Featured
-
-
Article
| Open Access
Improvement of roughness in ultrasonic assisted magnetorheological finishing of small titanium alloy nuts by orthogonal test method
- Cheng Bi
- , Axiang Ji
- & Fenfen Zhou
-
Article
| Open Access
Water adsorption on surfaces of calcium aluminosilicate crystal phase of stone wool: a DFT study
- Thi H. Ho
- , Nguyen-Hieu Hoang
- & Thuat T. Trinh
-
Article
| Open Access
Investigation of damping coefficients for elastic collision particles utilizing the acoustic frequency sampling method
- Xinlin Shi
- , Wenzhen Zhong
- & Dengchao Sun
-
Article
| Open Access
Research on mix design and mechanical performances of MK-GGBFS based geopolymer pastes using central composite design method
- Ziqi Yao
- , Ling Luo
- & Changwei Qu
-
Article
| Open Access
Three-dimensional biphase fabric estimation from 2D images by deep learning
- Daniel Chou
- , Matias Etcheverry
- & Chloé Arson
-
Article
| Open Access
Exploring the preparation of YbBa2Cu3O7−y superconductor in flowing oxygen atmosphere
- Yanan Wang
- , Zerong Zhang
- & Qiuliang Wang
-
Article
| Open Access
Formations of force network and softening of amorphous elastic materials from a coarsen-grained particle model
- Rei Kurita
- , Yuto Tamura
- & Marie Tani
-
Article
| Open Access
High-performance cementitious composites containing nanostructured carbon additives made from charred coal fines
- Yuan Gao
- , Viet Hung Pham
- & Christopher S. Matranga
-
Article
| Open Access
Assessment of mechanical behavior of sprayed concrete reinforced with waste tire textile fibers
- Behzad Khosh
- & Hadi Atapour
-
Article
| Open Access
Bioactive and biodegradable cotton fabrics produced via synergic effect of plant extracts and essential oils in chitosan coating system
- Bolesław Szadkowski
- , Magdalena Śliwka-Kaszyńska
- & Anna Marzec
-
Article
| Open Access
Experimental study to compare the strength of concrete with different amounts of polypropylene fibers at high temperatures
- Yanhui Wang
- , Faezeh Nejati
- & Ramin Goudarzi Karim
-
Article
| Open Access
An active machine learning approach for optimal design of magnesium alloys using Bayesian optimisation
- M. Ghorbani
- , M. Boley
- & N. Birbilis
-
Article
| Open Access
Short-term creep approach to redefining the role of 17-4PH stainless steel for high-temperature applications
- S. Spigarelli
- , M. Cabibbo
- & E. Santecchia
-
Article
| Open Access
Long-span fiber composite truss made by coreless filament winding for large-scale satellite structural systems demonstrated on a planetary sunshade concept
- Pascal Mindermann
- , Denis Acker
- & Götz T. Gresser
-
Article
| Open Access
Effect of different shapes of steel fibers and palygorskite-nanofibers on performance of ultra-high-performance concrete
- Yingying Huang
- , Dewen Kong
- & Bing wu
-
Article
| Open Access
Effect of borax-modified activator on mechanical properties and drying shrinkage of alkali-activated slag/metakaolin mortar
- Haiming Chen
- , Ziguang Qin
- & Peng Wu
-
Article
| Open Access
Dynamic performance of functionally graded composite structures with viscoelastic polymers
- Shaoqing Wang
- , Yaqin Song
- & Weigang Wang
-
Article
| Open Access
Pr3+-doped YPO4 nanocrystal embedded into an optical fiber
- Dominik Dorosz
- , Marcin Kochanowicz
- & Matthias Jäger
-
Article
| Open Access
Study on numerical simulation and mechanical properties of anchor cable with C-shaped tube subjected to shearing
- Renliang Shan
- , Shengchao Xiao
- & Shupeng Zhang
-
Article
| Open Access
Acellular porcine Achilles tendon patch encapsulating tendon-derived stem cells for rotator cuff repair in a rabbit model
- Huawei Wen
- & Yushun Fang
-
Article
| Open Access
Explaining the entropy forming ability for carbides with the effective atomic size mismatch
- Andreas Kretschmer
- & Paul Heinz Mayrhofer
-
Article
| Open Access
Electrochemical properties of MnSe inclusions and improving the pitting corrosion resistance of stainless steel via Se microalloying
- Masashi Nishimoto
- , Tomoki Katsuyama
- & Izumi Muto
-
Article
| Open Access
Microstructural characterization and inductively coupled plasma-reactive ion etching resistance of Y2O3–Y4Al2O9 composite under CF4/Ar/O2 mixed gas conditions
- Ho Jin Ma
- , Seonghyeon Kim
- & Young-Jo Park
-
Article
| Open Access
Effects of the addition of short straight steel fibers on the strength and strains of high-strength concrete during compression
- Maciej Kaźmierowski
- , Roman Jaskulski
- & Michał Kordasz
-
Article
| Open Access
Simulation of interfacial debonding in hollow particle reinforced composites with VCFEM
- Zhiyi Wang
- & Rui Zhang
-
Article
| Open Access
High-temperature tensile strength of C/SiC composite under laser-induced high heating flux in an aerobic environment
- Jiawei Wang
- , Bin Li
- & Yanlong Shen
-
Article
| Open Access
Properties of sandcrete blocks stabilized with cashew apple ash as a partial replacement for cement
- Peter Korankye
- & Humphrey Danso
-
Article
| Open Access
Effect of laser beam incidence angle on weld formation mechanism and corrosion resistance of T2 copper/304 stainless steel
- Yubo Wang
- , Wei Liu
- & Guipeng Lu
-
Article
| Open Access
Performance of castor oil polyurethane resin in composite with the piassava fibers residue from the Amazon
- Rosinaldo Rabelo Aparício
- , Gabrielle Machado dos Santos
- & Cristina Gomes da Silva
-
Article
| Open Access
Prospective cold metal working and analysis of deformation susceptibility of CuMg alloys with high magnesium content
- Paweł Strzępek
- & Małgorzata Zasadzińska
-
Article
| Open Access
Study of Urbach energy and Kramers–Kronig on Mn and Zn doped NiFe2O4 ferrite nanopowder for the determination of structural and optical characteristics
- N. Nazari
- , M. M. Golzan
- & Kh. Mabhouti
-
Article
| Open Access
Influence of nano-BN inclusion and mechanism involved on aluminium-copper alloy
- Ziqi Zhang
- , Qi Zeng
- & Rong Li
-
Article
| Open Access
Color-switching hydrogels as integrated microfluidic pressure sensors
- Lucie Ducloué
- , Md. Anamul Haque
- & Anke Lindner
-
Article
| Open Access
Interface frictional anisotropy of dilative sand
- Muhammad Naqeeb Nawaz
- , Seung-Hun Lee
- & Taeseo Ku
-
Article
| Open Access
Enhanced triglyceride adsorption by steam-activated bamboo charcoal based on molecular dynamics investigations
- Hegang Zhu
- , Sheng Zhang
- & Guifeng Wang
-
Article
| Open Access
Investigations on the effect of natural veined calcite on the mechanical properties of limestone
- Qingzhi Chen
- , Yuanming Liu
- & Quan Zhang
-
Article
| Open Access
Structural design and dynamic characteristics analysis of braided composite two-stage gear transmission system
- Weiliang Zhang
-
Article
| Open Access
A comparative analysis of RCC and composite buildings using the new plastic deformation (PD) method
- Zhang Qing Qing
- & Zhang Li Na
-
Article
| Open Access
Revealing process and material parameter effects on densification via phase-field studies
- Marco Seiz
- , Henrik Hierl
- & Wolfgang Rheinheimer
-
Article
| Open Access
Significant reduction in creep life of P91 steam pipe elbow caused by an aberrant microstructure after short-term service
- Hongyu Zhou
- , Jian Li
- & Yinsheng He
-
Article
| Open Access
Production, characterization and performance of green geopolymer modified with industrial by-products
- Ramadan Abbas
- , M. A. Abdelzaher
- & M. A. Tantawy
-
Article
| Open Access
Microstructure reconstruction of 2D/3D random materials via diffusion-based deep generative models
- Xianrui Lyu
- & Xiaodan Ren
-
Article
| Open Access
Discrete element simulation of vibration compaction of slag subgrade
- Hu Peng
- , Chen Jiazhen
- & Chi Lianyang
-
Article
| Open Access
Experimental study and finite element analysis of heavy-duty escalator truss under full load conditions
- Ning Li
- , Zhongxi Cao
- & Mingming Yan
-
Article
| Open Access
Development and research of a SS-level universal double-beam assembled bridge barrier
- Qianmiao Bu
- , Xinpeng Ning
- & Lei Ma
-
Article
| Open Access
Experimental study of energy‑absorbing and support characteristics of glass microsphere-filled steel tube columns under uniaxial compression
- Jia-hui Ma
- , Qiu-di Sun
- & Xiao-bin Yang
-
Article
| Open Access
Estimation of compressive strength of waste concrete utilizing fly ash/slag in concrete with interpretable approaches: optimization and graphical user interface (GUI)
- Yakubu Dodo
- , Kiran Arif
- & Yaser Gamil
-
Article
| Open Access
Prediction of heavy-section ductile iron fracture toughness based on machine learning
- Liang Song
- , Hongcheng Zhang
- & Hai Guo
-
Article
| Open Access
Enhancement of the mechanical properties in ultra-low weight SWCNT sandwiched PDMS composites using a novel stacked architecture
- Pavithra Ananthasubramanian
- , Rahul Sahay
- & Nagarajan Raghavan
Design and analysis of a complementary structure-based high selectivity tri-band frequency selective surface