Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Solution-processed, high-performance light-emitting diodes based on quantum dots


Solution-processed optoelectronic and electronic devices are attractive owing to the potential for low-cost fabrication of large-area devices and the compatibility with lightweight, flexible plastic substrates. Solution-processed light-emitting diodes (LEDs) using conjugated polymers or quantum dots as emitters have attracted great interest over the past two decades1,2. However, the overall performance of solution-processed LEDs2,3,4,5—including their efficiency, efficiency roll-off at high current densities, turn-on voltage and lifetime under operational conditions—remains inferior to that of the best vacuum-deposited organic LEDs6,7,8. Here we report a solution-processed, multilayer quantum-dot-based LED with excellent performance and reproducibility. It exhibits colour-saturated deep-red emission, sub-bandgap turn-on at 1.7 volts, high external quantum efficiencies of up to 20.5 per cent, low efficiency roll-off (up to 15.1 per cent of the external quantum efficiency at 100 mA cm−2), and a long operational lifetime of more than 100,000 hours at 100 cd m−2, making this device the best-performing solution-processed red LED so far, comparable to state-of-the-art vacuum-deposited organic LEDs2,3,4,5,6,7,8. This optoelectronic performance is achieved by inserting an insulating layer between the quantum dot layer and the oxide electron-transport layer to optimize charge balance in the device and preserve the superior emissive properties of the quantum dots. We anticipate that our results will be a starting point for further research, leading to high-performance, all-solution-processed quantum-dot-based LEDs ideal for next-generation display and solid-state lighting technologies.

This is a preview of subscription content, access via your institution

Relevant articles

Open Access articles citing this article.

Access options

Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.

Figure 1: Multilayer QLED device.
Figure 2: Device performance.
Figure 3: Impacts of the 6 nm PMMA layer.


  1. Friend, R. H. et al. Electroluminescence in conjugated polymers. Nature 397, 121–128 (1999)

    Article  CAS  ADS  Google Scholar 

  2. Supran, G. J. et al. QLEDs for displays and solid-state lighting. MRS Bull. 38, 703–711 (2013)

    Article  Google Scholar 

  3. Mashford, B. S. et al. High-efficiency quantum-dot light-emitting devices with enhanced charge injection. Nature Photon. 7, 407–412 (2013)

    Article  CAS  ADS  Google Scholar 

  4. Chien, C.-H. et al. Electrophosphorescent polyfluorenes containing osmium complexes in the conjugated backbone. Adv. Funct. Mater. 18, 1430–1439 (2008)

    Article  CAS  Google Scholar 

  5. Yook, K. S. & Lee, J. Y. Small molecule host materials for solution processed phosphorescent organic light-emitting diodes. Adv. Mater. 26, 4218–4233 (2014)

    Article  CAS  Google Scholar 

  6. Meerheim, R. et al. Influence of charge balance and exciton distribution on efficiency and lifetime of phosphorescent organic light-emitting devices. J. Appl. Phys. 104, 014510 (2008)

    Article  ADS  Google Scholar 

  7. Nakanotani, H. et al. High-efficiency organic light-emitting diodes with fluorescent emitters. Nature Commun. 5, 4016 (2014)

    Article  CAS  ADS  Google Scholar 

  8. Murawski, C., Leo, K. & Gather, M. C. Efficiency roll-off in organic light-emitting diodes. Adv. Mater. 25, 6801–6827 (2013)

    Article  CAS  Google Scholar 

  9. Brus, L. E. Electron-electron and electron-hole interactions in small semiconductor crystallites: the size dependence of the lowest excited electronic state. J. Chem. Phys. 80, 4403–4409 (1984)

    Article  CAS  ADS  Google Scholar 

  10. Murray, C. B., Kagan, C. R. & Bawendi, M. G. Synthesis and characterization of monodisperse nanocrystals and close-packed nanocrystal assemblies. Annu. Rev. Mater. Sci. 30, 545–610 (2000)

    Article  CAS  ADS  Google Scholar 

  11. Peng, X. G. An essay on synthetic chemistry of colloidal nanocrystals. Nano Res. 2, 425–447 (2009)

    Article  CAS  Google Scholar 

  12. Colvin, V. L., Schlamp, M. C. & Alivisatos, A. P. Light-emitting diodes made from cadmium selenide nanocrystals and a semiconducting polymer. Nature 370, 354–357 (1994)

    Article  CAS  ADS  Google Scholar 

  13. Coe, S., Woo, W.-K., Bawendi, M. G. & Bulovic, V. Electroluminescence from single monolayers of nanocrystals in molecular organic devices. Nature 420, 800–803 (2002)

    Article  CAS  ADS  Google Scholar 

  14. Zhao, J. et al. Efficient CdSe/CdS quantum dot light-emitting diodes using a thermally polymerized hole transport layer. Nano Lett. 6, 463–467 (2006)

    Article  CAS  ADS  Google Scholar 

  15. Caruge, J. M., Halpert, J. E., Wood, V., Bulovic, V. & Bawendi, M. G. Colloidal quantum-dot light-emitting diodes with metal-oxide charge transport layers. Nature Photon. 2, 247–250 (2008)

    Article  CAS  Google Scholar 

  16. Cho, K.-S. et al. High-performance crosslinked colloidal quantum-dot light-emitting diodes. Nature Photon. 3, 341–345 (2009)

    Article  CAS  ADS  Google Scholar 

  17. Qian, L., Zheng, Y., Xue, J. & Holloway, P. H. Stable and efficient quantum-dot light-emitting diodes based on solution-processed multilayer structures. Nature Photon. 5, 543–548 (2011)

    Article  CAS  ADS  Google Scholar 

  18. Kwak, J. et al. Bright and efficient full-color colloidal quantum dot light-emitting diodes using an inverted device structure. Nano Lett. 12, 2362–2366 (2012)

    Article  CAS  ADS  Google Scholar 

  19. Bae, W. K. et al. Controlling the influence of auger recombination on the performance of quantum-dot light-emitting diodes. Nature Commun. 4, 2661 (2013)

    Article  ADS  Google Scholar 

  20. Lee, K.-H. et al. Over 40 cd/A efficient green quantum dot electroluminescent device comprising uniquely large-sized quantum dots. ACS Nano 8, 4893–4901 (2014)

    Article  CAS  Google Scholar 

  21. Thesen, M. W. et al. Hole-transporting host-polymer series consisting of triphenylamine basic structures for phosphorescent polymer light-emitting diodes. J. Polym. Sci. A 48, 3417–3430 (2010)

    Article  CAS  Google Scholar 

  22. Lee, D.-H., Liu, Y.-P., Lee, K.-H., Chae, H. & Cho, S. M. Effect of hole transporting materials in phosphorescent white polymer light-emitting diodes. Org. Electron. 11, 427–433 (2010)

    Article  CAS  Google Scholar 

  23. Sayyah, S. M., Khaliel, A. B. & Moustafa, H. Electronic structure and ground state properties of PMMA polymer: I. Step-by-step formation and stereo-regularity of the polymeric chain—AM1-MO treatment. Int. J. Polym. Mater. 54, 505–518 (2005)

    Article  CAS  Google Scholar 

  24. Qin, H. Y. et al. Single-dot spectroscopy of zinc-blende CdSe/CdS core/shell nanocrystals: nonblinking and correlation with ensemble measurements. J. Am. Chem. Soc. 136, 179–187 (2014)

    Article  CAS  Google Scholar 

  25. Wellmann, P. et al. High-efficiency p-i-n organic light-emitting diodes with long lifetime. J. Soc. Inf. Disp. 13, 393–397 (2005)

    Article  CAS  Google Scholar 

  26. Greenham, N. C., Friend, R. H. & Bradley, D. D. C. Angular dependence of the emission from a conjugated polymer light-emitting diode: implications for efficiency calculations. Adv. Mater. 6, 491–494 (1994)

    Article  CAS  Google Scholar 

  27. Javaux, C. et al. Thermal activation of non-radiative auger recombination in charged colloidal nanocrystals. Nature Nanotechnol. 8, 206–212 (2013)

    Article  CAS  ADS  Google Scholar 

  28. Nan, W. N. et al. Crystal structure control of zinc-blende CdSe/CdS core/shell nanocrystals: synthesis and structure-dependent optical properties. J. Am. Chem. Soc. 134, 19685–19693 (2012)

    Article  CAS  Google Scholar 

  29. Qian, L. et al. Electroluminescence from light-emitting polymer/ZnO nanoparticle heterojunctions at sub-bandgap voltages. Nano Today 5, 384–389 (2010)

