The specific bonding of DNA base pairs provides the chemical foundation for genetics. This powerful molecular recognition system can be used in nanotechnology to direct the assembly of highly structured materials with specific nanoscale features, as well as in DNA computation to process complex information. The exploitation of DNA for material purposes presents a new chapter in the history of the molecule.
“The nucleic-acid 'system' that operates in terrestrial life is optimized (through evolution) chemistry incarnate. Why not use it ... to allow human beings to sculpt something new, perhaps beautiful, perhaps useful, certainly unnatural.” Roald Hoffmann, writing in American Scientist, 1994 (ref. 1).
The DNA molecule has appealing features for use in nanotechnology: its minuscule size, with a diameter of about 2 nanometres, its short structural repeat (helical pitch) of about 3.4–3.6 nm, and its 'stiffness', with a persistence length (a measure of stiffness) of around 50 nm. There are two basic types of nanotechnological construction: 'top-down' systems are where microscopic manipulations of small numbers of atoms or molecules fashion elegant patterns (for example, see ref. 2), while in 'bottom-up' constructions, many molecules self-assemble in parallel steps, as a function of their molecular recognition properties. As a chemically based assembly system, DNA will be a key player in bottom-up nanotechnology.
The origins of this approach date to the early 1970s, when in vitro genetic manipulation was first performed by tacking together molecules with 'sticky ends'. A sticky end is a short single-stranded overhang protruding from the end of a double-stranded helical DNA molecule. Like flaps of Velcro, two molecules with complementary sticky ends — that is, their sticky ends have complementary arrangements of the nucleotide bases adenine, cytosine, guanine and thymine — will cohere to form a molecular complex.
Sticky-ended cohesion is arguably the best example of programmable molecular recognition: there is significant diversity to possible sticky ends (4N for N-base sticky ends), and the product formed at the site of this cohesion is the classic DNA double helix. Likewise, the convenience of solid support-based DNA synthesis3 makes it is easy to program diverse sequences of sticky ends. Thus, sticky ends offer both predictable control of intermolecular associations and predictable geometry at the point of cohesion. Perhaps one could get similar affinity properties from antibodies and antigens, but, in contrast to DNA sticky ends, the relative three-dimensional orientation of the antibody and the antigen would need to be determined for every new pair. The nucleic acids seem to be unique in this regard, providing a tractable, diverse and programmable system with remarkable control over intermolecular interactions, coupled with known structures for their complexes.
There is, however, a catch; the axes of DNA double helices are unbranched lines. Joining DNA molecules by sticky ends can yield longer lines, perhaps with specific components in a particular linear or cyclic order in one dimension. Indeed, the chromosomes packed inside cells exist as just such one-dimensional arrays. But to produce interesting materials from DNA, synthesis is required in multiple dimensions and, for this purpose, branched DNA is required.
Branched DNA occurs naturally in living systems, as ephemeral intermediates formed when chromosomes exchange information during meiosis, the type of cell division that generates the sex cells (eggs and sperm). Prior to cell division, homologous chromosomes pair, and the aligned strands of DNA break and literally cross over one another, forming structures called Holliday junctions. This exchange of adjacent sequences by homologous chromosomes — a process called recombination — during the formation of sex cells passes genetic diversity onto the next generation.
The Holliday junction contains four DNA strands (each member of a pair of aligned homologous chromosomes is composed of two DNA strands) bound together to form four double-helical arms flanking a branch point (Fig. 1a). The branch point can relocate throughout the molecule, by virtue of the homologous sequences. In contrast, synthetic DNA complexes can be designed to have fixed branch points containing between three and at least eight arms4,5. Thus, the prescription for using DNA as the basis for complex materials with nanoscale features is simple: take synthetic branched DNA molecules with programmed sticky ends, and get them to self-assemble into the desired structure, which may be a closed object or a crystalline array (Fig. 1a).
Other modes of nucleic acid interaction aside from sticky ends are available. For example, Tecto-RNA molecules6, held together by loop–loop interactions, or paranemic crossover (PX) DNA, where cohesion derives from pairing of alternate half turns in inter-wrapped double helices7. These new binding modes represent programmable cohesive interactions between cyclic single-stranded molecules that do not require cleavage to expose bases to pair molecules together. Nevertheless, cohesion using sticky ends remains the most prominent intermolecular interaction in structural DNA nanotechnology.
It is over a decade since the construction of the first artificial DNA structure, a stick-cube, whose edges are double helices8 (Fig. 1b). More complex polyhedra and topological constructs9, such as knots and Borromean rings (consisting of three intricately interlinked circles), followed. But the apparent floppiness of individual branched junctions led to a hiatus before the next logical step: self-assembly into two-dimensional arrays.
This step required a stiffer motif, as it was difficult to build a periodic well-structured array with marshmallow-like components, even with a well-defined blueprint (sticky-ended specificity) for their assembly. The stiffer motif was provided by the DNA double-crossover (DX) molecule10, analogous, once again, to the double Holliday-junction intermediate formed during meiosis (MDX, Fig. 2a). This stiff molecule contains two double helices connected to each other twice through crossover points. It is possible to program DX molecules to produce a variety of patterned two-dimensional arrays just by controlling their sticky ends11,12,13 (Fig. 2b).
In addition to objects and arrays, a number of DNA-based nanomechanical devices have been made. The first device consisted of two DX molecules connected by a shaft with a special sequence that could be converted from normal right-handed DNA (known as B-DNA) to an unusual left-handed conformation, known as Z-DNA14. The two DX molecules lie on one side of the shaft before conversion and on opposite sides after conversion, which leads to a rotation. The problem with this device is that it is activated by a small molecule, Co(NH3)3+6, and with all devices sharing the same stimulus, an ordered collection of DX molecules would not produce a diversity of responses.
This problem was solved by Bernard Yurke and colleagues, who developed a protocol for a sequence-control device that has a tweezers-like motion15. The principle behind the device is that a so-called 'set' strand containing a non-pairing extension hybridizes to a DNA-paired structural framework and sets a conformation; another strand that is complementary to the 'set' strand is then added, which binds to both the pairing and non-pairing portions, and removes it from the structure, leaving only the framework.
A robust rotary device was developed based on this principle16 (Fig. 3), in which different set strands can enter and set the conformation to different structural end-states. In this way, the conformation of the DNA device can readily be flipped back and forth simply by adding different set strands followed by their complements. A variety of different devices can be controlled by a diverse group of set strands.
DNA as a scaffold
What is the purpose of constructing DNA arrays and nanodevices? One prominent goal is to use DNA as scaffolding to organize other molecules. For example, it may be possible to use self-assembled DNA lattices (crystals) as platforms to position biological macromolecules so as to study their structure by X-ray crystallography4 (Fig. 4a). Towards this goal, programming of DNA has been used to bring protein molecules in proximity with each other to fuse multiple enzymatic activities17. However, the potential of this approach awaits the successful self-assembly of three-dimensional crystals.
Another goal is to use DNA crystals to assemble nanoelectronic components in two- or three-dimensional arrays18 (Fig. 4b). DNA has been shown to organize metallic nanoparticles as a precursor to nanoelectronic assembly19,20,21,22, but so far it has not been possible to produce multidimensional arrays containing nanoelectronic components with the high-structural order of the naked DNA arrays described earlier.
There has been some controversy over whether DNA can be used as an electrical conductor (for example, ref. 23), although the resolution of this debate is unlikely have any impact on the use of DNA as a scaffold. Recently, the effects of DNA conformational changes on conduction in the presence of an analyte were shown to have potential as a biosensor24.
Replicating DNA components
A natural question to ask of any assembly system based on DNA is whether the components can be replicated. To produce branched DNA molecules whose branch points do not move, they must have different sequences in opposite branches but, as a consequence, these structures are not readily reproduced by DNA polymerase; the polymerase would produce complements to all strands present, leading only to double helical molecules. One option is to use topological tricks to convert structures like the DNA cube into a long single strand by adding extra stretches of DNA bases. The single strand could then be replicated by DNA polymerase and the final replicated product induced to fold into the original shape, with any extraneous segments cleaved using restriction enzymes. Although this would produce a molecule with sticky ends ready to participate in self-assembly, it would be a cumbersome process25.
Günter von Kiedrowski and colleagues have recently developed a way of replicating short, simple DNA branches in a mixed organic–DNA species. Their branched molecule consists of three DNA single strands bonded to an organic triangle-shaped linker. To replicate the branched molecule, the single-stranded complement of each of these strands is bound to the molecule, so that one end of each complement molecule is close to the same end of the other complement molecule. In the final step, the juxtaposed complements are connected together by bonding their neighbouring ends to another molecule of the organic linker26. Extension of this system to the next level, such as objects like the cube, will need to solve topological problems involved in the separation of the two components, or it will be limited to unligated systems.
Many separate capabilities of DNA nanotechnology have been prototyped — it is now time to extend and integrate them into useful systems. Combining sequence-dependent devices with nanoscale arrays will provide a system with a vast number of distinct, programmable structural states, the sine qua non of nanorobotics. A key step in realizing these goals is to achieve highly ordered three-dimensional arrays, both periodic and, ultimately, algorithmic.
Interfacing with top-down nanotechnology will extend markedly the capabilities of the field. It also will be necessary to integrate biological macromolecules or other macromolecular complexes into DNA arrays in order to make practical systems with nanoscale components. Likewise, the inclusion of electronic components in highly ordered arrays will enable the organization of nanoelectronic circuits. Chemical function could be added to DNA arrays by adding nucleic acid species evolved in vitro to have specific binding properties ('aptamers') or enzymatic activities ('ribozymes' or 'DNAzymes'). A further area that has yet to have an impact on DNA nanotechnology is combinatorial synthesis, which may well lead to greater diversity of integrated components. DNA-based computation and algorithmic assembly is another active area of research, and one that is impossible to separate from DNA nanotechnology (see Box 1).
The field of DNA nanotechnology has attracted an influx of researchers over the past few years. All of those involved in this area have benefited from the biotechnology enterprise that produces DNA-modifying enzymes and unusual components for synthetic DNA molecules. It is likely that applications in structural DNA nanotechnology ultimately will use variants on the theme of DNA (for example, peptide nucleic acids, containing an unconventional synthetic peptide backbone and nucleic acid bases for side chains), whose properties may be better suited to particular types of applications.
For the past half-century, DNA has been almost exclusively the province of biologists and biologically oriented physical scientists, who have studied its biological impact and molecular properties. During the next 50 years, it is likely they will be joined by materials scientists, nanotechnologists and computer engineers, who will exploit DNA's chemical properties in a non-biological context.
This work has been supported by grants from the National Institute of General Medical Sciences, the Office of Naval Research, the National Science Foundation, and the Defense Advanced Research Projects Agency/Air Force Office of Scientific Research.
About this article
Journal of Electronic Materials (2019)