Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Basis of catalytic assembly of the mitotic checkpoint complex


In mitosis, for each daughter cell to inherit an accurate copy of the genome from the mother cell, sister chromatids in the mother cell must attach to microtubules emanating from opposite poles of the mitotic spindle, a process known as bi-orientation. A surveillance mechanism, termed the spindle assembly checkpoint (SAC), monitors the microtubule attachment process and can temporarily halt the separation of sister chromatids and the completion of mitosis until bi-orientation is complete1. SAC failure results in abnormal chromosome numbers, termed aneuploidy, in the daughter cells, a hallmark of many tumours. The HORMA-domain-containing protein mitotic arrest deficient 2 (MAD2) is a subunit of the SAC effector mitotic checkpoint complex (MCC). Structural conversion from the open to the closed conformation of MAD2 is required for MAD2 to be incorporated into the MCC1. In vitro, MAD2 conversion and MCC assembly take several hours2,3,4, but in cells the SAC response is established in a few minutes5,6,7. Here, to address this discrepancy, we reconstituted a near-complete SAC signalling system with purified components and monitored assembly of the MCC in real time. A marked acceleration in MAD2 conversion and MCC assembly was observed when monopolar spindle 1 (MPS1) kinase phosphorylated the MAD1–MAD2 complex, triggering it to act as the template for MAD2 conversion and therefore contributing to the establishment of a physical platform for MCC assembly. Thus, catalytic activation of the SAC depends on regulated protein–protein interactions that accelerate the spontaneous but rate-limiting conversion of MAD2 required for MCC assembly.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Stability of MCC.
Figure 2: Catalytic assembly of MCC.
Figure 3: Molecular requirements of catalytic MCC assembly.
Figure 4: MPS1 activates MAD1.
Figure 5: Role of catalysis in MAD2 activation dynamics.

Similar content being viewed by others


  1. Musacchio, A. The molecular biology of spindle assembly checkpoint signaling dynamics. Curr. Biol. 25, R1002–R1018 (2015)

    Article  CAS  Google Scholar 

  2. Luo, X. et al. The Mad2 spindle checkpoint protein has two distinct natively folded states. Nat. Struct. Mol. Biol. 11, 338–345 (2004)

    Article  CAS  Google Scholar 

  3. Simonetta, M. et al. The influence of catalysis on Mad2 activation dynamics. PLoS Biol. 7, e10 (2009)

    Article  Google Scholar 

  4. Kulukian, A., Han, J. S. & Cleveland, D. W. Unattached kinetochores catalyze production of an anaphase inhibitor that requires a Mad2 template to prime Cdc20 for BubR1 binding. Dev. Cell 16, 105–117 (2009)

    Article  CAS  Google Scholar 

  5. Dick, A. E. & Gerlich, D. W. Kinetic framework of spindle assembly checkpoint signalling. Nat. Cell Biol. 15, 1370–1377 (2013)

    Article  CAS  Google Scholar 

  6. Hagting, A. et al. Human securin proteolysis is controlled by the spindle checkpoint and reveals when the APC/C switches from activation by Cdc20 to Cdh1. J. Cell Biol. 157, 1125–1137 (2002)

    Article  CAS  Google Scholar 

  7. Clute, P. & Pines, J. Temporal and spatial control of cyclin B1 destruction in metaphase. Nat. Cell Biol. 1, 82–87 (1999)

    Article  CAS  Google Scholar 

  8. Fraschini, R. et al. Bub3 interaction with Mad2, Mad3 and Cdc20 is mediated by WD40 repeats and does not require intact kinetochores. EMBO J. 20, 6648–6659 (2001)

    Article  CAS  Google Scholar 

  9. Sudakin, V., Chan, G. K. & Yen, T. J. Checkpoint inhibition of the APC/C in HeLa cells is mediated by a complex of BUBR1, BUB3, CDC20, and MAD2. J. Cell Biol. 154, 925–936 (2001)