    Article  CAS  Google Scholar 

  30. Forrest, S. R., Bradley, D. D. C. & Thompson, M. E. Measuring the efficiency of organic light-emitting devices. Adv. Mater. 15, 1043–1048 (2003)

    Article  CAS  Google Scholar 

  31. Humphries, M. J., Wilson, R. J., Fernandez, O. & Archer, R. A. Developments in solution processable polymer light-emitting diodes. J. Photon. Energy 1, 011019 (2011)

    Article  Google Scholar 

  32. Giridhar, T. et al. An electron transporting unit linked multifunctional Ir(III) complex: a promising strategy to improve the performance of solution-processed phosphorescent organic light-emitting diodes. Chem. Commun. 50, 4000–4002 (2014)

    Article  CAS  Google Scholar 

  33. Andrade, B. D. et al. Phosphorescent OLEDs with saturated colors. Proc. SPIE. 6655, 66550G (2007)

    Google Scholar 

  34. Uoyama, H., Goushi, K., Shizu, K., Nomura, H. & Adachi, C. Highly efficient organic light-emitting diodes from delayed fluorescence. Nature 492, 234–238 (2012)

    Article  CAS  ADS  Google Scholar 

Download references


This work is financially supported by the National High Technology Research and Development Program of China (2011AA050520), the National Natural Science Foundation of China (21233005 and 51172203), the Natural Science Funds for Distinguished Young Scholar of Zhejiang Province (R4110189), the Public Welfare Project of Zhejiang Province (2013C31057), the Jiangsu Natural Science Foundation (BK20130006 and BK20131413), the National Basic Research Program of China (2015CB932200) and the Jiangsu Specially-Appointed Professor programme. We thank L. Liao and L. Zhang for assistance in cross-measuring the QLED and OLED devices. We thank Q. Chen for assistance with atomic force microscopy and scanning Kelvin probe microscopy measurements. We thank Z. Zhang and C. Jin for assistance with cross-sectional transmission electron microscopy experiments. We also thank J. Yu and G. Qian for assistance in obtaining the confocal images.

Author information

Authors and Affiliations



Y.J. and X.P. had the idea for and designed the experiments and supervised the work. X.D. carried out the device fabrication and characterizations. Z.Z. conducted the optical measurements and participated in device fabrication. Y.N. and H.C. synthesized the quantum dots. X.L. and L.C. carried out the atomic force microscopy and scanning Kelvin probe microscopy experiments. Y.J. wrote the first draft of the manuscript. X.P. and J.W. provided major revisions. All authors discussed the results and commented on the manuscript.

Corresponding authors

Correspondence to Yizheng Jin or Xiaogang Peng.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Extended data figures and tables

Extended Data Figure 1 CdSe–CdS core–shell quantum dots with ten monolayers of CdS shell.

a, A typical TEM image. Scale bar, 20 nm. b, X-ray diffraction profile. c, Ultraviolet–visible absorption and photoluminance spectra.

Extended Data Figure 2 ZnO nanocrystals as ETLs.

a, Ultraviolet–visible absorption spectrum and a typical TEM image (inset: scale bar, 50 nm) of the colloidal ZnO nanocrystals. b, Current density–voltage (JV) characteristics of an electron-only device (ITO/Al/ZnO/Al). The thickness of the ZnO layer is 300 nm. The electron mobility of the ZnO film is obtained by fitting space-charge-limited-current region (J V2) with Child’s law, , where ε0, εr, μe and d are the vacuum permittivity, relative permittivity, electron mobility and film thickness, respectively17. By assuming that εr = 4, μe is determined to be 1.8 × 10−3 cm2 V−1 s−1.

Extended Data Figure 3 AFM characterizations of the multilayers of PEDOT:PSS, poly-TPD, PVK, quantum dots, PMMA and ZnO films in the device configuration, respectively.

For each layer, the height image, the line-scan profile, the pseudo-three-dimensional image and the phase image are shown. Note that the surface root mean squared values may change owing to the tip-to-tip and sample-to-sample variations. Extensive AFM measurements show that the root mean squared roughnesses for the quantum dot layer and the PMMA layer are in the ranges of 1.6–2.6 nm and 0.6–1.6 nm, respectively.

Extended Data Figure 4 Scanning Kelvin probe microscopy characterizations of the multilayers of PEDOT:PSS, poly-TPD, PVK, quantum dots, PMMA and ZnO films in the device configuration.

Note that the data have been linearly fitted to show the spatial uniformity.

Extended Data Figure 5 FTIR analyses to determine the average thickness of the PMMA layers used in the QLEDs.

The sample for FTIR measurements was produced by layer-by-layer spin-coating the PVK (in m-xylene, 1.5 mg ml−1), quantum dots (in octane, 15 mg ml−1) and PMMA (in acetone, 1.8 mg ml−1) at 2,000 r.p.m. onto the cleaned CaF2 substrates. We assume that the average thickness of the PMMA layer in this sample is identical to that of the PMMA layer in the optimized QLEDs. The absorption of the carbonylic groups of this sample was measured multiple times, averaged and compared with that of a 90 nm PMMA film (determined by stylus profilometer). Given that the absorbance of the carbonylic groups is in the dynamic range of the instrument, the thickness of the PMMA layer deposited onto the quantum dot film was determined to be 6 nm.

Extended Data Figure 6 Electrical measurements on the electron-only devices (ITO/Al/QDs/ZnO/Al) and the hole-only devices (ITO/PEDOT:PSS/poly-TPD/PVK/QDs/Pd).

The current density of the electron-only device (ITO/Al/QDs/ZnO/Al) is more than one order of magnitude greater than that of the hole-only device (ITO/PEDOT:PSS/poly-TPD/PVK/QDs/Pd). In the above two devices, the thicknesses of all layers are identical to those used in the QLEDs. For the quantum dot layer, the thickness is 40 nm. We note that for quasi-type-II CdSe–CdS quantum dots, the electron wavefunction extends to the shell region, whereas the hole wavefunction remains confined to the CdSe core, leading to greater electron mobility than hole mobility. We presume that the recombination zone is close to the PVK/QDs interface due to the very low hole mobility of the quantum dot films. Therefore we also fabricated a hole-only device with a quantum dot layer of 20 nm. The results show that the current density of the hole-only device with the 20 nm quantum dot layer is still much smaller than that of the electron-only device with the 40 nm quantum dot layer.

Extended Data Figure 7 Impact of the thickness of the PMMA layer on the QLED performance.

a, Current density–applied bias curves for the electron-only devices (ITO/Al/QDs/PMMA/ZnO/Al). b, c, Current density–driving voltage (b) and luminance–driving voltage (c) curves for the QLEDs (ITO/PEDOT:PSS/poly-TPD/PVK/QDs/PMMA/ZnO/Ag). d, Dependence of peak EQEs and turn-on voltages (Vth) of the QLEDs on the thicknesses of the PMMA layers. The PMMA layers with thicknesses of 5, 6, 7, 8 and 10 nm were deposited from acetone solutions with concentrations of 1.5, 1.8, 2.1, 2.4 and 3.0 mg ml−1, respectively.

Extended Data Figure 8 QLEDs with four-monolayer-shell CdSe–CdS quantum dots as emitters.

a, Current density and luminance versus driving voltage characteristics. b, Curves of EQE versus driving voltage. The thicknesses of the PEDOT:PSS, poly-TPD, PVK, quantum dot, PMMA and ZnO layers are 35, 30, 5, 30, 6 and 150 nm, respectively.

Extended Data Figure 9 QLED characterization system.

a, A Keithley 2400 electrometer is used to obtain current density–voltage characteristics. A fibre integration sphere (FOIS-1) coupled with a QE-65000 spectrometer is used for light output measurements. b, Top-view and side-view of the QLEDs in direct contact with the input port of the fibre integration sphere. The glass substrate (19 mm × 19 mm) is rested on top of (but not inserted into) the integration sphere. The area of the QLED device (4 mm2) is much smaller than that of the input port (9.5 mm in diameter) of the integration sphere so that the coupling factor for the photons emitted into the forward viewing directions (from the QLED to the integration sphere) is unity.

Extended Data Table 1 Comparison of our device with other high-performance red LEDs

PowerPoint slides

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Dai, X., Zhang, Z., Jin, Y. et al. Solution-processed, high-performance light-emitting diodes based on quantum dots. Nature 515, 96–99 (2014).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing