Abstract
Explosive energy release is a common phenomenon occurring in magnetized plasma systems ranging from laboratories, Earth's magnetosphere, the solar corona and astrophysical environments. Its physical explanation is usually attributed to magnetic reconnection in a thin current sheet. Here we report the important role of magnetic flux rope structure, a volumetric current channel, in producing explosive events. The flux rope is observed as a hot channel before and during a solar eruption from the Atmospheric Imaging Assembly telescope on board the Solar Dynamic Observatory. It initially appears as a twisted and writhed sigmoidal structure with a temperature as high as 10 MK, and then transforms toward a semi-circular shape during a slow-rise phase, which is followed by fast acceleration and onset of a flare. The observations suggest that the instability of the magnetic flux rope triggers the eruption, thus making a major addition to the traditional magnetic-reconnection paradigm.
Similar content being viewed by others
Introduction
In contrast to a thin current sheet structure, a magnetic flux rope is a volumetric current channel with helical magnetic field lines wrapping around its centre axial field. Both structures can store a large amount of free magnetic energy in the current-carrying magnetic fields. Although it is generally believed that magnetic reconnection occurring in the current sheet releases magnetic energy producing various explosive phenomena1,2,3,4,5, the role of magnetic flux ropes in the explosive process is less studied and not well understood. Nevertheless, there is recently an increasing interest in flux ropes, especially when a realistic three-dimensional (3D) setting is considered. Laboratory experiments show that two parallel flux ropes can drive magnetic reconnection through magnetohydrodynamic attraction6. Large scale 3D numerical simulations have demonstrated that the magnetic reconnection layer is dominated by the formation and interaction of flux ropes7. It has been suggested that the observed episodic ejection of plasma blobs in many black hole systems is caused by the formation and ejection of flux ropes8.
In the research area of solar and heliospheric physics, the magnetic flux rope is considered to be a fundamental structure underlying the phenomenon of coronal mass ejections (CMEs), a well-known driver of space weather that may affect critical technological systems in space and on the ground. The first direct observational evidence of the presence of an isolated magnetic flux rope in the Sun–Earth system is from the near-Earth in situ solar wind observations of the so-called magnetic clouds9,10. Improved coronagraphic observations of CMEs from the Solar and Heliospheric Observatory showed that CMEs in the outer corona often contain a circular intensity pattern, suggesting the presence of a magnetic flux rope11. However, the detection of magnetic flux ropes in the lower corona before the CME formation has been elusive. In fact, one outstanding controversial issue in solar physics, both observationally and theoretically, has been when, where and how the magnetic flux rope is formed. The phenomenon of solar filaments has been interpreted as being due to magnetic flux ropes12,13, as well as the sigmoidal structures (either forward or reverse S-shaped) often seen in soft X-ray coronal images14,15,16. The origin of a pre-existing flux rope has been suggested to come directly from sub-photosphere emerging into the corona17, or alternatively from a sheared arcade in the corona through a flux-cancellation process18. However, other observers argue that the sigmoid geometry is of sheared field lines, instead of a flux rope, before an eruption19. In the sheared-arcade scenario, numerical simulations show that the magnetic reconnection in the corona could transform the sheared arcade into a flux rope20.
Here we report on unambiguous observational evidence of the presence of a flux rope before and during a solar eruption on 2011 March 8. The observation was made by the Atmospheric Imaging Assembly (AIA) telescope21 on board the Solar Dynamic Observatory. The AIA's unprecedented temporal cadence of 12 s, coupled with multi-temperature coronal extreme ultraviolet passbands, enables for the first time the clear observations of the detailed evolution of eruptive structures in the lower corona22,23,24,25. The flux rope initially appears as a twisted and writhed sigmoidal structure with a temperature as high as 10 MK. This hot channel then transforms toward a semi-circular shape during a slow rise phase. This phase is followed by the fast acceleration of the hot channel and the onset of an accompanying flare. These observations suggest that the macroscopic instability of the flux rope triggers the eruption, thus making a major addition to the traditional magnetic reconnection paradigm.
Results
Hot channel
The eruption originated from NOAA Active Region 11171 located at the heliographic coordinates ∼S21E72. The solar eruption produced an M1.5 class soft X-ray flare on Geostationary Operational Environment Satellite (GOES) scale and a CME with a terminal speed of ∼700 km s−1. The structural evolution of the eruption is shown in Fig. 1 and Supplementary Movies 1 and 2. The earliest signature of the hot channel started to appear at ∼03:31 UT (Universal Time), about 6 min before the onset of the flare. The hot channel only appeared in the AIA's two hottest coronal passbands (∼10 MK at 131 Å and ∼6.4 MK at 94 Å), but is completely absent in the cooler passbands (∼1.6 MK at 193 Å and ∼0.6 MK at 171 Å). The hot channel showed an interesting morphological evolution as it transformed itself from a sigmoidal shape (Fig. 1d,e) to a loop-like shape (Fig. 1f). The initial sigmoid had a twisted or writhed axis, with its two elbows close to the footpoints extending into the corona and the centre part dipping toward the surface. The dipped centre part then rose up becoming more linear. The continuing rise of the centre part eventually turned the channel into a loop-like shape, or partial torus. During this transformation process, the two footpoints of the evolving hot channel remained fixed.
We also carried out a kinematic analysis of the hot channel (Figs 2 and 3). The entire eruption process as seen by AIA can be divided into two distinct phases: a slow-rise phase before the flare onset and a fast acceleration phase after the flare onset. The slow-rise phase lasted for about 6 min from ∼03:31 to 03:37 UT. The hot channel started to appear in the beginning of this phase and then slowly and steadily rose up with an average velocity of ∼60 km s−1; at the end of this phase, the velocity increased to about ∼100 km s−1. This slow-rise phase was then followed by a much more energetic phase that was accompanied by multiple explosive signatures, including the fast acceleration of the hot channel, the formation of a cool compression front running ahead of the hot channel, the growth of a dark cavity, and a flare of electromagnetic radiation. It has been known that the onset of the fast acceleration phase of CMEs coincides well with the onset of accompanying flares26. However, the high cadence observations for this event show that the difference of the two onset times may be as small as 1 min (as indicated by the vertical line on the right in Figs 2 and 3). During the fast acceleration phase, the velocity of the hot channel increased from 100 to 700 km s−1, with an average acceleration about ∼1600 m s−2, which is at least ten times stronger than that in the slow-rise phase.
The bright but cool front of the eruption, best seen in AIA 171 Å (Figs 1c and 2b), is believed to be a compression front. It was apparently caused by the compression of the plasma surrounding the hot channel. The compression front only formed late in the fast acceleration phase. The magnetic structure of the active region presumably had two components: one internal core region composed of a flux rope, and one external enveloping region consisting of near-potential magnetic fields. The expansion of the envelope fields formed the bright front through compression. The expansion also explains the development of a dark cavity behind the compression front, as best seen in Fig. 1c, because of the rarefaction of the volume. The velocity of the compression front is always smaller than that of the hot channel throughout the fast acceleration phase (Fig. 3b), indicating that the eruption is mainly driven by the hot channel.
Flux rope
We conclude that the observed evolving hot channel is a magnetic flux rope. It is the coherent helical magnetic field lines that maintain the structure of the channel during the violent eruption process, even though its centre axis changes from a twisted sigmoidal shape to a semi-circular shape, and even though the structure undergoes an acceleration as strong as almost six times the solar surface gravitational acceleration (274 m s−2). The two ends of the flux rope remain anchored onto the photosphere, because of the line-tying effect. The observed morphological evolution resembles the result of the 3D numerical simulation of a magnetic flux rope16.
We further conclude that the magnetic flux rope has fully formed before the onset of the eruption. The onset of the eruption is clearly marked by the onset of the flare and the fast acceleration of the flux rope. The initial sigmoidal-shaped flux rope formed even before the slow-rise phase. Therefore, the flux rope should have formed during the period of the relative quiescent evolution of the source active region, which can last for days or weeks. It could also form through an interior dynamo process before its emergence to the surface.
Discussion
The observational result described above has serious theoretical implications. It makes a major addition to the standard paradigm of eruptive flares, the so-called CSHKP model27,28,29,30. The CSHKP model and its many variants assume that the current-sheet magnetic configuration is of primary importance; the magnetic reconnection in the current sheet releases the magnetic energy that produces flare emission, flare ribbons and post-flare loop arcades. Nevertheless, the standard model does not explicitly address the trigger of the eruption. Our work provides strong evidence that the trigger is the instability of a pre-existing flux rope. The reconnecting current sheet is likely formed underneath the rising flux rope through the upward stretching of surrounding magnetic fields. One such mechanism of triggering is the so-called torus instability31,32, an ideal magnetohydrodynamic process responsible for the loss of equilibrium of a toroidal current ring. In the torus instability model, a critical vertical gradient of the external magnetic field determines the instability. The appearance of the instability should mark the separation between the slow-rise phase and the fast acceleration phase, corresponding to the onset of the eruption. The fast-rising motion of the flux rope may create a current sheet underneath and drive plasma inflow toward the current sheet, resulting in fast magnetic reconnection. In this scenario, the occurrence of fast magnetic reconnection is not spontaneous; instead, it is driven by the macroscopic motion of a magnetic flux rope. Our result suggests magnetic flux ropes have an important role in triggering and driving the explosive energy release process in solar eruptions, and possibly in many other plasma systems in space and laboratories.
Methods
Data and observations
The AIA instrument on the Solar Dynamic Observatory provides the essential observations of the flux rope. The AIA instrument has ten passbands, six of which are sensitive to coronal temperatures mainly contributed from emissions of specific spectral lines. The six coronal passbands, in the order of decreasing temperature, are 131 Å (Fe XXI, ∼10 MK), 94 Å (Fe XVIII, ∼6.4 MK), 335 Å (Fe XVI, ∼2.5 MK), 211 Å (Fe XIV, ∼2.0 MK), 193 Å (Fe XII, ∼1.6 MK), and 171 Å (Fe IX, ∼0.6 MK), respectively. Each AIA image has 4096×4096 pixels (0.6″ pixel size, 1.5″ spatial resolution) covering the full disk of the Sun and up to 0.5 R⊙ above the limb. The observational cadence of the AIA is one image every 12 s at each passband. The AIA images shown in this paper (Fig. 1 and Supplementary Movies 1 and 2) are a small portion of the original full size images.
The X-ray data of the flare, as shown in Fig. 3, are from two instruments. The soft X-ray data are from the GOES that provides the integrated full-disk soft X-ray emission from the Sun. The GOES soft X-ray data have been historically used to characterize the magnitude, onset time and peak time of solar flares. The hard X-ray data are from the Reuven Ramaty High Energy Solar Spectroscopic Imager spacecraft.
Kinematic analysis
The kinematic information of the hot channel and the compression front, as shown in Fig. 3, is obtained by analysing AIA images. We visually inspect the images and identify the leading edges of these features. The heights are measured from the projected distance of the leading edges from the initial position of the hot channel. The measurement of the hot channel is made on AIA 131 Å images, whereas that of the compression front is on AIA 171 Å images. The uncertainty of the height measurement is about four pixels, or 2 Mm, which is much smaller than the size of the height symbols used in Fig. 3. On the basis of the height–time measurements, the velocities are then derived from the numerical derivative method that uses Lagrangian interpolation of three neighbouring points. To reduce the uncertainty of the derived velocities, the height points are smoothed using a cubic spline interpolation method. The derived velocity uncertainty is about 30 km s−1. As shown in Fig. 3, the velocity error bars are about the same size as the symbols, except for the edge points.
Additional information
How to cite this article: Zhang, J. et al. Observation of an evolving magnetic flux rope before and during a solar eruption. Nat. Commun. 3:747 doi: 10.1038/ncomms1753 (2012).
Change history
07 June 2016
The HTML version of this Article previously published omitted Supplementary Movie 2. This has now been corrected in the HTML version of the Article; the PDF was correct from the time of publication.
References
Parker, E. N. Sweet's mechanism for merging magnetic fields in conducting fluids. J. Geophys. Res. 62, 509–520 (1957).
Sweet, P. A. in Electromag. Phen. Cosmic. Phys. IAU Symp. No. 6 (ed. Lehnert, B.) 123 (Cambridge Univ. Press, 1958).
Yamada, M. Review of controlled laboratory experiments on physics of magnetic reconnection. J. Geophys. Res. 104, 14529–14541 (1999).
Priest, E. R. & Forbes, T. Magnetic Reconnection, Cambridge Univ. Press, 2000.
Kulsrud, R. M. Plasma Physics for Astrophysics, Princeton Univ. Press, 2005.
Intrator, T. P., Sun, X., Lapenta, G., Dorf, L. & Furno, I. Experimental onset threshold and magnetic pressure pile-up for 3D reconnection. Nature Phys. 5, 521–526 (2009).
Daughton, W. et al. Role of electron physics in the development of turbulent magnetic reconnection in collisionless plasmas. Nature Phys. 7, 539–542 (2011).
Yuan, F., Lin, J., Wu, K. & Ho, L. C. A magnetohydrodynamical model for the formation of episodic jets. Mon. Not. R. Astron. Soc. 395, 2183–2188 (2009).
Burlaga, L., Sittler, E., Mariani, F. & Schwenn, R. Magnetic loop behind an interplanetary shock: Voyager, Helios, and IMP 8 observations. J. Geophys. Res. 86, 6673–6684 (1981).
Lepping, R. P., Jones, J. A. & Burlaga, L. F. Magnetic field structure of interplanetary magnetic cloud at 1 AU. J. Geophys. Res. 95, 11957–11965 (1990).
Dere, K. P., Brueckner, G. E., Howard, R. A., Michels, D. J. & Delaboudiniere, J. P. LASCO and EIT observations of helical structure in coronal mass ejections. Astrophys. J. 516, 465 (1999).
Rust, D. M. & Kumar, A. Helical magnetic fields in filaments. Solar Phys. 155, 69–97 (1994).
Kumar, P., Srivastava, A. K., Filippov, F., Erdélyi, R. & Uddin, W. Multiwavelength observations of a failed flux rope in the eruption and associated M-class flare from NOAA AR 11045. Solar Phys. 272, 301–317 (2011).
Titov, V. S. & Démoulin, P. Basic topology of twisted magnetic configurations in solar flare. Astron. Astrophys. 351, 707–720 (1999).
McKenzie, D. E. & Canfield, R. C. Hinode XRT observations of a long-lasting coronal sigmoid. Astron. Astrophys. 481, L65–L68 (2008).
Aulanier, G., Török, T., Démoulin, P. & DeLuca, E. E. Formation of torus-unstable flux ropes and electric currents in erupting sigmoids. Astrophys. J. 708, 314–333 (2010).
Gibson, S. E. et al. The structure and evolution of a sigmoidal active region. Astrophys. J. 574, 1021–1038 (2002).
Green, L. M. & Kliem, B. Flux rope formation preceding coronal mass ejection onset. Astrophys. J. 700, L83–L87 (2009).
Moore, R. L., Sterling, A. C., Hudson, H. S. & Lemen, J. R. Onset of the magnetic explosion in solar flares and coronal mass ejections. Astrophys. J. 552, 833–848 (2001).
Antiochos, S. K., DeVore, C. R. & Klimchuk, J. A. A model for solar coronal mass ejection. Astrophys. J. 510, 485–493 (1999).
Lemen, J. R. et al. The Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO). Solar Phys. 275, 17–40 (2011).
Liu, R., Liu, C., Wang, S., Deng, N. & Wang, H. Sigmoid-to-flux-rope transition leading to a loop-like coronal mass ejection. Astrophys. J. 725, L84–L90 (2010).
Cheng, X., Zhang, J., Liu, Y. & Ding, M. Observing flux rope formation during the impulsive phase of a solar eruption. Astrophys. J. 732, L25 (2011).
Schrijver, C. J., Aulanier, G., Title, A. M., Pariat, E. & Delannee, C. The 2011 February 15 X2 flare, ribbons, coronal front, and mass ejection: interpreting the three-dimensional views from the Solar Dynamic Observatory and STEREO guided by magnetohydrodynamic flux rope modeling. Astrophys. J. 738, 167 (2011).
Zharkov, S., Green, L. M., Matthews, S. A. & Zharkova, V. V. 2011 February 15: sunquakes produced by flux rope eruption. Astrophys. J. 741, L35 (2011).
Zhang, J., Dere, K. P., Howard, R. A., Kundu, M. R. & White, S. M. On the temporal relationship between coronal mass ejections and flares. Astrophys. J. 559, 452–462 (2001).
Carmichael, H. in Phys. Solar Flares Proc. AAS-NASA Symp. (ed. Hess, W. N.) 451 (National Aeronautics and Space Administration, 1964).
Sturrock, P. A. A model of solar flares in Struct Dev Solar Active Regions IAU Symp. No.35 (ed Kiepenheur, K.O.) 471 (Dordrecht, D. Reidel, 1968).
Hirayama, T. Theoretical model of flares and prominences. Solar Phys. 34, 323–338 (1974).
Kopp, R. A. & Pneuman, G. W. Magnetic reconnection in the corona and the loop prominence phenomenon. Solar Phys. 50, 85–98 (1976).
Kliem, B. & Török, T. Torus instability. Phys. Rev. Lett. 96, 255002 (2006).
Olmedo, O. & Zhang, J. Partial torus instability. Astrophys. J. 718, 433–440 (2010).
Acknowledgements
SDO is a mission of NASA's Living With a Star Program. J. Z. is supported by NSF Grant ATM-0748003 and NASA Grant NNX07AO72G. X. C. and M. D. are supported by NSFC under Grants 10828306 and 10933003, and NKBRSF under grant 2011CB811402. X. C. is also supported by the scholarship granted by the China Scholarship Council (CSC) under file number 2010619071.
Author information
Authors and Affiliations
Contributions
J. Z. developed the idea and led the discussion. X. C. carried out the data analysis. M. D. contributed to discussion. All authors wrote the paper.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Movie 1
Movie of the solar eruption on 2011 March 8. The movie shows the sequences of AIA 131 Å hot coronal images (left) and AIA 171 Å cool coronal images (right). The hot channel (or the flux rope) is clearly seen in the images on the left but is completely absent in the images on the right. The images shown are base-difference images (the base images were taken at 03:10 UT). The top panel shows the GOES soft X-ray 1-8 Å flux profile. The two vertical dashed lines in the profile indicate the start time of the slow rise phase of the hot channel and the onset time of the flare, respectively. (MPG 5976 kb)
Supplementary Movie 2
Movie of the solar eruption on 2011 March 8 in six coronal temperatures. All six coronal passband images from AIA are shown in this movie. The six passbands, in the order of decreasing temperatures, are 131 Å (Fe XXI, ∼10 MK), 94 Å (Fe XVIII, ∼6.4 MK), 335 Å (Fe XVI, ∼2.5 MK), 211 Å (Fe XIV, ∼2.0 MK), 193 Å (Fe XII, ∼1.6 MK) and 171 Å (Fe IX, ∼0.6 MK), respectively. The images shown are base-difference images (the base images are taken at 03:10 UT). (MPG 7985 kb)
Rights and permissions
About this article
Cite this article
Zhang, J., Cheng, X. & Ding, Md. Observation of an evolving magnetic flux rope before and during a solar eruption. Nat Commun 3, 747 (2012). https://doi.org/10.1038/ncomms1753
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms1753
This article is cited by
-
Solar-Filament Detection and Classification Based on Deep Learning
Solar Physics (2022)
-
Solar Filament Segmentation Based on Improved U-Nets
Solar Physics (2021)
-
Database management system of hundred-year solar filament image archives
Journal of Astrophysics and Astronomy (2021)
-
Decoding the Pre-Eruptive Magnetic Field Configurations of Coronal Mass Ejections
Space Science Reviews (2020)
-
Identification of Pre-flare Processes and Their Possible Role in Driving a Large-scale Flux Rope Eruption with Complex M-class Flare in the Active Region NOAA 12371
Solar Physics (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.