    Article  CAS  Google Scholar 

  10. Hardwick, K. G., Johnston, R. C., Smith, D. L. & Murray, A. W. MAD3 encodes a novel component of the spindle checkpoint which interacts with Bub3p, Cdc20p, and Mad2p. J. Cell Biol. 148, 871–882 (2000)

    Article  CAS  Google Scholar 

  11. Chao, W. C., Kulkarni, K., Zhang, Z., Kong, E. H. & Barford, D. Structure of the mitotic checkpoint complex. Nature 484, 208–213 (2012)

    Article  ADS  CAS  Google Scholar 

  12. Izawa, D. & Pines, J. The mitotic checkpoint complex binds a second CDC20 to inhibit active APC/C. Nature 517, 631–634 (2015)

    Article  ADS  CAS  Google Scholar 

  13. Alfieri, C. et al. Molecular basis of APC/C regulation by the spindle assembly checkpoint. Nature 536, 431–436 (2016)

    Article  ADS  CAS  Google Scholar 

  14. Yamaguchi, M. et al. Cryo-EM of mitotic checkpoint complex-bound APC/C reveals reciprocal and conformational regulation of ubiquitin ligation. Mol. Cell 63, 593–607 (2016)

    Article  CAS  Google Scholar 

  15. Luo, X., Tang, Z., Rizo, J. & Yu, H. The Mad2 spindle checkpoint protein undergoes similar major conformational changes upon binding to either Mad1 or Cdc20. Mol. Cell 9, 59–71 (2002)

    Article  Google Scholar 

  16. Sironi, L. et al. Crystal structure of the tetrameric Mad1–Mad2 core complex: implications of a ‘safety belt’ binding mechanism for the spindle checkpoint. EMBO J. 21, 2496–2506 (2002)

    Article  CAS  Google Scholar 

  17. De Antoni, A. et al. The Mad1/Mad2 complex as a template for Mad2 activation in the spindle assembly checkpoint. Curr. Biol. 15, 214–225 (2005)

    Article  CAS  Google Scholar 

  18. Mapelli, M., Massimiliano, L., Santaguida, S. & Musacchio, A. The Mad2 conformational dimer: structure and implications for the spindle assembly checkpoint. Cell 131, 730–743 (2007)

    Article  CAS  Google Scholar 

  19. Sironi, L. et al. Mad2 binding to Mad1 and Cdc20, rather than oligomerization, is required for the spindle checkpoint. EMBO J. 20, 6371–6382 (2001)

    Article  CAS  Google Scholar 

  20. Santaguida, S., Tighe, A., D’Alise, A. M., Taylor, S. S. & Musacchio, A. Dissecting the role of MPS1 in chromosome biorientation and the spindle checkpoint through the small molecule inhibitor reversine. J. Cell Biol. 190, 73–87 (2010)

    Article  CAS  Google Scholar 

  21. Baron, A. P. et al. Probing the catalytic functions of Bub1 kinase using the small molecule inhibitors BAY-320 and BAY-524. eLife 5, e12187 (2016)

    Article  Google Scholar 

  22. Kim, S., Sun, H., Tomchick, D. R., Yu, H. & Luo, X. Structure of human Mad1 C-terminal domain reveals its involvement in kinetochore targeting. Proc. Natl Acad. Sci. USA 109, 6549–6554 (2012)

    Article  ADS  CAS  Google Scholar 

  23. Maldonado, M. & Kapoor, T. M. Constitutive Mad1 targeting to kinetochores uncouples checkpoint signalling from chromosome biorientation. Nat. Cell Biol. 13, 475–482 (2011)

    Article  CAS  Google Scholar 

  24. Overlack, K. et al. A molecular basis for the differential roles of Bub1 and BubR1 in the spindle assembly checkpoint. eLife 4, e05269 (2015)

    Article  Google Scholar 

  25. Di Fiore, B. et al. The ABBA motif binds APC/C activators and is shared by APC/C substrates and regulators. Dev. Cell 32, 358–372 (2015)

