Techniques and instrumentation articles within Nature Communications

Featured

  • Article
    | Open Access

    Solar-driven artificial food synthesis from CO2 provides an approach to overcome the limitations of natural photosynthesis, but it is very challenging. Here, the authors report a hybrid electrocatalytic-biocatalytic flow system, coupling photovoltaics-powered electrocatalysis (CO2 to formate) with a five enzyme cascade platform (formate to sugar), which achieves conversion of CO2 to C6 sugar (L-sorbose) with a solar-to-food energy conversion efficiency of 3.5%.

    • Guangyu Liu
    • , Yuan Zhong
    •  & Yujie Xiong
  • Article
    | Open Access

    Li et al. report large circular dichroism in 2D chiral perovskite single crystals, arises from the inorganic sublattice, instead of chiral ligands, driven by electron-hole exchange interactions. This is evidenced by both reflective circular dichroism spectroscopy and ab initio theory.

    • Shunran Li
    • , Xian Xu
    •  & Peijun Guo
  • Article
    | Open Access

    2D materials are being investigated for several applications in micro- and nanoelectronics, but their weak adhesion represents a critical challenge for device integration. Here, the authors propose a button shear testing method to evaluate the adhesion forces of various large-area 2D films on SiO2 and Si3N4 substrates.

    • Josef Schätz
    • , Navin Nayi
    •  & Max C. Lemme
  • Article
    | Open Access

    Mask-free multi-photon lithography allows the straightforward fabrication of nanostructures, but high precision and good resolution can be challenging to achieve. Here, the authors report a combination of photo-inhibition and chemical quenchers for improved lithography performance.

    • Lingling Guan
    • , Chun Cao
    •  & Xu Liu
  • Article
    | Open Access

    Achieving uniform spin excitation, crucial for MRI, is challenging in the electrically large human body at UHF. Here, authors introduce an innovative dielectric waveguide specifically designed for traveling-wave MRI, which enhances homogeneity and efficiency through effective wave manipulation.

    • Yang Gao
    • , Tong Liu
    •  & Xiaotong Zhang
  • Article
    | Open Access

    Polaritons, light-matter hybridized quasiparticles, are the fundamental excitation of strong coupling systems and are widely applicable in information technologies. Here the authors applied the concept of time-of-flight measurement in terahertz induced second harmonic generation experiments in various systems to comprehensively study the dispersion relation of phonon-polaritons and reveal potential spin-lattice couplings.

    • Tianchuang Luo
    • , Batyr Ilyas
    •  & Nuh Gedik
  • Article
    | Open Access

    Common stereolithography-based 3D printing relies on photopolymerization using photoinitiators. Here, the authors replace the conventional photoinitiators with low-cost, widely used thermal initiators to achieve 3D-printed objects.

    • Doron Kam
    • , Omri Rulf
    •  & Shlomo Magdassi
  • Article
    | Open Access

    The translation of perovskite solar cells to large-area devices fabricated by industry-relevant manufacturing methods remains a critical challenge. Here, authors report solar modules with serially-interconnected cells produced entirely by industrial roll-to-roll printing under ambient conditions.

    • Hasitha C. Weerasinghe
    • , Nasiruddin Macadam
    •  & Doojin Vak
  • Article
    | Open Access

    Area selective atomic layer deposition (AS-ALD) has been recently proposed as a controlled growth method, but the patterning resolution and selectivity require improvements. Here, the authors report a superlattice-based AS-ALD method to deposit various materials onto 2D MoS2-MoSe2 lateral superlattices, with a minimum half-pitch size of ~ 10 nm.

    • Jeongwon Park
    • , Seung Jae Kwak
    •  & Kibum Kang
  • Article
    | Open Access

    Quickly acquiring topographical information from a sample remains a challenge in optics. Here, the authors introduce encoded search focal scan, a technique for sub-micrometric imaging of tens of topographies per second based on collecting a reduced set of images.

    • Narcís Vilar
    • , Roger Artigas
    •  & Guillem Carles
  • Article
    | Open Access

    Current approaches for volumetric super-resolution microscopy can yield large and complex PSF spatial footprints. Here, the authors show a super-resolution microscopy approach using a hexagonal microlens array, which offers speed improvements in volumetric imaging compared to other single-molecule methods.

    • Sam Daly
    • , João Ferreira Fernandes
    •  & Steven F. Lee
  • Article
    | Open Access

    Structurally coloured composite films are flexible optical materials with potential in a range of applications, but their production is impacted by long time-frames and limited materials. Here, the authors report a method for the production of large scale films by shearing supramolecular composites.

    • Miaomiao Li
    • , Bolun Peng
    •  & Jintao Zhu
  • Article
    | Open Access

    Direct growth of piezoelectric oxides on glass is difficult due to high processing temperatures. Here, the authors demonstrate a flash lamp process for the growth of films on various glasses in a few seconds only. The films have piezoelectric e33,f of −5 C m−2 and can be used in haptic devices.

    • Longfei Song
    • , Juliette Cardoletti
    •  & Sebastjan Glinšek
  • Article
    | Open Access

    Solidification cracking during fusion welding of high-strength aluminum alloys has been a long-standing issue. Here, the authors achieve reliable and crack-free welding of 2024 aluminum alloy using a Zr-core-Al-shell wire and the oscillating laser-arc hybrid welding technique.

    • Jun Jin
    • , Shaoning Geng
    •  & Xiangqi Wang
  • Article
    | Open Access

    Porosity is a key issue in additive manufacturing (AM). Here, the authors reveal the bubble evolution mechanisms including formation, coalescence, pushing, growth, entrainment, escape, and entrapment during directed energy deposition AM using in situ X-ray imaging and multiphysics modelling.

    • Kai Zhang
    • , Yunhui Chen
    •  & Peter D. Lee
  • Article
    | Open Access

    The electrochemical oxygen reduction reaction plays an important role in new energy technologies such as fuel cells and metal-air batteries. Here the authors present a cobalt catalyst with a symmetry-broken Cl−Co−N4 moiety capable of dynamically modulating electron occupancy at active sites during practical reaction conditions to optimize oxygen reduction performance.

    • Meihuan Liu
    • , Jing Zhang
    •  & Qinghua Liu
  • Article
    | Open Access

    The Young’s modulus of the MXene Ti3C2Tx, theoretically predicted to be 0.502 TPa, has not yet been experimentally confirmed. This work supplants previous reports using nanoindentation with the correctly measured Young’s modulus of 0.484 ± 0.013 TPa.

    • Chao Rong
    • , Ting Su
    •  & Fu-Zhen Xuan
  • Article
    | Open Access

    Relating the degree of network crosslinking as a descriptor to the desalination performance of crosslinked polymer membranes remains challenging. Here, the authors introduce a parameter based on distinct amide bonds per unit mass of polyamide, to unravel the relationship between the crosslinked networks of polyamide membranes and their desalination performance.

    • Yu-Ren Xue
    • , Chang Liu
    •  & Zhi-Kang Xu
  • Article
    | Open Access

    Researchers developed an open-hardware structured illumination microscopy add-on. This affordable upgrade provides super-resolution capabilities for normal optical microscopes. Detailed instructions enable easy reproduction to help democratize advanced microscopy.

    • Mélanie T. M. Hannebelle
    • , Esther Raeth
    •  & Georg E. Fantner
  • Article
    | Open Access

    Electrode potential in any electrochemical systems has long been discussed by classical Debye-Hückel theory which holds only under extremely dilute concentrations. Here, the authors establish the concept ‘liquid Madelung potential’ to comprehensively describe the potential shift at practical concentrations.

    • Norio Takenaka
    • , Seongjae Ko
    •  & Atsuo Yamada
  • Article
    | Open Access

    High and medium-entropy alloys have shown excellent mechanical performance, yet the role of short-range order (SRO) on these properties has been unclear. Here, the authors demonstrate that the reduction of SRO by deformation leads to rejuvenation, explaining their remarkable damage tolerance.

    • Yang Yang
    • , Sheng Yin
    •  & Andrew M. Minor
  • Article
    | Open Access

    Many material properties are governed by the internal dislocation network within the material. Here, the authors describe a method to determine the three dimensional position and type of dislocations from a measurement along only a single direction within a scanning transmission electron microscope.

    • Tore Niermann
    • , Laura Niermann
    •  & Michael Lehmann
  • Article
    | Open Access

    X-ray Free Electron Lasers allow fast structure determination. Here, the authors push the temporal limit of atomic level structure determination to 25 fs, the length of a single pulse, paving the way to the study of fast, non-repeatable processes.

    • Gábor Bortel
    • , Miklós Tegze
    •  & Gyula Faigel
  • Article
    | Open Access

    The evolution of Pd-based material during CO2 electroreduction requires further investigation. Here the authors use in-situ liquid-phase transmission electron microscopy and select area diffraction characterization techniques to visualize the morphological and phase structure evolution of the Pd/PdHx catalysts under CO2 electroreduction conditions.

    • Ahmed M. Abdellah
    • , Fatma Ismail
    •  & Drew Higgins
  • Article
    | Open Access

    Lightweight flexible piezoelectric polymers are demanded for various applications, but restricted by the low instinctively piezoelectric coefficient and complex poling process. Here, the authors develop a high performance lightweight, flexible self-poled piezoelectric polymer composite towards sustainable self-powered sensing and energy harvesting.

    • Zhao-Xia Huang
    • , Lan-Wei Li
    •  & Jin-Ping Qu
  • Article
    | Open Access

    Scanning tunnelling microscopy-based H desorption lithography is used for atomic-scale patterning of quantum devices in Si, but its time-consuming nature hinders scalability. Here the authors report H desorption from Si(001):H surface using extreme-UV light and explore implications for patterning.

    • Procopios Constantinou
    • , Taylor J. Z. Stock
    •  & Steven R. Schofield
  • Article
    | Open Access

    Process development for 3D printing of new metal alloys can be time-consuming and variability in the printing outcome makes it even more challenging. Here, authors demonstrate an in-situ method using high-speed imaging and deep learning to accelerate the process design for a more consistent quality.

    • David Guirguis
    • , Conrad Tucker
    •  & Jack Beuth
  • Article
    | Open Access

    Magnetic resonance imaging is a useful clinical tool, but its widespread use is constrained by size, cost, and time. Here, the authors report the development of a magnetic resonance sensor for the clinical detection of muscle tissue, allowing for new point-of-care quantitative diagnostic measurements

    • Sydney E. Sherman
    • , Alexa S. Zammit
    •  & Michael J. Cima
  • Article
    | Open Access

    Drones are an effective and flexible tool for safety assessment of aging infrastructure, especially in locations with challenging accessibility. Here, authors demonstrate a phase-based sampling moiré technique with a drone for measurement of millimeter-scale infrastructural displacement in bridges.

    • Shien Ri
    • , Jiaxing Ye
    •  & Norihiko Ogura
  • Article
    | Open Access

    The interaction of flexoelectric polarization arising from strain gradients with ferroelectricity impacts tribological properties and facilitates fine physical lithography without masks or chemicals, with potential applications in various fields.

    • Seongwoo Cho
    • , Iaroslav Gaponenko
    •  & Seungbum Hong