Introduction

Exocytosis is a fundamental cellular process that mediates secretion of biologically active molecules to the extracellular environment and transport of lipids and membrane proteins to the plasma membrane in eukaryotic cells1. This process occurs with fusion between secretory vesicles and the plasma membrane. In the initial step of the fusion, it has been postulated that the vesicles and the plasma membrane are physically and reversibly connected through a heterooctameric protein complex termed the exocyst complex2. The exocyst complex is required for trafficking of secretory vesicles to the plasma membrane3,4,5. The disruption of its function causes defects in various biological processes including cell polarity6, cell migration7, primary ciliogenesis8, neurite outgrowth9 and autophagy10. The initial connection between trafficking vesicles and their target membranes has also been postulated in other intracellular trafficking pathways and is traditionally called tethering. The tethering process may accelerate capture of the specific vesicles and/or the following SNARE complex assembly for catalyzing the membrane fusion11. The exocyst complex belongs to a family of evolutionally conserved complexes associated with tethering containing helical rods (CATCHR), which includes other multisubunit tethering complexes (MTC) such as conserved oligomeric Golgi (COG), Dsl1 and Golgi-associated retrograde protein (GARP) complexes12.

The exocyst complex consists of Sec3, Sec5, Sec6, Sec8, Sec10, Sec15, Exo70 and Exo84. The genes encoding Sec3, Sec5, Sec6, Sec8, Sec10 and Sec15 were first isolated from temperature-sensitive secretory-deficient (sec) mutants of budding yeast3. Then, the other two subunits Exo70 and Exo84 were biochemically identified from the exocyst complex purified from yeast and rat, respectively4,5. To date, three-dimensional structures of near-full-length or partial forms of Sec3, Sec5, Sec6, Sec15, Exo70 and Exo84 have been reported: yeast Sec375–241 and Sec375–260, rat Sec54–95, yeast Sec6411–805, fruitfly Sec15383–699, yeast Exo7067–623, mouse Exo7085–653, thale cress Exo7075–629, yeast Exo84525–753 and rat Exo84171–27913,14,15,16,17,18,19,20,21. Core helical regions of Sec6, Sec15, Exo70 and Exo84 exhibit similar rodlike structures, which are composed of consecutively packed α-helix bundles with a characteristic α-solenoid topology. Bioinformatics analysis has predicted that all exocyst subunits contain similar rodlike structures22, although three-dimensional structures of the core helical regions of Sec3, Sec5, Sec8 and Sec10 remain unknown. Structures of other CATCHR subunits also adopt the conserved α-solenoid topology, suggesting that the CATCHR family members have diverged from a common ancestor to become specialized in their specific trafficking pathways12.

Pairwise interactions between the individual exocyst subunits have been investigated by pull-down and yeast two-hybrid assays (summarized in ref. 22). Furthermore, two recent studies that monitored the subunit assembly occurring in cells suggest that the exocyst complex can be divided into two assembly modules: one contains Sec3, Sec5, Sec6 and Sec8, whereas the other contains Sec10, Sec15, Exo70 and Exo8423,24. Sec10 appears to serve as a central hub for bridging these two assembly modules, possibly through its interaction with Sec6 and/or Sec823,24. The functional importance of Sec10 has been assessed by enhancement or suppression of Sec10 at the cellular level9,25,26. Overexpression of Sec10 increases the exocyst-mediated vesicular trafficking to the bud in yeast and to the basolateral surface in Madin-Darby canine kidney cells. Conversely, overexpression of dominant-negative Sec10 or knockdown or knockout of Sec10 causes morphological defects in budding yeast or inhibition of neurite outgrowth in neurons. In mammalian cells, Sec10 interacts with small GTPase Arf6, which can restrict clathrin-mediated endocytosis sites to the apical surface of epithelial cells27,28,29. Sec10 is also involved in the primary ciliogenesis on the apical surface30, besides targeting trafficking vesicles to the basolateral surface of epithelial cells.

Despite the importance of Sec10 in exocyst-mediated cellular processes, three-dimensional structural information of Sec10 remains unknown. In this study, we report the near-full-length structure of zebrafish Sec10 (zSec10). This structure provides the first atomic details of this exocyst subunit.

Results

Overall structure

The recombinant full-length zSec10 (residues 1–708) tended to aggregate during purification. This property is similar to that of rat Sec10 (rSec10), from which we failed to obtain high-resolution crystals. It was assumed that the aggregation properties of full-length zSec10 and rSec10 might be due to partial structural disorders, which were predicted computationally using the program DISOPRED231 (Fig. 1A) and experimentally by limited proteolytic analyses. On the basis of the information on the computationally and experimentally predicted disordered regions, we designed sets of expression constructs of rSec10 and zSec10 (Supplementary Table 1) and tested their expression in Escherichia coli, purification and crystallization. Basically, removal of the major predicted disordered regions enhanced the expression of soluble rSec10 and zSec10 in E. coli and improved their stability during purification. Among the expression constructs tested in this study, we obtained clusters of daggerlike small crystals from zSec10195–708 (Δ385–394). For data collection, single crystals of the native or selenomethionine (SeMet)-substituted zSec10 were grown by streak seeding with crushed native crystals as the seed. Bromide soaking improved the diffraction from ~4 Å to 3 Å or higher. The structure of zSec10195–708 (Δ385–394) was determined by a single-wavelength anomalous dispersion (SAD) method and refined to 2.73 Å. The crystals contain one protein molecule per asymmetric unit. Residues 378–384 and 395–402 were invisible, probably owing to the structural disorder. The final refined model includes 10 bromide atoms and 2 water molecules. The bound bromide atoms were confirmed using an anomalous difference Fourier map, although their anomalous signals were insufficient for phasing. Data collection and refinement statistics are shown in Table 1.

Figure 1: Overall structure of zSec10195–708 (Δ385–394).
figure 1

(A) Schematic figures representing the predicted disordered regions (residues 23–37, 57–89, 115–128, 365–412, 468–480 and 565–569 in black, top) and domain architecture of zSec10195–708 (Δ385–394) (bottom), residues 378–384 and 395–402 are invisible in the structure. The domain boundaries were defined on the basis of the crystal structure of zSec10195–708 (Δ385–394). Domains (A–E) are in yellow, blue, red, green and purple, respectively. (B) Crystal structure of zSec10195–708 (Δ385–394). The coloring scheme of each domain is the same as that in (A).

Full size image
Table 1 Data collection and refinement statistics.
Full size table

zSec10 folds into an elongated rod with dimensions of 150 Å × 40 Å × 25 Å. The structure of zSec10 can be divided into five domains A–E, each of which is composed of an antiparallel helix bundle. Domains A, B–D and E contain three (H1–H3), four (H4–H7, H8–H11, H13–H16) and two (H17–H18) helices, respectively (Fig. 1B). These domains are connected by long solvent-exposed loops (residues 373–412 connecting domains B and C, and residues 555–573 connecting domains C and D) or short turns (residues 239–245 connecting domains A and B, and residues 666–670 connecting domains D and E). Helix H7 is shared between domains B and C, whereas helix H11 is shared between domains C and D. These two long helices serve as the bridge connecting two adjoining subdomains. Similar bridge helices have also been found in other CATCHR subunits, indicating a common mechanism of building a long rodlike protein from individual helix bundles in the CATCHR subunits. The Sec10 residues that are highly conserved among representative species are located mainly in four regions: (i) the loop connecting helices H2 and H3, (ii) the hydrophobic core stabilizing the helix bundle composed of helices H6, H7 and H8, (iii) helix H12 located within the long loop between domains C and D, and (iv) the hydrophobic core maintaining the relative spatial arrangement of domains D and E (Figs 2 and 3). Most of them are hydrophobic residues that are buried inside the protein.

Figure 2: Amino-acid sequence alignment of Sec10.
figure 2

Amino-acid sequence alignment of Sec10 from 8 representative organisms (Danio rerio, Homo sapiens, Mus musculus, Rattus norvegicus, Gallus gallus, Drosophila melanogaster, Caenorhabditis elegans and Saccharomyces cerevisiae). The invariant residues are indicated as white characters with a red background, whereas the conserved residues are indicated as red characters. The α-helical regions are represented as boxes above the alignment. The coloring scheme is based on the domain assignment shown in Fig. 1B. The residues comprising the four main conserved regions (i)–(iv) are indicated by orange, cyan, grey and light green triangles, respectively.

Full size image
Figure 3: Residue conservation of zSec10.
figure 3

Surface representation that shows the residue conservation of zSec10. The level of residue conservation is indicated as a brown gradient. Two black arrows indicate the conserved Lys556 and Lys557 exposed in the C-terminal region. The close-up views show the conserved hydrophobic cores that stabilize the helix bundle composed of helices H6, H7 and H8 (top) and the relative conformation between domains D and E (bottom).

Full size image

In our limited proteolytic experiment of zSec10, tryptic cleavage occurred at Arg394 and generated two polypeptides corresponding to the N- and C-terminal halves. These two polypeptides were co-eluted as a single peak in gel-filtration chromatography (Supplementary Fig. 1A), indicating that the N- and C-terminal halves of Sec10 can interact with each other, even without the linker connecting them. The hydrogen bond between the conserved Glu353 in helix H7 and Arg429 in helix H8 may contribute to this interdomain interaction, together with the nearby hydrophobic residues (Supplementary Fig. 1B).

Comparison with CATCHR subunits and their structurally related proteins

The crystal structure of zSec10195–708 (Δ385–394) bears an expectedly strong resemblance in helical topology to other subunits of the exocyst complex and other CATCHR subunits16,17,19,21,32,33,34 with Z-scores of 6.6–15.6 and rmsd values of 4.0–9.6 Å (calculated by the Dali server35) (Fig. 4A). A similar topology is also shared with the Sec6-homologous protein M-Sec, the globular tail domain of the myosin V family, the MUN domain of the Munc13 family and the t-SNARE protein Sso136,37,38,39 with Z-scores of 6.3–14.6 and rmsd values of 3.9–6.8 (Fig. 4B). Among these proteins, the near-full-length structures of only Exo70, M-Sec and Tip20 have been determined. Sec10 exhibits a straight rod structure similarly to Exo70 and M-Sec, but differs in shape from Tip20, which adopts a sharply hooked structure at the junction between domains B and C (Fig. 4). The N-terminal half of yeast Exo70 exhibits a strongly negative charge, whereas the C-terminal half a positive charge. On the other hand, mouse Exo70 is negatively charged overall18. Mouse M-Sec is also negatively charged overall, except for the positively charged C-terminal end36 (Fig. 5). In contrast, zSec10 shows no substantial charge polarity on its surface, but several negatively or positively charged pockets were observed in its C-terminal half (Fig. 5). The zSec10 structure, as well as the Tip20 and M-Sec structures, shows no biased distribution of hydrophobicity on its surface, although the C-terminal half of yeast Sec10 was predicted to be more hydrophobic than the N-terminal half26 (Supplementary Fig. 3).

Figure 4: Structural comparison of zSec10 with other CATCHR subunits and their structurally related proteins.
figure 4

The rmsd and Z-score calculated using the Dali server are shown below each structure. The lengths of alignment for calculating rmsd are shown in parentheses. (A) Structural comparison of zSec10 with other CATCHR subunits (A. thaliana Exo70 [PDB 4RL5], S. cerevisiae Exo84 [PDB 2D2S], S. cerevisiae Sec6 [PDB 2 FJI], D. melanogaster Sec15 [PDB 2A2F], H. sapiens Cog4 [PDB 3HR0], S. cerevisiae Tip20 [PDB 3FHN], K. lactis Dsl1 [PDB 3K8P] and M. musculus Vps54 [PDB 3N1B]). (B) Structural comparison of zSec10 with its structurally related proteins (M. musculus M-Sec [PDB 5B86], H. sapiens myosin Va [PDB 4LLI], R. norvegicus Munc13–1 [PDB 3SWH] and S. cerevisiae Sso1 [PDB 1FIO]).

Full size image
Figure 5: Electrostatic surface potential distribution of zSec10.
figure 5

Electrostatic surface potential of zSec10, yeast Exo70, mouse Exo70 and mouse M-Sec on a scale from −10 kBT/e (red) to +10 kBT/e (blue). Black and white arrows indicate negatively and positively charged patches in the C-terminal half of zSec10, respectively. The potential interaction site for Arf6 and the conserved positively charged patch in the C-terminal end are encircled by purple and cyan dotted lines, respectively.

Full size image

For other CATCHR subunits, the structures of their C-terminal halves have been reported (Fig. 4A). Structural classification using the Dali server35 indicated that Sec10 is most similar to Cog4 with the best Z-score of 15.6 and rmsd value of 4.0 Å (Fig. 4A) among all CATCHR subunits and their structurally related proteins of known structures. Pairwise superposition of Sec10 onto other CATCHR subunits (Sec6, Cog4, Tip20, Dsl1, M-Sec and MyoVa) highlights the remarkable structural conservation of domain D with an average rmsd value of 2.1 Å; domains C and E seem more divergent than domain D with average rmsd values of 3.5 and 3.2 Å, respectively (Cog4 was excluded for domain C, because two helices are missing in the domain C structure of Cog4) (Supplementary Fig. 2).

Common functional domain D

Domain D of the CATCHR subunit is functionally important. For example, the Rho3-binding site of Exo70 and the Rab11-binding site of Sec15 are located within the third helix of domain D, which corresponds to helix H15 in zSec1017,40 (Supplementary Fig. 2). Mutations of Sec6 that cause mislocalization of the exocyst complex are positioned in the third helix (residues 624–645) of domain D in Sec6, which corresponds to helix H13 in zSec1041. A conserved positively charged patch in M-Sec is located in the short turn between the helices corresponding to helices H14 and H15 of zSec1036. Mutations in the positively charged patch eliminated the M-Sec-induced membrane protrusion. In Sec6, Cog4, Tip20 and M-Sec, domain E is additionally flanked by domain D (Fig. 4). Domains D and E of Cog4 interact with each other through the electrostatic interaction between the conserved arginine and glutamate residues. Mutations disturbing this interaction cause cell surface glycosylation defects32.

In yeast, the C-terminal half of Sec10 is required for its tethering function, whereas the N-terminal half of Sec10 has been suggested to engage in the assembly of the exocyst complex26. The C-terminal half (i.e., domains C–E) of Sec10 reportedly interacts with Arf627. In the zSec10 structure, a conserved hydrophobic interaction stabilizes the relative conformation between domains D and E, as mentioned above. Deletion of the C-terminal region of rSec10 (residues 606–708), including most parts of domain D and the entire domain E, prevents the association of rSec10 with Arf6, as shown by yeast two-hybrid assay27. The corresponding region of zSec10 forms a cave with negative charges, which are derived primarily from acidic residues on the loop connecting domains C and D. This cave could electrostatically interact with the conserved lysine residues (i.e., Lys3, Lys7 and Lys12) of Arf6 in the N-terminal region, which is required for the interaction with Sec1027. In addition, the conserved positively charged patch (Fig. 5) located at the C-terminus of domain E potentially interacts with the negatively charged phosphoinositides in the membrane, in analogy to yeast Exo70, which interacts with PI(4,5)P2 and Rho3 via the C-terminal region19.

Discussion

To date, the N-terminal half structures of CATCHR subunits and their structurally related proteins have remained mostly unknown. The present zSec10 structure is the second near-full-length structure of the exocyst subunits determined so far. Yeast, mouse or thale cress Exo70 could be crystalized with small N- and C-terminal truncations, whereas the crystallization of zSec10 additionally required the truncation of the middle region. In this study, we combined disorder prediction and limited proteolysis to identify the middle region whose truncation could enhance the protein solubility and optimize the expression construct for crystallographic studies (Supplementary Table 1). It has been predicted that most of the CATCHR subunits might consist of similar helical architectures, where the N- and C-terminal half structural units are connected by the middle linker region22. Truncation of the middle region could be generally applied to crystallographic or other structural studies of other CATCHR subunits of near-full-length forms. For this strategy, we need to pay attention to maintaining the topology of the protein structure and intramolecular interaction, because shortening or deleting a flexible linker region may affect them in some cases42. zSec10195–708 (Δ385–394) retains ~75% of its unstructured middle region (residues 373–412), which ensures the conformational flexibilities of the N- and C-terminal halves of zSec10 for their interdomain interaction.

Previous studies suggest that subcomplexes of the exocyst complex exist in mammalian and/or yeast cells. On the other hand, a recent electron microscopy study suggests that most of the exocyst subunits exist as the components of the entire exocyst complex in yeast23. Amino acid sequences of the exocyst subunits are well conserved among metazoans (e.g., 36–84% identity between zSec10 and the Sec10 proteins from the representative metazoans shown in Fig. 2) but are somewhat different between fungi and metazoans (e.g., 22% identity between yeast Sec10 and zSec10). This difference may affect the electrostatic and/or hydrophobic properties of the molecular surface of each subunit: yeast and mouse Exo70 structures are similar but substantially differ in surface electrostatic potential18, as mentioned above. Such difference might be related to the difference in regulation of the full or partial assembly of the exocyst subunits between yeast and mammals. The present structure of zSec10 does not show a biased distribution of hydrophobicity (Supplementary Fig. 3A). This property implies a weak assembly with other exocyst subunits to form a subcomplex.

Side-by-side helix–helix interactions have been found between Tip20 and Dsl1 in the Dsl1 complex, and between the SNARE protein Tlg1 and the Vps51 subunit of the GARP complex33,43. Similarly, the critical residues involved in the direct interaction between Myo2 and Sec15 were located on the sides of α-helices44, suggesting their side-by-side interaction. It seems that the side-by-side helix–helix interaction commonly occurs for the assembly or interaction of the CATCHR subunits and their structurally related proteins. Recent electron microscopy studies have suggested that the subunits of the COG, GARP and HOPS complexes are arranged in antiparallel, whereas those of the exocyst complex are arranged roughly in parallel27,45,46. Some or many of the inter-subunit interactions might be mediated by the side-by-side helix–helix interactions. Sec10, Exo70 and M-Sec (Sec6 homolog) exhibit a straight rod shape, whereas Tip20 exhibits a hooked rod shape, as mentioned above. The overall shapes of the CATCHR subunits may be diverse, although the structural information of their N-terminal halves is mostly unavailable. However, three structures of the exocyst subunit and its homolog adopt a similar straight structure (Fig. 4), which might allow the parallel arrangement of the exocyst subunits. The hooked or other undetermined shape of the N-terminal half structure might mediate the antiparallel subunit arrangement in other CATCHR complexes.

In conclusion, the crystal structure of near-full-length Sec10 retains its conserved α-solenoid architecture, which has been found in other CATCHR subunits. This structure provides a basis for further studies on its possible function as an individual molecule and/or as a subunit of the exocyst complex, and on its potential interactions with other proteins including other exocyst subunits, small GTPase and/or SNARE proteins. In particular, the present zSec10 structure will be useful for the interpretation of high-resolution three-dimensional images of the entire exocyst complex, which is expected to be determined in the near future.

Materials and Methods

Sample preparation

The gene encoding zSec10195–708 (Δ385–394) was amplified by PCR and cloned into the pGEX-6P-1 expression vector (GE Healthcare), using BamHI and XhoI restriction sites to produce the N-terminally GST-fused protein. The protein was overproduced in E. coli Rosetta cells at 20 °C for 12–15 hours after induction with 0.1 mM isopropyl-β-D-thiogalactopyranoside (IPTG). The harvested cells were suspended in phosphate-buffered saline (PBS) containing 1 mM DTT and 0.1% Triton X-100 and lysed by sonication. The lysate was clarified by centrifugation and loaded onto a Glutathione Sepharose 4 Fast Flow column (GE Healthcare). The GST-fused protein was eluted with 50 mM Tris-HCl buffer (pH 8.0) containing 150 mM NaCl, 1 mM DTT and 15 mM reduced glutathione. The GST tag of the eluted protein was cleaved by PreScission protease (GE Healthcare). To remove the cleaved GST tag, protease and other minor impurities, the sample treated with protease was subjected to size-exclusion chromatography on a HiLoad 16/600 Superdex 200 column (GE Healthcare) with 10 mM Tris-HCl buffer (pH 7.5) containing 50 mM NaCl and 1 mM DTT. Finally, to completely remove the GST tag and GST-tagged protease, the sample was loaded onto a Glutathione Sepharose 4 Fast Flow column. The purified protein in the flowthrough fraction was collected and concentrated to 10 g L−1 using Amicon Ultra 15 (Millipore) for crystallization. The SeMet-substituted Sec10 was overexpressed in E. coli B834 cells at 20 °C for 24 hours after induction with 0.1 mM IPTG. The cells were grown in 200 mL culture supplemented with Core medium (Wako) containing all amino acids except methionine. Before induction with IPTG, 25 mg L−1 L-SeMet, 10 mg L−1 L-glucose and 250 mg L−1 MgSO4 were added. The SeMet-substituted zSec10195–708 (Δ385–394) was purified in the same manner as the native zSec10195–708 (Δ385–394).

Limited proteolysis

Trypsin was mixed with the Sec10 samples at a weight ratio of 1:100. The mixtures were incubated for 12–36 hours at 4 °C. The protease-treated samples were fractionated by size-exclusion chromatography using a Superdex200 10/300 GL column with 10 mM Tris-HCl buffer (pH 7.5) containing 50 mM NaCl and 1 mM DTT. The peak fractions were analyzed by SDS-PAGE with Coomassie brilliant blue staining. For N-terminal amino acid sequencing, the protein bands were transferred to PVDF membranes (Immobilon-P, Merck Millipore) and analyzed using an ABI Procise Model 492 peptide sequencer.

Crystallization

The native zSec10195–708 (Δ385–394) was crystallized at 20 °C by the hanging drop vapor diffusion method against a reservoir solution composed of 0.1 M HEPES-Na buffer (pH 7.5) and 0.57 M K Na tartrate after streak seeding with crushed native crystals as the seeds. The sample was mixed with the reservoir solution at a ratio of 1:1. The best rodlike crystals with dimensions of 0.25 × 0.05 × 0.05 mm3 appeared within 3–5 days. The seed crystals were obtained at 20 °C by the sitting drop vapor diffusion method against a reservoir solution composed of 0.1 M HEPES-Na buffer (pH 7.5) and 1 M K Na tartrate. The SeMet-substituted zSec10195–708 (Δ385–394) was crystallized against a reservoir solution composed of 0.1 M HEPES-Na buffer (pH 7.5) and 0.4 M K Na tartrate after streak seeding. The sample was mixed with the reservoir solution at a ratio of 1:0.6. The best SeMet-substituted protein crystals were grown with dimensions of 0.15 × 0.05 × 0.03 mm3. To increase the incorporation rate of SeMet, the crystallization process was repeated. The native crystals were used as the seeds for the first round of crystallization, and then the obtained SeMet-substituted protein crystals were used as the seeds for the second round.

Data collection and structure determination

The obtained crystals were soaked in a 1:2 mixture of the reservoir solution and the saturated Li2SO4 solution containing 0.2 M NaBr and flash frozen by plunging into liquid nitrogen. The diffraction data sets of the native and SeMet-substituted protein crystals were collected at beamline BL41XU of SPring-8 (Hyogo, Japan) and beamline BL-17A of Photon Factory (Tsukuba, Japan), respectively. All diffraction data were processed using HKL2000 (HKL Research)47 and the CCP4 program suite48. To solve the structure from the 3.11-Å-resolution SAD data sets collected from the SeMet-substituted protein crystals, the program Phenix was used for heavy-atom site search, phase calculation and density modification49. Eighteen Se sites were identified. Phase extension using the 2.74-Å-resolution native data set was performed for automatic model building using the program Buccaneer (CCP4 package) with higher accuracy50. On the basis of the initial atomic model and the identified Se sites, the complete model of zSec10195–708 (Δ385–394) except residues 378–384 and 395–402 was built using the program Coot51. The structure was refined using the program Phenix. The final addition of 2 water molecules and 10 Br atoms decreased Rfree. In the final model, 94.7 % of the residues are in the most favored regions and 5.3 % are in the additional allowed regions. Data collection, phasing and refinement statistics are shown in Table 1. Electrostatic surface potential was calculated using the program APBS tool52. Structure figures were generated using the program PyMol (Delano Scientific; http://www.pymol.org) or CueMol (CueMol: Molecular Visualization Framework; http://www.cuemol.org). The protein surface color-coded according to hydrophobicity was drawn using the Python script “Color_h.py” for PyMol (downloaded from http://us.expasy.org/tools/pscale/Hphob.Eisenberg.html)53. Multiple sequence alignment was performed using the program ClustalW at EMBL-EBI to generate the alignment file in the ClustalW format54. With this alignment file, the surface conservation was calculated using the ConSurf server55. The protein surface color-coded according to sequence conservation was drawn using the Python script “consurf_new.py” in PyMol. The multiple-sequence-alignment figure was generated using ESPript 3.056. The pairwise alignment of the structure of zSec10 with those of other CATCHR subunits and their structurally related proteins was performed using the Dali server35.

Additional Information

Accession codes: Coordinates and structure factors of zSec10195–708 (Δ385–394) have been deposited in the Protein Data Bank under accession code 5H11.

How to cite this article: Chen, J. et al. Crystal structure of Sec10, a subunit of the exocyst complex. Sci. Rep. 7, 40909; doi: 10.1038/srep40909 (2017).

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.