Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation

Nature volume 495, pages 80–84 (2013)Cite this article

Subjects

Abstract

The energy costs associated with the separation and purification of industrial commodities, such as gases, fine chemicals and fresh water, currently represent around 15 per cent of global energy production, and the demand for such commodities is projected to triple by 2050 (ref. 1). The challenge of developing effective separation and purification technologies that have much smaller energy footprints is greater for carbon dioxide (CO2) than for other gases; in addition to its involvement in climate change, CO2 is an impurity in natural gas, biogas (natural gas produced from biomass), syngas (CO/H2, the main source of hydrogen in refineries) and many other gas streams. In the context of porous crystalline materials that can exploit both equilibrium and kinetic selectivity, size selectivity and targeted molecular recognition are attractive characteristics for CO2 separation and capture, as exemplified by zeolites 5A and 13X (ref. 2), as well as metal–organic materials (MOMs)3,4,5,6,7,8,9. Here we report that a crystal engineering7 or reticular chemistry5,9 strategy that controls pore functionality and size in a series of MOMs with coordinately saturated metal centres and periodically arrayed hexafluorosilicate (SiF62−) anions enables a ‘sweet spot’ of kinetics and thermodynamics that offers high volumetric uptake at low CO2 partial pressure (less than 0.15 bar). Most importantly, such MOMs offer an unprecedented CO2 sorption selectivity over N2, H2 and CH4, even in the presence of moisture. These MOMs are therefore relevant to CO2 separation in the context of post-combustion (flue gas, CO2/N2), pre-combustion (shifted synthesis gas stream, CO2/H2) and natural gas upgrading (natural gas clean-up, CO2/CH4).

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Figure 1: The variable pore size channel structures of SIFSIX-2-Cu, SIFSIX-2-Cu-i and SIFSIX-3-Zn.
Figure 2: Pure gas adsorption, modelling and gas mixture breakthrough studies of SIFSIX compounds.
Figure 3: Gas mixture selectivity of SIFSIX compounds and the stability study of SIFSIX-2-Cu-i.

Similar content being viewed by others

References

  1. Taylor, P. Energy Technology Perspectives 2010 — Scenarios and Strategies to 2050 74 (International Energy Agency, Paris, 2010)

  2. Merel, J., Clausse, M. & Meunier, F. Experimental investigation on CO2 post-combustion capture by indirect thermal swing adsorption using 13X and 5A zeolites. Ind. Eng. Chem. Res. 47, 209–215 (2008)

    Article  CAS  Google Scholar 

  3. MacGillivray, L. R. Metal-Organic Frameworks: Design and Application (Wiley & Sons, 2010)

    Book  Google Scholar 

  4. Li, H., Eddaoudi, M., O’Keeffe, M. & Yaghi, O. M. Design and synthesis of an exceptionally stable and highly porous metal-organic framework. Nature 402, 276–279 (1999)

    Article  CAS  ADS  Google Scholar 

  5. Eddaoudi, M. et al. Systematic design of pore size and functionality in isoreticular MOFs and their application in methane storage. Science 295, 469–472 (2002)

    Article  CAS  ADS  Google Scholar 

  6. Farha, O. K. et al. Metal–organic framework materials with ultrahigh surface areas: is the sky the limit? J. Am. Chem. Soc. 134, 15016–15021 (2012)

    Article  CAS  Google Scholar 

  7. Moulton, B. & Zaworotko, M. J. From molecules to crystal engineering: supramolecular isomerism and polymorphism in network solids. Chem. Rev. 101, 1629–1658 (2001)

    Article  CAS  Google Scholar 

  8. Kitagawa, S., Kitaura, R. & Noro, S. Functional porous coordination polymers. Angew. Chem. Int. Edn 43, 2334–2375 (2004)

    Article  CAS  Google Scholar 

  9. Yaghi, O. M. et al. Reticular synthesis and the design of new materials. Nature 423, 705–714 (2003)

    Article  CAS  ADS  Google Scholar 

  10. Caskey, S. R., Wong Foy, A. G. & Matzger, A. J. Dramatic tuning of carbon dioxide uptake via metal substitution in a coordination polymer with cylindrical pores. J. Am. Chem. Soc. 130, 10870–10871 (2008)

    Article  CAS  Google Scholar 

  11. Sumida, K. et al. Carbon dioxide capture in metal–organic frameworks. Chem. Rev. 112, 724–781 (2012)

    Article  CAS  Google Scholar 

  12. Kizzie, A. C., Wong Foy, A. G. & Matzger, A. J. Effect of humidity on the performance of microporous coordination polymers as adsorbents for CO2 capture. Langmuir 27, 6368–6373 (2011)

    Article  CAS  Google Scholar 

  13. Subramanian, S. & Zaworotko, M. J. Porous solids by design — [Zn(4,4'-bpy)2(SiF6)n]-xDMF, a single framework octahedral coordination polymer with large square channels. Angew. Chem. Int. Edn 34, 2127–2129 (1995)

    Article  CAS  Google Scholar 

  14. Noro, S., Kitagawa, S., Kondo, M. & Seki, K. A new methane adsorbent, porous coordination polymer [CuSiF6(4,4′-bipyridine)2]n . Angew. Chem. Int. Edn 39, 2081–2084 (2000)

    Article  CAS  Google Scholar 

  15. Burd, S. D. et al. Highly selective carbon dioxide uptake by [Cu(bpy-n)2(SiF6)] (bpy-1 = 4,4′-bipyridine; bpy-2 = 1,2-bis(4-pyridyl)ethene). J. Am. Chem. Soc. 134, 3663–3666 (2012)

    Article  CAS  Google Scholar 

  16. Coe, B. J. et al. Syntheses, spectroscopic and molecular quadratic nonlinear optical properties of dipolar ruthenium(II) complexes of the ligand 1,2-phenylenebis(dimethylarsine). Dalton Trans. (18), 2935–2942 (2004)

  17. Uemura, K., Maeda, A., Maji, T. K., Kanoo, P. & Kita, H. Syntheses, crystal structures and adsorption properties of ultramicroporous coordination polymers constructed from hexafluorosilicate ions and pyrazine. Eur. J. Inorg. Chem. (16), 2329–2337 (2009)

  18. Jagiello, J. & Thommes, M. Comparison of DFT characterization methods based on N2, Ar, CO2, and H2 adsorption applied to carbons with various pore size distributions. Carbon 42, 1227–1232 (2004)

    Article  CAS  Google Scholar 

  19. Ma, S. et al. Framework-catenation isomerism in metal−organic frameworks and its impact on hydrogen uptake. J. Am. Chem. Soc. 129, 1858–1859 (2007)

    Article  CAS  Google Scholar 

  20. Llewellyn, P. L. et al. High uptakes of CO2 and CH4 in mesoporous metal-organic frameworks MIL-100 and MIL-101. Langmuir 24, 7245–7250 (2008)

    Article  CAS  Google Scholar 

  21. Lässig, D. et al. A microporous copper metal–organic framework with high H2 and CO2 adsorption capacity at ambient pressure. Angew. Chem. Int. Edn 123, 10528–10532 (2011)

    Article  Google Scholar 

  22. Yazaydın, A. O. et al. Enhanced CO2 adsorption in metal-organic frameworks via occupation of open-metal sites by coordinated water molecules. Chem. Mater. 21, 1425–1430 (2009)

    Article  Google Scholar 

  23. Myers, A. L. & Prausnitz, J. M. Thermodynamics of mixed-gas adsorption. Am. Inst. Chem. Eng. J. 11, 121–127 (1965)

    Article  CAS  Google Scholar 

  24. Ho, M. T., Allinson, G. W. & Wiley, D. E. Reducing the cost of CO2 capture from flue gases using pressure swing adsorption. Ind. Eng. Chem. Res. 47, 4883–4890 (2008)

    Article  CAS  Google Scholar 

  25. Xiang, S. et al. Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions. Nature Commun. 3, 954 (2012)

    Article  ADS  Google Scholar 

  26. Cavenati, S., Grande, C. A. & Rodrigues, A. E. Adsorption equilibrium of methane, carbon dioxide, and nitrogen on zeolite 13X at high pressures. J. Chem. Eng. Data 49, 1095–1101 (2004)

    Article  CAS  Google Scholar 

  27. Vaidhyanathan, R. et al. Direct observation and quantification of CO2 binding within an amine-functionalized nanoporous solid. Science 330, 650–653 (2010)

