singleelectron regime. Appl. Phys. Lett. 108, 213104 (2016)
Medford, J. et al. Selfconsistent measurement and state tomography of an exchangeonly spin qubit. Nat. Nanotechnol. 8, 654–659 (2013)
Basko, D. M., Aleiner, I. L. & Altshuler, B. L. Metalinsulator transition in a weakly interacting manyelectron system with localized singleparticle states. Ann. Phys. 321, 1126–1205 (2006)
Thalineau, R. et al. A fewelectron quadruple quantum dot in a closed loop. Appl. Phys. Lett. 101, 103102 (2012)
Seo, M. et al. Charge frustration in a triangular triple quantum dot. Phys. Rev. Lett. 110, 046803 (2013)
Veldhorst, M. et al. An addressable quantum dot qubit with faulttolerant controlfidelity. Nat. Nanotechnol. 9, 981–985 (2014)
Barthel, C. et al. Fast sensing of doubledot charge arrangement and spin state with a radiofrequency sensor quantum dot. Phys. Rev. B 81, 161308 (2010)
Colless, J. I. et al. Dispersive readout of a fewelectron double quantum dot with fast rf gate sensors. Phys. Rev. Lett. 110, 046805 (2013)
Van der Wiel, W. G. et al. Electron transport through double quantum dots. Rev. Mod. Phys. 75, 1–22 (2002)
DiCarlo, L. et al. Differential charge sensing and charge delocalization in a tunable double quantum dot. Phys. Rev. Lett. 92, 226801 (2004)
Acknowledgements
We acknowledge discussions with M. Veldhorst, A. F. Otte, R. Sensarma and the members of the Vandersypen group, sample fabrication by F. R. Braakman, setup preparation by T. A. Baart and experimental assistance from M. Ammerlaan, J. Haanstra, R. Roeleveld, R. Schouten and R. Vermeulen. This work was supported by the Netherlands Organization of Scientific Research (NWO) VICI programme, the European Commission via the integrated project SIQS, the Japan Society for the Promotion of Science (JSPS) Postdoctoral Fellowship for Research Abroad, LPSMPOCMTC and the Swiss National Science Foundation.
Author information
Authors and Affiliations
Contributions
T.H., T.F., C.J.v.D. and L.J. performed the experiments and analysed the data, C.R. and W.W. grew the heterostructure, X.L. and S.D.S. performed the theoretical analyses with X.L. carrying out the numerical simulations, T.H., T.F., X.L., L.J., S.D.S. and L.M.K.V. contributed to the interpretation of the data, and T.H. wrote the manuscript (X.L. wrote part of the Methods), with comments from T.F., X.L., S.D.S. and L.M.K.V.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Additional information
Reviewer Information thanks S. Bose, S. Rogge, J. Salfi and the other anonymous reviewer(s) for their contribution to the peer review of this work.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
Extended Data Figure 1 Gatetodot crosstalk.
a, Crosstalk measurement of gates P_{1} and B_{12} on the left dot detuning. (See Fig. 1 for details of the triplequantumdot array and associated gates.) The slope of the charge transition (fit in white) yields the relative effect (δB_{12}/δP_{1} = −α_{11}/α_{14}) of the two gates on the singleparticle energy offset ε_{1} of the leftmost dot. Note also the nonzero background in charge sensor response we find in experiments, which is due to a direct coupling between the swept gate voltages and the sensing dot conductivity. Text in brackets denotes electron filling. b, Charge stability diagram showing the anticrossing (white) and polarization line (red) between the left and middle dot, yielding the relative effect α_{11} = α_{21} + [(δP_{2}/δP_{1})(α_{22} − α_{12})] of the two plunger gates (P_{1} and P_{2}) on their respective dots. Automated edge finding and fitting procedures are outlined in Methods. c, Measured matrix elements α_{ij}/α_{22} (top left of each panel) as a function of tunnel coupling, t_{avg}. No visual distinction is made between the measured matrix elements at different electron filling. No error bars are shown, as the small uncertainty in the slope fits yields errors smaller than marker size. Note that α_{22}/α_{22} = 1 is shown as a line and α_{ii}/α_{22} values as redfilled circles, indicating that they derive from the slopes of polarization lines, such as the one shown in red in b.
Extended Data Figure 2 Simulated classical charge addition spectra.
a–c, Simulated charge addition spectra (see Methods for details and nomenclature) for a triple quantum dot at zero tunnel coupling, U_{2} = 1.05U_{1} = 0.95U_{3} and up to two particles per dot, connected to a reservoir at μ = 0 and k_{B}T = 0.02U (>10 times larger than for the experiments described in the main text), with V_{ij} = 0 and δ_{i} = 0 (a) or with V_{12} = V_{12} = 2V_{13} = 0.2U and δ_{i} = 0 (b) or δ_{1} = δ_{3} = 0 and δ_{2} = U/15 (c). denotes total electron filling, the sum of local interactions. States are denoted by charge occupation (n_{1} n_{2} n_{3}) and specific degeneracy points A–F are referred to in Methods. The relation between ε_{i} and μ′ specified in the boxes at lower left applies to the vertical line at zero (horizontal) detuning.
Extended Data Figure 3 Miniband width and electron temperature.
a, Measured charge stability diagrams of the (222)–(333) miniband as a function of homogeneous filling (only P_{1} values are shown) and offset in the outer two dot energies by changing P_{1} and P_{3} in opposite directions, akin to the simulations of Extended Data Fig. 2c. For crosses and dashed line, see b. b, Similar measurement as a function of the offset in the middle dot energy, controlled by P_{2}. The P_{1} values are somewhat different from those in a because these measurements were taken at slightly different tunnel coupling tunings. The white diamond and asterisk indicate (roughly) the position of the same degeneracy points as shown in Extended Data Fig. 2. c, Broadening of a charge addition line (blue) due to the finite temperature of the (rightmost) Fermi reservoir. A Fermi–Dirac fit of the transition is shown in red, which yields an effective reservoir temperature of 72(1) mK.
Extended Data Figure 4 Determining lever arm and tunnel coupling.
a, Example of a photon assisted tunnelling (PAT) measurement, which at low tunnel couplings is the measurement method of choice for both lever arm and tunnel coupling. Plotted is the difference in charge sensor response between applying a microwave excitation (y axis) or not as a function of detuning (x axis). Dashed red line is a fit to the hybridized charge state spectrum of the double dot^{24}. The energy difference between bonding and antibonding states yields the minimum in frequency (2t_{ij}, here for dots 1 and 2) and the slope away from the transition gives the lever arm between detuning voltages applied to the gates and singleparticle energy difference change between the two dots. The need to generate AC excitations and transmit them without severe losses through coaxial cables in the dilution refrigerator setup, however, limits the maximum tunnel frequency we can accurately determine with this method to roughly 20 GHz (83 μeV). b, Example of a polarization line width measurement (blue circles), with fit in red. As an alternative to PAT, one can determine the tunnel coupling by assessing the width of the polarization line^{37}. The excess charge (say on the left dot) transition is broadened both by an effective electron temperature and by the tunnel coupling. Charge sensor response is however not a direct measurement of excess charge. Not only does there exist a finite crosstalk between the gate voltages and the charge sensor response that leads to a finite slope away from the transition, we also typically find a backeffect of the excess charge on the sensing dot, leading to a different slope on either side of the transition. We fit the data with the following equation, taking this backeffect into account to first order in excess charge: , where V(ε) is the charge sensor response as a function of the detuning ε = δ(ε_{i} − ε_{j}) away from to the transition and V_{0}, δV and are the background signal, sensitivity and gate–sensor coupling, respectively. Note that ε is a linear combination of the swept gate voltages, taking the relevant crosscapacitances and the lever arm into account. Excess charge on the left dot is described by , with and effective temperature k_{B}T_{e} ≈ 6.5 μeV (1.6 GHz). c, Excess charge as function of detuning for three different tunnel couplings, showing that this characterization method works up to tunnel couplings that are several times higher than those measurable by PAT. d, Comparison of PAT and polarization line width measurements. The data are well explained by assuming a constant lever arm α_{22} = 83(1) μeV per mV between gate P_{2} and the middle dot. Text in brackets denote relevant charge states; error bars are 1σ fit uncertainties.
Extended Data Figure 5 Simulations of collective Coulomb blockade for the simplified Hubbard model.
a, Cartoon diagram of a tripledot system, which is a simplified version of the model used to describe the experiments in the main text. Specifically, we have set a uniform tunnel coupling t and Hubbard U (not shown), while ignoring the intersite Coulomb interaction term V_{ij}. We describe two levels per dot with a level splitting Δ that separates the singleparticle energies of the first and second orbital. Each energy level is doubly degenerate owing to the spin degrees of freedom. b, Peaks in the electron addition spectrum for the tripledot system in a. It is known that the classical Coulomb blockade effect arises purely from the charging effects of the quantum dots. When electron tunnelling between quantum dots is allowed, however, quantum fluctuations compete with the classical charging effects and give rise to a rich phase diagram, which is known as collective Coulomb blockade^{20}. The metal–insulator transition in such a system is best captured by the charge addition spectrum, which is precisely what we measure in the experiment (Fig. 3b). The numbers in b (at top and bottom of the panel) indicate the average electron numbers in the system when the chemical potential μ resides at the respective gap. Here we use Δ/U = 0.2, and k_{B}T/U = 0.04 (>20 times larger than for the experiments described in the main text). c–f, Line cuts for the addition spectrum in b at different values of t/U (shown at top left of each panel). As discussed in the main text, there will be three different regimes in this phase diagram: at weak tunnel couplings the quantum dot states split into minibands but the isolated Coulomb blockade of each individual dot is preserved; at intermediate tunnel couplings the Coulomb blockade of individual dots is lost, but the gap between minibands remains open; finally, in the large tunnel coupling limit the gap between minibands can become comparable to temperature, and the system will be in a metallic state. The same can be seen in these line cuts. At t = 0 we can see that there are four critical chemical potentials μ at which electrons can be added to the triple dot. For the present model, these four peaks occur at μ = 0, U, 2U + Δ, and 3U + Δ, respectively. Each peak is triply degenerate, as the energy cost of adding electrons to any of the three dots is identical. For nonzero but small tunnel couplings (d, e) each triply degenerate peak at t = 0 starts to split into a miniband, indicating the breakdown of Coulomb blockade in each dot. However, different minibands are still separated by gaps that arise from a collective origin, reminiscent of the energy gap in a Mott insulator. Finally, at sufficiently high tunnel couplings we find nonzero at the middle gap (f), indicating that Coulomb blockade is completely overwhelmed by temperature.
Extended Data Figure 6 Characterizing model parameters.
a, Simulated charge stability diagram for a tripledot system with parameters t = 0.006, U_{1} = 3.98, U_{2} = 3.48, U_{3} = 2.70, V_{12} = 0.41, V_{23} = 0.35, V_{13} = 0.11 (all energies in meV). As described in Methods, the eigenstates can be obtained exactly in the t = 0 limit, as the eigenstates of the tripledot system can be represented simply by the charge states (n_{1} n_{2} n_{3}). In this regime, one can show that on the ε_{2}–ε_{3} plane the border between the (111)/(112) region and the border between the (111)/(110) region are exactly separated by an energy of U_{3}. Similarly, the border between the (111)/(121) region and the border between the (111)/(101) region are separated by an energy of U_{2}. In the presence of a nonzero but small tunnel coupling as is the case here, we expect that such an estimate is still reasonable. Now that the tunnel coupling is nonzero, the ground state of the system is no longer an exact charge state (n_{1} n_{2} n_{3}), but generally a superposition of different charge states. To retain a connection to the t = 0 limit, we keep labelling sections of the charge stability as (n_{1} n_{2} n_{3}), but with the distinction in mind that (n_{1} n_{2} n_{3}) no longer denotes the exact ground state, but instead the charge state with the largest weight in the actual ground state. As a check, we can determine the values of U_{2} and U_{3} from the simulated charge stability diagram using the method described above and find that U_{2} = 3.44 meV and U_{3} = 2.71 meV, respectively, which is reasonably close to the corresponding model parameters. Because the data in Fig. 2c are taken at t/U = 0.002, we can thus trust the extracted U. b, Charge stability diagram for a tripledot system with parameters t = 0.17, U_{1} = 2.92, U_{2} = 2.39, U_{3} = 2.53, V_{12} = 0.55, V_{23} = 0.47, V_{13} = 0.27 (all energies in meV). We find that the structure of the charge stability diagram remains qualitatively the same as that in a, and if we again extract the values of U_{2} and U_{3} using the same method, we find that U_{2} = 2.48 meV and U_{3} = 2.56 meV, which still agrees reasonably well with the original model parameters. Granted, at sufficiently large t/U the structure of the charge stability diagram will change drastically, and the present method to extract model parameters is bound to fail. However, as we never enter those regimes, our fitting method serves the purpose of this experiment. c–e, Calibrated tunnel couplings (c) and measured intersite Coulomb (d) and onsite Coulomb (e) terms at calibrated values of the average tunnel coupling, corresponding to the experimental parameter space plot shown in Fig. 3b. Plotting symbols are defined in each key; blue shows data from the first subband from 0 to 6 electrons, red shows data from the second subband from 6 to 12 electrons. Error bars are 1σ fit uncertainties.
Extended Data Figure 7 Isolated versus collective Coulomb blockade in charge and transport.
a–d, Charge stability diagrams (a and c) and transport through the array (b and d), at low (a and b) and high (c and d) tunnel coupling. Panels a and c show charge stability diagram around the (333) regime in the low (a) and high (c) tunnel coupling regimes, using a combination of all seven gates (only P_{1} values are shown) that change the local fillings equally. To further investigate the distinct phases, we focus on the regime with around nine electrons in total, corresponding to halffilling of the second band, and look at both charge sensing and transport. In the localized phase (t/U < 0.02 in a), the charge stability diagram shows transition lines following three distinct, welldefined directions, corresponding to the filling of the separate lithographically defined dots. In the delocalized phase (t/U > 0.15 in c), this distinct nature is all but lost, highlighting the incipient formation of a large single dot. The same effect can also be seen in transport measurements, as we observe Coulomb diamond sizes as a function of filling. b, Transport through the array following the zerodetuning line of Fig. 2b as a function of applied bias (60% on leftmost and 40% on bottom right reservoir). In the (333) state, this applied bias has to overcome the local (strong) Coulomb repulsion in order for current to flow, similar to a Mott insulator whose Fermi energy resides inside the gap. Adjacent Coulomb diamonds correspond to a Fermilevel inside the miniband and are significantly smaller, allowing current to flow at much smaller bias voltages. d, Similar data in the high tunnel coupling regime. Whereas the individual nature of the dots is all but gone, global (weaker) Coulomb repulsion still prohibits transport at small bias, as expected for the collective Coulomb blockade phase. The notion of a large gap at halffilling is gone, and it is only the charging energy of the entire system that prohibits transport occurring, regardless of filling. The dots are in collective Coulomb blockade, and its transport characteristics are similar to that of a small, metallic island.
Rights and permissions
About this article
Cite this article
Hensgens, T., Fujita, T., Janssen, L. et al. Quantum simulation of a Fermi–Hubbard model using a semiconductor quantum dot array. Nature 548, 70–73 (2017). https://doi.org/10.1038/nature23022
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nature23022
This article is cited by

Signatures of discrete timecrystallinity in transport through an open Fermionic chain
Communications Physics (2022)

Engineering topological states in atombased semiconductor quantum dots
Nature (2022)

Quantum tomography of an entangled threequbit state in silicon
Nature Nanotechnology (2021)

Adiabatic quantum state transfer in a semiconductor quantumdot spin chain
Nature Communications (2021)

Electron cascade for distant spin readout
Nature Communications (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.