Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

A nanometre-scale mechanical electrometer


The mechanical detection of charge has a long history, dating back more than 200 years to Coulomb's torsion-balance electrometer1. The modern analogues of such instruments are semiconductor-based field-effect devices, the most sensitive of which are cryogenically cooled single-electron transistors2. But although these latter devices have extremely high charge sensitivity, they suffer from limited bandwidth and must be operated at millikelvin temperatures in order to reduce thermal noise. Here we report the fabrication and characterization of a working nanometre-scale mechanical electrometer. We achieve a charge sensitivity of 0.1 e Hz−0.5, competitive with conventional semiconductor field-effect transistors; moreover, thermal noise analysis indicates that the nanometre-scale electrometer should ultimately reach sensitivities of the order of 10−6e Hz−0.5, comparable with charge-detection capabilities of cryogenic single-electron transistors. The nanometre-scale electrometer has the additional advantages of high temperature (4.2 K) operation and response over a larger bandwidth, from which a diversity of applications may result.

This is a preview of subscription content

Access options

Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.

Figure 1: Nanometre-scale charge detector.
Figure 2: Amplitude of the induced EMF across the small loop (inner paddle) of the resonator, as a function of the frequency of the drive current passed through the large loop (outer paddle).
Figure 3: Measurement scheme used to measure changes in the phase of the induced EMF as a function of coupled charge, for fixed drive current frequency of 2.617 MHz.
Figure 4: Measured charge noise as a function of frequency, using the measurement set-up shown in Fig. 3.


  1. Coulomb, C. A. Memoires de l'Academie Royale des Sciences 229–236 (Academie royale des sciences, Paris, (1784).

    Google Scholar 

  2. Zimmerli, G., Eiles, T. M., Kautz, R. L. & Martinis, J. M. Noise in the Coulomb blockade electrometer. Appl. Phys. Lett. 61, 237–239 (1992).

    ADS  Article  Google Scholar 

  3. Cleland, A. N. & Roukes, M. L. Fabrication of high frequency nanometer scale mechanical resonators from bulk Si crystals. Appl. Phys. Lett. 69, 2653–2655 (1996).

    ADS  CAS  Article  Google Scholar 

  4. Albrecht, T. R., Grutter, P., Horne, D. & Rugar, D. Frequency modulation detection using high-Q cantilevers for enhanced force microscope sensitivity. J. Appl. Phys. 69, 668–673 (1991).

    ADS  Article  Google Scholar 

  5. Robins, W. P. Phase Noise in Signal Sources: Theory and Applications (Peregrinus, London, (1984)).

    Book  Google Scholar 

  6. Greywall, D. S., Yurke, B., Busch, P. A., Pargellis, A. N. & Willett, R. L. Evading amplifier noise in nonlinear oscillators. Phys. Rev. Lett. 72, 2992–2995 (1994).

    ADS  CAS  Article  Google Scholar 

  7. Yurke, B., Greywall, D. S., Pargellis, A. N. & Busch, P. A. Theory of amplifier noise evasion in an oscillator employing a nonlinear resonator. Phys. Rev. A 51, 4211–4229 (1995).

    ADS  CAS  Article  Google Scholar 

  8. Bordoni, F., Maggi, G., Ottaviano, A. & Pallotino, G. V. Very low noise cooled audiofrequency preamplifier for gravitational research. Rev. Sci. Instrum. 52, 1079–1086 (1981).

    ADS  Article  Google Scholar 

  9. Stern, J. E., Terris, B. D., Mamin, H. J. & Rugar, D. Deposition and imaging of localized charge in insulator surfaces using a force microscope. Appl. Phys. Lett. 53, 2717–2719 (1988).

    ADS  Article  Google Scholar 

  10. Schonenberger, C. & Alvarado, S. F. Observation of single charge carriers by force microscopy. Phys. Rev. Lett. 65, 3162–3164 (1990).

    ADS  CAS  Article  Google Scholar 

  11. Pendry, J. B., Kirkman, P. D. & Castano, E. Electrons at disordered surfaces and 1/f noise. Phys. Rev. Lett. 57, 2983–2986 (1986).

    ADS  CAS  Article  Google Scholar 

  12. Cleland, A. N., Esteve, D., Urbina, C. & Devoret, M. H. Very low noise photodector based on the single electron transistor. Appl. Phys. Lett. 61, 2820–2822 (1992).

    ADS  CAS  Article  Google Scholar 

  13. Yoo, M. J. et al. Scanning single-electron transistor microscopy: Imaging individual charges. Science 276, 579–582 (1997).

    CAS  Article  Google Scholar 

Download references


This work was supported by DARPA ETO/MEMS.

Author information

Authors and Affiliations


Corresponding author

Correspondence to M. L. Roukes.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Cleland, A., Roukes, M. A nanometre-scale mechanical electrometer. Nature 392, 160–162 (1998).

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI:

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing