Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Layered boron nitride as a release layer for mechanical transfer of GaN-based devices

Nature volume 484, pages 223–227 (2012)Cite this article

Subjects

Abstract

Nitride semiconductors are the materials of choice for a variety of device applications, notably optoelectronics1,2 and high-frequency/high-power electronics3. One important practical goal is to realize such devices on large, flexible and affordable substrates, on which direct growth of nitride semiconductors of sufficient quality is problematic. Several techniques—such as laser lift-off4,5—have been investigated to enable the transfer of nitride devices from one substrate to another, but existing methods still have some important disadvantages. Here we demonstrate that hexagonal boron nitride (h-BN) can form a release layer that enables the mechanical transfer of gallium nitride (GaN)-based device structures onto foreign substrates. The h-BN layer serves two purposes: it acts as a buffer layer for the growth of high-quality GaN-based semiconductors, and provides a shear plane that makes it straightforward to release the resulting devices. We illustrate the potential versatility of this approach by using h-BN-buffered sapphire substrates to grow an AlGaN/GaN heterostructure with electron mobility of 1,100 cm2 V−1 s−1, an InGaN/GaN multiple-quantum-well structure, and a multiple-quantum-well light-emitting diode. These device structures, ranging in area from five millimetres square to two centimetres square, are then mechanically released from the sapphire substrates and successfully transferred onto other substrates.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Schematic illustrations of the MQW materials design, release and transfer processes.
Figure 2: Flat single-crystal wurtzite GaN is grown on an AlN layer on the h-BN layer.
Figure 3: Structural and optical properties of an InGaN/GaN MQW structure before and after transfer.
Figure 4: Electroluminescence of transferred and conventional MQW LED at room temperature.
Figure 5: Electroluminescence of LED prototype at room temperature.

Similar content being viewed by others

References

  1. Amano, H., Kito, M., Hiramatsu, K. & Akasaki, I. p-Type conduction in Mg-doped GaN treated with low-energy electron beam irradiation (LEEBI). Jpn. J. Appl. Phys. 28, L2112–L2114 (1989)

    Article  ADS  CAS  Google Scholar 

  2. Nakamura, S. et al. InGaN-based multi-quantum-well-structure laser diodes. Jpn. J. Appl. Phys. 35, L74–L76 (1996)

    Article  CAS  Google Scholar 

  3. Asif Khan, M., Bhattarai, A., Kuznia, J. N. & Olson, D. T. High electron mobility transistor based on a GaN-AlxGa1-xN heterojunction. Appl. Phys. Lett. 63, 1214–1215 (1993)

    Article  Google Scholar 

  4. Wong, W. S., Sand, T. & Cheung, N. W. Damage-free separation of GaN thin films from sapphire substrates. Appl. Phys. Lett. 72, 599–601 (1998)

    Article  ADS  CAS  Google Scholar 

  5. Kelly, M. K. et al. Large free-standing GaN substrates by hydride vapor phase epitaxy and laser-induced liftoff. Jpn. J. Appl. Phys. 38, L217–L219 (1999)

    Article  CAS  Google Scholar 

  6. Bour, D. P. et al. Polycrystalline nitride semiconductor light-emitting diodes fabricated on quartz substrates. Appl. Phys. Lett. 76, 2182–2184 (2000)

    Article  ADS  CAS  Google Scholar 

  7. Amano, H., Sawaki, N., Akasaki, I. & Toyoda, Y. Metalorganic vapor phase epitaxial growth of a high quality GaN film using an AlN buffer layer. Appl. Phys. Lett. 48, 353–355 (1986)

    Article  ADS  CAS  Google Scholar 

  8. Nakamura, S. GaN growth using GaN buffer layer. Jpn. J. Appl. Phys. 30, L1705–L1707 (1991)

    Article  ADS  Google Scholar 

  9. Kumakura, K. & Makimoto, T. Growth of GaN on sapphire substrates using novel buffer layers of ECR-plasma-sputtered Al2O3/graded-AlON/AlN/Al2O3 . J. Cryst. Growth 292, 155–158 (2006)

    Article  ADS  CAS  Google Scholar 

  10. Ahn, J.-H. et al. Heterogeneous three-dimensional electronics by use of printed semiconductor nanomaterials. Science 314, 1754–1757 (2006)

    Article  ADS  CAS  Google Scholar 

  11. Rogers, D. J. et al. Use of ZnO thin films as sacrificial templates for metal organic vapor phase epitaxy and chemical lift-off of GaN. Appl. Phys. Lett. 91, 071120 (2007)

    Article  ADS  Google Scholar 

  12. Lee, S. W. et al. Lattice strain in bulk GaN epilayers grown on CrN/sapphire template. Appl. Phys. Lett. 94, 082105 (2009)

    Article  ADS  Google Scholar 

  13. Tripathy, S. et al. InGaN/GaN light emitting diodes on nanoscale silicon on insulator. Appl. Phys. Lett. 91, 231109 (2007)

    Article  ADS  Google Scholar 

  14. Lee, K. J. et al. Bendable GaN high electron mobility transistors on plastic substrates. J. Appl. Phys. 100, 124507 (2006)

    Article  ADS  Google Scholar 

  15. Tamboli, A. C. et al. Room-temperature continuous-wave lasing in GaN/InGaN microdisks. Nature Photon. 1, 61–64 (2007)

    Article  ADS  CAS  Google Scholar 

  16. Cho, C.-Y. et al. Growth and separation of high quality GaN epilayer from sapphire substrate by lateral epitaxial overgrowth and wet chemical etching. Appl. Phys. Express 4, 012104 (2011)

    Article  ADS  Google Scholar 

  17. Zang, K. Y. et al. A new method for lift-off of III-nitride semiconductors for heterogeneous integration. Nanoscale Res. Lett. 5, 1051–1056 (2010)

    Article  ADS  CAS  Google Scholar 

  18. Chung, K., Lee, C.-H. & Yi, G.-C. Transferable GaN layers grown on ZnO-coated graphene layers for optoelectronic devices. Science 330, 655–657 (2010)

    Article  ADS  CAS  Google Scholar 

  19. Novoselov, K. S. et al. Electric field effect in atomically thin carbon films. Science 306, 666–669 (2004)

    Article  ADS  CAS  Google Scholar 

  20. Boo, J.-H., Rohr, C. & Ho, W. MOCVD of BN and GaN thin films on silicon: new attempt of GaN growth with BN buffer layer. J. Cryst. Growth 189-190, 439–444 (1998)

    Article  ADS  Google Scholar 

  21. Kobayashi, Y. & Akasaka, T. Hexagonal BN epitaxial growth on (0001) sapphire substrate by MOVPE. J. Cryst. Growth 310, 5044–5047 (2008)

    Article  ADS  CAS  Google Scholar 

  22. Kobayashi, Y., Tsai, C.-L. & Akasaka, T. Optical band gap of h-BN epitaxial film grown on c-plane sapphire substrate. Phys. Status Solidi C 7, 1906–1908 (2010)

    Article  ADS  CAS  Google Scholar 

  23. Kobayashi, K. et al. X-ray rocking curve determination of twist and tilt angles in GaN films grown by an epitaxial-lateral-overgrowth technique. Jpn. J. Appl. Phys. 38, L611–L613 (1999)

    Article  CAS  Google Scholar 

  24. Metzger, T. et al. Defect structure of epitaxial GaN films determined by transmission electron microscopy and triple-axis X-ray diffractometry. Phil. Mag. A 77, 1013–1025 (1998)

    Article  ADS  CAS  Google Scholar 

  25. Ueda, T., Ishida, M. & Yuri, M. Laser lift-off of very thin AlGaN film from sapphire using selective decomposition of GaN interlayer. Appl. Surf. Sci. 216, 512–518 (2003)

    Article  ADS  CAS  Google Scholar 

  26. Chu, C.-F. et al. Study of GaN light-emitting diodes fabricated by laser lift-off technique. J. Appl. Phys. 95, 3916–3922 (2004)

    Article  ADS  CAS  Google Scholar 

  27. Kisielowski, C. et al. Strain-related phenomena in GaN thin films. Phys. Rev. B 54, 17745–17753 (1996)

    Article  ADS  CAS  Google Scholar 

  28. Davydov, V. Y. et al. Phonon dispersion and Raman scattering in hexagonal GaN and AlN. Phys. Rev. B 58, 12899–12907 (1998)

    Article  ADS  CAS  Google Scholar 

Download references

Acknowledgements

We thank M. Oudah for help with AFM, X-ray diffraction and Raman measurements, T. Kitada for help with TEM observations, H. Ando for help with X-ray photoelectron spectroscopy, H. Gotoh for help with photoluminescence using the InGaN-based laser, Y. Yamauchi for help with LED processing, Y. Tanaiyasu for discussions about LED characterization, and Y. Krockenberger for reading and technical support of the manuscript. We also thank H. Yamamoto and I. Yokohama for their encouragement throughout this study.

Author information

Authors and Affiliations

  1. NTT Basic Research Laboratories, Nippon Telegraph and Telephone Corporation 3-1, Morinosato Wakamiya, Atsugi, Kanagawa 243-0198, Japan,

    Yasuyuki Kobayashi, Kazuhide Kumakura, Tetsuya Akasaka & Toshiki Makimoto

Authors
  1. Yasuyuki Kobayashi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Kazuhide Kumakura
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Tetsuya Akasaka
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Toshiki Makimoto
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

Y.K. designed the experiments, grew the MQW and LED structures and characterized their structural and optical properties. K.K. fabricated the electrode, released and transferred the LED, and performed the current–voltage and electroluminescence measurements. T.A. also grew the MQW and LED structures. T.M. managed the whole experimental process. Y.K. and T.M. proposed this research and wrote the paper.

Corresponding author

Correspondence to Yasuyuki Kobayashi.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

This file contains Supplementary Text and Supplementary Figures 1-6. (PDF 1579 kb)

PowerPoint slides

Rights and permissions

Reprints and permissions

About this article

Cite this article

Kobayashi, Y., Kumakura, K., Akasaka, T. et al. Layered boron nitride as a release layer for mechanical transfer of GaN-based devices. Nature 484, 223–227 (2012). https://doi.org/10.1038/nature10970

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nature10970

This article is cited by

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing