Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Measurement-based control of a mechanical oscillator at its thermal decoherence rate


In real-time quantum feedback protocols1,2, the record of a continuous measurement is used to stabilize a desired quantum state. Recent years have seen successful applications of these protocols in a variety of well-isolated micro-systems, including microwave photons3 and superconducting qubits4. However, stabilizing the quantum state of a tangibly massive object, such as a mechanical oscillator, remains very challenging: the main obstacle is environmental decoherence, which places stringent requirements on the timescale in which the state must be measured. Here we describe a position sensor that is capable of resolving the zero-point motion of a solid-state, 4.3-megahertz nanomechanical oscillator in the timescale of its thermal decoherence, a basic requirement for real-time (Markovian) quantum feedback control tasks, such as ground-state preparation. The sensor is based on evanescent optomechanical coupling to a high-Q microcavity5, and achieves an imprecision four orders of magnitude below that at the standard quantum limit for a weak continuous position measurement6—a 100-fold improvement over previous reports7,8,9—while maintaining an imprecision–back-action product that is within a factor of five of the Heisenberg uncertainty limit. As a demonstration of its utility, we use the measurement as an error signal with which to feedback cool the oscillator. Using radiation pressure as an actuator, the oscillator is cold damped10 with high efficiency: from a cryogenic-bath temperature of 4.4 kelvin to an effective value of 1.1 ± 0.1 millikelvin, corresponding to a mean phonon number of 5.3 ± 0.6 (that is, a ground-state probability of 16 per cent). Our results set a new benchmark for the performance of a linear position sensor, and signal the emergence of mechanical oscillators as practical subjects for measurement-based quantum control.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Measuring and controlling the position of a nanomechanical beam using a near-field optomechanical transducer.
Figure 2: Measurement imprecision and back action versus intracavity photon number.
Figure 3: Radiation-pressure feedback cooling to near the ground state.

Similar content being viewed by others


  1. Wiseman, H. M. Quantum theory of continuous feedback. Phys. Rev. A 49, 2133–2150 (1994); erratum 49, 5159 (1994)

    Article  CAS  ADS  Google Scholar 

  2. Wiseman, H. M. & Milburn, G. J. Quantum Measurement and Control (Cambridge Univ. Press, 2009)

    Book  Google Scholar 

  3. Sayrin, C. et al. Real-time quantum feedback prepares and stabilizes photon number states. Nature 477, 73–77 (2011)

    Article  CAS  ADS  Google Scholar 

  4. Vijay, R. et al. Stabilizing Rabi oscillations in a superconducting qubit using quantum feedback. Nature 490, 77–80 (2012)

    Article  CAS  ADS  Google Scholar 

  5. Anetsberger, G. et al. Near-field cavity optomechanics with nanomechanical oscillators. Nature Phys. 5, 909–914 (2009)

    Article  CAS  ADS  Google Scholar 

  6. Clerk, A. A., Devoret, M. H., Girvin, S. M., Marquardt, F. & Schoelkopf, R. J. Introduction to quantum noise, measurement, and amplification. Rev. Mod. Phys. 82, 1155–1208 (2010)

    Article  ADS  MathSciNet  Google Scholar 

  7. Teufel, J. D., Donner, T., Castellanos-Beltran, M. A., Harlow, J. W. & Lehnert, K. W. Nanomechanical motion measured with an imprecision below that at the standard quantum limit. Nature Nanotechnol. 4, 820–823 (2009)

    Article  CAS  ADS  Google Scholar 

  8. Anetsberger, G. et al. Measuring nanomechanical motion with an imprecision below the standard quantum limit. Phys. Rev. A 82, 061804(R) (2010)

    Article  ADS  Google Scholar 

  9. Westphal, T. et al. Interferometer readout noise below the standard quantum limit of a membrane. Phys. Rev. A 85, 063806 (2012)

    Article  ADS  Google Scholar 

  10. Cohadon, P. F., Heidmann, A. & Pinard, M. Cooling of a mirror by radiation pressure. Phys. Rev. Lett. 83, 3174–3177 (1999)

    Article  CAS  ADS  Google Scholar 

  11. LIGO. Scientific Collaboration. Observation of a kilogram-scale oscillator near its quantum ground state. New J. Phys. 11, 073032 (2009)

  12. Bushev, P. et al. Feedback cooling of a single trapped ion. Phys. Rev. Lett. 96, 043003 (2006)

    Article  ADS  Google Scholar 

  13. D’Urso, B., Odom, B. & Gabrielse, G. Feedback cooling of a one-electron oscillator. Phys. Rev. Lett. 90, 043001 (2003)

    Article  ADS  Google Scholar 

  14. Hatridge, M. et al. Quantum back-action of an individual variable-strength measurement. Science 339, 178–181 (2013)

    Article  CAS  ADS  MathSciNet  Google Scholar 

  15. Caves, C. M. Quantum-mechanical radiation-pressure fluctuations in an interferometer. Phys. Rev. Lett. 45, 75–79 (1980)

    Article  ADS  Google Scholar 

  16. Aspelmeyer, M., Kippenberg, T. J. & Marquardt, F. Cavity optomechanics. Rev. Mod. Phys. 86, 1391–1452 (2014)

    Article  ADS  Google Scholar 

  17. Courty, J.-M., Heidmann, A. & Pinard, M. Quantum limits of cold damping with optomechanical coupling. Eur. Phys. J. D 17, 399–408 (2001)

    Article  CAS  ADS  Google Scholar 

  18. Szorkovszky, A., Doherty, A. C., Harris, G. I. & Bowen, W. P. Mechanical squeezing via parametric amplification and weak measurement. Phys. Rev. Lett. 107, 213603 (2011)

    Article  CAS  ADS  Google Scholar 

  19. Mancini, S., Vitali, D. & Tombesi, P. Optomechanical cooling of a macroscopic oscillator by homodyne feedback. Phys. Rev. Lett. 80, 688–691 (1998)

    Article  CAS  ADS  Google Scholar 

  20. Genes, C., Vitali, D., Tombesi, P., Gigan, S. & Aspelmeyer, M. Ground-state cooling of a micromechanical oscillator: comparing cold damping and cavity-assisted cooling schemes. Phys. Rev. A 77, 033804 (2008); erratum 79, 039903 (2009)

    Article  ADS  Google Scholar 

  21. Chan, J. et al. Laser cooling of a nanomechanical oscillator into its quantum ground state. Nature 478, 89–92 (2011)

    Article  CAS  ADS  Google Scholar 

  22. Teufel, J. D. et al. Sideband cooling of micromechanical motion to the quantum ground state. Nature 475, 359–363 (2011)

    Article  CAS  ADS  Google Scholar 

  23. Verhagen, E., Deléglise, S., Weis, S., Schliesser, A. & Kippenberg, T. J. Quantum-coherent coupling of a mechanical oscillator to an optical cavity mode. Nature 482, 63–67 (2012)

    Article  CAS  ADS  Google Scholar 

  24. Wiseman, H. M. Using feedback to eliminate back-action in quantum measurements. Phys. Rev. A 51, 2459–2468 (1995)

    Article  CAS  ADS  Google Scholar 

  25. Purdy, T. P., Peterson, R. W. & Regal, C. A. Observation of radiation pressure shot noise on a macroscopic object. Science 339, 801–804 (2013)

    Article  CAS  ADS  Google Scholar 

  26. Murch, K. W., Moore, K. L., Gupta, S. & Stamper-Kurn, D. M. Observation of quantum-measurement backaction with an ultracold atomic gas. Nature Phys. 4, 561–564 (2008)

    Article  CAS  Google Scholar 

  27. Gavartin, E., Verlot, P. & Kippenberg, T. J. A hybrid on-chip optomechanical transducer for ultrasensitive force measurements. Nature Nanotechnol. 7, 509–514 (2012)

    Article  CAS  ADS  Google Scholar 

  28. Poggio, M., Degen, C., Mamin, H. & Rugar, D. Feedback cooling of a cantilever’s fundamental mode below 5 mK. Phys. Rev. Lett. 99, 017201 (2007)

    Article  CAS  ADS  Google Scholar 

  29. Li, T., Kheifets, S. & Raizen, M. G. Millikelvin cooling of an optically trapped microsphere in vacuum. Nature Phys. 7, 527–530 (2011)

    Article  CAS  ADS  Google Scholar 

  30. Jacobs, K., Nurdin, H. I., Strauch, F. W. & James, M. Comparing resolved-sideband cooling and measurement-based feedback cooling on an equal footing: analytical results in the regime of ground-state cooling. Phys. Rev. A 91, 043812 (2015)

    Article  ADS  Google Scholar 

Download references


We acknowledge nanofabrication advice from E. Gavartin in the early stages of the project. All samples were fabricated at the CMi (Center for Micro-Nanotechnology) at EPFL. Research was funded by an ERC Advanced Grant (QuREM), by the DARPA/MTO ORCHID programme, the Marie Curie Initial Training Network ‘Cavity Quantum Optomechanics’ (cQOM), the Swiss National Science Foundation and through support from the NCCR of Quantum Engineering (QSIT). N.P. and D.J.W. acknowledge support from the European Commission through Marie Skodowska-Curie Fellowships: IEF project 303029 and IIF project 331985, respectively.

Author information

Authors and Affiliations



R.S., A.G. and D.J.W. contributed to the design and initial characterization of the device. R.S. developed, implemented and optimized the fabrication process. A.G. developed and implemented a numerical model to aid in device optimization. D.J.W., V.S. and N.P. conceived of, designed and performed the experiment. V.S. and D.J.W. analysed the data with support from N.P. V.S. developed the theoretical framework of the experiment with support from D.J.W. and N.P. V.S. wrote sections I and II of the Supplementary Information. R.S., V.S., D.J.W. and A.G. wrote section III of the Supplementary Information. D.J.W., N.P. and V.S. wrote sections IV and V of the Supplementary Information. D.J.W. wrote the main text with support from all other authors. T.J.K. oversaw all aspects of the work.

Corresponding author

Correspondence to T. J. Kippenberg.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

This file contains Supplementary Text and Data, Supplementary Figures 1–8, Supplementary Table 1 and additional references (see Contents for details). (PDF 5707 kb)

PowerPoint slides

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wilson, D., Sudhir, V., Piro, N. et al. Measurement-based control of a mechanical oscillator at its thermal decoherence rate. Nature 524, 325–329 (2015).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing