Article | Published:

Great Himalayan earthquakes and the Tibetan plateau

Naturevolume 444pages165170 (2006) | Download Citation

Subjects

Abstract

It has been assumed that Himalayan earthquakes are driven by the release of compressional strain accumulating close to the Greater Himalaya. However, elastic models of the Indo–Asian collision using recently imaged subsurface interface geometries suggest that a substantial fraction of the southernmost 500 kilometres of the Tibetan plateau participates in driving great ruptures. We show here that this Tibetan reservoir of elastic strain energy is drained in proportion to Himalayan rupture length, and that the consequent growth of slip and magnitude with rupture area, when compared to data from recent earthquakes, can be used to infer a 500-year renewal time for these events. The elastic models also illuminate two puzzling features of plate boundary seismicity: how great earthquakes can re-rupture regions that have already ruptured in recent smaller earthquakes and how mega-earthquakes with greater than 20 metres slip may occur at millennia-long intervals, driven by residual strain following many centuries of smaller earthquakes.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

References

  1. 1

    DeMets, C., Gordon, R. G., Argus, D. F. & Stein, S. Effect of recent revisions to the geomagnetic reversal time scale on estimates of current plate motions. Geophys. Res. Lett. 21, 2191–2194 (1994)

  2. 2

    Zhang, P. et al. Continuous deformation of the Tibetan Plateau from global positioning system data. Geology 32, 809–812 (2004)

  3. 3

    Bilham, R., Larson, K. & Freymueller, J. Project Idylhim members. GPS measurements of present-day convergence across the Nepal Himalaya. Nature 386, 61–64 (1997)

  4. 4

    Bettinelli, P. et al. Plate motion of India and interseismic strain in the Nepal Himlayan from GPS and DORIS measurements. J. Geod. doi:10.1007/s00190-006-0030-3 (published online 8 March, 2006)

  5. 5

    Houseman, G. & England, P. Crustal thickening versus lateral expulsion in the India-Asia continental collision. J. Geophys. Res. 98, 12233–12249 (1993)

  6. 6

    Schulte-Pelkum, V. et al. Imaging the Indian Subcontinent beneath the Himalaya. Nature 435, 1222–1225 (2005)

  7. 7

    Crouch, S. L. & Starfield, A. M. Boundary Element Methods in Solid Mechanics (Allen Unwin, London, 1983)

  8. 8

    Gomberg, J. & Ellis, M. Topography and tectonics of the central New Madrid seismic zone: Results of numerical experiments using a three-dimensional boundary-element program. J. Geophys. Res. 99, 20299–20310 (1994)

  9. 9

    Okada, Y. Internal deformation due to shear and tensile faults in a half-space. Bull. Seismol. Soc. Am. 82, 1018–1040 (1992)

  10. 10

    Lyon-Caen, H. & Molnar, P. Gravity anomalies, flexure of the Indian plate, and the structure, support and evolution of the Himalaya and Ganga Basin. Tectonics 4, 513–538 (1985)

  11. 11

    Wesnousky, S. G., Kumar, S., Mohindra, R. & Thakur, V. C. Uplift and convergence along the Himalayan Frontal Thrust of India. Tectonics 18, 967–976 (1999)

  12. 12

    Lave, J. & Avouac, J. P. Active folding of fluvial terraces across the Siwaliks Hills, Himalayas of central Nepal. J. Geophys. Res. 105, 5735–5770 (2000)

  13. 13

    Cattin, R. & Avouac, J. P. Modelling mountain building, the seismic cycle in the Himalaya of Nepal. J. Geophys. Res. 105, 13389–13407 (2000)

  14. 14

    Molnar, P. & Lyon-Caen, H. Fault plane solutions of earthquakes and active tectonics of the Tibetan Plateau and its margins. Geophys. J. Int. 99, 123–153 (1989)

  15. 15

    Chen, W-P. & Molnar, P. Seismic moments of major earthquakes and the average rate of slip in Central Asia. J. Geophys. Res. 82, 2945–2969 (1977)

  16. 16

    Molnar, P. A review of geophysical constraints on the deep structure of the Tibetan Plateau, the Himalaya, and the Karakorum and their tectonic implications. Phil. Trans. R. Soc. Lond. A 326, 33–88 (1988)

  17. 17

    Jackson, M. & Bilham, R. Constraints on Himalayan deformation inferred from vertical velocity fields in Nepal and Tibet. J. Geophys. Res. 99, 13897–13912 (1994)

  18. 18

    Chen, J. Y. & Zhang, J. On the crustal movement in Quomolongma Feng and its adjacent area. Acta Geophys. Sinica 39, 67–78 (1996)

  19. 19

    Xu, C., Jungnan Liu, W. J. & Chuang, S. GPS measurements of present day uplift in Southern Tibet. Earth Planets Space 52, 735–739 (2000)

  20. 20

    Perfettini, H. & Avouac, J. P. Stress transfer and strain rate variations during the seismic cycle. J. Geophys. Res. 109 doi: 10.1029/2003JB002917 (2004)

  21. 21

    Ambraseys, N. & Jackson, D. A note on early earthquakes in northern India and southern Tibet. Curr. Sci. 84, 570–582 (2003)

  22. 22

    Wells, D. L. & Coppersmith, K. L. New empirical relationships among magnitude, rupture width, rupture area, and surface displacement. Bull. Seismol. Soc. Am. 84, 974–1002 (1994)

  23. 23

    Shaw, B. E. & Scholz, C. H. Slip-length scaling in large earthquakes: Observations and theory and implications for earthquake physics. Geophys. Res. Lett. 28, 2995–2998 (2001)

  24. 24

    Bodin, P. & Bilham, R. 3-D geometry at transform plate boundaries: Implications for seismic rupture. Geophys. Res. Lett. 21, 2523–2526 (1994)

  25. 25

    Kumar, S. et al. Paleoseismic evidence of great surface rupture earthquakes along the Indian Himalaya. J. Geophys. Res. 111 B03304 doi: 10.1029/2004JB003309 (2006)

  26. 26

    Lave, J. et al. Evidence for a great medieval earthquake (1100 A.D.) in the Central Himalayas, Nepal. Science 307, 1302–1305 (2005)

  27. 27

    Brune, J. N., Brown, S. & Johnson, P. A. Rupture mechanism and interface separation in foam rubber models of earthquakes: a possible solution to the heat flow paradox and the paradox of large overthrusts. Tectonophysics 218, 59–67 (1993)

  28. 28

    Bollinger, L., Avouac, J. P., Cattin, R. & Pandey, M. R. Stress buildup in the Himalaya. J. Geophys. Res. 109 doi: 10.1029/2003JB002911 (2004)

  29. 29

    Cisternas, M. et al. Predecessors of the giant 1960 Chile earthquake. Nature 437, 404–407 (2005)

  30. 30

    Bilham, R., Engdahl, E. R., Feldl, N. & Satyabala, S. P. Partial and complete rupture of the Indo-Andaman plate boundary 1847–2004. Seismol. Res. Lett. 76, 299–311 (2005)

  31. 31

    Bilham, R. Earthquakes in India and the Himalaya: Tectonics, geodesy, and history. Ann. Geophys. 74, 839–858 (2004)

  32. 32

    Bilham, R. & Wallace, K. Future Mw>8 earthquakes in the Himalaya: Implications from the 26 Dec 2004 Mw=9.0 earthquake on India's eastern plate margin. Geol. Surv. India Spec. Publ. 85, 1–14 (2005)

  33. 33

    England, P. & Molnar, P. Active deformation of Asia: From kinematics to dynamics. Science 278, 647–650 (1997)

  34. 34

    Tapponnier, P. et al. Oblique stepwise rise and growth of the Tibet Plateau. Science 294, 1671–1677 (2001)

  35. 35

    Bilham, R. & Ambraseys, N. Apparent Himalayan slip deficit from the summation of seismic moments for Himalayan earthquakes, 1500–2000. Curr. Sci. 88, 1658–1663 (2005)

  36. 36

    Larson, K., Burgmann, R., Bilham, R. & Freymueller, J. Kinematics of the India-Eurasia collision zone from GPS measurements. J. Geophys. Res. 104, 1077–1093 (1999)

  37. 37

    Burgmann, R., Larson, K. & Bilham, R. Model inversion of GPS and leveling measurements across the Himalaya: Implications for earthquake hazards and future geodetic networks. Himal. Geol. 20, 59–72 (1999)

  38. 38

    Jouanne, F. et al. Current shortening across the Himalayas of Nepal. Geophys. J. Int. 157, 1–14 (2004)

  39. 39

    Banerjee, P. & Burgmann, R. Convergence across the northwest Himalaya from GPS measurements. Geophys. Res. Lett. 29, 31–34 (2002)

  40. 40

    Jade, S. et al. GPS measurements from the Ladakh Himalaya, India: Preliminary tests of plate-like or continuous deformation in Tibet. Geol. Soc. Am. Bull. 116, 1385–1391 (2004)

  41. 41

    Chen, Q. et al. Spatially variable extension in southern Tibet based on GPS measurements. J. Geophys. Res. 109 B09401 doi: 10.1029/2002JB002350 (2004)

  42. 42

    Feldl, N. Crustal Deformation Across the Himalaya of Central and Eastern Nepal. MSc thesis, Univ. Colorado. (2005)

Download references

Acknowledgements

Discussions with P. Bodin, J. Gomberg, G. King, P. Molnar and W. Szeliga, and written comments from S. Wesnousky, J.-P. Avouac and J. Freymueller, have improved the manuscript. This paper is based upon work supported by the National Science Foundation. Author Contributions The 2003/4 GPS observations in Nepal were conducted by N.F. and R.B., and the planar dislocation models presented here formed the focus of N.F.’s MSc thesis at the University of Colorado.

Author information

Affiliations

  1. CIRES and Department of Geological Sciences, University of Colorado, Boulder, Colorado, 80309, USA

    • Nicole Feldl
    •  & Roger Bilham

Authors

  1. Search for Nicole Feldl in:

  2. Search for Roger Bilham in:

Competing interests

Raw GPS data are available from UNAVCO (http://www.unavco.org/). Reprints and permissions information is available at www.nature.com/reprints. The authors declare no competing financial interests.

Corresponding author

Correspondence to Roger Bilham.

Supplementary information

  1. Supplementary Information

    This file contains Supplementary Figures, Supplementary Data and Supplementary Results. This file also includes a brief description of files used as input to the boundary element program 3D-def coded by Ellis and Gomberg. Sample files are attached ready to be input into the code, which is provided as a .tar file for operation on an Apple unix terminal. (PDF 780 kb)

  2. Supplementary Data 1

    The input file 300map is for 300-km-long unrestrained rupture with a total of 29 planes each divided into 50 segments along strike. The first two planes are a rupture fronting the Himalaya dvided into five segments along-strike and five elements down-dip, the first being a steep ramp and the second a gently dipping decollement. It outputs a map view of the surface strain (suffix .m300) and a segment displacement listing in a north-south line through the center of the rupture. Columns 2 and 3 after the line that starts "for each plane" indicate the start points (distance and depth) of each segment, and columns 5 and 9 indicate the length and dip respectively. The along-strike length of the interseismic driving condition is 3600 km and in this model each segment width is 56.25 km. All elements are freely-slipping (code 12) except the most northerly plane and last listed plane (segment 30 is code 10) which drives the system at 25 mm/year, or in the case of coseismic rupture with an imposed displacement of 25 m. The first two planes specified are the Himalayan rupture, the first plane representing a 45° north-dipping 5.7-km-long ramp-thrust that cuts the surface . If these planes are removed and the number of planes reduced from 17 to 15 in line 2, the file can be used to calculate pre-seismic displacements or interseismic velocities. Strain and displacement changes accompanying rupture can then be obtained by subtracting the two output matrices. (TXT 88 kb)

  3. Supplementary Data 2

    This is an input file to 3ddef (see details below) that produces a strain cross section with the suffix .i400. Length east west is 1700 km, width N/S is 500 km, and it has fewer segments to speed computation. Sixty four along-strike segments are placed beneath the southern plateau, reducing to thirty-two 72 km north of the locking line. As before the rupture consists of two planes each with 25 segments. (TXT 46 kb)

  4. Supplementary Data 3

    This is a tar file that when unpacked produces a folder with 14 files including the executeable 3ddef program compiled in Fortran 91which will run in the terminal mode on Apple computers. See the readme.first for a message from Ellis and Gomberg. The README file from Walter Szeliga lists the changes made to prevent matrix arrays from overflowing. Place the input files section400 or 300map in the folder 3ddef once it has been de-compressed. To run the program from "Terminal", change the directory to 3ddef [cd desktop/3ddef] then type ./3d and enter the appropriately named input file when prompted. The program will run in the background, but will be faster if no other tasks are running. (TAR 240 kb)

About this article

Publication history

Received

Accepted

Issue Date

DOI

https://doi.org/10.1038/nature05199

Further reading

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.