Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Surface patterning of nanoparticles with polymer patches

This article has been updated


Patterning of colloidal particles with chemically or topographically distinct surface domains (patches) has attracted intense research interest1,2,3. Surface-patterned particles act as colloidal analogues of atoms and molecules4,5, serve as model systems in studies of phase transitions in liquid systems6, behave as ‘colloidal surfactants’7 and function as templates for the synthesis of hybrid particles8. The generation of micrometre- and submicrometre-sized patchy colloids is now efficient9,10,11, but surface patterning of inorganic colloidal nanoparticles with dimensions of the order of tens of nanometres is uncommon. Such nanoparticles exhibit size- and shape-dependent optical, electronic and magnetic properties, and their assemblies show new collective properties12. At present, nanoparticle patterning is limited to the generation of two-patch nanoparticles13,14,15, and nanoparticles with surface ripples16 or a ‘raspberry’ surface morphology17. Here we demonstrate nanoparticle surface patterning, which utilizes thermodynamically driven segregation of polymer ligands from a uniform polymer brush into surface-pinned micelles following a change in solvent quality. Patch formation is reversible but can be permanently preserved using a photocrosslinking step. The methodology offers the ability to control the dimensions of patches, their spatial distribution and the number of patches per nanoparticle, in agreement with a theoretical model. The versatility of the strategy is demonstrated by patterning nanoparticles with different dimensions, shapes and compositions, tethered with various types of polymers and subjected to different external stimuli. These patchy nanocolloids have potential applications in fundamental research, the self-assembly of nanomaterials, diagnostics, sensing and colloidal stabilization.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Polymer segregation on the nanoparticle surface.
Figure 2: Structural transitions in the polymer layer on the surface of gold nanospheres.
Figure 3: Generality of polymer patterning of nanoparticle surface.
Figure 4: Self-assembly of patterned nanoparticles.

Similar content being viewed by others

Change history

  • 05 October 2016

    Present addresses were added for author O.G., who is currently associated with the Center for Functional Nanomaterials, Brookhaven National Laboratory, and with the Departments of Chemical Engineering and of Applied Physics and Applied Mathematics at Columbia University.


  1. Bianchi, E., Blaak, R. & Likos, C. N. Patchy colloids: state of the art and perspectives. Phys. Chem. Chem. Phys. 13, 6397–6410 (2011)

    Article  CAS  Google Scholar 

  2. Preisler, Z., Vissers, T., Munaŏ, G., Smallenburg, F. & Sciortino, F. Equilibrium phases of one-patch colloids with short-range attractions. Soft Matter 10, 5121–5128 (2014)

    Article  CAS  ADS  Google Scholar 

  3. Chen, Q., Bae, S. C. & Granick, S. Directed self-assembly of a colloidal kagome lattice. Nature 469, 381–384 (2011)

    Article  CAS  ADS  Google Scholar 

  4. Glotzer, S. C. & Solomon, M. J. Anisotropy of building blocks and their assembly into complex structures. Nat. Mater. 6, 557–562 (2007)

    Article  Google Scholar 

  5. Gröschel, A. H. et al. Guided hierarchical co-assembly of soft patchy nanoparticles. Nature 503, 247–251 (2013)

    Article  ADS  Google Scholar 

  6. Kern, N. & Frenkel, D. Fluid–fluid coexistence in colloidal systems with short-ranged strongly directional attraction. J. Chem. Phys. 118, 9882–9889 (2003)

    Article  CAS  ADS  Google Scholar 

  7. Binks, B. P. Particles as surfactants: similarities and differences. Curr. Opin. Colloid Interface Sci. 7, 21–41 (2002)

    Article  CAS  Google Scholar 

  8. Chen, T., Chen, G., Xing, S., Wu, T. & Chen, H. Scalable routes to Janus Au-SiO2 and ternary Ag-Au-SiO2 nanoparticles. Chem. Mater. 22, 3826–3828 (2010)

    Article  CAS  Google Scholar 

  9. Wang, Y. et al. Colloids with valence and specific directional bonding. Nature 491, 51–55 (2012)

    Article  CAS  ADS  Google Scholar 

  10. Pawar, A. B. & Kretzschmar, I. Fabrication, assembly, and application of patchy particles. Macromol. Rapid Commun. 31, 150–168 (2010)