    Article  CAS  Google Scholar 

  26. Diaz-Martinez, L. A. et al. The Cdc20-binding Phe box of the spindle checkpoint protein BubR1 maintains the mitotic checkpoint complex during mitosis. J. Biol. Chem. 290, 2431–2443 (2015)

    Article  CAS  Google Scholar 

  27. Vleugel, M. et al. Dissecting the roles of human BUB1 in the spindle assembly checkpoint. J. Cell Sci. 128, 2975–2982 (2015)

    Article  CAS  Google Scholar 

  28. London, N. & Biggins, S. Mad1 kinetochore recruitment by Mps1-mediated phosphorylation of Bub1 signals the spindle checkpoint. Genes Dev. 28, 140–152 (2014)

    Article  CAS  Google Scholar 

  29. Brady, D. M. & Hardwick, K. G. Complex formation between Mad1p, Bub1p and Bub3p is crucial for spindle checkpoint function. Curr. Biol. 10, 675–678 (2000)

    Article  CAS  Google Scholar 

  30. Moyle, M. W. et al. A Bub1–Mad1 interaction targets the Mad1–Mad2 complex to unattached kinetochores to initiate the spindle checkpoint. J. Cell Biol. 204, 647–657 (2014)

    Article  CAS  Google Scholar 

  31. Han, J. S. et al. Catalytic assembly of the mitotic checkpoint inhibitor BubR1–Cdc20 by a Mad2-induced functional switch in Cdc20. Mol. Cell 51, 92–104 (2013)

    Article  CAS  Google Scholar 

  32. Musacchio, A. & Ciliberto, A. The spindle-assembly checkpoint and the beauty of self-destruction. Nat. Struct. Mol. Biol. 19, 1059–1061 (2012)

    Article  CAS  Google Scholar 

  33. Mapelli, M. et al. Determinants of conformational dimerization of Mad2 and its inhibition by p31comet. EMBO J. 25, 1273–1284 (2006)

    Article  CAS  Google Scholar 

  34. Rieder, C. L., Cole, R. W., Khodjakov, A. & Sluder, G. The checkpoint delaying anaphase in response to chromosome monoorientation is mediated by an inhibitory signal produced by unattached kinetochores. J. Cell Biol. 130, 941–948 (1995)

    Article  CAS  Google Scholar 

  35. Collin, P., Nashchekina, O., Walker, R. & Pines, J. The spindle assembly checkpoint works like a rheostat rather than a toggle switch. Nat. Cell Biol. 15, 1378–1385 (2013)

    Article  CAS  Google Scholar 

  36. Goedhart, J. et al. Structure-guided evolution of cyan fluorescent proteins towards a quantum yield of 93%. Nat. Commun. 3, 751 (2012)

    Article  ADS  Google Scholar 

  37. Popp, M. W. & Ploegh, H. L. Making and breaking peptide bonds: protein engineering using sortase. Angew. Chem. Int. Edn Engl. 50, 5024–5032 (2011)

    Article  CAS  Google Scholar 

  38. Rappsilber, J., Mann, M. & Ishihama, Y. Protocol for micro-purification, enrichment, pre-fractionation and storage of peptides for proteomics using StageTips. Nat. Protocols 2, 1896–1906 (2007)

    Article  CAS  Google Scholar 

  39. Michalski, A. et al. Mass spectrometry-based proteomics using Q Exactive, a high-performance benchtop quadrupole Orbitrap mass spectrometer. Mol. Cell. Proteomics 10, M111.011015 (2011)

    Article  Google Scholar 

  40. Olsen, J. V. et al. Higher-energy C-trap dissociation for peptide modification analysis. Nat. Methods 4, 709–712 (2007)

    Article  ADS  CAS  Google Scholar 

  41. Cox, J. & Mann, M. MaxQuant enables high peptide identification rates, individualized p.p.b.-range mass accuracies and proteome-wide protein quantification. Nat. Biotechnol. 26, 1367–1372 (2008)

    Article  CAS  Google Scholar 

  42. Vassilev, L. T. et al. Selective small-molecule inhibitor reveals critical mitotic functions of human CDK1. Proc. Natl Acad. Sci. USA 103, 10660–10665 (2006)

    Article  ADS  CAS  Google Scholar 

Download references


We thank T. Kapoor and G. Siemeister for sharing reagents; the J.-M. Peters laboratory for the CDC20 expression vector; H. Ploegh for the Sortase expression vector; Y. Wu for help with construction of FRET probes; O. Durczak for technical assistance; A. Ciliberto for suggestions and comments; and G. Vader and the A.M. laboratory for discussions and reading of the manuscript. A.C.F. acknowledges support by an EMBO long-term fellowship (ALTF 1096-2012) and a Marie Curie Intra-European Fellowship (IEF). A.M. acknowledges funding by the Framework Program 7 Integrated Project MitoSys, the Horizon 2020 ERC agreement RECEPIANCE, and the DFG’s Collaborative Research Centre (CRC) 1093.

Author information

Authors and Affiliations



A.C.F. and A.M. designed experiments and analysed results. A.C.F., M.T., C.B. and S.v.G. set up recombinant expression systems and purified proteins. A.C.F. performed in vitro experiments. M.T. performed solid-phase binding assays. S.M. and S.v.G. performed cellular SAC assays. F.M. and T.B. performed mass-spectrometry measurements. A.M. supervised the project. A.C.F. and A.M. wrote the manuscript.

Corresponding authors

Correspondence to Alex C. Faesen or Andrea Musacchio.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Additional information

Reviewer Information

Nature thanks T. Kapoor, J. Pines and the other anonymous reviewer(s) for their contribution to the peer review of this work.

Extended data figures and tables

Extended Data Figure 1 MCC constituents and MAD2-template model.

a, Schematic of MCC constituents and their domain structure. b, Cartoon model of the crystal structure of the Schizosaccharomyces pombe MCC complex11 (Protein Data Bank accession number: 4AEZ). CDC20 consists mainly of WD40 β-propeller domains, where the N-terminal extension interacts with MAD2 (at the MIM). Mad3 is the yeast orthologue of BUBR1. BUBR1, which is constitutively bound to BUB3, contains many functional motifs and structural domains, a few of which are highlighted in a. c, Cartoon models of the crystal structures of O-MAD2 and C-MAD2. The HORMA domain of MAD2 exists in two distinct topologies: O-MAD2, when unbound by ligand; and C-MAD2, when bound to the MIMs of MAD1 or CDC20 (refs 15,16). The change in topology is due to relocation of mobile elements of the structure, indicated in grey. d, Schematic representation of MAD1 and MAD1-deletion mutants used in this study. e, Schematic representation of the MAD2 template model.

Extended Data Figure 2 Characterizing the MCC using FRET sensors.

a, Coomassie-stained SDS–PAGE gel of recombinant proteins used in this study. b, Fluorescence emission spectrum of MCCS1 excited at 430 nm. The concentration of all proteins is 100 nM, expect for the CDC20 peptide, which was used in large excess (5 μM) in competition reactions. Signals were normalized to peak donor emission at 470 nm. No change in emission was observed in presence of only O-MAD2–TAMRA, or when CFP–CDC20 was measured in isolation (black) or with a TAMRA-labelled peptide (green). The excess of CDC20 peptide competed for MAD2 binding and no FRET was observed (brown). c, In an additional control for MCCS1, CFP–CDC20 was tested against TAMRA-labelled ‘loopless’ (O-MAD2-LL–TAMRA), a MAD2 mutant that is locked in the O-MAD2 conformation and cannot bind CDC20 (ref. 18). Assay conditions were as described in b. d, MCC formation relies on the presence of CDC20. Fluorescence emission spectra of MCCS2 (or parts thereof) excited at 430 nm. No change in emission was observed in the presence of only O-MAD2–TAMRA (no CFP–BUBR1–BUB3, blue) or when CFP–BUBR1–BUB3 was measured in isolation (black), in the presence of O-MAD2–TAMRA (without CDC20, purple), or in the presence of CDC20 and a TAMRA-labelled peptide not conjugated to MAD2 (green). The only condition that led to changes in donor and acceptor emission spectra was when CFP–BUBR1–BUB3, TAMRA–MAD2 and CDC20 were present at the same time (red). FRET efficiency upon complex formation at equilibrium was 35%. The concentration of all proteins was 100 nM. Signals were normalized to peak donor emission at 470 nm. e, In an additional control for MCCS2, CFP–BUBR1 was tested in the presence of CDC20 against O-MAD2-LL–TAMRA. Assay conditions were as described in d. f, Recombinant O-MAD2–TAMRA, CDC20 and CFP–BUBR1–BUB3 form the MCC complex. Size-exclusion chromatography elution profiles of O-MAD2–TAMRA (dark blue trace), CDC20 (green trace), CFP–BUBR1–BUB3 (light blue trace) or all mixed to form the MCC complex (orange trace). The shift in the elution profile indicates complex formation. g, BUB3 does not affect MCCcore stability. A titration experiment determining the binding isotherms of the MCC complex, using MCCS2 in the presence (red) or absence (blue) of BUB3, showed indistinguishable apparent Kd values. Data are mean ± s.e.m. of three independent technical replicates of the experiments.

Extended Data Figure 3 Microinjection of recombinant fluorescent MCC proteins.

a, b, Recombinant fluorescent MCC proteins injected into mitotic cells localize to kinetochores. HeLa cells constitutively expressing LAP–BUB1 (a) or transiently expressing mCherry–CENP-A (b) were synchronized in the G2 phase of the cell cycle by treatment with the CDK1 inhibitor RO3306 (ref. 42) and released into mitosis in the presence of nocodazole. Shortly after release, cells were injected with either TAMRA–MAD2 or TAMRA (a), or with CFP–BUBR1–BUB3 (b). Cells were live-imaged both before (Pre) and after (Post) microinjection. Scale bars, 2 μm. Number of injected cells, n, for TAMRA, n = 2; for TAMRA–MAD2, n = 9; for mTurquoise–BUBR1–BUB3, n = 8.

Extended Data Figure 4 MCC assembly kinetics.

a, The CDC20–MAD2 complex forms slowly. The time-dependent change of acceptor (left) and donor (right) fluorescence (normalized to values at equilibrium) with 10 nM CFP–BUBR1–BUB3 (see Supplementary Information Section G for details of the effects of BUBR1 concentration on reaction rate of MCCS2) and 500 nM CDC20 with varying concentrations of O-MAD2–TAMRA. Signal changes were fitted to single exponential curves. b, After the single-exponential fitting of the curves in a, the apparent first order rate constants (kobs) were plotted as a function of MAD2 concentration, with kon being the slope of the resulting curve. These kon values depend on the concentration of BUBR1 (see c and Supplementary Information Section G). c, MCC assembly assay performed with MCCS2 with 100 nM O-MAD2–TAMRA, 500 nM CDC20 and the indicated concentrations of CFP–BUBR1–BUB3. d, BUBR1 does not influence the assembly kinetics of the MCC. Monitoring the assembly of CDC20–MAD2 (MCCS1; blue), CDC20–MAD2 with dark BUBR1–BUB3 (MCCS1; red) and BUBR1–MAD2 with dark CDC20 (green) shows indistinguishable rates. e, Catalysis rates scale linearly with catalyst concentration. After pre-incubation of the catalyst proteins, MCC assembly was monitored with MCCS2 (sensor concentrations were 100 nM, except for CDC20, which was 500 nM) at varying catalyst concentrations. Initial velocity (Vi) signal changes were plotted against catalyst concentration, revealing a linear dependency. f, Catalysis of MCC formation could be observed with both FRET sensors. After pre-incubation of MAD1–C-MAD2, BUB1–BUB3 and MPS1 at 1 μM for 30 min, similar catalysis rates were observed with either MCCS1 (blue) or MCCS2 (red). The assay was performed as described in Fig. 2b, with all proteins at 100 nM. Data are mean ± s.e.m. of three independent technical replicates of the experiments (b, e).

Extended Data Figure 5 Molecular requirements of catalytic MCC assembly.

a, Catalytic MCC assembly requires MAD1–C-MAD2, MPS1, ATP and BUB1–BUB3. MCC assembly was monitored with MCCS2, as described in Fig. 2b, using 100 nM catalysts. Individual components were omitted as indicated. The same control profiles (black and red curves) are shown here and in Fig. 2. b, MAD1 with the N-terminal 419 residues deleted (MAD1420-C; red) is a minimal construct capable of full catalysis. A reduction in the catalytic rate was observed with MAD1 with the N-terminal 484 residues deleted (MAD1485-C; purple) compared to full-length MAD1 (MAD1FL; yellow) or MAD1420-C. The assay was performed with MCCS2 as described in Fig. 2b, using 100 nM catalysts. Catalytic activation is salt-sensitive, probably because high salt inhibits phosphorylation-mediated polar interactions (see c, d). c, d, Catalysis is sensitive to salt concentration. MCC assembly was monitored with MCCS2, using 75 mM (red), 150 mM (blue), 300 mM (green) or 500 mM NaCl (brown), in the absence (c) or presence (d) of catalysts. The assay was performed with MCCS2, as described in Fig. 2b.

Extended Data Figure 6 Inhibiting catalysis.

a, Inhibiting MPS1 and BUB1 during pre-incubation strongly reduces catalysis. Adding both Reversine and BAY-320 to the pre-incubation solution of catalysts strongly reduced the catalysis of MCC formation. Adding the inhibitors after pre-incubation but before addition to the MCCS2 components did not affect catalysis. Final concentrations of inhibitors were 50 μM during pre-incubation and 5 μM in the assay. b, As in Fig. 4a, but with the BUB1 inhibitor BAY-320 rather than Reversine. BUB1 without functional kinase activity (BUB1KD) was used as a control. c, Catalysis rates remained unchanged when the pre-incubation of catalyst proteins was ‘split’ into two reactions (MAD1–C-MAD2 together with MPS1 or BUB1 alone; compare green to red). Assay performed with MCCS2, as described in Fig. 2b, using 100 nM catalysts. d, MAD1–C-MAD2 is phosphorylated by MPS1. Catalysis rates remained unchanged when the pre-incubation of catalyst proteins was split into two reactions (MAD1–C-MAD2 together with MPS1 or BUB1 alone; compare green to red). Adding the kinase inhibitors Reversine (targeting MPS1) and BAY-320 (BUB1) to the pre-incubation reaction strongly reduced the rates of catalysis (orange). However, inverting the inhibitors had no effect on the catalysis rates (blue). Assay performed with MCCS2, as described in Fig. 2b, using 100 nM catalysts. Final concentrations of inhibitors are 5 μM in assay (50 μM during pre-incubation).

Extended Data Figure 7 MPS1 phosphorylation of MAD1.

a, Phosphorylation sites of MAD1 by MPS1. The peptide sequence with the phosphorylated residue in bold, the amino acid position within the protein, the P value of the posterior error probability for the identified peptide (PEP) and the Andromeda search engine score (score) are shown. Residue numbers in bold indicate phosphorylation sites found in at least two experiments. bd, In b, HeLa cells were transfected with mCherry (Control), mCherry–MIS12–MAD1WT (WT), mCherry–MIS12–MAD1S428A (S428A), mCherry–MIS12–MAD1RWD-A (RWD-A) or mCherry–MIS12–MAD1S428A/RWD-A (S428A, RWD-A) as described and quantified in the legend of Fig. 4c. Shown are mitotic cells, representative of the mitotic population in each cohort (mCherry control, 59 cells; mCherry–MIS12–MAD1WT, 247 cells; mCherry–MIS12–MAD1S428A, 203 cells; mCherry–MIS12–MAD1RWD-A, 83 cells; mCherry–MIS12–MAD1S428A/RWD-A, 91 cells). Following a 30-h transfection with the indicated constructs, cells were fixed and processed for western blotting (c) or immunofluorescence (d and Fig. 4c). Western blot analysis showed that expression levels of mCherry–MIS12–MAD1 fusions were lower than endogenous MAD1 levels (c). Scale bars, 5 μm. Quantification of the kinetochore signal was performed on unmodified Z series images. Following background subtraction, a ratio for mCherry–MIS12–MAD1/CREST intensity signals was calculated. All ratios were normalized to the mean of mCherry–MIS12–MAD1WT ratio. Quantifications are based on two independent biological replicates of the experiment, for a total of five cells for each condition, where 254 (mCherry–MIS12–MAD1WT), 143 (mCherry–MIS12–MAD1S428A), 207 (mCherry–MIS12–MAD1RWD-A) or 188 (mCherry–MIS12–MAD1S428A/RWD-A) kinetochores were analysed. Shown is a box-and-whiskers graph, indicating the median, a box with the 25–75th percentile and hinges indicating the upper and lower limits of the data points.

Extended Data Figure 8 MAD1 and BUB1 interact to combine O-MAD2 and CDC20.

a, MAD1–C-MAD2 and BUB1–BUB3 together form the MCC enzyme, while MPS1 suffices in sub-stoichiometric amounts. Lowering the concentration of all catalysts increased the half-life (halftime) tenfold (compare conditions 1 and 8). Lowering individual components reduces rates to intermediate levels for MAD1–C-MAD2 (condition 2) and BUB1–BUB3 (condition 3), but not MPS1 (condition 4). Lowering both MAD1–C-MAD2 and BUB1–BUB3 (condition 5) mimics the reduction of all components (condition 8), whereas reducing MAD1–C-MAD2 or BUB1–BUB3 in combination with MPS1 (conditions 6 and 7, respectively) only resulted in intermediate rates. Assays were performed with MCCS2 as described in Fig. 2b, using either 100 nM (1×) or 10 nM (0.1×) catalysts. b, Excluding BUBR1 does not affect catalytic rates (green and blue). Assays were performed using MCCS1, all proteins were present at 100 nM. c, The interaction between BUB1 and CDC20 enhances binding with MAD2. A BUB1 construct that does not bind CDC20 (the KEN1-ABBA mutant (BUB1KEN1-ABBAmut); purple) yields similar rates as in the absence of BUB1 (grey). Assay performed with MCCS2 and as described in Fig. 2b, using 100 nM catalysts. d, MAD1–C-MAD2 and BUB1–BUB3 show an ATP-dependent interaction in the presence of MPS1. Pull-down experiment using MBP–MAD1–C-MAD2 as bait. Assay was performed with 1 μM MAD1–C-MAD2, 2 μM BUB1–BUB3 and 400 nM MPS1. e, Values of FRET from MCCS2 (1 nM CFP–BUBR1 and 500 nM CDC20) after equilibration with or without catalysts (25 nM catalyst concentration). Data are mean ± s.e.m. of three independent technical replicates of the experiment (b, e).

Supplementary information

Supplementary Information

This file contains a Supplementary Discussion, Supplementary References and the uncropped gels for Extended Data Figures 2, 7 and 8. (PDF 2357 kb)

PowerPoint slides

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Faesen, A., Thanasoula, M., Maffini, S. et al. Basis of catalytic assembly of the mitotic checkpoint complex. Nature 542, 498–502 (2017).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing