Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Low-temperature processing of ‘baroplastics’ by pressure-induced flow


The manufacturing of plastics traditionally involves melt processing at temperatures typically greater than 200 °C—to enable extrusion or moulding under pressure into desired forms—followed by solidification. This process consumes energy and can cause substantial degradation of polymers and additives (such as flame retardants and ultraviolet stabilizers), limiting plastics performance and recyclability1. It was recently reported that the application of pressure could induce melt-like behaviour in the block copolymer polystyrene-block-poly(n-butyl methacrylate) (PS-b-PBMA)2, and this behaviour has now been demonstrated in a range of other block copolymer systems3,4,5,6,7,8. These polymers have been termed baroplastics2,3,4,5. However, in each case, the order-to-disorder transition, which gives rise to the accompanying change in rheology from soft solid to melt9,10, was observed at temperatures far exceeding the glass transition temperatures (Tg) of both components. Here we show that baroplastic systems containing nanophase domains of one high-Tg and one low-Tg component can exhibit melt-like flow under pressure at ambient temperature through an apparent semi-solid partial mixing mechanism that substantially preserves the high-Tg phase. These systems were shredded and remoulded ten times with no evident property degradation. Baroplastics with low-temperature formability promise lower energy consumption in manufacture and processing, reduced use of additives, faster production and improved recyclability, and also provide potential alternatives to current thermoplastic elastomers, rubber-modified plastics, and semi-crystalline polymers11,12.

This is a preview of subscription content, access via your institution

Access options

Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.

Figure 1: Processed baroplastics samples.
Figure 2: Small-angle neutron scattering intensity, I(q), versus wavevector, q, plots.
Figure 3: Heat flow versus temperature traces from differential scanning calorimetry, DSC.


  1. Herbst, H., et al. in Frontiers in the Science and Technology of Recycling (ed. Akovali, G.) 73–101 (Kluwer Academic, Dordrecht, The Netherlands, 1997)

    Google Scholar 

  2. Pollard, M., Russell, T. P., Ruzette, A. V., Mayes, A. M. & Gallot, Y. The effect of hydrostatic pressure on the lower critical ordering transition in diblock copolymers. Macromolecules 31, 6493–6498 (1998)

    ADS  CAS  Article  Google Scholar 

  3. Ruzette, A.-V. G., Mayes, A. M., Pollard, M., Russell, T. P. & Hammouda, B. Pressure effects on the phase behavior of styrene/n-alkyl methacrylate block copolymers. Macromolecules 36, 3351–3356 (2003)

    ADS  CAS  Article  Google Scholar 

  4. Ruzette, A.-V. G., Banerjee, P., Mayes, A. M. & Russell, T. P. A simple model for baroplastic behavior in block copolymer melts. J. Chem. Phys. 114, 8205–8209 (2001)

    ADS  CAS  Article  Google Scholar 

  5. Ryu, D. Y., Lee, D. J., Kim, J. K., Lavery, K. A. & Russell, T. P. Effect of hydrostatic pressure on closed-loop phase behavior of block copolymers. Phys. Rev. Lett. 90, 235501 (2003)

    ADS  Article  Google Scholar 

  6. Hasegawa, H. et al. Small-angle neutron scattering studies on phase behavior of block copolymers. J. Phys. Chem. Solids 60, 1307–1312 (1999)

    ADS  CAS  Article  Google Scholar 

  7. Frielinghaus, H., Schwahn, D., Mortensen, K., Almdal, K. & Springer, T. Composition fluctuations and coil conformations in a poly(ethylene-propylene)-poly(ethyl ethylene) diblock copolymer as a function of temperature and pressure. Macromolecules 29, 3263–3271 (1996)

    ADS  CAS  Article  Google Scholar 

  8. Schwahn, D., Frielinghaus, H., Mortensen, K. & Almdal, K. Temperature and pressure dependence of the order parameter fluctuations, conformational compressibility, and the phase diagram of the PEP-PDMS diblock copolymer. Phys. Rev. Lett. 77, 3153–3156 (1996)

    ADS  CAS  Article  Google Scholar 

  9. Russell, T. P., Karis, T. E., Gallot, Y. & Mayes, A. M. Lower critical ordering transition in a diblock copolymer melt. Nature 368, 729–731 (1994)

    ADS  CAS  Article  Google Scholar 

  10. Ryu, D. Y., Jeong, U., Kim, J. K. & Russell, T. P. Closed-loop phase behaviour in block copolymers. Nature Mater. 1, 114–117 (2002)

    ADS  CAS  Article  Google Scholar 

  11. Holden, G. et al. in Thermoplastic Elastomers (ed. Holden, G.) 573–599 (Hanser, Munich/Vienna/New York, 1996)

    Google Scholar 

  12. Ehrenstein, G. H. Polymeric Materials 63–89, 98–116 (Hanser, Munich, 2001)

    Book  Google Scholar 

  13. Ruzette, A.-V. G. & Mayes, A. M. A simple free energy model for weakly interacting polymer blends. Macromolecules 34, 1894–1907 (2001)

    ADS  CAS  Article  Google Scholar 

  14. Gonzalez-Leon, J. A. & Mayes, A. M. Phase behavior prediction of ternary polymer mixtures. Macromolecules 36, 2508–2515 (2003)

    ADS  CAS  Article  Google Scholar 

  15. Ruzette, A.-V. G. et al. Phase behavior of diblock copolymers between styrene and n alkyl methacrylates. Macromolecules 31, 8509–8517 (1998)

    ADS  CAS  Article  Google Scholar 

  16. Hajduk, D. A., Urayama, P., Gruner, S. M. & Erramilli, S. High-pressure effects on the disordered phase of block copolymer melts. Macromolecules 28, 7148–7156 (1995)

    ADS  CAS  Article  Google Scholar 

  17. Hajduk, D. A., Gruner, S. M., Erramilli, S., Register, R. A. & Fetters, L. J. High-pressure effects on the order/disorder transition in block copolymer melts. Macromolecules 29, 1473–1481 (1996)

    ADS  CAS  Article  Google Scholar 

  18. Steinhoff, B. et al. Pressure dependence of the order-to-disorder transition in polystyrene/polyisoprene and polystyrene/ poly(methylphenylsiloxane) diblock copolymers. Macromolecules 31, 36–40 (1998)

    ADS  CAS  Article  Google Scholar 

  19. Migler, K. B. & Han, C. C. Static and kinetic study of a pressure-induced order-disorder transition: birefringence and neutron scattering. Macromolecules 31, 300–305 (1998)

    Article  Google Scholar 

  20. Patten, T. E. & Matyjaszewski, K. Atom transfer radical polymerization and the synthesis of polymeric materials. Adv. Mater. 10, 901–915 (1998)

    CAS  Article  Google Scholar 

  21. Malmstrom, E. E. & Hawker, C. J. Macromolecular engineering via ‘living’ free radical polymerizations. Macromol. Chem. Phys. 199, 923–935 (1998)

    Google Scholar 

  22. Hillmyer, M. Block copolymer synthesis. Curr. Opin. Solid State Mater. Sci. 4, 559–564 (1999)

    ADS  CAS  Article  Google Scholar 

  23. Ha, J. W., Park, I. J., Lee, S. B. & Kim, D. K. Preparation and characterization of core–shell particles containing perfluoroalkyl acrylate in the shell. Macromolecules 35, 6811–6818 (2002)

    ADS  CAS  Article  Google Scholar 

  24. Keddie, J. L. Film formation of latex. Mater. Sci. Eng. R 21, 101–170 (1997)

    Article  Google Scholar 

  25. Dos Santos, F. D. & Leibler, L. Large deformation films from soft-core/hard-shell hydrophobic latexes. J. Polym. Sci. B 41, 224–234 (2003)

    CAS  Article  Google Scholar 

  26. Lovell, P. A. & Pierre, D. in Emulsion Polymerization and Emulsion Polymers (eds Lovell, P. A. & Aasser, M. S.) 657–695 (John Wiley & Sons, New York, 1997)

    Google Scholar 

  27. Flemings, M. C. Behavior of metal alloys in the semisolid state. Metall. Trans. B 22, 269–293 (1991)

    Article  Google Scholar 

  28. Shipp, D. A., Wang, J.-L. & Matyjaszewski, K. Synthesis of acrylate and methacrylate block copolymers using atom transfer radical polymerization. Macromolecules 31, 8005–8008 (1998)

    ADS  CAS  Article  Google Scholar 

  29. Cassebras, M., Pascual, S., Polton, A., Tardi, M. & Vairon, J. P. Synthesis of di- and triblock copolymers of styrene and butyl acrylate by controlled atom transfer radical polymerization. Macromol. Rapid Commun. 20, 261–264 (1999)

    CAS  Article  Google Scholar 

Download references


We acknowledge the support of the Seaver Institute, the Lord Foundation, Lord Corporation, the MRSEC Program of the National Science Foundation and the Office of Naval Research. This work benefited from the use of the Los Alamos Neutron Science Center at the Los Alamos National Laboratory, funded by the US Department of Energy.

Author information

Authors and Affiliations


Corresponding author

Correspondence to Anne M. Mayes.

Ethics declarations

Competing interests

The authors declare that they have no competing financial interests.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Gonzalez-Leon, J., Acar, M., Ryu, SW. et al. Low-temperature processing of ‘baroplastics’ by pressure-induced flow. Nature 426, 424–428 (2003).

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing