Abstract
While progress in fusion research continues with magnetic1 and inertial2 confinement, alternative approaches—such as Coulomb explosions of deuterium clusters3 and ultrafast laser–plasma interactions4—also provide insight into basic processes and technological applications. However, attempts to produce fusion in a room temperature solid-state setting, including ‘cold’ fusion5 and ‘bubble’ fusion6, have met with deep scepticism7. Here we report that gently heating a pyroelectric crystal in a deuterated atmosphere can generate fusion under desktop conditions. The electrostatic field of the crystal is used to generate and accelerate a deuteron beam (> 100 keV and >4 nA), which, upon striking a deuterated target, produces a neutron flux over 400 times the background level. The presence of neutrons from the reaction D + D → 3He (820 keV) + n (2.45 MeV) within the target is confirmed by pulse shape analysis and proton recoil spectroscopy. As further evidence for this fusion reaction, we use a novel time-of-flight technique to demonstrate the delayed coincidence between the outgoing α-particle and the neutron. Although the reported fusion is not useful in the power-producing sense, we anticipate that the system will find application as a simple palm-sized neutron generator.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on SpringerLink
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Shimomura, Y. & Spears, W. Review of the ITER project. IEEE Trans. Appl. Supercond. 14, 1369–1375 (2004)
Miller, G. H., Moses, E. I. & Wuest, C. R. The National Ignition Facility: enabling fusion ignition for the 21st century. Nucl. Fusion 44, S228–S238 (2004)
Ditmire, T. et al. Nuclear fusion from explosions of femtosecond laser-heated deuterium clusters. Nature 398, 489–492 (1999)
Pretzler, G. et al. Neutron production by 200 mJ ultrashort laser pulses. Phys. Rev. E 58, 1165–1168 (1998)
Taubes, G. Bad Science: The Short Life and Weird Times of Cold Fusion (Random House, New York, 1993)
Taleyarkhan, R. P. et al. Evidence for nuclear emissions during acoustic cavitations. Science 295, 1868–1873 (2002)
Saltmarsh, M. J. & Shapira, D. Questions regarding nuclear emissions in cavitation experiments. Science 297, 1603 (2002)
Glass, A. M. Dielectric, thermal, and pyroelectric properties of ferroelectric LiTaO3 . Phys. Rev. 172, 564–571 (1968)
Rosenblum, B., Braunlich, P. & Carrico, J. P. Thermally stimulated field emission from pyroelectric LiNbO3 . Appl. Phys. Lett. 25, 17–19 (1974)
Riege, H. Electron emission from ferroelectrics—a review. Nucl. Instrum. Methods A 340, 80–89 (1994)
Brownridge, J. D., Shafroth, S. M., Trott, D. W., Stoner, B. R. & Hooke, W. M. Observation of multiple nearly monoenergetic electron production by heated pyroelectric crystals in ambient gas. Appl. Phys. Lett. 78, 1158–1159 (2001)
Rosenman, G., Shur, D., Krasik, Ya. E. & Dunaevsky, A. Electron emission from ferroelectrics. J. Appl. Phys. 88, 6109–6161 (2000)
Ziegler, J. F. The stopping of energetic ions in solids. Nucl. Instrum. Methods 168, 17–24 (1980)
Bosch, H. S. & Hale, G. M. Improved formulas for fusion cross-sections and thermal reactivities. Nucl. Fusion 32, 611–631 (1992)
Nevins, W. M. Can inertial electrostatic confinement work beyond the ion-ion collisional time scale? Phys. Plasmas 2, 3804–3819 (1995)
Farnsworth, P. T. Electric discharge device for producing interactions between nuclei. US Patent No. 3258402 (1966).
Farnsworth, P. T. Method and apparatus for producing nuclear-fusion reactions. US Patent No. 3386883 (1968).
Hirsch, R. L. Inertial-electrostatic confinement of ionized fusion gases. J. Appl. Phys. 38, 4522–4534 (1967)
Mitterauer, J. Micropropulsion for small spacecraft: a new challenge for field effect electric propulsion and microstructured liquid metal ion sources. Surf. Interface Anal. 36, 380–386 (2004)
Agostinelli, S. et al. GEANT4 — a simulation toolkit. Nucl. Instrum. Methods A 506, 250–303 (2003)
Verbinski, V. V. et al. Calibration of an organic scintillator for neutron spectrometry. Nucl. Instrum. Methods 65, 8–25 (1968)
Acknowledgements
The neutron detector was built with funds from DARPA. Funding for various stages of this project was provided by the NSF, ONR and DARPA. We thank W. Wright and K. O'Doherty for demonstrations of electron and ion emission from pyroelectrics, respectively; H. Lockart for machine workshop expertise; K. O'Doherty for evaporating the 50-nm film onto the plastic scintillator; R. Cousins for recommending the use of liquid scintillator for detection and pulse-shape identification of neutrons, and for overseeing the design and construction of a prototype detector using waveform digitization; and T. Venhaus, W. Harbin and J. Hoffer of LANL (ESA-TSE group) for supplying the deuterated target. S. P. thanks A. Erbil for bringing the phenomenon of ferroelectric emission to his attention, along with ref. 10.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Competing interests
The authors declare that they have no competing financial interests.
Supplementary information
Supplementary Methods
Neutron detection methods including energy scale calibration, pulse shape discrimination, and Monte Carlo efficiency calculation. (PDF 545 kb)
Supplementary Video S1
This movie is a real-time presentation of the crystal fusion raw data shown in Figure 2 including raw PMT traces of valid neutron hits. (MPG 10184 kb)
Supplementary Video S2
This movie shows the phosphor screen image (25.4 mm diameter) of an ion beam produced upon heating a pyroelectric crystal. Deuterium gas pressure was set to 0.2 Pa. The phosphor intensity, as measured by a CCD camera, is proportional to beam current density. In the central frame, the phosphor intensity is displayed topographically. (MPG 10292 kb)
Supplementary Figure S1
This figure shows the phosphor screen image (25.4 mm diameter) of an ion beam produced upon heating a pyroelectric crystal. The four frames were taken from Supplementary Movie 2. They were separately normalized and gamma corrected to enhance detail. Note the copper mesh's shadow and the FIM image of the tungsten tip. (JPG 64 kb)
Rights and permissions
About this article
Cite this article
Naranjo, B., Gimzewski, J. & Putterman, S. Observation of nuclear fusion driven by a pyroelectric crystal. Nature 434, 1115–1117 (2005). https://doi.org/10.1038/nature03575
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1038/nature03575
This article is cited by
-
Giant pyroelectricity in nanomembranes
Nature (2022)
-
X-Ray Generation during Piezoelectric Lighter Operation in Vacuum
Glass and Ceramics (2021)
-
Piezoelectric Accelerator
Scientific Reports (2018)
-
Neutron Yield Increase by Simulated Pyroelectric Crystal Neutron Source
Journal of Fusion Energy (2017)
-
Multiphysics and Thermodynamic Formulations for Equilibrium and Non-equilibrium Interactions: Non-linear Finite Elements Applied to Multi-coupled Active Materials
Archives of Computational Methods in Engineering (2016)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.