Centrifugal Stresses in Rotating Disks

Article metrics

Abstract

IN recent experiments at this laboratory, the photo-elastic method has been successfully applied to the determination of centrifugal stresses in rotating disks. The new technique depends upon the double structure of Bakelite BT-61-8931. Bakelite consists of two phases, one of which (the A phase) fuses at relatively low temperatures. If a sample is heated, the viscosity of the A phase is rapidly lowered until it becomes virtually negligible at about 115°C., whereas the C phase is little affected. At this temperature the modulus of elasticity is reduced to 1/640 of its value at room temperature and the stress-optical coefficient is increased twenty-five times. If the specimen is subjected to external load at this temperature, and allowed to cool slowly to room temperature while still under load, the deformation and photo-elastic optical effect are ‘frozen in’. This is brought about by the solidification of the liquid A phase within the space lattice formed by the C phase. Subsequent removal of load leaves the deformation and optical pattern virtually unaltered.

Access options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

References

  1. 1

    For a complete account, see Hetenyi, M., "The Fundamentals of Three-Dimensional Photoelasticity", J. App. Mech., (Dec. 1938).

Download references

Author information

Rights and permissions

Reprints and Permissions

About this article

Cite this article

NEWTON, R. Centrifugal Stresses in Rotating Disks. Nature 143, 981 (1939) doi:10.1038/143981a0

Download citation

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.