    Article  CAS  Google Scholar 

  11. Sacanna, S. & Pine, D. J. Shape-anisotropic colloids: building blocks for complex assemblies. Curr. Opin. Colloid Interf. Sci. 16, 96–105 (2011)

    Article  CAS  Google Scholar 

  12. Nie, Z. H., Petukhova, A. & Kumacheva, E. Properties and emerging applications of self-assembled structures of inorganic nanoparticles. Nat. Nanotechnol. 5, 15–25 (2010)

    Article  CAS  ADS  Google Scholar 

  13. Lattuada, M. & Hatton, T. A. Synthesis, properties and applications of Janus nanoparticles. Nano Today 6, 286–308 (2011)

    Article  CAS  Google Scholar 

  14. Andala, D. M., Shin, S. H. R., Lee, H. Y. & Bishop, K. J. M. Templated synthesis of amphiphilic nanoparticles at the liquid-liquid interface. ACS Nano 6, 1044–1050 (2012)

    Article  CAS  Google Scholar 

  15. Vilain, C., Goettmann, F., Moores, A., Le Floch, P. & Sanchez, C. Study of metal nanoparticles stabilised by mixed ligand shell: a striking blue shift of the surface-plasmon band evidencing the formation of Janus nanoparticles. J. Mater. Chem. 17, 3509–3514 (2007)

    Article  CAS  Google Scholar 

  16. Jackson, A. M., Myerson, J. W. & Stellacci, F. Spontaneous assembly of subnanometre ordered domains in the ligand shell of monolayer-protected nanoparticles. Nat. Mater. 3, 330–336 (2004)

    Article  CAS  ADS  Google Scholar 

  17. Bao, C. et al. Effect of molecular weight on lateral microphase separation of mixed homopolymer brushes grafted on silica particles. Macromolecules 47, 6824–6835 (2014)

    Article  CAS  ADS  Google Scholar 

  18. Williams, D. R. M. Grafted polymers in bad solvents: octopus surface micelles. J. Phys. II 3, 1313–1318 (1993)

    CAS  Google Scholar 

  19. Zhulina, E. B., Birshtein, T. M., Priamitsyn, V. A. & Klushin, L. I. Inhomogeneous structure of collapsed polymer brushes under deformation. Macromolecules 28, 8612–8620 (1995)

    Article  CAS  ADS  Google Scholar 

  20. Koutsos, V., van der Vegte, E. W., Pelletier, E., Stamouli, A. & Hadziioannou, G. Structure of chemically end-grafted polymer chains studied by scanning force microscopy in bad-solvent conditions. Macromolecules 30, 4719–4726 (1997)

    Article  CAS  ADS  Google Scholar 

  21. Choi, B. C., Choi, S. & Leckband, D. E. Poly(N-isopropyl acrylamide) brush topography: dependence on grafting conditions and temperature. Langmuir 29, 5841–5850 (2013)

    Article  CAS  Google Scholar 

  22. Erathodiyil, N. & Ying, J. Y. Functionalization of inorganic nanoparticles for bioimaging applications. Acc. Chem. Res. 44, 925–935 (2011)

    Article  CAS  Google Scholar 

  23. Minelli, C., Lowe, S. B. & Stevens, M. M. Engineering nanocomposite materials for cancer therapy. Small 6, 2336–2357 (2010)

    Article  CAS  Google Scholar 

  24. Saha, K., Agasti, S. S., Kim, C., Li, X. & Rotello, V. M. Gold nanoparticles in chemical and biological sensing. Chem. Rev. 112, 2739–2779 (2012)

    Article  CAS  Google Scholar 

  25. Wolf, B. A. & Willms, M. M. Measured and calculated solubility of polymers in mixed-solvents-co-non-solvency. Makromol. Chem. 179, 2265–2277 (1978)

    Article  CAS  Google Scholar 

  26. Bürgi, T. Properties of the gold–sulphur interface: from self-assembled monolayers to clusters. Nanoscale 7, 15553–15567 (2015)

    Article  ADS  Google Scholar 

  27. Rubinstein, M. & Colby, R. H. Polymer Physics 53 (Oxford Univ. Press, 2003)

  28. Zohar, N., Chuntonov, L. & Haran, G. The simplest plasmonic molecules: metal nanoparticle dimers and trimers. J. Photochem. Photobiol. C 21, 26–39 (2014)

    Article  CAS  Google Scholar 

  29. Choueiri, R., Klinkova, A., Thérien-Aubin, H., Rubinstein, M. & Kumacheva, E. Structural transitions in nanoparticle assemblies governed by competing nanoscale forces. J. Am. Chem. Soc. 135, 10262–10265 (2013)

    Article  CAS  Google Scholar 

  30. Klinkova, A. et al. Structural and optical properties of self-assembled chains of plasmonic nanocubes. Nano Lett. 14, 6314–6321 (2014)

    Article  CAS  ADS  Google Scholar 

  31. Lukach, A., Liu, K., Thérien-Aubin, H. & Kumacheva, E. Controlling the degree of polymerization, bond lengths and bond angles of plasmonic polymers. J. Am. Chem. Soc. 134, 18853–18859 (2012)

    Article  CAS  Google Scholar 

  32. Khabibullin, A., Mastan, E., Matyjaszewski, K. & Zhu, S. Surface-initiated atom transfer radical polymerization. Adv. Polym. Sci. 270, 29–76 (2015)

    Article  Google Scholar 

Download references


We thank the Connaught Foundation and the National Science and Engineering Research Council of Canada (Discovery and Canada Research Chair programmes) for financial support of this work. E.B.Z. acknowledges partial support from the Russian Foundation for Basic Research (grant 14-03-00372a) and from the Government of Russian Federation (grant 074-U01). M.R. acknowledges financial support from the National Science Foundation (grants DMR-1309892, DMR-1436201 and DMR-1121107), the National Institutes of Health (grants P01-HL108808 and 1UH2HL123645), and the Cystic Fibrosis Foundation. Research was in part carried out at the Center for Functional Nanomaterials, Brookhaven National Laboratory supported by the US Department of Energy, Office of Basic Energy Sciences (under contract number DE-SC0012704). R.M.C. acknowledges the Natural Sciences and Engineering Research Council of Canada for a PGS-D scholarship. A.K. acknowledges an Ontario Trillium Scholarship. We thank M. Michaelis and S. Lin for initiating preliminary experiments and I. Gourevich for help with imaging experiments.

Author information

Authors and Affiliations



E.K. and R.M.C. proposed the approach and designed the experiments for nanoparticle surface patterning. R.M.C. synthesized and surface-patterned polystyrene-coated gold nanospheres, nanodumbbells and nanorods, and conducted self-assembly experiments of patchy nanospheres in the presence of excess polymer. E.G. synthesized and surface-patterned polystyrene-capped gold nanospheres and silver nanocubes, as well as poly(N-vinyl carbazole)-functionalized nanospheres. E.G. and E.M.L. determined polystyrene grafting density on nanosphere surfaces. H.T.-A. synthesized polystyrene-co-PI and poly(4-vinyl pyridine) and surface-patterned nanosphere surfaces. R.M.C., E.G. and H.T.-A. statistically characterized the morphology of patchy nanospheres. A.K. synthesized triangular silver nanoprisms and nanocubes and conducted experiments on nanocube self-assembly. A.Q.-F. surface-patterned gold nanocubes and conducted self-assembly of patchy nanospheres. L.H. performed tomography experiments and H.L.X. and O.G. interpreted the data. E.B.Z. and M.R. developed the theoretical model describing polymer segregation on the nanosphere surface.

Corresponding author

Correspondence to Eugenia Kumacheva.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Additional information

Reviewer Information

Nature thanks I. Kretzschmar, D. Williams and the other anonymous reviewer(s) for their contribution to the peer review of this work.

Supplementary information

Supplementary Information

This file contains a description of the methods (synthesis, surface functionalization, polymer segregation experiments, self-assembly experiments, tomography, cross-linking), a description of the theoretical model with relevant equations, Supplementary Figures 1-27 (characterization of nanoparticles, statistical analyses of patchy species, schematics for theoretical model) and Supplementary Tables 1-3 (summaries of conditions used in methods). (PDF 4203 kb)

A rotational view of three dimensional reconstruction of the polymer coated gold particle around the x-axis

A rotational view of three dimensional reconstruction of the polymer coated gold particle around the x-axis (MPG 18417 kb)

A rotational view of three dimensional reconstruction of the polymer coated gold particle around the y-axis

A rotational view of three dimensional reconstruction of the polymer coated gold particle around the y-axis (MPG 18113 kb)

PowerPoint slides

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Choueiri, R., Galati, E., Thérien-Aubin, H. et al. Surface patterning of nanoparticles with polymer patches. Nature 538, 79–83 (2016).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing