Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Helical crack-front instability in mixed-mode fracture

Abstract

Planar crack propagation under pure tension loading (mode I) is generally stable. However, it becomes universally unstable with the superposition of a shear stress parallel to the crack front (mode III). Under this mixed-mode (I + III) loading configuration, an initially flat parent crack segments into an array of daughter cracks that rotate towards a direction of maximum tensile stress1. This segmentation produces stepped fracture surfaces with characteristic ‘lance-shaped’ markings observed in a wide range of engineering2,3,4,5,6,7 and geological materials1,8. The origin of this instability remains poorly understood and a theory with which to predict the surface roughness scale is lacking. Here we perform large-scale simulations of mixed-mode I + III brittle fracture using a continuum phase-field method9,10,11 that describes the complete three-dimensional crack-front evolution. The simulations reveal that planar crack propagation is linearly unstable against helical deformations of the crack front, which evolve nonlinearly into a segmented array of finger-shaped daughter cracks. Furthermore, during their evolution, facets gradually coarsen owing to the growth competition of daughter cracks in striking analogy with the coarsening of finger patterns observed in nonequilibrium growth phenomena12,13,14. We show that the dynamically preferred unstable wavelength is governed by the balance of the destabilizing effect of far-field stresses and the stabilizing effect of cohesive forces on the process zone scale, and we derive a theoretical estimate for this scale using a new propagation law for curved cracks in three dimensions. The rotation angles of coarsened facets are also compared to theoretical predictions and available experimental data.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Crack-front segmentation and facet formation.
Figure 2: Helical instability development and growth rate.
Figure 3: Facet coarsening.
Figure 4: Facet rotation angles.

Similar content being viewed by others

References

  1. Pollard, D. D., Segall, P. & Delaney, P. T. Formation and interpretation of dilatant echelon cracks. Geol. Soc. Am. Bull. 93, 1291–1303 (1982)

    Article  ADS  Google Scholar 

  2. Smekal, A. Zum Bruchvorgang bei sprödem Stoffverhalten unter ein-und mehrachsigen Beanspruchungen. Oesterr. Ing. Arch. 7, 49–70 (1953)

    Google Scholar 

  3. Sommer, E. Formation of fracture ‘lances’ in glass. Eng. Fract. Mech. 1, 539–546 (1969)

    Article  Google Scholar 

  4. Yates, J. R. & Miller, K. J. Mixed mode (I+III) fatigue thresholds in a forging steel. Fatigue Fract. Eng. Mater. Struct. 12, 259–270 (1989)

    Article  Google Scholar 

  5. Cooke, M. L. & Pollard, D. D. Fracture propagation paths under mixed mode loading within rectangular blocks of polymethyl methacrylate. J. Geophys. Res. 101, 3387–3400 (1996)

    Article  ADS  CAS  Google Scholar 

  6. Momber, A. W. Fracture lances in glass loaded with spherical indenters. J. Mater. Sci. Lett. 22, 1477–1481 (2003)

    Article  CAS  Google Scholar 

  7. Lazarus, V., Buchholz, F.-G., Fulland, M. & Wiebesiek, J. Comparison of predictions by mode II or mode III criteria on crack front twisting in three or four point bending experiments. Int. J. Fract. 153, 141–151 (2008)

    Article  CAS  Google Scholar 

  8. DeGraff, J. M. & Aydin, A. Surface morphology of columnar joints and its significance to mechanics and direction of joint growth. Geol. Soc. Am. Bull. 99, 605–617 (1987)

    Article  ADS  Google Scholar 

  9. Karma, A., Kessler, D. A. & Levine, H. Phase-field model of mode III dynamic fracture. Phys. Rev. Lett. 87, 045501 (2001)

    Article  ADS  CAS  Google Scholar 

  10. Hakim, V. & Karma, A. Crack path prediction in anisotropic brittle materials. Phys. Rev. Lett. 95, 235501 (2005)

    Article  ADS  Google Scholar 

  11. Hakim, V. & Karma, A. Laws of crack motion and phase-field models of fracture. J. Mech. Phys. Solids 57, 342–368 (2009)

    Article  ADS  CAS  Google Scholar 

  12. Langer, J. S. Dendrites, viscous fingers, and the theory of pattern formation. Science 243, 1150–1156 (1989)

    Article  ADS  CAS  Google Scholar 

  13. Ben-Jacob, E. & Garik, P. The formation of patterns in non-equilibrium growth. Nature 343, 523–530 (1990)

    Article  ADS  Google Scholar 

  14. Trivedi, R., Liu, S. & Williams, S. Interface pattern formation in nonlinear dissipative systems. Nature Mater. 1, 157–159 (2002)

    Article  ADS  CAS  Google Scholar 

  15. Fineberg, J., Gross, S. P., Marder, M. & Swinney, H. L. Instability in dynamic fracture. Phys. Rev. Lett. 67, 457–460 (1991)

    Article  ADS  CAS  Google Scholar 

  16. Marder, M. & Gross, S. Origin of crack tip instabilities. J. Mech. Phys. Solids 43, 1–48 (1995)

    Article  ADS  MathSciNet  CAS  Google Scholar 

  17. Fineberg, J. & Marder, M. Instability in dynamic fracture. Phys. Rep. 313, 1–108 (1999)

    Article  ADS  MathSciNet  CAS  Google Scholar 

  18. Sharon, E., Cohen, G. & Fineberg, J. Propagating solitary waves along a rapidly moving crack front. Nature 410, 68–71 (2001)

    Article  ADS  CAS  Google Scholar 

  19. Buehler, M. J. & Gao, H. Dynamical fracture instabilities due to local hyperelasticity at crack tips. Nature 439, 307–310 (2006)

    Article  ADS  CAS  Google Scholar 

  20. Freund, L. B. Dynamic Fracture Mechanics (Cambridge University Press, 1998)

    MATH  Google Scholar 

  21. Gao, H. & Rice, J. R. Shear stress intensity factors for a planar crack with slightly curved front. J. Appl. Mech. 53, 774–778 (1986)

    Article  ADS  Google Scholar 

  22. Lazarus, V., Leblond, J.-B. & Mouchrif, S.-E. Crack front rotation and segmentation in mixed mode I+III or I+II+III. Part II: Comparison with experiments. J. Mech. Phys. Solids 49, 1421–1443 (2001)

    Article  ADS  Google Scholar 

  23. Karma, A. in Handbook of Materials Modeling (ed. Yip, S.) 2087–2103 (Springer, 2005)

    Book  Google Scholar 

  24. Xu, G., Bower, A. F. & Ortiz, M. An analysis of non-planar crack growth under mixed mode loading. Int. J. Solids Struct. 31, 2167–2193 (1994)

    Article  Google Scholar 

  25. Goldstein, R. V. & Salganik, R. L. Brittle fracture of solids with arbitrary cracks. Int. J. Fract. 10, 507–523 (1974)

    Article  Google Scholar 

  26. Eshelby, J. D. The elastic energy-momentum tensor. J. Elast. 5, 321–335 (1975)

    Article  MathSciNet  Google Scholar 

  27. Bouchbinder, E., Livne, A. & Fineberg, J. Weakly nonlinear theory of dynamic fracture. Phys. Rev. Lett. 101, 264302 (2008)

    Article  ADS  Google Scholar 

  28. Meakin, P. Fractals, Scaling and Growth Far from Equilibrium (Cambridge University Press, 1998)

    MATH  Google Scholar 

  29. Yuse, A. & Sano, M. Transition between crack patterns in quenched glass plates. Nature 362, 329–331 (1993)

    Article  ADS  CAS  Google Scholar 

Download references

Acknowledgements

We thank V. Hakim, J.-B. Leblond and V. Lazarus for discussions and references to the literature. This work was supported by US DOE grant number DE-FG02-07ER46400. A.J.P. also acknowledges support of grant numbers EX2005-0085 and FIS2009-13360-C03-02 and the Juan de la Cierva Program of the Spanish Ministry of Science and Innovation.

Author Contributions Both authors contributed equally to this work.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Alain Karma.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

This file contains Supplementary Information, a Supplementary Explanation to Supplementary Movies 1-3, Supplementary Data, Supplementary Figure S1 with Legend and Supplementary References. (PDF 836 kb)

Supplementary Movie 1

This movie (frontal.mov) shows the frontal view of the propagating crack-front that produced the fracture surfaces that are displayed at different times in Fig. 1(c-d) of the article. (MOV 352 kb)

Supplementary Movie 2

This movie (lateral.mov) shows lateral view of the propagating crack-front that produced the fracture surfaces that are displayed at different times in Fig. 1(c-d) of the article. (MOV 380 kb)

Supplementary Movie 3

This movie (helical.mov) is an animation of Fig. 2(a) that highlights the helical nature of the crack-front instability. (MOV 807 kb)

PowerPoint slides

Rights and permissions

Reprints and permissions

About this article

Cite this article

Pons, A., Karma, A. Helical crack-front instability in mixed-mode fracture. Nature 464, 85–89 (2010). https://doi.org/10.1038/nature08862

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nature08862

This article is cited by

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing