The number of microbial genomes sequenced each year is expanding rapidly, in part due to genome-resolved metagenomic studies that routinely recover hundreds of draft-quality genomes. Rapid algorithms have been developed to comprehensively compare large genome sets, but they are not accurate with draft-quality genomes. Here we present dRep, a program that reduces the computational time for pairwise genome comparisons by sequentially applying a fast, inaccurate estimation of genome distance, and a slow, accurate measure of average nucleotide identity. dRep achieves a 28 × increase in speed with perfect recall and precision when benchmarked against previously developed algorithms. We demonstrate the use of dRep for genome recovery from time-series datasets. Each metagenome was assembled separately, and dRep was used to identify groups of essentially identical genomes and select the best genome from each replicate set. This resulted in recovery of significantly more and higher-quality genomes compared to the set recovered using co-assembly.
Genome-resolved metagenomics involves the recovery of genomes directly from environmental shotgun DNA sequence datasets (Tyson et al., 2004). This is generally performed by assembling short-read sequences into longer scaffolds, followed by binning together scaffolds belonging to the same genomes. Metagenomic analysis of related samples from the same ecosystem is often employed to investigate compositional stability and spatial or temporal variation. The approach can also reveal microbial co-occurrence patterns and identify factors or processes that control organism abundances. Analysis of sample series data is also important technically, as different abundance patterns across the sample series for different organisms provide valuable constraints for binning (Sharon et al., 2013). In this process, reads from individual samples are mapped back to a collection of genomes that is often obtained by combining the reads from all samples and assembling them together (co-assembly; Bendall et al., 2016; Lee et al., 2017; Vineis et al., 2016). However, co-assembly dramatically increases the data set size and complexity, especially when multiple different strains of the same species are present across the sample series, and can result in fragmented assemblies (Sczyrba et al., 2017).
Independent assembly should generate more and higher-quality genomes than the co-assembly based approach because the complexity of individual samples is lower than that of the combination of samples (Supplementary Figure S1). The challenge that arises from independent assembly is that de-replication of the resulting genome set is required (Raveh-Sadka et al., 2015; Probst et al., 2016; Olm et al., 2017). De-replication involves identifying genomes that are the ‘same’ from a larger set, as well as determining the highest quality genome in each replicate set. This is important to maximize the accuracy of metabolic predictions and other downstream analyses.
De-replication requires pairwise genome comparisons, and the number of comparisons required scales quadratically with an increasing number of genomes. Hundreds of thousands of CPU hours may be needed to de-replicate larger genome sets with robust algorithms (gANI; Varghese et al., 2015). Mash, a recently developed algorithm that utilizes MinHash distance to estimate similarity between genomes, is an attractive alternative due to its incredibly fast speed (Ondov et al., 2016). However, we found that the accuracy of MASH decreases as the completeness of the compared genome bins decreases (Figure 1a). Thus, it cannot be used to de-replicate collections of partial genomes.
Here we present dRep, a program that utilizes both gANI and Mash in a bi-phasic approach to dramatically reduce the computational time required for genome de-replication, while ensuring high accuracy. The genome set is first divided into primary clusters using Mash, and then each primary cluster is compared in a pairwise manner using gANI, forming secondary clusters of near-identical genomes that can be de-replicated. Using published information about time required for genome comparisons, we performed an in silico simulation of de-replication time for Mash, gANI, and dRep (Figure 1b). The results indicate that dRep affords a multiple orders of magnitude increase in computation efficiency compared to naïve gANI.
To verify this prediction and to test dRep’s accuracy, we ran dRep on 1,125 genomes assembled from 195 fecal metagenomes collected from 21 premature infants during the first months of life (Raveh-Sadka et al., 2016). Genomes were 50–100% complete and contained between 0% and 24% contamination according to checkM (Parks et al., 2015). dRep clustered genomes in an identical manner to naïve gANI using default parameters, and showed near-perfect precision and recall using a variety of other parameters (Supplementary Table S1). Mash, on the other hand, resulted in a recall of 51.3% and a precision of 99.9% when compared to gANI, consistent with underestimation of similarity between incomplete genomes (Figure 1a). The actual run times were also very close to those predicted by our simulation: 92 versus 93 CPU hours for dRep, 2673 vs 2784 CPU hours for naïve gANI (actual vs predicted run times), and <1 CPU hour in both cases for Mash. As the run-time of dRep depends on the diversity of the genome set, and pre-term infant gut communities are especially non-diverse (Gibson et al., 2016; Ward et al., 2016), even greater increases in computational efficiency are expected from most other environments than predicted by our simulation.
We analyzed the same 195 metagenomes to test the prediction that, for each infant, individual assembly and de-replication would generate more and higher-quality genomes than co-assembly of the read datasets. We de-replicated genomes obtained from assemblies generated from each sample individually as well as from a co-assembly (to recover low-abundance genomes), and recovered a de-replicated genome set with 39% more bins (75% complete, 5% contaminated) than were obtained from co-assembly alone (270 vs 194 genomes; Figure 1c). 76 bins were recovered only from individual assemblies, 35 only from co-assemblies, and 159 from both methods.
We next compared genomes recovered using both methods. A Wilcoxon signed-ranks test indicated that scaffold length, as measured by N50, was significantly higher in genomes from dRep (median=34 046 bp) than genomes assembled from co-assemblies (median=26 103 bp), P=4.0e−11. Completeness was also significantly higher in genomes from dRep than co-assembly overall (P=6.0e−8), and although the median value was the same for genomes from both sets (median=98.3%), the 5% quantiles were different (91.6% vs 84.9%, respectively; Supplementary Table S2). Visualizations of the similarity between groups of genomes were also generated using dRep (Figures 1d and e; Supplementary Figure S2). These may be particularly valuable for comparing the population structures of groups of genomes. Taken together, dRep enabled recovery of more and better genomes than co-assembly alone, and is an effective tool for exploring the similarity among large set of genomes.
We used a published fecal metagenome data set with known strain heterogeneity to explore the effect of within-population variation on assembly and genome recovery (Sharon et al., 2013). Samples from the single infant were either co-assembled or samples were assembled individually and then de-replicated using dRep. In the case of Staphylococus hominis, co-assembly generated a contaminated bin (that is, many duplicate and triplicate single copy genes; Figure 2a). In contrast, a near-complete, uncontaminated genome was recovered from several individual time-points. Previous work on the same data set (Eren et al., 2015) has shown manual bin curation of the co-assembled bin with anvi’o can increase the S. hominis bin quality (73% complete; 6.6% redundant), but still not to the level of the un-curated bin from the individual assembly (98% complete; 0% redundant).
For Staphylococcus aureus, both co-assembly and individual assembly resulted in near-complete and uncontaminated genomes. However, alignment of the scaffolds from both S. aureus assemblies to a complete S. aureus reference genome showed that the genome from the co-assembly was more fragmented than that from the single sample assembly. (Figures 2b and c). Fragmentation was also concentrated in areas of extensive population variation, as evident based on SNPs between metagenome reads and the genome sequence (Figure 2d). Genome fragmentation in sites of elevated strain variation could systematically decrease measures of within-population heterogeneity that rely on mapping reads to reconstructed genome sequences (Bendall et al., 2016; Quince et al., 2016).
It is both logical, based on the well known effects of sample complexity, and clear from the analysis of human microbiome samples presented here, that assembly of data from individual samples followed by de-replication has major advantages over co-assembly (especially as co-assembled genomes can be included in the de-replication process). Because it relies on Mash, dRep can only be used if the genomes in the comparison set are >50% complete. dRep combines checkM for completeness-based genome filtering (Parks et al., 2015), Mash (Ondov et al., 2016) for fast grouping of similar genomes, gANI (Varghese et al., 2015) or ANIm (Richter and Rosselló-Móra, 2009) for accurate genomic comparisons, and Scipy (Jones et al., 2001) for hierarchical clustering. In the case of viruses and plasmids, dRep requires use of an independent method to estimate genome completeness because there are currently no established metrics for this in checkM.
dRep is easy to use, highly customizable, and parallelizable. If desired, dRep can perform rapid pairwise genomic comparisons (without de-replication) to enable visualization of the degree of similarity among groups of similar genomes (Figure 1; Supplementary Figure 2). Version 0.5.5 of dRep is available in the Supplementary Information section (Supplemental Data 1 and 2), and for up-to-date source-code, installation instructions, and the manual, see https://github.com/MrOlm/drep.
Funding was provided by the Sloan Foundation (http://www.sloan.org/, grant number: G 2012-10-05, PI: JFB) and the National Institutes of Health (NIH; award reference number 5R01-AI-092531). This material is based upon work supported by the National Science Foundation Graduate Research Fellowship under Grant No. DGE 1106400.
About this article
Supplementary Information accompanies this paper on The ISME Journal website (http://www.nature.com/ismej)
Strain-resolved analysis of hospital rooms and infants reveals overlap between the human and room microbiome
Nature Communications (2017)