The shape of motile cells is determined by many dynamic processes spanning several orders of magnitude in space and time, from local polymerization of actin monomers at subsecond timescales to global, cell-scale geometry that may persist for hours. Understanding the mechanism of shape determination in cells has proved to be extremely challenging due to the numerous components involved and the complexity of their interactions. Here we harness the natural phenotypic variability in a large population of motile epithelial keratocytes from fish (Hypsophrys nicaraguensis) to reveal mechanisms of shape determination. We find that the cells inhabit a low-dimensional, highly correlated spectrum of possible functional states. We further show that a model of actin network treadmilling in an inextensible membrane bag can quantitatively recapitulate this spectrum and predict both cell shape and speed. Our model provides a simple biochemical and biophysical basis for the observed morphology and behaviour of motile cells.
Cell shape emerges from the interaction of many constituent elements—notably, the cytoskeleton, the cell membrane and cell–substrate adhesions—that have been studied in great detail at the molecular level1,2,3; however, the mechanism by which global morphology is generated and maintained at the cellular scale is not understood. Many studies have characterized the morphological effects of perturbing various cytoskeletal and other cellular components (for example, ref. 4); yet, there have been no comprehensive efforts to try to understand cell shape from first principles. Here we address this issue in the context of motile epithelial keratocytes derived from fish skin. Fish keratocytes are among the fastest moving animal cells, and their motility machinery is characterized by extremely rapid molecular dynamics and turnover5,6,7,8. At the same time, keratocytes are able to maintain nearly constant speed and direction during movement over many cell lengths. Their shapes, consisting of a bulbous cell body at the rear attached to a broad, thin lamellipodium at the front and sides, are simple, stereotyped and notoriously temporally persistent9,10. The molecular dynamism of these cells, combined with the persistence of their global shape and behaviour, make them an ideal model system for investigating the mechanisms of cell shape determination.
The relative simplicity of keratocytes has inspired extensive experimental and theoretical investigations into this cell type5,6,7,8,9,10,11,12,13,14,15,16,17, considerably advancing the understanding of cell motility. A notable example is the graded radial extension (GRE) model12, which was an early attempt to link the mechanism of motility at the molecular level with overall cell geometry. The GRE model proposed that local cell extension (either protrusion or retraction) occurs perpendicular to the cell edge, and that the magnitude of this extension is graded from a maximum near the cell midline to a minimum towards the sides. Although this phenomenological model has been shown experimentally to describe keratocyte motion, it does not consider what generates the graded extension rates, neither does it explain what determines the cellular geometry in the first place. Thus, even for these simple cells, it has remained unclear how the biochemical and biophysical molecular dynamics underlying motility give rise to large-scale cell geometry. In this work we address this question by exploiting the natural phenotypic variability in keratocytes to measure the relations among cell geometry, actin distribution and motility. On the basis of quantitative observations of a large number of cells, we have developed a model that relates overall cell geometry to the dynamics of actin network treadmilling and the forces imposed on this network by the cell membrane. This model is able to quantitatively explain the main features of keratocyte shapes and to predict the relationship between cell geometry and speed.
Low-dimensional keratocyte shape space
Individual keratocytes assume a variety of cell shapes (Fig. 1a). A quantitative characterization18,19 of a large population of live keratocytes revealed that keratocyte shapes are well described with just four orthogonal modes of shape variability (Fig. 1b), which together account for ∼97% of the total variation in shape. Roughly, these modes can be characterized as measures of: the projected cell area (mode 1); whether the cell has a rounded ‘D’ shape or an elongated ‘canoe’ shape (mode 2)11; the angle of the rear of the lamellipodium with respect to the cell body (mode 3); and the left–right asymmetry of the side lobes (mode 4). These shape modes provide a meaningful and concise quantitative description of keratocyte morphology using very few parameters. Specifically, over 93% of the cell-to-cell shape variation can be captured by recording only two parameters per cell: the cell’s position along shape modes 1 and 2, or, essentially equivalently, its projected area and aspect ratio. Two additional parameters are required to describe the detailed shape of the rear of the cell (shape modes 3 and 4). The existence of only a few meaningful modes implies that the phase space in which keratocytes reside is a relatively small subregion of the space of all possible shapes.
To investigate further the role of various molecular processes in determining cell shape, we targeted specific components of the cytoskeleton in live cells with pharmacological agents that affect actin dynamics or myosin activity. The different treatments elicited statistically significant morphological changes (Supplementary Fig. 1), but their extent was rather small. In particular, the natural shape variation in the population (Fig. 1) was substantially larger than the shifts induced by any of the perturbations (Supplementary Fig. 1). Furthermore, whereas the shape of an individual cell can be significantly affected by such perturbations11, the phase space of cell shapes under the perturbations tested was nearly identical to that spanned by the population of unperturbed cells (Supplementary Fig. 1). This led us to focus on the phenotypic variability in unperturbed populations, which, as described, provided significant insight into the underlying mechanisms of shape determination.
Cell shape is dynamically determined
The natural phenotypic variability described presents a spectrum of possible functional states of the system. To better characterize these states, we measured cell speed, area, aspect ratio and other morphological features in a large number of live cells (Fig. 2a) and correlated these traits across the population (Fig. 2b; see also the Supplementary Information). To relate these measures to cellular actin dynamics, we concurrently examined the distribution of actin filaments along the leading edge. To visualize actin filaments in live cells, we used low levels of tetramethylrhodamine (TMR)-derivatized kabiramide C, which at low concentrations binds as a complex with G-actin to free barbed ends of actin filaments20,21, so that along the leading edge the measured fluorescence intensity is proportional to the local density of filaments.
The phenotypic variability in our test population is depicted in the histograms shown in Fig. 2a. We further characterized this variability by following several individual cells over time. Particularly notable was the observation that the projected cell area, although quite variable across the population, was essentially constant for a given cell (Fig. 2a). This suggests that the area, probably determined by the total amount of available plasma membrane or by tight regulation of the membrane surface area, is intrinsic to each cell and constant through time. Individual cells showed larger variability in other measures such as speed and aspect ratio; nevertheless, in every case, individual variability remained smaller than that of the population as a whole (Fig. 2a). The measured properties correlate well across the data set (Fig. 2b and Supplementary Fig. 2), producing a phenotypic continuum that we have described previously11: from rough, slow and rounded ‘decoherent’ cells, to smooth, fast and wide ‘coherent’ cells that exhibit a more pronounced peak in actin filament density at the centre.
To examine the role that the particular history of a given cell has in determining cell morphology, we confronted keratocytes with an acute perturbation—transient treatment with high concentrations of dimethylsulphoxide (DMSO)—which resulted in temporary lamellipodial loss and cell rounding22. We found that cells were able to resume movement (albeit in an arbitrary direction with respect to their orientation before DMSO treatment) and return to their original morphology and speed within minutes (Fig. 2c–e), comparable to the characteristic timescales of the underlying molecular processes such as actin assembly and disassembly and adhesion formation5,6,7,8,23. This rapid recovery of pre-perturbation properties suggests that the observed, persistent behaviour of keratocytes is a manifestation of a dynamic system at steady state. Taken together, our results imply that cell shape and speed are determined by a history-independent self-organizing mechanism, characterized by a small number of cellular parameters that stay essentially constant over time (such as available quantities of membrane or cytoskeletal components), independent of the precise initial localization of the components of the motility machinery.
Actin/membrane model explains cell shape
We set out to develop a quantitative physical model of cell shape and movement that could explain this observed spectrum of keratocyte behaviour. Specifically, we sought to describe mechanistically the shape variability captured in the first two principal modes of keratocyte shape (Fig. 1b; comprising over 93% of the total shape variation), setting aside the detailed shape of the cell rear. Two observations—first, that cell area is constant (Fig. 2a), and second, that the density of filamentous actin along the leading edge is graded (Fig. 3a,b)—are central to our proposed mechanism of cell shape regulation. In addition, this mechanism is predicated on the basis of previous observations that the lamellipodial actin network undergoes treadmilling, with net assembly at the leading edge and net disassembly towards the rear8,24,25.
We hypothesize that actin polymerization pushes the cell membrane from within, generating membrane tension26. The cell membrane, which has been observed to remain nearly stationary in the cell frame of reference in keratocytes12,14, is fluid and bends easily but is nevertheless inextensible (that is, it can be deformed but not stretched)27. Forces on the membrane at any point equilibrate within milliseconds26 (see Supplementary Information) so that, on the timescales relevant for motility, membrane tension is spatially homogenous at all points along the cell boundary. At the leading edge, membrane tension imposes an opposing force on growing actin filaments that is constant per unit edge length, so that the force per filament is inversely proportional to the local filament density. At the centre of the leading edge, where filament density is high (Fig. 3a–c), the membrane resistance per filament is small, allowing filaments to grow rapidly and generate protrusion. As filament density gradually decreases towards the cell sides, the forces per filament caused by membrane tension increase until polymerization is stalled at the far sides of the cell, which therefore neither protrude nor retract. At the rear of the cell, where the actin network disassembles, membrane tension, assisted by myosin contraction, crushes the weakened network and moves actin debris forward, thereby retracting the cell rear (Fig. 3d, inset). Membrane tension, which is spatially constant, thus induces a direct coupling between molecular processes occurring at distant regions of the cell and contributes to the global coordination of those processes. The Supplementary Information discusses alternative hypotheses regarding cell shape determination that are inconsistent with our measurements (Supplementary Fig. 3).
This qualitative model can be mathematically specified and quantitatively compared to our data set as follows (see Supplementary Table 1 for a list of model assumptions, and Supplementary Information for further details). As discussed previously (Fig. 1), keratocyte shapes can largely be described by two parameters: shape modes 1 and 2, which essentially correspond to cell area (A) and aspect ratio (S), respectively. Thus, for simplicity, we begin by approximating cells as rectangles with width x and length y (A = xy, S = x/y, and the total leading edge length (front and sides) is ). The observed steady-state centre-peaked distribution of actin filaments along the leading edge (D) can be described as a parabola: , where l is the arc distance along the leading edge (l = 0 at the cell midline), β is the total number of nascent actin filaments that branch off from existing growing filaments per cell per second, and γ is the rate of capping of existing filaments (Fig. 3c; see Supplementary Information for derivation). We make the further assumption (described previously) that actin filament protrusion is mechanically stalled by the membrane tension T at the sides of the front of the lamellipodium (). The force acting on each filament at the sides must therefore be approximately equal to the force required to stall a single actin filament28, fstall, which has been measured29,30, so that: . We find that the peak actin density Dc = D(0) fluctuates more than Ds across the population and in individual cells through time (Supplementary Fig. 4; Supplementary Information), suggesting that most of the shape variation observed correlates with differences in actin dynamics rather than changes in membrane tension.
This simple model provides a direct link between the distribution of filamentous actin and overall cell morphology. From the previous equations, this link can be expressed as a relation between the ratio of actin filament density at the centre () versus the sides () of the leading edge, denoted Dcs, and the aspect ratio of the cell, S: . Thus, cells with relatively more actin filament density at the centre than the sides (high Dcs) have higher aspect ratios, whereas cells with low Dcs ratios have aspect ratios closer to one. As shown in Fig. 3d, the correlation between Dcs and S in our measurements closely follows this model prediction, which, importantly, involves no free parameters. The model is further supported by perturbation experiments, in which, for example, increasing the capping rate γ (by treatment with cytochalasin D) led to the predicted decrease in cell aspect ratio (Supplementary Fig. 1; Supplementary Information). Remarkably, all the model parameters apart from area can be combined into a single parameter: , which signifies the ratio of the membrane tension to the force needed to stall actin network growth at the centre of the leading edge. This key parameter can be expressed in multiple ways: ; that is, in terms of the membrane tension, filament stall force, and branching and capping rates; in terms of the measurable geometry of the cell alone; or in terms of the actin density ratio and cell geometry (see also Supplementary Fig. 5). Thus, this model describes the basic relation between actin network dynamics at the molecular level and overall actin network structure and shape at the cellular scale using only two biologically relevant parameters: z and A.
Shape, speed and lamellipodial radius
To describe cell shape with more accuracy and to relate cell speed to morphology, we must consider the relationship between the growth rate of actin filaments and the magnitude of force resisting their growth. This so-called force–velocity relationship can be used to determine the protrusion rate at the leading edge, and thus cell speed, from the forces exerted by the membrane against the growing lamellipodial actin network. Because membrane tension is the same everywhere along the leading edge, although the filamentous actin density is peaked at the centre of the leading edge, the resistive force per filament increases with distance from the centre. As a result, local protrusion rates decrease smoothly from the centre towards the sides of the leading edge (where, as above, protrusion is stalled). Assuming that protrusion is locally perpendicular to the cell boundary, this implies that the sides of the leading edge lag behind the centre, causing the leading edge to become curved as observed (Fig. 1a; such a relation between geometry and spatially variable protrusion rates was first described in the GRE model12). Thus, keratocytes can be more accurately described as slightly bent rectangles, characterized by the radius of curvature of their leading edge, R, and their overall rate of movement (Fig. 4), in addition to their width and length.
Given a particular force–velocity relation, both cell speed and lamellipodial radius can be expressed, in the context of this model, solely in terms of the parameters A and z. Thus, speed and radius are predicted to vary with cell area and aspect ratio, providing further tests of the model. The exact form of the force–velocity relation for the lamellipodial actin network is unknown. Measurements in branched actin networks, both in motile keratocytes16 and assembled in cytoplasmic extracts31, yielded force–velocity relations that were concave down: that is, the protrusion rate was insensitive to force at weak loads (relative to the stall force), whereas at greater loads the speed decreased markedly. Regardless of its precise functional dependence, as long as the force–velocity relation entails such a monotonic concave-down decrease in protrusion velocity with increasing membrane tension, the predicted trends in cell speed and lamellipodium radius correlate well with our experimental observations (Supplementary Fig. 6). We find good quantitative agreement between the model and our observations using a force–velocity relation given by , where w = 8 (Fig. 4).
By combining this force–velocity relation with the geometric formulae of the GRE model, we obtain (see Supplementary Information), which predicts the radius of curvature of a cell’s leading edge from its area and aspect ratio alone. Figure 4a demonstrates the close agreement between the measured and the calculated radii of curvature. At the centre of the leading edge, f = T/Dc; therefore, . Thus, a cell’s speed can be predicted from its aspect ratio, with more canoe-like cells expected to move faster. We find that the trend of the experimental data agrees with our predictions (Fig. 4b), and, in particular, shows the predicted saturation of speed with increasing aspect ratio. We expect cell-to-cell variation in some of the model parameters that determine cell speed such as the concentration of actin monomers and the fraction of pushing actin filaments, as well as in the rate of retrograde actin flow with respect to the substrate13,17. Without detailed per-cell measurements of these, we use constant values that reflect the population mean, allowing correct prediction of population trends, whereas some aspects of cell-to-cell variation remain unexplained.
We have used correlative approaches to map quantitatively the functional states of keratocyte motility from a large number of observations of morphology, speed and actin network structure in a population of cells. This data set provided the basis for and constraints on a quantitative model of cell shape that requires only two cell-dependent parameters; these parameters are measurable from cell geometry alone and are closely related to the two dimensions of a phase space that accounts for over 93% of all keratocyte shape variation. Although conceptually quite straightforward, our model describes connections between dynamic events spanning several orders of magnitude in space and time and is, to our knowledge, the first quantitative approach relating molecular mechanisms to cell geometry and movement. The model is able to explain specific properties of keratocyte shape and locomotion on the basis of a coupling of tension in the cell membrane to the dynamics of the treadmilling network of actin filaments. Overall, the picture is very simple: actin network treadmilling (characterized by the z parameter) drives from within the forward protrusion of an inextensible membrane bag (characterized in two dimensions by its total area). Such a scenario was suggested over a decade ago32, but prior to this work had never been tested. Furthermore, this basic mechanism seems to be sufficient to explain the persistent and coordinated movement of keratocytes without incorporating regulatory elements such as microtubules, morphogens or signalling molecules33, suggesting that, at least in keratocytes, these elements are dispensable or redundant.
The model highlights the important regulatory role of membrane tension in cell shape determination: actin assembly at the leading edge and disassembly at the cell rear are both modulated by forces imposed on the actin network by the membrane. Moreover, because membrane tension is constant along the cell boundary, it effectively couples processes (such as protrusion and retraction) that take place in spatially distinct regions of the cell. On the basis of our results, we estimate the membrane tension in motile keratocytes to be on the order of 100 pN µm-1 (see Supplementary Information), similar to the results of experiments that estimated membrane tension from the force on a tether pulled from the surface of motile fibroblasts34.
Our model does not specifically address adhesion or the detailed shape of the cell rear (captured in shape modes 3 and 4; Fig. 1b). Nevertheless, adhesive contacts to the substrate are obviously essential for the cell to be able to generate traction and to move forward. We assume implicitly that the lamellipodial actin network is attached to the substrate, which allows polymerization to translate into cellular protrusion. This assumption is consistent with experimental evidence indicating that the actin network in the keratocyte lamellipodium is nearly stationary with respect to the substrate8,13,17. The rear boundary of the cell is also implicit in our model, and is set by the position of the ‘rear corners’ of the lamellipodium: the locations at which the density of actin filaments actively pushing against the cell membrane falls to zero. Thus, we do not address the possible contribution of myosin contraction in retracting the cell rear and disassembling the actin network7,26 (see Supplementary Information).
Our results emphasize that careful quantitative analysis of natural cell-to-cell variation can provide powerful insight into the molecular mechanisms underlying complex cell behaviour. A rapidly moving keratocyte completely rebuilds its cytoskeleton and adhesive structures every few minutes, generating a cell shape that is both dynamically determined and highly robust. This dynamic stability suggests that shape emerges from the numerous molecular interactions as a steady-state solution, without any simple central organizing or bookkeeping mechanism. In this work, we relied on several decades of detailed mechanistic studies on the molecular mechanisms involved to derive a physically realistic model for large-scale shape determination. This model is directly and quantitatively coupled to the molecular-scale dynamics and has surprising predictive power. As individual functional modules within cells are unveiled at the molecular level, understanding their large-scale integration is becoming an important challenge in cell biology. To this end, we propose that the biologically rich cell-to-cell variability present within all normal populations represents a fruitful but currently underused resource of mechanistic information regarding complex processes such as cell motility.
Keratocytes were isolated from the scales of the Central American cichlid H. nicaraguensis and were cultured as described previously11. TMR-derivatized kabiramide C was added to cells in culture medium for 5 min and subsequently washed20. DMSO treatment consisted of either application of 2–5 µl DMSO directly onto cells or addition of 10% DMSO to the culture medium.
Cells were imaged in a live-cell chamber at room temperature (∼23 °C) on a Nikon Diaphot300 microscope using a ×60 lens (numerical aperture, 1.4). To obtain velocity information, for each coverslip, 15–30 randomly chosen cells were imaged twice, 30 s apart. Time-lapse movies of individual cells were acquired at 10-s intervals.
Cell morphology was measured from manually defined cell shapes, as described previously11,19. ‘Shape modes’ were produced by performing principal components analysis on the population of cell shapes after mutual alignment.
Keratocyte sheets from one-day-old cultures were disaggregated by incubating in 85% PBS and 2.5 mM EGTA, pH 7.4, for 5 min, followed by incubation in normal media for an additional ∼1–2 h. TMR-derivatized kabiramide C was added to cells in culture medium for 5 min and subsequently washed20. Pharmacological agents including, cytochalasin D (Sigma), latrunculin, jasplakinolide (both from Molecular Probes), blebbistatin (active enantiomer, Toronto Research Chemicals) or calyculin A (Upstate), were applied to cells in culture medium, and the cells were imaged 10–30 min afterwards.
Images were collected on a cooled back-thinned CCD camera (Princeton Instruments), with a ×2 optovar attached (1 pixel = 0.11 μm). The population data was acquired by imaging 15–30 randomly chosen cells per coverslip.
Cell morphology was measured from cell shapes represented as polygonal outlines and mutually aligned, as described previously11,19. In brief, cell shapes were manually masked using the magnetic-lasso tool in Adobe Photoshop on the phase-contrast image and stored as binary images. Polygonal outlines were extracted from these masks and represented as two-dimensional parametric periodic uniform cubic B-splines, which were sampled at 200 evenly spaced points to generate the final polygons. These were then aligned across the population to ensure that all polygons were oriented similarly; to facilitate this, the centroid of the cell body—a landmark by which the front and rear of the cell can be automatically determined—was extracted from the fluorescent kabiramide C image or by manual marking. Simultaneously, the point ordering of each polygon was adjusted so that corresponding points were in similar spatial locations on the cell across the population. (See algorithms 1 and 2 in Supplementary Information for details.) Cell alignment was then manually verified. The ‘shape modes’ were produced by applying the principal components analysis to the population of cell shapes, represented as 400-dimensional vectors of packed (x, y) points, and scaled in terms of the standard deviation of the population of shapes along that principle component.
Measured cellular characteristics included: cell area; aspect ratio; lamellipodial radius; speed; front roughness; and actin ratio. Area was measured directly from the polygons with the standard formula. Aspect ratio was measured as the ratio of the width to the length of the cell’s bounding box after cells were mutually aligned as above. The roughness of the leading edge of each cell was measured by calculating the average absolute value of the local curvature at each point along the leading edge, corrected for effects due to cell size11. The overall curvature of the leading edge was calculated as the radius of the least-squares ‘geometric fit’ of a circle to the points corresponding to the leading edge (the forward 40% of the cell)35. The distribution of kabiramide C staining along the leading edge was calculated by averaging the intensity of background-corrected fluorescence images between the cell edge (as determined by the polygon) and 1 µm inward from there. The centre intensity was defined as the average of this profile in a 5-µm-wide window centred on the cell midline; side intensity was defined as the average in similar windows at the left and right sides of the cell. Cell speed for the live population data was extracted from the displacement of the cell centroid as determined from the manually drawn masks of the two images taken 30 s apart for each cell. Angular cell speed was extracted from the relative rotation angle required for alignment of the two cell shapes. For time-lapse movies of individual cells and DMSO-treated cells taken with a 10-s time interval, the centroid based measurements were noisy so we relied on a correlation-based technique36. The translation and rotation of a cell between a pair of consecutive time-lapse images were extracted as in ref. 36, with the modification that the masks used were based on the manually drawn cell masks and the centre of rotation was taken as the centroid of the mask in the first image. All measurements of individual cells (unstained, stained with kabiramide C, and perturbed, as well as a fixed-cell population) and on cells followed with time-lapse microscopy (stained with kabiramide C and perturbed with DMSO) are provided as Supplementary Tables.
To assess the significance of the reported correlations between measurements in a manner reasonably robust to outliers, we used the bootstrap method to approximate the sampling distribution of each correlation coefficient r. The data set was resampled with replacement 104 times, and for each resampling the pairwise correlations were recomputed. Positive (or negative) correlations were deemed significant if r = 0 fell below the 5th (or above the 95th) percentile of the estimated distribution of r. Differences in the mean values of each measure between the perturbed and unperturbed populations were assessed for significance with the same procedure.
Carlier, M. F. & Pantaloni, D. Control of actin assembly dynamics in cell motility. J. Biol. Chem. 282, 23005–23009 (2007)
Pollard, T. D., Blanchoin, L. & Mullins, R. D. Molecular mechanisms controlling actin filament dynamics in nonmuscle cells. Annu. Rev. Biophys. Biomol. Struct. 29, 545–576 (2000)
Zaidel-Bar, R., Cohen, M., Addadi, L. & Geiger, B. Hierarchical assembly of cell-matrix adhesion complexes. Biochem. Soc. Trans. 32, 416–420 (2004)
Bakal, C., Aach, J., Church, G. & Perrimon, N. Quantitative morphological signatures define local signaling networks regulating cell morphology. Science 316, 1753–1756 (2007)
Anderson, K. I. & Cross, R. Contact dynamics during keratocyte motility. Curr. Biol. 10, 253–260 (2000)
Lee, J. & Jacobson, K. The composition and dynamics of cell–substratum adhesions in locomoting fish keratocytes. J. Cell Sci. 110, 2833–2844 (1997)
Svitkina, T. M., Verkhovsky, A. B., McQuade, K. M. & Borisy, G. G. Analysis of the actin–myosin II system in fish epidermal keratocytes: mechanism of cell body translocation. J. Cell Biol. 139, 397–415 (1997)
Theriot, J. A. & Mitchison, T. J. Actin microfilament dynamics in locomoting cells. Nature 352, 126–131 (1991)
Euteneuer, U. & Schliwa, M. Persistent, directional motility of cells and cytoplasmic fragments in the absence of microtubules. Nature 310, 58–61 (1984)
Goodrich, H. B. Cell behavior in tissue cultures. Biol. Bull. 46, 252–262 (1924)
Lacayo, C. I. et al. Emergence of large-scale cell morphology and movement from local actin filament growth dynamics. PLoS Biol. 5, e233 (2007)
Lee, J., Ishihara, A., Theriot, J. A. & Jacobson, K. Principles of locomotion for simple-shaped cells. Nature 362, 167–171 (1993)
Jurado, C., Haserick, J. R. & Lee, J. Slipping or gripping? Fluorescent speckle microscopy in fish keratocytes reveals two different mechanisms for generating a retrograde flow of actin. Mol. Biol. Cell 16, 507–518 (2005)
Kucik, D. F., Elson, E. L. & Sheetz, M. P. Cell migration does not produce membrane flow. J. Cell Biol. 111, 1617–1622 (1990)
Grimm, H. P., Verkhovsky, A. B., Mogilner, A. & Meister, J. J. Analysis of actin dynamics at the leading edge of crawling cells: implications for the shape of keratocyte lamellipodia. Eur. Biophys. J. 32, 563–577 (2003)
Prass, M., Jacobson, K., Mogilner, A. & Radmacher, M. Direct measurement of the lamellipodial protrusive force in a migrating cell. J. Cell Biol. 174, 767–772 (2006)
Vallotton, P. et al. Tracking retrograde flow in keratocytes: news from the front. Mol. Biol. Cell 16, 1223–1231 (2005)
Cootes, T. F., Taylor, C. J., Cooper, D. H. & Graham, J. Active shape models — their training and application. Comput. Vis. Image Underst. 61, 38–59 (1995)
Pincus, Z. & Theriot, J. A. Comparison of quantitative methods for cell-shape analysis. J. Microsc. 227, 140–156 (2007)
Petchprayoon, C. et al. Fluorescent kabiramides: new probes to quantify actin in vitro and in vivo . Bioconjug. Chem. 16, 1382–1389 (2005)
Tanaka, J. et al. Biomolecular mimicry in the actin cytoskeleton: mechanisms underlying the cytotoxicity of kabiramide C and related macrolides. Proc. Natl Acad. Sci. USA 100, 13851–13856 (2003)
Sanger, J. W., Gwinn, J. & Sanger, J. M. Dissolution of cytoplasmic actin bundles and the induction of nuclear actin bundles by dimethyl sulfoxide. J. Exp. Zool. 213, 227–230 (1980)
Watanabe, N. & Mitchison, T. J. Single-molecule speckle analysis of actin filament turnover in lamellipodia. Science 295, 1083–1086 (2002)
Pollard, T. D. & Borisy, G. G. Cellular motility driven by assembly and disassembly of actin filaments. Cell 112, 453–465 (2003)
Wang, Y. L. Exchange of actin subunits at the leading edge of living fibroblasts: possible role of treadmilling. J. Cell Biol. 101, 597–602 (1985)
Kozlov, M. M. & Mogilner, A. Model of polarization and bistability of cell fragments. Biophys. J. 93, 3811–3819 (2007)
Sheetz, M. P., Sable, J. E. & Dobereiner, H. G. Continuous membrane–cytoskeleton adhesion requires continuous accommodation to lipid and cytoskeleton dynamics. Annu. Rev. Biophys. Biomol. Struct. 35, 417–434 (2006)
Schaus, T. E. & Borisy, G. Performance of a population of independent filaments in lamellipodial protrusion. Biophys. J. (in the press)
Footer, M. J., Kerssemakers, J. W., Theriot, J. A. & Dogterom, M. Direct measurement of force generation by actin filament polymerization using an optical trap. Proc. Natl Acad. Sci. USA 104, 2181–2186 (2007)
Kovar, D. R. & Pollard, T. D. Insertional assembly of actin filament barbed ends in association with formins produces piconewton forces. Proc. Natl Acad. Sci. USA 101, 14725–14730 (2004)
Parekh, S. H., Chaudhuri, O., Theriot, J. A. & Fletcher, D. A. Loading history determines the velocity of actin-network growth. Nature Cell Biol. 7, 1219–1223 (2005)
Mitchison, T. J. & Cramer, L. P. Actin-based cell motility and cell locomotion. Cell 84, 371–379 (1996)
Ridley, A. J. et al. Cell migration: integrating signals from front to back. Science 302, 1704–1709 (2003)
Raucher, D. & Sheetz, M. P. Cell spreading and lamellipodial extension rate is regulated by membrane tension. J. Cell Biol. 148, 127–136 (2000)
Gander, W., Golub, G. H. & Strebel, R. Least-squares fitting of circles and ellipses. BIT 34, 558–578 (1994)
Wilson, C. A. & Theriot, J. A. A correlation-based approach to calculate rotation and translation of moving cells. IEEE Trans. Image Process. 15, 1939–1951 (2006)
We thank C. Lacayo, C. Wilson and M. Kozlov for discussion, and P. Yam, C. Lacayo, E. Braun and T. Pollard for comments on the manuscript. K.K. is a Damon Runyon Postdoctoral Fellow supported by the Damon Runyon Cancer Research Foundation, and a Horev Fellow supported by the Taub Foundations. A.M. is supported by the National Science Foundation grant number DMS-0315782 and the National Institutes of Health Cell Migration Consortium grant number NIGMS U54 GM64346. J.A.T. is supported by grants from the National Institutes of Health and the American Heart Association.
Author Contributions Z.P., K.K., E.L.B., G.M.A. and J.A.T. designed the experiments. K.K., G.M.A., E.L.B. and Z.P. performed the experiments. Z.P. together with K.K., A.M., G.M.A. and E.L.B. analysed the data. A.M. together with K.K., Z.P., E.L.B., G.M.A. and J.A.T. developed the model. G.M. provided the kabiramide C probe. Z.P., K.K., A.M. and J.A.T. wrote the paper. All authors discussed the results and commented on the manuscript.
This file contains Supplementary Discussion, Supplementary Methods and Supplementary Figures S1-S8 with Legends. The file includes: a table of model assumptions and their rationales; mathematical derivations of the model and equations presented in the main text; further discussion of the relation of the model to experimental data and other model predictions; discussion of the limitations of the model; analysis of the results of the molecular perturbations; a rationale for ruling out alternate models; and supplementary methods including shape-alignment algorithms. (PDF 4973 kb)
The file contains Supplementary Data with multiple files containing the measurements presented in the main and supplementary text, including: live cell populations (stained with kabiramide C and unstained) imaged at 30 seconds apart; several live cells followed through time; a fixed-cell population; populations of live cells perturbed with various pharmacological agents; and time-lapse measurements of cells challenged with DMSO. (zip-compressed comma-separated value files.(zip-compressed comma-separated value files. (ZIP 169 kb)
The file contains Supplementary Movie 1. This movie shows a motile keratocyte before, during and after transient treatment with DMSO. The time lapse covers a period of about 28 min (the DMSO perturbation is applied about 6 min into the movie), and the field of view is 87 ?m wide. The movie clearly illustrates how the cell recovers from an acute perturbation and resumes its original shape and speed. (MOV 242 kb)
The file contains Supplementary Movie 2. This movie shows phase-contrast (left) and fluorescence (right) images of a kabiramide C stained "coherent" keratocyte. The time lapse covers a period of about 6 min, and the field of view is 56 ?m wide. (MOV 1935 kb)
The file contains Supplementary Movie 3. This movie shows phase-contrast (left) and fluorescence (right) images of a kabiramide C stained "decoherent" keratocyte. The time lapse covers a period of about 11 min, and the field of view is 56 ?m wide. (MOV 2977 kb)
About this article
Cite this article
Keren, K., Pincus, Z., Allen, G. et al. Mechanism of shape determination in motile cells. Nature 453, 475–480 (2008). https://doi.org/10.1038/nature06952
Journal of Cell Science (2021)
The intracellular calcium dynamics in a single vascular endothelial cell being squeezed through a narrow microfluidic channel
Biomechanics and Modeling in Mechanobiology (2021)
Quantifying the roles of space and stochasticity in computer simulations for cell biology and cellular biochemistry
Molecular Biology of the Cell (2021)
Archives of Computational Methods in Engineering (2021)
Biology Open (2021)