Abstract
When a drop of liquid dries on a solid surface, its suspended particulate matter is deposited in ring-like fashion. This phenomenon, known as the coffee-ring effect1,2,3, is familiar to anyone who has observed a drop of coffee dry. During the drying process, drop edges become pinned to the substrate, and capillary flow outward from the centre of the drop brings suspended particles to the edge as evaporation proceeds. After evaporation, suspended particles are left highly concentrated along the original drop edge. The coffee-ring effect is manifested in systems with diverse constituents, ranging from large colloids1,4,5 to nanoparticles6 and individual molecules7. In fact—despite the many practical applications for uniform coatings in printing8, biology9,10 and complex assembly11—the ubiquitous nature of the effect has made it difficult to avoid6,12,13,14,15,16. Here we show experimentally that the shape of the suspended particles is important and can be used to eliminate the coffee-ring effect: ellipsoidal particles are deposited uniformly during evaporation. The anisotropic shape of the particles significantly deforms interfaces, producing strong interparticle capillary interactions17,18,19,20,21,22,23. Thus, after the ellipsoids are carried to the air–water interface by the same outward flow that causes the coffee-ring effect for spheres, strong long-ranged interparticle attractions between ellipsoids lead to the formation of loosely packed or arrested structures on the air–water interface17,18,21,24. These structures prevent the suspended particles from reaching the drop edge and ensure uniform deposition. Interestingly, under appropriate conditions, suspensions of spheres mixed with a small number of ellipsoids also produce uniform deposition. Thus, particle shape provides a convenient parameter to control the deposition of particles, without modification of particle or solvent chemistry.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Deegan, R. D. et al. Capillary flow as the cause of ring stains from dried liquid drops. Nature 389, 827–829 (1997)
Denkov, N. D. et al. Two-dimensional crystallization. Nature 361, 26 (1993)
Hu, H. & Larson, R. G. Evaporation of a sessile droplet on a substrate. J. Phys. Chem. B 106, 1334–1344 (2002)
Deegan, R. D. et al. Contact line deposits in an evaporating drop. Phys. Rev. E 62, 756–765 (2000)
Deegan, R. D. Pattern formation in drying drops. Phys. Rev. E 61, 475–485 (2000)
Bigioni, T. P. et al. Kinetically driven self assembly of highly ordered nanoparticle monolayers. Nature Mater. 5, 265–270 (2006)
Kaya, D., Belyi, V. A. & Muthukumar, M. Pattern formation in drying droplets of polyelectrolyte and salt. J. Chem. Phys. 133, 114905 (2010)
Park, J. & Moon, J. Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing. Langmuir 22, 3506–3513 (2006)
Dugas, V. Immobilization of single-stranded DNA fragments to solid surfaces and their repeatable specific hybridization: covalent binding or adsorption? Sens. Actuators B 101, 112–121 (2004)
Dugas, V., Broutin, J. & Souteyrand, E. Droplet evaporation study applied to DNA chip manufacturing. Langmuir 21, 9130–9136 (2005)
de Gans, B. J. & Duineveld, P. C. &. Schubert, U. S. Inkjet printing of polymers: state of the art and future developments. Adv. Mater. 16, 203–213 (2004)
Hu, H. & Larson, R. G. Marangoni effect reverses coffee-ring depositions. J. Phys. Chem. B 110, 7090–7094 (2006)
Weon, B. M. & Je, J. H. Capillary force repels coffee-ring effect. Phys. Rev. E 82, 015305 (2010)
Kajiya, T., Kobayashi, W., Okuzono, T. & Doi, M. Controlling the drying and film formation processes of polymer solution droplets with addition of small amount of surfactants. J. Phys. Chem. B 113, 15460–15466 (2009)
Nguyen, V. X. & Stebe, K. J. Patterning of small particles by a surfactant-enhanced Marangoni-Benard instability. Phys. Rev. Lett. 88, 164501 (2002)
Park, B. J. & Furst, E. M. Fluid-interface templating of two-dimensional colloidal crystals. Soft Matter 6, 485–488 (2010)
Loudet, J. C., Yodh, A. G. & Pouligny, B. Wetting and contact lines of micrometer-sized ellipsoids. Phys. Rev. Lett. 97, 018304 (2006)
Loudet, J. C., Alsayed, A. M., Zhang, J. & Yodh, A. G. Capillary interactions between anisotropic colloidal particles. Phys. Rev. Lett. 94, 018301 (2005)
Bowden, N., Arias, F., Deng, T. & Whitesides, G. M. Self-assembly of microscale objects at a liquid/liquid interface through lateral capillary forces. Langmuir 17, 1757–1765 (2001)
Brown, A. B. D., Smith, C. G. & Rennie, A. R. Fabricating colloidal particles with photolithography and their interactions at an air-water interface. Phys. Rev. E 62, 951–960 (2000)
Madivala, B., Fransaer, J. & Vermant, J. Self-assembly and rheology of ellipsoidal particles at interfaces. Langmuir 25, 2718–2728 (2009)
Madivala, B., Vandebril, S., Fransaer, J. & Vermant, J. Exploiting particle shape in solid stabilized emulsions. Soft Matter 5, 1717–1727 (2009)
Park, B. J. & Furst, E. M. Attractive interactions between colloids at the oil-water interface. Soft Matter http://dx.doi.org/10.1039/c1sm00005e (published online, 26 April 2011)
Fournier, J. B. & Galatola, P. Anisotropic capillary interactions and jamming of colloidal particles trapped at a liquid-fluid interface. Phys. Rev. E 65, 031601 (2002)
Champion, J. A., Katare, Y. K. & Mitragotri, S. Making polymeric micro- and nanoparticles of complex shapes. Proc. Natl Acad. Sci. USA 104, 11901–11904 (2007)
Ho, C. C., Keller, A., Odell, J. A. & Ottewill, R. H. Preparation of monodisperse ellipsoidal polystyrene particles. Colloid Polym. Sci. 271, 469–479 (1993)
Lehle, H., Noruzifar, E. & Oettel, M. Ellipsoidal particles at fluid interfaces. Eur. Phys. J. E 26, 151–160 (2008)
Lewandowski, E. P., Bernate, J. A., Tseng, A., Searson, P. C. & Stebe, K. J. Oriented assembly of anisotropic particles by capillary interactions. Soft Matter 5, 886–890 (2009)
Danov, K. D. & Kralchevsky, P. A. Capillary forces between particles at a liquid interface: general theoretical approach and interactions between capillary multipoles. Adv. Colloid Interface Sci. 154, 91–103 (2010)
Stamou, D., Duschl, C. & Johannsmann, D. Long-range attraction between colloidal spheres at the air-water interface: the consequence of an irregular meniscus. Phys. Rev. E 62, 5263–5272 (2000)
Acknowledgements
We thank K. B. Aptowicz, A. Basu, E. Buckley, J. C. Crocker, P. Habdas, T. Lubensky and K. J. Stebe for discussions and critical reading of the manuscript. We thank J. Crassous and H. Dietsch for the hydrophilic ellipsoids and spheres (see Supplementary Fig. 4). We acknowledge financial support from the National Science Foundation through DMR-0804881, the PENN MRSEC DMR-0520020 and NASA NNX08AO0G. T.S. thanks DAAD for a postdoctoral fellowship.
Author information
Authors and Affiliations
Contributions
P.J.Y. initiated the research, designed and performed the experiments, synthesized the colloidal particles, and analysed the data with support from A.G.Y., T.S. and M.A.L.; P.J.Y. and A.G.Y. wrote the manuscript, with support from T.S. and M.A.L.
Corresponding author
Ethics declarations
Competing interests
Patent applications by P.J.Y. and A.G.Y. may be affected by the paper.
Supplementary information
Supplementary Information
The file contains Supplementary Figures 1-6 with legends, Supplementary Discussion and additional references. (PDF 2283 kb)
Supplementary Movie 1
The movie shows an evaporating suspension of spheres is shown under bright field microscopy. Spheres are transported to the drop contact line, resulting in a ring-like deposit. This drop exhibits the coffee ring effect. (MOV 8050 kb)
Supplementary Movie 2
The movie shows an evaporating suspension of ellipsoids is shown under bright field microscopy. Ellipsoids adsorb to the air-water interface where they form loosely-packed structures. The final deposition is relatively uniform. This drop does not exhibit the coffee ring effect. (MOV 4363 kb)
Supplementary Movie 3
The movie shows an evaporating suspension of spheres is shown under bright field microscopy at a higher magnification. Individual spheres are seen as they are transported to the drop contact line, resulting in a ring-like deposit. This drop exhibits the coffee ring effect. (MOV 21396 kb)
Supplementary Movie 4
The movie shows a an evaporating suspension of ellipsoids is shown under bright field microscopy at a higher magnification. Individual ellipsoids are seen adsorbing to the air-water interface where they form loosely-packed structures. The final deposition is relatively uniform. This drop does not exhibit the coffee ring effect. (MOV 6279 kb)
Supplementary Movie 5
The movie shows a region near the contact line in an evaporating suspension of spheres is shown under bright field microscopy. Individual spheres are seen packing closely at the contact line, resulting in a ring-like deposit. This drop exhibits the coffee ring effect. (MOV 16162 kb)
Supplementary Movie 6
The movie shows a region near the contact line in an evaporating suspension of ellipsoids is shown under bright field microscopy at a higher magnification. Individual ellipsoids are seen adsorbing to the air-water interface where they form loosely-packed structures. These structures prevent ellipsoids from reaching the contact line. This drop does not exhibit the coffee ring effect. (MOV 9728 kb)
Supplementary Movie 7
The movie shows a region near the contact line in an evaporating suspension of ellipsoids with added surfactant is shown under bright field microscopy at a higher magnification. The added surfactant decreases the surface tension. As a result, individual ellipsoids are seen packing closely at the contact line. Unlike suspensions of ellipsoids absent surfactant, this drop exhibits the coffee ring effect. (MOV 3494 kb)
Rights and permissions
About this article
Cite this article
Yunker, P., Still, T., Lohr, M. et al. Suppression of the coffee-ring effect by shape-dependent capillary interactions. Nature 476, 308–311 (2011). https://doi.org/10.1038/nature10344
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nature10344
This article is cited by
-
Towards micro-PeLED displays
Nature Reviews Materials (2023)
-
Matrix Producing Cells Induce the Morphological Difference in the Bacillus subtilis Biofilm
Indian Journal of Microbiology (2023)
-
An Experimental Validation Study on Ferrofluid Evaporation
Chinese Journal of Mechanical Engineering (2022)
-
Coffee-ring formation through the use of the multi-ring mechanism guided by the self-assembly of magnetic nanoparticles
Scientific Reports (2022)
-
Facile fabrication of flexible metal grid transparent electrode using inkjet-printed dot array as sacrificial layer
Scientific Reports (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.