Abstract
Energy storage devices that can deliver high powers have many applications, including hybrid vehicles and renewable energy. Much research has focused on increasing the power output of lithium batteries by reducing lithium-ion diffusion distances, but outputs remain far below those of electrochemical capacitors and below the levels required for many applications. Here, we report an alternative approach based on the redox reactions of functional groups on the surfaces of carbon nanotubes. Layer-by-layer techniques are used to assemble an electrode that consists of additive-free, densely packed and functionalized multiwalled carbon nanotubes. The electrode, which is several micrometres thick, can store lithium up to a reversible gravimetric capacity of ∼200 mA h g−1electrode while also delivering 100 kW kgelectrode−1 of power and providing lifetimes in excess of thousands of cycles, both of which are comparable to electrochemical capacitor electrodes. A device using the nanotube electrode as the positive electrode and lithium titanium oxide as a negative electrode had a gravimetric energy ∼5 times higher than conventional electrochemical capacitors and power delivery ∼10 times higher than conventional lithium-ion batteries.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Simon, P. & Gogotsi, Y. Materials for electrochemical capacitors. Nature Mater. 7, 845–854 (2008).
Miller, J. R. & Simon, P. Materials science—electrochemical capacitors for energy management. Science 321, 651–652 (2008).
Amatucci, G. G., Badway, F., Du Pasquier, A. & Zheng, T. An asymmetric hybrid nonaqueous energy storage cell. J. Electrochem. Soc. 148, A930–A939 (2001).
Kang, B. & Ceder, G. Battery materials for ultrafast charging and discharging. Nature 458, 190–193 (2009).
Lee, Y. J. et al. Fabricating genetically engineered high-power lithium-ion batteries using multiple virus genes. Science 324, 1051–1055 (2009).
Nazar, L. F. et al. Nanostructured materials for energy storage. Int. J. Inorg. Mater. 3, 191–200 (2001).
Arico, A. S. et al. Nanostructured materials for advanced energy conversion and storage devices. Nature Mater. 4, 366–377 (2005).
Poizot, P. et al. Nano-sized transition-metaloxides as negative-electrode materials for lithium-ion batteries. Nature 407, 496–499 (2000).
Sides, C. R. et al. Nanoscale materials for lithium-ion batteries. MRS Bull. 27, 604–607 (2002).
Bruce, P. G., Scrosati, B. & Tarascon, J. M. Nanomaterials for rechargeable lithium batteries. Angew. Chem. Int. Ed. 47, 2930–2946 (2008).
Tarascon, J. M. & Armand, M. Issues and challenges facing rechargeable lithium batteries. Nature 414, 359–367 (2001).
Armand, M. & Tarascon, J. M. Building better batteries. Nature 451, 652–657 (2008).
Wu, X. L. et al. LiFePO4 nanoparticles embedded in a nanoporous carbon matrix: superior cathode material for electrochemical energy-storage devices. Adv. Mater. 21, 2710–2714 (2009).
Chmiola, J. et al. Anomalous increase in carbon capacitance at pore sizes less than 1 nanometer. Science 313, 1760–1763 (2006).
Hu, C. C., Chen, W. C. & Chang, K. H. How to achieve maximum utilization of hydrous ruthenium oxide for supercapacitors. J. Electrochem. Soc. 151, A281–A290 (2004).
Fischer, A. E. et al. Incorporation of homogeneous, nanoscale MnO2 within ultraporous carbon structures via self-limiting electroless deposition: implications for electrochemical capacitors. Nano Lett. 7, 281–286 (2007).
Reddy, A. L. M., Shaijumon, M. M., Gowda, S. R. & Ajayan, P. M. Coaxial MnO2/carbon nanotube array electrodes for high-performance lithium batteries. Nano Lett. 9, 1002–1006 (2009).
Kim, D. K. et al. Spinel LiMn2O4 nanorods as lithium ion battery cathodes. Nano Lett. 8, 3948–3952 (2008).
Bélanger, D., Brousse, T. & Long, J. W. Manganese oxides: battery materials make the leap to electrochemical capacitors. Electrochem. Soc. Interf. 17, 49–52 (2008).
Decher, G. Fuzzy nanoassemblies: toward layered polymeric multicomposites. Science 277, 1232–1237 (1997).
Xiang, H. F. et al. Effect of capacity matchup in the LiNi0.5Mn1.5O4/Li4Ti5O12 cells. J. Power Sources 183, 355–360 (2008).
Dudney, J. N. Thin film micro-batteries. Electrochem. Soc. Interf. 17, 44–48 (2008).
Lee, Seung Woo et al. Layer-by-layer assembly of all carbon nanotube ultrathin films for electrochemical applications. J. Am. Chem. Soc. 131, 671–679 (2009).
Niu, C. M. et al. High power electrochemical capacitors based on carbon nanotube electrodes. Appl. Phys. Lett. 70, 1480–1482 (1997).
Futaba, D. N. et al. Shape-engineerable and highly densely packed single-walled carbon nanotubes and their application as super-capacitor electrodes. Nature Mater. 5, 987–994 (2006).
Zielke, U., Huttinger, K. J. & Hoffman, W. P. Surface-oxidized carbon fibers: I. Surface structure and chemistry. Carbon 34, 983–998 (1996).
Kozlowski, C. & Sherwood, P. M. A. X-ray photoelectron-spectroscopic studies of carbon-fibre surfaces. Part 5. The effect of pH on surface oxidation. J. Chem. Soc. Farad. Trans. I 81, 2745–2756 (1985).
Frackowiak, E. et al. Electrochemical storage of lithium multiwalled carbon nanotubes. Carbon 37, 61–69 (1999).
Zhu, X. Y., Lee, S. M., Lee, Y. H. & Frauenheim, T. Adsorption and desorption of an O2 molecule on carbon nanotubes. Phys. Rev. Lett. 85, 2757–2760 (2000).
Burg, P. et al. The characterization of nitrogen-enriched activated carbons by IR, XPS and LSER methods. Carbon 40, 1521–1531 (2002).
Lota, G. et al. Effect of nitrogen in carbon electrodes on the supercapacitor performance. Chem. Phys. Lett. 404, 53–58 (2005).
Simon, P. & Burke, A. Nanostructured carbons: double-layer capacitance and more. Electrochem. Soc. Interf. 17, 38–43 (2008).
Chmiola, J., Yushin, G., Dash, R. & Gogotsi, Y. Effect of pore size and surface area of carbide derived carbons on specific capacitance. J. Power Sources 158, 765–772 (2006).
Le Gall, T., Reiman, K. H., Grossel, M. C. & Owen, J. R. Poly(2,5-dihydroxy-1,4-benzoquinone-3,6-methylene): a new organic polymer as positive electrode material for rechargeable lithium batteries. J. Power Sources 119, 316–320 (2003).
Chen, H. et al. From biomass to a renewable LixC6O6 organic electrode for sustainable Li-ion batteries. ChemSusChem 1, 348–355 (2008).
Ramanathan, T., Fisher, F. T., Ruoff, R. S. & Brinson, L. C. Amino-functionalized carbon nanotubes for binding to polymers and biological systems. Chem. Mater. 17, 1290–1295 (2005).
Ago, H. et al. Work functions and surface functional groups of multiwall carbon nanotubes. J. Phys. Chem. B 103, 8116–8121 (1999).
Naoi, K. & Simon, P. New materials and new configurations for advanced electrochemical capacitors. Electrochem. Soc. Interf. 17, 34–37 (2008).
Ma, S. B. et al. Electrochemical properties of manganese oxide coated onto carbon nanotubes for energy-storage applications. J. Power Sources 178, 483–489 (2008).
Fischer, A. E. et al. Electroless deposition of nanoscale MnO2 on ultraporous carbon nanoarchitectures: correlation of evolving pore–solid structure and electrochemical performance. J. Electrochem. Soc. 155, A246–A252 (2008).
Whittingham, M. S. Lithium batteries and cathode materials. Chem. Rev. 104, 4271–4301 (2004).
Kang, K. S. et al. Electrodes with high power and high capacity for rechargeable lithium batteries. Science 311, 977–980 (2006).
Chen, H. Y. et al. Lithium salt of tetrahydroxybenzoquinone: toward the development of a sustainable Li-ion battery. J. Am. Chem. Soc. 131, 8984–8988 (2009).
Frackowiak, E. & Beguin, F. Carbon materials for the electrochemical storage of energy in capacitors. Carbon 39, 937–950 (2001).
Krogman, K. C., Zacharia, N. S., Schroeder, S. & Hammond, P. T. Automated process for improved uniformity and versatility of layer-by-layer deposition. Langmuir 23, 3137–3141 (2007).
Han, X. Y. et al. Aromatic carbonyl derivative polymers as high-performance Li-ion storage materials. Adv. Mater. 19, 1616–1621 (2007).
Xiang, J. F. et al. A novel coordination polymer as positive electrode material for lithium ion battery. Cryst. Growth Des. 8, 280–282 (2008).
Acknowledgements
The authors acknowledge partial support from the Dupont–MIT Alliance for this project. Y.S.H. acknowledges support from the Office of Naval Research (N000140410400) and the MRSEC Program of the National Science Foundation (award no. DMR – 0819762). The assistance of E.L. Shaw in collecting XPS data, Y.T. Kim in carrying out surface functionalization of MWNTs, and Y.C. Lu in electrochemical measurements and XPS analysis is greatly appreciated. T. Kawaguchi is thanked for assistance with Li4Ti5O12 and LiNi0.5Mn1.5O4 synthesis and measurements. S.W.L. acknowledges a Samsung Scholarship from the Samsung Foundation of Culture, and B.M.G. acknowledges a graduate research fellowship from the National Science Foundation.
Author information
Authors and Affiliations
Contributions
Y.S.H., S.W.L., N.Y. and B.M.G. conceived and designed the experiments. S.W.L., B.S.K. and P.T.H. were involved with the methods of film assembly. S.C. carried out microscopy analysis. Y.S.H., S.W.L., N.Y. and B.M.G. co-wrote the manuscript, and P.T.H. edited the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary information
Supplementary information (PDF 2432 kb)
Rights and permissions
About this article
Cite this article
Lee, S., Yabuuchi, N., Gallant, B. et al. High-power lithium batteries from functionalized carbon-nanotube electrodes. Nature Nanotech 5, 531–537 (2010). https://doi.org/10.1038/nnano.2010.116
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nnano.2010.116
This article is cited by
-
Prospective utilization of boron nitride and beryllium oxide nanotubes for Na, Li, and K-ion batteries: a DFT-based analysis
Journal of Molecular Modeling (2023)
-
Porous polyhedral carbon matrix for high-performance Li/Na/K-ion battery anodes
Carbon Letters (2023)
-
High-performance organic pseudocapacitors via molecular contortion
Nature Materials (2021)
-
Green synthesis of graphite from CO2 without graphitization process of amorphous carbon
Nature Communications (2021)