    Article  CAS  ADS  Google Scholar 

  28. Belmabkhout, Y., Serna-Guerrero, R. & Sayari, A. Adsorption of CO2-containing gas mixtures over amine-bearing pore-expanded MCM-41 silica: application for gas purification. Ind. Eng. Chem. Res. 49, 359–365 (2010)

    Article  CAS  Google Scholar 

  29. Herm, Z. R., Swisher, J. A., Smit, B., Krishna, R. & Long, J. R. Metal-organic frameworks as adsorbents for hydrogen purification and precombustion carbon dioxide capture. J. Am. Chem. Soc. 133, 5664–5667 (2011)

    Article  CAS  Google Scholar 

  30. Han, S. et al. High-throughput screening of metal–organic frameworks for CO2 separation. ACS Combinat. Sci. 14, 263–267 (2012)

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This publication is based on work supported by KAUST award number FIC/2010/06 (M.E. and M.J.Z.) and KAUST start up funds (M.E.). B.S. acknowledges computational resources made available by an XSEDE grant (number TG-DMR090028). Single-crystal diffraction experiments on SIFSIX-2-Cu-i were conducted at the Advanced Photon Source on beamline 15ID-B of ChemMatCARS Sector 15, which is principally supported by the National Science Foundation/Department of Energy under grant number NSF/CHE-0822838. Use of the Advanced Photon Source was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences under contract number DE-AC02-06CH11357.

Author information

Author notes

  1. Patrick Nugent and Youssef Belmabkhout: These authors contributed equally to this work.

Authors and Affiliations

  1. Department of Chemistry, University of South Florida, 4202 East Fowler Avenue, Tampa, Florida 33620, USA,

    Patrick Nugent, Stephen D. Burd, Katherine Forrest, Tony Pham, Shengqian Ma, Brian Space, Lukasz Wojtas, Mohamed Eddaoudi & Michael J. Zaworotko

  2. Division of Physical Sciences and Engineering, Advanced Membranes and Porous Materials Center, 4700 King Abdullah University of Science and Technology (KAUST), Thuwal, 23955-6900, Saudi Arabia

    Youssef Belmabkhout, Amy J. Cairns, Ryan Luebke & Mohamed Eddaoudi

Authors
  1. Patrick Nugent
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Youssef Belmabkhout
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Stephen D. Burd
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Amy J. Cairns
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Ryan Luebke
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Katherine Forrest
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Tony Pham
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Shengqian Ma
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Brian Space
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Lukasz Wojtas
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. Mohamed Eddaoudi
    View author publications

    You can also search for this author in PubMed Google Scholar

  12. Michael J. Zaworotko
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

P.N., S.D.B. and M.J.Z. contributed to the conceptual approach to designing the materials synthetic experiments; P.N. and S.D.B. carried out the materials synthesis ; L.W. and R.L. conducted and interpreted the crystallographic experiments; P.N., S.D.B., Y.B., S.M., M.E. and A.J.C. conducted and interpreted low-pressure sorption experiments; Y.B. and M.E. contributed to the initial ideas, conceptualizing, designing, conducting (Y.B.) and interpreting sorption experiments for gas separation of various industrially relevant gas mixtures (high-pressure single and mixed gas sorption experiments, sorption kinetics and breakthrough experiments) and IAST calculations; K.F., T.P. and B.S. conducted electrostatic models of gas sorption; and M.E. and M.J.Z. wrote the manuscript.

Corresponding authors

Correspondence to Mohamed Eddaoudi or Michael J. Zaworotko.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Additional information

Supplementary crystallographicdata for this manuscript has been deposited at the Cambridge Crystallographic Data Centre under deposition numbers CCDC 914600 and 914601. These data can be obtained free of charge from http://www.ccdc.cam.ac.uk/data_request/cif.

Supplementary information

Supplementary Information

This file contains Supplementary Text and Data, Supplementary Schemes 1-3, Supplementary Tables 1-4, Supplementary Figures 1-28 and Supplementary References. (PDF 6447 kb)

PowerPoint slides

Rights and permissions

Reprints and permissions

About this article

Cite this article

Nugent, P., Belmabkhout, Y., Burd, S. et al. Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation. Nature 495, 80–84 (2013). https://doi.org/10.1038/nature11893

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nature11893

This article is cited by

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing