Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Lubrication of Metal Surfaces by Fatty Acids


WHEN surfaces in relative motion are separated by a fluid layer of appreciable thickness, the resistance to motion is due to the viscosity of the interposed layer. This type of lubrication is essentially a problem in hydrodynamics; the friction is very small and there is no wear of the moving surfaces. It is clear, however, that in many practical cases fluid lubrication is impossible. In many sliding mechanisms, or at the beginning and end of a reciprocating stroke, it is difficult for a thick continuous film of lubricant to be maintained, and even in rotating parts the thick film may break down and only a thin film of lubricant may remain. In such cases the friction is influenced by the nature of the underlying surfaces as well as the chemical constitution of the lubricant, and Hardy referred to such a state as ‘boundary lubrication’. Boundary lubrication is of great importance in practice, and the nature of the surface film will determine whether serious wear or seizure will take place. The coefficient of friction for really clean metals which have been out-gassed in a good vacuum is high and may be1 about μ = 6. For ordinary unlubricated metal surfaces which are exposed to the air the coefficient of friction is of the order of μ = 0·5–1. For metal surfaces lubricated with a boundary film μ is about 0·05–0·15. This is considerably less than for clean surfaces, but is much higher than for fluid lubrication.

This is a preview of subscription content, access via your institution

Relevant articles

Open Access articles citing this article.

Access options

Rent or buy this article

Prices vary by article type



Prices may be subject to local taxes which are calculated during checkout


  1. Bowden and Hughes, Proc. Roy. Soc., A, 160, 575 (1937).

    ADS  CAS  Google Scholar 

  2. Hardy, "Collected Works" (Camb. Univ. Press, 1936).

    Google Scholar 

  3. Sameshima et al., Bull. Chem. Soc. Japan, 11, 659 (1936).

    Article  Google Scholar 

  4. Beare and Bowden, Phil. Trans., A, 234, 329 (1935).

    Article  ADS  Google Scholar 

  5. Bowden and Leben, Proc. Roy. Soc., A, 169, 371 (1939).

    ADS  Google Scholar 

  6. Langmuir, J. Franklin Inst., 218, 143 (1934).

    Article  CAS  Google Scholar 

  7. Bowden and Leben, Phil. Trans., A, 239, 1 (1940).

    Article  ADS  Google Scholar 

  8. Hughes and Whittingham, Trans. Farad. Soc., 38, 9 (1942).

    Article  CAS  Google Scholar 

  9. Frewing, Proc. Roy. Soc., A, 181, 23 (1942).

    ADS  CAS  Google Scholar 

  10. Isemura, Bull. Chem. Soc., Japan, 15, 467 (1940).

    Article  CAS  Google Scholar 

  11. Bowden, Leben and Tabor, Trans. Farad. Soc., 35, 900 (1939).

    Article  CAS  Google Scholar 

  12. Tabor, Nature, 145, 308 (1940); 147, 609 (1941).

    Article  ADS  CAS  Google Scholar 

  13. Dubrisay, C.R. Acad. Sci., 210, 533 (1940).

    CAS  Google Scholar 

  14. Lawrence, Trans. Farad. Soc., 34, 1 (1938).

    Article  Google Scholar 

  15. Tanaka, Mem. Coll. Science, Kyoto Univ., 21, 85 (1938); 22, 377 (1939).

    CAS  Google Scholar 

  16. Beeck, Givens and Smith, Proc Roy. Soc., A, 177, 90 (1940).

    ADS  CAS  Google Scholar 

  17. Bowden, Moore and Tabor, J. Appl. Phys., 14, 80 (1943).

    Article  ADS  Google Scholar 

  18. Sakmann, Burwell and Irvine, J. Appl. Phys., 15, 459 (1944).

    Article  ADS  Google Scholar 

  19. Bowden and Moore, Nature, 155, 451 (1945).

    Article  ADS  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations


Rights and permissions

Reprints and Permissions

About this article

Cite this article

BOWDEN, F., GREGORY, J. & TABOR, D. Lubrication of Metal Surfaces by Fatty Acids. Nature 156, 97–101 (1945).

Download citation

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing