Vinculin controls talin engagement with the actomyosin machinery

Atherton, Paul; Stutchbury, Ben; Wang, De-Yao; Jethwa, Devina; Tsang, Ricky; Meiler-Rodriguez, Eugenia; Wang, Pengbo; Bate, Neil; Zent, Roy; Barsukov, Igor L.; Goult, Benjamin T.; Critchley, David R.; Ballestrem, Christoph

doi:10.1038/ncomms10038

Download PDF

Article
Open access
Published: 04 December 2015

Vinculin controls talin engagement with the actomyosin machinery

Paul Atherton¹^na1,
Ben Stutchbury¹^na1,
De-Yao Wang¹^na1,
Devina Jethwa¹,
Ricky Tsang¹,
Eugenia Meiler-Rodriguez²,
Pengbo Wang¹,
Neil Bate³,
Roy Zent⁴,
Igor L. Barsukov⁵,
Benjamin T. Goult⁶,
David R. Critchley³ &
…
Christoph Ballestrem¹

Nature Communications volume 6, Article number: 10038 (2015) Cite this article

10k Accesses
137 Citations
17 Altmetric
Metrics details

Subjects

Abstract

The link between extracellular-matrix-bound integrins and intracellular F-actin is essential for cell spreading and migration. Here, we demonstrate how the actin-binding proteins talin and vinculin cooperate to provide this link. By expressing structure-based talin mutants in talin null cells, we show that while the C-terminal actin-binding site (ABS3) in talin is required for adhesion complex assembly, the central ABS2 is essential for focal adhesion (FA) maturation. Thus, although ABS2 mutants support cell spreading, the cells lack FAs, fail to polarize and exert reduced force on the surrounding matrix. ABS2 is inhibited by the preceding mechanosensitive vinculin-binding R3 domain, and deletion of R2R3 or expression of constitutively active vinculin generates stable force-independent FAs, although cell polarity is compromised. Our data suggest a model whereby force acting on integrin-talin complexes via ABS3 promotes R3 unfolding and vinculin binding, activating ABS2 and locking talin into an actin-binding configuration that stabilizes FAs.

Allosteric activation of vinculin by talin

Article Open access 18 July 2023

Talin dissociates from RIAM and associates to vinculin sequentially in response to the actomyosin force

Article Open access 19 June 2020

Focal adhesions contain three specialized actin nanoscale layers

Article Open access 21 March 2024

Introduction

Cell motility is central to the development and homeostasis of multicellular organisms, and defining the mechanisms involved will inform strategies to modulate aberrant cell migration and promote tissue regeneration. Cell migration involves the cyclical attachment and detachment of the integrin family of adhesion molecules to extracellular matrix (ECM), as well as the generation of force required to translocate the cell body. Such events occur in focal adhesions (FA), dynamic macromolecular complexes in which integrins are linked via cytoplasmic adhesion plaque proteins to the actomyosin contractile machinery^1,2,3. Two plaque proteins that are key to this link are the interacting actin-binding proteins talin and vinculin. Cells depleted of talin cannot maintain cell spreading⁴, while cells without vinculin have smaller more dynamic FAs^1,2,3,5,6 and are compromised in coupling plaque proteins to F-actin^4,7,8.

Structurally, talin consists of an atypical N-terminal FERM-domain (talin head) that binds integrins, PIP2 and F-actin (actin-binding site 1; ABS1) linked to a C-terminal flexible rod consisting of 13 alpha-helical bundles (R1-R13) terminating in a dimerization motif (Fig. 1a)⁹. The rod contains binding sites for the Rap1-interactor RIAM^10,11, vinculin¹² and integrins¹³ plus two additional regions that bind F-actin (ABS2 and ABS3)^1,2,3,14. Binding of the talin head to integrins regulates their affinity for ECM^4,15, while talin binding to actin is thought to form the primary link to the force-transmitting machinery^4,5,6,9. Vinculin, which binds talin via its globular N-terminal head and F-actin via its C-terminal tail, acts as a molecular clutch, reinforcing the link between talin and actomyosin^7,8,10,16,17. Moreover, vinculin binding to talin maintains integrins in an active conformation^9,11,16, stabilizing the entire FA structure containing a large number of signalling components^10,11,16. However, expression of constitutively active vinculin compromises cell polarity and directional cell migration^12,16. Thus, co-ordinated cell migration requires that the activity of talin and vinculin are precisely controlled, but the mechanisms that regulate assembly of the talin/vinculin complex and its interaction with the cellular force machinery remain to be explored.

**Figure 1: Talin rod domains regulate cell polarity and migration, FA morphology and FA composition.**

The activity of talin and vinculin is regulated by conformational changes at several levels. In both cases, the N-terminal head domains interact with the C-terminal regions of the proteins resulting in an autoinhibited state^7,8,9,18. Despite evidence that activation involves either chemical signals (binding to activating proteins or lipids) and/or physical force^9,10,19, the detailed mechanisms underlying activation have not been elucidated. In addition, structural and biochemical studies on talin show that the vinculin binding sites (VBSs) within the helical bundles that make up the talin rod are cryptic^{12,14,20,21,22}, and single molecule experiments^9,23,24,25 indicate that force-induced unfolding of the bundles is required to unmask the VBSs. Thus, it is hypothesised that force-induced conformational changes in talin lead to the recruitment of vinculin and the stabilization of FAs. However, to what extent such mechanisms operate in cells is unclear.

Structure–function studies on talin have been hampered by the fact that (i) most cell types express two structurally and functionally related talin isoforms^26,27, (ii) knockout or knockdown of talin1 leads to upregulation of talin2⁴ and (iii) knockdown leaves residual talin^4,28, complicating the interpretation of results.

Here, we use newly derived talin1 and talin2 knockout (TKO) cells that grow in suspension, and only adhere to ECM, spread and assemble FAs following expression of functional talin constructs. By reconstituting TKO cells with structure-based talin point and deletion mutants, we define the role of specific talin and vinculin domains in engaging the actomyosin machinery, the assembly and stability of FAs, and the establishment of cell polarity. We demonstrate that vinculin binding within domains R2R3 acts to ‘unlock’ ABS2 of talin, and that this is regulated either by prior activation of vinculin, or by the application of force across talin provided by actin-binding to ABS3. These findings demonstrate how talin, vinculin and actin interact with one another to form the major mechanosensory module of the FA.

Results

Talin regulates FA size and cell polarity

To investigate how the 11 potential VBSs in the talin rod¹² contribute to FA formation, we deleted rod domains containing either 4 (talΔR4-R10) or 9 (talΔR1-R10) of the VBSs (Fig. 1a; Supplementary Fig. 1b). These constructs were tagged with GFP and expressed in TKO cells, which lack endogenous talin (Supplementary Fig. 1a) and do not adhere to ECM and do not spread (Fig. 1b; Supplementary Movie 1)⁴. Expression of GFP-tagged full-length talin (talinFL) rescued integrin activation (Supplementary Fig. 1c), cell adhesion, spreading and FA formation (Fig. 1b,c), and cells displayed both small peripheral adhesions and mature FAs connected to prominent actin stress fibres. In contrast, although the talin rod deletion mutants rescued integrin activation and spreading, the cells lacked large FAs (Fig. 1c; Supplementary Fig. 1c). TalΔR1-R10 cells displayed mostly small peripheral adhesions, and while talΔR4-R10 cells assembled slightly larger structures (Fig. 1d), both generally lacked actin stress fibres, although adhesions were connected to thin actin filaments (Fig. 1c; Supplementary Fig. 2a,b). Moreover, cells expressing these mutants were largely unpolarized (Fig. 1e), and cell motility was reduced compared with talinFL cells (Fig. 1f); cell polarization is a prerequisite for directional migration.

Vinculin, which binds talin and actin, is important for full engagement of adhesion complexes with the force machinery^8,16. Thus, the small peripheral adhesions exhibited by talΔR1-R10 and talΔR4-R10 cells might result from reduced vinculin-binding. Indeed, we observed a twofold reduction in the vinculin/talin ratio in talΔR4-R10 cells, and a fivefold reduction in talΔR1-R10 cells compared with talinFL cells (Fig. 1g,h). We conclude that both talin R1-R3 and R4-R10 contain functional VBSs that recruit vinculin to FAs. The presence of vinculin in talin ΔR1-R10 adhesions likely indicates that the two VBSs in R11-R13 are also functional, as proposed by others^28,29.

Talin domains R1-R3 contain key vinculin binding sites

Inhibition of actomyosin-mediated tension with Rho Kinase (ROCK) or myosin inhibitors normally results in FA disassembly¹⁶. By binding to talin, constitutively active full-length vinculin (vinT12) stabilises FAs which become insensitive to such drugs^7,16. To investigate which talin rod domains are key to this effect, talinFL or the talin deletion mutants were co-expressed with either full-length vinculin (vinFL) or vinT12, and the cells treated with Y-27632. As the talin deletion mutants do not support FA maturation in TKO cells, we used NIH3T3 cells for these experiments (endogenous talin supports FA formation which become GFP-talin positive; Supplementary Fig. 3a). As expected, Y-27632 reduced the size of GFP-talinFL positive FAs while vinT12 stabilized FAs (Fig. 2a). The intensity of GFP-talinFL in FAs also decreased more than in cells co-expressing vinT12 (Supplementary Fig. 4a). Interestingly, while vinT12 also stabilized talΔR4-R10 in FAs to a significant degree, it had no effect on talΔR1-R10 (Fig. 2a and Supplementary Fig. 4a), suggesting that binding of vinculin to the R1-R3 region of the talin rod is particularly important for adhesion stability.

**Figure 2: Vinculin regulates talin by binding to R1-R3 domains.**

Vinculin-induced FA stabilization goes alongside reduced talin turnover^7,30. To investigate the turnover of talinFL and the deletion mutants, we used talin constructs tagged with photoactivatable-GFP (PAGFP) and assessed fluorescence loss after photoactivation (FLAP; for details see Supplementary Fig. 3b and Supplementary Movie 2). The results showed that the rates of turnover of talΔR4-R10 and talΔR1-R10 were significantly faster than talinFL (Fig. 2b,c; Supplementary Fig. 3c; Supplementary Movie 3). Co-expressing vinT12 significantly decreased turnover of talinFL, and to some extent talΔR4-R10, but not the talΔR1-R10 mutant (Fig. 2b,c; Supplementary Fig. 3c). These results were confirmed using FRAP (Supplementary Fig. 3d). To establish that the inhibitory effect of vinT12 on talin dynamics was due to a direct interaction, we used a vinT12^A50I mutant with reduced talin binding. This construct had no effect on talinFL turnover as assessed by FLAP (Supplementary Fig. 3e and Supplementary Movie 4). These results clearly indicate that binding of active vinculin to the R1-R3 region of the talin rod plays an important role in stabilizing FAs.

ΔR2R3 suppresses FA dynamics independently of vinculin

Four out of the five VBSs in talin R1-R3 are in R2R3 (Fig. 1a). We therefore expected that TKO cells expressing a talΔR2R3 construct (Fig. 3a) would have smaller and less stable FAs. To our surprise, they were even larger than FAs in talinFL cells, although the cells were more rounded (Fig. 3b,c). All FAs in talΔR2R3 cells were linked to prominent actin stress fibres (Fig. 3b), and strikingly, the FAs remained stable when treated with Y-27632 (Fig. 3d and Supplementary Fig. 4b). Comparable results were seen in NIH3T3 cells (Supplementary Fig. 4c). Co-expression of vinT12 with talΔR2R3 caused no further increase in FA stability (Supplementary Fig. 4d). Moreover, FLAP experiments showed that talΔR2R3 turnover was greatly diminished compared with talinFL (Fig. 3e and Supplementary Movie 5). As expected, FAs in talΔR2R3 cells had a significantly reduced vinculin to talin ratio compared with control cells (Fig. 3f and Supplementary Fig. 5). Furthermore, talΔR2R3 exhibited reduced turnover even when expressed in vinculin null cells (Fig. 3g). Clearly, the stabilizing effect induced by deleting talin R2R3 is vinculin independent.

**Figure 3: Deletion of Talin R2R3 stabilises FAs.**

A role for talin ABS2 in FA dynamics

One possibility is that deletion of R2R3 may activate the adjacent actin-binding site (ABS2) originally mapped to residues 951–1327 (ref. 14) (roughly equivalent to R4-R6). However, R7R8 has also now been shown to bind F-actin²¹. To map ABS2 more precisely, we expressed several new talin rod fragments designed according to domain boundaries. Talin R4-R8 co-sedimented with F-actin (Fig. 4a) to about the same extent as ABS1 in the talin head and ABS3 in the C-terminal R13 rod domain. Interestingly, R1-R3 and R9-R12 also co-sedimented with F-actin, though to a lesser degree, indicating that like filamin³¹, talin interacts with actin at several sites distributed along the length of the molecule.

**Figure 4: ABS2 is a key regulator of talin.**

To explore the possibility that domains flanking ABS2 might influence its activity, we designed ABS2 constructs containing the adjacent R3 and R9 domains. Interestingly, inclusion of these domains either together (R3-R9) or individually (R4-R9 or R3-R8) actually reduced actin binding to ABS2 (Fig. 4b). These results indicate that domains flanking ABS2 suppress its activity, and suggest that conformational changes in these domains have the potential to activate ABS2.

To identify the major actin binding determinants in R4-R8, we examined the ability of individual domains to bind F-actin (Fig. 4c). Both R4 and the R7R8 double domain bound F-actin (the latter is consistent with previous results²¹). In contrast, R5 and R6 bound only weakly if at all to F-actin, and previous studies have shown that R7 alone does not bind actin²¹. The results indicate that R4 and R8 are the key determinants of ABS2, and perhaps bind cooperatively to F-actin. Both domains have anomalously high pI values (9.5 and 7.8, respectively) compared with an average pI of 5.4 for the talin rod, and will be positively charged at physiological pH as required for binding to the negatively charged surface of F-actin. High pI values are also observed for ABS1 and ABS3 (Supplementary Fig. 6).

Analysis of the distribution of conserved positively charged and hydrophobic amino acids in the R4 and R8 domain structures highlights a number of residues that may contribute to actin binding. By serially mutating these residues (Fig. 4d), a R4-R8 construct with reduced ability to bind F-actin (∼60% inhibition) was generated (B.Goult and M.Schwartz personal communication). A GFP-tagged talinFL^ABS2mut containing these mutations rescued cell spreading in TKO cells, but the FAs were smaller and the number of actin stress fibres markedly reduced compared with talinFL cells (Fig. 4e; for quantification Supplementary Fig. 7). Furthermore, FLAP experiments showed that turnover of talinFL^ABS2mut was significantly faster than talinFL and similar results were obtained by deleting the R8 domain (Fig. 4f and Supplementary Movie 7, Supplementary Fig. 7c and Supplementary Movie 6). Both talinFL and talinFL^ABS2mut were stabilized by co-expression of vinT12; however, it had a less pronounced effect on talinFL^ABS2mut. Thus, ABS2 is an important factor determining talin turnover in FAs.

ABS2-actin and vinculin-actin regulate talin dynamics

To test whether the stabilizing effects of talΔR2R3 are dependent on ABS2, we expressed a talΔR2R3^ABS2mut mutant in TKO cells. The construct rescued cell spreading, but the cells had much smaller FAs and lacked the prominent F-actin stress fibres seen with the talΔR2R3 construct (Fig. 5a). Furthermore, using FLAP, we found that the talΔR2R3^ABS2mut had a significantly faster turnover than talΔR2R3 (Fig. 5b and Supplementary Movie 8) demonstrating that the stabilizing effects of talΔR2R3 are indeed partly mediated through ABS2.

**Figure 5: Talin R2R3 regulate the availability of ABS2 for actin binding.**

An additional factor influencing FA dynamics, migration and traction force is the ability of vinculin to bind actin via its C-terminal tail^32,33. To establish whether this is also a factor regulating talinFL turnover, we used a vinT12^I997A mutant with reduced actin-binding and bundling activity⁸. The vinT12^I997A construct still produced a significant reduction in the turnover of talinFL, but the reduction was not as great as with vinT12 (Fig. 5c and Supplementary Movie 9). Altogether, these experiments strongly suggest that actin binding to talin ABS2 contributes to FA stabilization, and that this is regulated by vinculin binding to R2R3. However, the ability of vinculin to bind directly to both talin and F-actin also plays a significant role.

Talin-actin link is required for traction force generation

The link between the adhesion plaque and actomyosin is essential to generate the forces required for cell migration. To investigate the role of talin in this process, we used TKO cells expressing various talin mutants, and traction force microscopy to examine force transmission to substrate. The largest traction stresses detected were at the cell periphery, where the majority of adhesion complexes are localized (Fig. 6). Highest traction stresses were observed in talinFL and talΔR2R3 cells, while cells expressing talin ABS2 deletion or point mutants exhibited significantly reduced force transmission (Fig. 6a,b). Quantification showed that cells expressing talΔR2R3 were able to exert similar forces on the ECM to cells expressing talinFL (Fig. 6a,b). In contrast, cells expressing talΔR4-R10 or talΔR1-R10, which lack ABS2 and several VBSs, showed a 45 and 55% reduction respectively in the force transmitted to ECM (Fig. 6a,b). Similarly, TKO cells expressing talinFL^ABS2mut displayed a 50% weaker force exertion than cells expressing talinFL (Fig. 6c). These data clearly demonstrate that ABS2 plays a key role in actomyosin-mediated force transmission.

**Figure 6: The link between talin ABS2 and F-actin is critical for force exertion.**

Talin ABS3 is required for FA initiation and cell spreading

While the above experiments demonstrate a key role for ABS2 in FA maturation and engagement with the actomyosin machinery, the role of ABS3 has remained unclear. One hypothesis, largely derived from in vitro experiments, is that ABS3 might support the initial force transduction that is required to unravel the R2R3 helical bundles, and promote vinculin binding. If this were the case, one would expect that abolishing actin binding to ABS3 would result in a failure to form stable adhesions. To test this hypothesis, we used a talinFL^KVK/DDD mutation that reduces actin binding to ABS3 by >70%, without affecting dimerization which is essential for actin binding²². Interestingly, while the GFP-tagged talinFL^KVK/DDD mutant rescued TKO cell spreading, ∼45% of cells lacked FAs (Fig. 7a,b). Moreover, in the majority of cells, GFP-talinFL^KVK/DDD showed a diffuse cytoplasmic distribution with no clear localization to actin filaments, unlike constructs with an intact ABS3. These experiments suggest that F-actin binding to ABS3 supports the force required for the initial events leading to FA formation.

**Figure 7: The role of talin ABS3 in FA assembly can be bypassed by active vinculin.**

However, about half of talinFL^KVK/DDD cells contained some FAs (Fig. 7a,b). These cells exerted weaker traction forces, migrated slower and contained less vinculin in FAs compared with cells expressing talinFL (Supplementary Fig. 8). However, the fact that they had clearly visible FAs suggested that FA initiation via ABS3 can be bypassed. We therefore tested whether activated vinculin, which in turn activates ABS2, and can itself bind directly to F-actin, might bypass ABS3. Indeed, we found that co-expression of vinT12 with the talinFL^KVK/DDD mutant was able to fully rescue FA formation, unlike co-expression of vinT12^A50I (Fig. 7a,b). Together, our data demonstrate that ABS3 plays a key role in the initiation of FA assembly, but that its role can be bypassed by pathways that activate vinculin and allow the association between vinculin and talin.

Discussion

The development of FAs involves (i) formation of small, dot-like nascent adhesions independent of actomyosin-mediated tension and (ii) their tension-dependent maturation into FAs^34,35,36. Talin is seen early in adhesion complex assembly³⁷, binds and activates integrins^38,39 and regulates the recruitment of other proteins including vinculin, paxillin and FAK to FAs^4,28,40. Using TKO cells, we demonstrate that talin is indeed essential for integrin activation, cell adhesion and spreading, and is at the core of adhesion complex assembly, the regulation of adhesion strength and engagement with actin.

TKO cells expressing a talin ABS3 mutant (talinFL^KVK/DDD)²² exhibit a marked reduction in assembly of adhesion clusters suggesting that in the absence of ABS3-mediated coupling to actomyosin, the force-dependent conformational changes in talin required to expose cryptic VBSs and to activate ABS2 are inoperative. As a result, adhesion complexes that do form are unstable. ABS3 may also be involved in the correct localization of talin, bringing it into position to bind and activate integrins and initiate adhesion complex assembly⁴¹. Such a model is suggested by our finding that the talinFL^KVK/DDD mutant showed little enrichment in actin-rich lamellipodia (Fig. 7a) compared with constructs with an intact ABS3 (Fig. 1c). However, the role of talin ABS3 in adhesion assembly can be bypassed by constitutively active vinculin, suggesting that pathways that activate endogenous vinculin may also drive complex assembly. Consistent with this, the muscle-detachment phenotype caused by expressing a talin ABS3 mutant during Drosophila embryogenesis was partially rescued by vinculin⁴².

To date, the role of ABS2 in the central part of the talin rod has been ignored. Here we establish that talin ABS2 (R4-R8) is essential for stabilization of FA complexes, and for the generation of maximal traction force (Figs 4 and 6). Our biochemical experiments indicate that domains flanking ABS2 suppress its activity (Fig. 4c), suggesting that talin must undergo a conformational change that relieves this inhibitory effect. Since the talinFL^KVK/DDD mutation inhibits FA assembly (Fig. 7a), it seems likely that activation of ABS2 is initially regulated by engagement of ABS3 with actomyosin. However, the fact that the talinFL^KVK/DDD phenotype is rescued by vinT12 suggests additional regulation of ABS2 by vinculin binding to R3 (Fig. 7a, b). Indeed, our experiments with talin rod deletion mutants show that the VBSs in the R1-R3 domains are particularly important for FA stabilization, and magnetic tweezer experiments demonstrate that (i) force unmasks the VBSs in R2R3 (ref. 16) and (ii) that R3 is the initial mechanosensing domain unfolding at ∼5 pN (refs 24, 43). This conclusion is consistent with structural data which shows that while R2 is stabilized by R1 (ref. 10), R3 is the least stable of the three domains because of the presence of four threonine residues buried within its hydrophobic core^10,24.

Based on these results, we postulate that the initial association between talin ABS3 and actin provides sufficient force to overcome the 5 pN threshold to unfold the talin R3 helical bundle. This allows vinculin to bind to R3, relieving the inhibitory effect of R3 on ABS2 which then binds F-actin, reinforcing the link with the actomyosin machinery, leading to adhesion maturation. When the initial force acting on talin ABS3 is insufficient to unfold the R3 domain, binding of vinculin is suppressed, ABS2 is not activated and the complex disassembles, as seen in short-lived nascent adhesions³⁶.

Ratiometric imaging with talin deletion mutants and vinculin (Figs 3f and 1h) shows that the R2R3, R4-R10 and the C-terminal R11-R13 talin rod domains can all bind vinculin in vivo, confirming in vitro data of multiple VBSs along the talin rod¹². Data demonstrating that activated vinculin stabilizes talin mutants containing talin R2R3 and R4-R10 domains in FAs, and the FA structure itself (Fig. 2a,b) indicates that vinculin drives adhesion assembly through binding to VBSs in these domains. Vinculin-mediated adhesion stabilization depends in part on the actin binding activity of vinculin itself since maximal stability was not achieved using a constitutively active form of vinculin containing a mutation in its own actin binding site (Fig. 5c). These observations, together with the previously reported force mediated recruitment of vinculin to FAs^16,25,44, and the increased ratio of vinculin/talin during FA maturation⁴⁵, suggest that a gradual increase of force induces vinculin to bind to different sites in talin, thus strengthening the connectivity between the adhesion complex and the cytoskeleton. This additional mode of regulation through vinculin, whose own activity can be regulated by actomyosin-mediated forces, adds a regulatory module which appears key for the cell to respond to changes in the mechanical environment¹⁶.

We propose the following two-step model for talin activation and adhesion maturation which is key for co-ordinated force transduction and polarized cell migration (Fig. 8). Initially, talin, the bulk of which exists in an autoinhibited form in the cytosol^46,47, is recruited to the plasma membrane, the actin-rich lamellipodium and adhesion sites through pathways involving actin binding to ABS3, or its interaction with RIAM, integrins, PIP₂, exosomes⁴⁸ and FAK^49,50,51,52. Whether kindlin, which appears to precede talin in nascent adhesions⁴⁵, is involved in recruiting talin is unclear. At the leading edge, the talin head-rod auto-inhibitory interaction is disrupted possibly by PIP2 (ref. 50), and talin synergises with kindlins to activate integrins⁹ leading to the formation of nascent adhesions. Subsequently, actomyosin-mediated tension across talin, bound to integrins at one end and actin via ABS3 at the other, leads to unfolding of the R3 helical bundle relieving inhibition of ABS2 and exposing the two high affinity VBSs in R3, which can bind vinculin^16,24. Vinculin may prevent refolding of R3 locking ABS2 into an active state. The combined link of talin ABS2 and ABS3 to F-actin and the ability of vinculin to cross-link talin to actin stabilises talin in the adhesion complex. This hypothesis is supported by the recently published findings that talin engaged with F-actin at FAs is under tension, and is stretched and positioned by this F-actin linkage, thus orchestrating the molecular architecture of the FA⁵³. Further increases in myosin-II mediated force generation may subsequently activate additional VBSs localized along the talin rod leading to recruitment of more vinculin molecules, resulting in the maximal stabilization of the overall FA structure. The fact that vinT12 can bypass the role of talin ABS3 in FA assembly, suggests that pathways that activate vinculin (for example, via PIP2 (refs 54, 55)) may also drive FA assembly. FAs then act as signalling hubs controlling many aspects of cell behaviour including polarity and migration.

**Figure 8: Model for vinculin supported talin engagement with the actomyosin machinery.**

Methods

Cell lines and transfections

NIH3T3 fibroblasts and vinculin^−/− mouse embryonic fibroblasts (MEFs) were cultured in Dulbecco’s modified Eagle’s medium (DMEM) supplemented with 10% FCS, 1% L-glutamine and 1% non-essential amino acids. For the generation of talin1 and talin2 knock out cells, cells were isolated from the collecting ducts of 5–6-weeks-old talin1^flox/flox mice/ talin2 null mice⁵⁶ as described by Husted et al.⁵⁷ and immortalized with pSV40 plasmid. Loci for talin1 gene in collecting duct cells were deleted with adenovirus expressing Cre recombinase. Multiple clones of the double null cells were prepared by performing serial dilution cloning and verified similar functions in different clones. Gene deletion was verified by both PCR and immunoblotting for talin 1 and talin 2 (Supplementary Fig. 1a). Talin null cells were cultured in DMEM F-12 supplemented with 10% FCS, 1% L-glutamine, 15 μM HEPES and 1% Antimycotic solution (Sigma). All cells were cultured at 37 °C with 5% CO₂. Transient transfections were performed using Lipofectamine and Plus reagents (Life Technologies) as per the manufacturer’s instructions.

Antibodies, reagents and plasmids

Bovine fibronectin was purchased from Sigma and used at 10 μg ml⁻¹ diluted in PBS (Sigma). Y-27632 dihydrochloride (Tocris Bioscience) was dissolved in water and used at 50 μM for 30 min. Mouse anti-vinculin antibody (clone hVin1) (Sigma, UK) was diluted (1:500) in 1% Bovine Serum Albumin (BSA) (cat: V9131, Sigma, UK). Dylight 594-conjugated AffiniPure Donkey Anti-Mouse IgG (cat: 715-585-150, Jackson ImmunoResearch, USA) was used as a secondary antibody, diluted in 1% BSA (1:500). Site-directed mutagenesis was performed using the QuikChange Lightning Multi Site-Directed Mutagenesis kit (Agilent, USA). For western blotting, the primary antibodies used were mouse anti-talin (8d4) (cat: T3287, Sigma) and mouse anti-GFP (cat: 11 814 460 001, Roche), diluted 1:500 and 1:250, respectively, in 2% milk (PBS 0.1% Tween). The secondary antibody was goat anti-mouse IgG conjugated to horseradish peroxidase (cat: A9917, Sigma), diluted 1:5,000 in 2% milk (PBS 0.1% Tween). Bands were detected using enhanced luminol-based chemiluminescent substrate (Promega).

Western blots

Cells were transfected with the desired talin constructs, incubated for 24 h before lysis with Laemmli buffer. Samples were run on an SDS–polyacrylamide gel electrophoresis (SDS–PAGE) gel, 90 v, 15 min followed by 120 v, 1 h. Proteins were transferred to a nitrocellulose membrane at 250 mAmps, 2 h. The membrane was blocked for 1 h with 5% milk (PBS 0.1% Tween) and probed with the indicated primary antibodies. Uncropped scans of the blots are shown in Supplementary Fig. 9.

Immunofluorescence and microscopy

Cells transfected with GFP- and/or mCh-tagged proteins were incubated overnight on glass bottom dishes (MatTek), fixed with 4% paraformaldehyde and permeabilised with 0.5% Triton X-100 (Sigma). Samples were incubated with the primary antibody for 60 min, and then washed thrice with PBS. Secondary antibody staining followed the same procedure. Fixed samples were imaged using a Delta Vision RT microscope (Applied Precision) equipped with a 60 × /1.42 Plan Apo oil immersion objective (Zeiss). Images were acquired with a CoolSnap HQ camera (Photometrics).

Image analysis and ratio imaging

Image analysis was carried out using Fiji-ImageJ (version 1.48d) software. For all constructs, we analysed cells with low to intermediate expression levels of talin. Expression levels were determined by fluorescence intensities measured across a large number of cells/FAs in cells exposed to the same amounts of fluorescent light (exposure time below 500 ms). Adhesion size measurements were performed using the particle analysis function of imageJ after careful background subtraction⁷. For cell circularity measurements, a freehand region of interest was drawn and circularity was measured. Cells were classified as being either ‘circular’ or ‘elongated’ as has been described previously, where elongated cells have a circularity ⩾0.56 (ref. 10). For ratio imaging experiments, all images were acquired using the same exposure times. Ratio images were created using custom software; briefly, background noise was removed by thresholding, followed by division of the vinculin immunofluorescence image by the GFP-talin image. For ratio quantification, GFP-talin and vinculin immunofluorescence images were background subtracted, a region of interest was drawn around individual, peripheral adhesions (7 per cell) and the integrated density was measured for both channels. A ratio value was produced for each adhesion by dividing the values from vinculin images by talin images.

Fluorescence loss after photoactivation (FLAP)

Cells co-expressing the PAGFP-tagged protein of interest and the appropriate mCherry-tagged marker were plated onto fibronectin-coated glass bottom dishes. Both plasmids where expressed in a 1:1 ratio (cells were transfected with 1 μg of each) and only cells of healthy appearance with low to intermediate levels of the mCherry plasmid were selected for FLAP experiments. One hour before imaging, DMEM was replaced with Ham’s F-12 medium supplemented with 25 mM HEPES buffer, 2% FCS, 1% penicillin/streptomycin and 1% L-glutamine. Cells were allowed to equilibrate in a pre-warmed environment at 37 °C with 5% CO₂. Experiments were performed on a spinning disk confocal microscope (CSU10, Tokogawa) supplied by Intelligent Imaging Innovations, Inc. (3i), equipped with a 60 × /1.42 Plan Apo oil immersion objective (Zeiss). To photoactivate, a 405-nm laser was pulsed at full power for 5 ms at user-defined regions of interest. Fluorescence images were captured in 10 s intervals for a total period of 5 min using 488-nm and 561-nm laser lines used at full power with an appropriate exposure time. Approximately 4–5 FAs within a similar region of the cell were selected. To obtain intensity values over time, photoactivated fluorescence (PAF) images in the 488-nm channel were processed using a custom MATLAB (The Mathworks) script. Briefly, a user-defined threshold is used to detect FAs and create a mask. The mean intensity within each mask is measured and recorded. A second user-defined region is used to obtain background values, which are subtracted from the adhesion intensity values. Background-subtracted mean intensity values are then normalized to the first post-bleach intensities. Normalized intensity values were then fitted using Prism 6 (GraphPad Software) to single-phase exponential decay curves. The equation coefficients were extracted and transformed to generate F_M and t_1/2 loss of PAF.

Fluorescence recovery after photobleaching (FRAP)

Cells were transfected with GFP-tagged FA proteins of interest and FRAP experiments were performed using a Delta Vision RT microscope equipped with a 100 × /1.40 UPlan Apo oil immersion objective (Zeiss). FRAP laser beam diameter size was 1 μm and was held for 0.075 s per region of interest to bleach. Images were recorded every 10 s for 5 min following previously published methods⁵⁸. Normalized fluorescence intensities were obtained using Softworx FRAP analysis software. Data were imported into MATLAB and fitted with single exponential curve fits according to published FRAP models⁵⁹. A custom MATLAB script was used to extract the coefficients of the curve fits and the half-time (t_1/2) of recovery and mobile fraction (MF) were calculated.

Traction force microscopy

Fibronectin (FN) coated polyacrylamide (PAA) gels (6% of gel diluted from 30% Protogel in PBS, 37.5:1 fixed ratio of arylamide/bis-acrylamide; EC-890, National Diagnostics) containing 1:100 dilution of 0.2 μm FluoSpheres carboxylate-modified microspheres (F8805, blue fluorescent (365/415), Life Technologies) were prepared using previously published methods with modifications^60,61. The stiffness (8.760±0.209 kPa) of 6% PAA gels were measured with a CellHesion Atomic Force Microscope (Nanowizard, CellHesion 200; JPK Instruments, Berlin, Germany) with tip-less cantilevers (NP-O10, Bruker AFM Probes) modified by attaching 10 μm diameter polystyrene beads (PPS-10.0, Kisker).

Transfected cells were plated on gels and allowed to spread overnight. Cell spreading deformed the surfaces of the gels thus changing the position of the embedded beads. Fluorescence images of the embedded beads were captured on a Delta Vision microscope system (Applied Precision, Washington, USA) using an oil immersion × 60 (NA=1.42) objective. After taking bead images, 0.05% Triton X100 was added to detach the cells and thus release forces mediated by cells on the gel. Subsequently, images of bead positions under null cellular forces were obtained as reference images. The traction forces exerted by cells were analysed by measuring the bead displacement induced by cells; i.e. bead position changes of reference image and image with cells. Traction force analysis was performed using a MATLAB algorithm⁶². Bead displacement was calculated using cross-correlation between both bead images (before and after Triton X100 treatment). The corresponding gel deformation was obtained by two-dimensional Gaussian interpolation. The stress field (Pa) was calculated from the gel deformation by implementing a Fourier transform-based algorithm using the Boussinesq Green’s function. The total force (nN) was the sum of all overall traction forces exerted from one single cell.

Protein expression and purification

Talin constructs were synthesized by PCR using a mouse talin1 cDNA as template, and cloned into pET-151/D-TOPO (Invitrogen). Constructs were expressed in Escherichia coli BL21 Star (DE3) cultured in LB. Recombinant His-tagged talin polypeptides were purified by nickel-affinity chromatography following standard procedures⁶³. The His-tag was removed by cleavage with AcTEV protease (Invitrogen), and the protein was further purified by anion-exchange chromatography. Concentration was determined using extinction coefficients at 280 nm. Recombinant His- tagged chicken vinculin domain 1 (Vd1; residues 1–258) was expressed from a pET-15b plasmid and purified via nickel-affinity chromatography followed by anion-exchange chromatography, as described by²⁰.

Actin co-sedimentation assays

Rabbit skeletal muscle G-actin⁶⁴ was polymerized in 10 mM Tris, 50 mM NaCl, 100 μM ATP, 1 mM DTT, 1 mM MgCl2, pH 7.0. Assays were performed using 4 μM talin polypeptides and 10 μM F-actin. The mixture was incubated for 60 min at room temperature and centrifuged at 100,000 r.p.m. for 30 min at 22 °C using a Beckman Optima TM ultracentrifuge. Supernatants and pellets were analysed on 12% SDS–PAGE gels and stained using Coomassie blue.

FACS Analysis of integrin activation

The level of β1 integrin activation was measured by staining cells with the 9EG7 monoclonal antibody (553715, BD Biosciences) and fluorescence activated cell sorting (FACS). Cells (10⁶/tube) were washed and re-suspended in FACS buffer (1% bovine serum albumin (BSA: A9647, Sigma) in PBS), incubated with 9EG7 diluted in FACS buffer for 1 h on ice and then washed in the same buffer three times. Cells were then incubated with DyLight 649 conjugated donkey anti-rat (Jackson lmmunoResearch) diluted in FACS buffer for 45 min on ice before two washes with FACS buffer, and a final wash with PBS. FACS analysis was carried out by using Cyan ADP (Beckman Coulter) and Summit software (V4.3, Beckman).

Additional information

How to cite this article: Atherton, P. et al. Vinculin controls talin engagement with the actomyosin machinery. Nat. Commun. 6:10038 doi: 10.1038/ncomms10038 (2015).

References

Wehrle-Haller, B. Assembly and disassembly of cell matrix adhesions. Curr. Opin. Cell. Biol. 24, 569–581 (2012).
Article CAS PubMed Google Scholar
Gardel, M. L., Schneider, I. C., Aratyn-Schaus, Y. & Waterman, C. M. Mechanical integration of actin and adhesion dynamics in cell migration. Annu. Rev. Cell. Dev. Biol. 26, 315–333 (2010).
Article CAS PubMed PubMed Central Google Scholar
Roca-Cusachs, P., Iskratsch, T. & Sheetz, M. P. Finding the weakest link: exploring integrin-mediated mechanical molecular pathways. J. Cell. Sci. 125, 3025–3038 (2012).
Article CAS PubMed Google Scholar
Zhang, X. et al. Talin depletion reveals independence of initial cell spreading from integrin activation and traction. Nat. Cell Biol. 10, 1062–1068 (2008).
Article CAS PubMed PubMed Central Google Scholar
Coll, J. L. et al. Targeted disruption of vinculin genes in F9 and embryonic stem cells changes cell morphology, adhesion, and locomotion. Proc. Natl Acad. Sci. USA 92, 9161–9165 (1995).
Article ADS CAS PubMed Google Scholar
Saunders, R. M. et al. Role of vinculin in regulating focal adhesion turnover. Eur. J. Cell. Biol. 85, 487–500 (2006).
Article CAS PubMed Google Scholar
Humphries, J. D. et al. Vinculin controls focal adhesion formation by direct interactions with talin and actin. J. Cell Biol. 179, 1043–1057 (2007).
Article CAS PubMed PubMed Central Google Scholar
Thievessen, I. et al. Vinculin-actin interaction couples actin retrograde flow to focal adhesions, but is dispensable for focal adhesion growth. J. Cell Biol. 202, 163–177 (2013).
Article CAS PubMed PubMed Central Google Scholar
Calderwood, D. A., Campbell, I. D. & Critchley, D. R. Talins and kindlins: partners in integrin-mediated adhesion. Nat. Rev. Mol. Cell Biol. 14, 503–517 (2013).
Article CAS PubMed PubMed Central Google Scholar
Goult, B. T. et al. RIAM and vinculin binding to talin are mutually exclusive and regulate adhesion assembly and turnover. J. Biol. Chem. 288, 8238–8249 (2013).
Article CAS PubMed PubMed Central Google Scholar
Lee, H.-S., Anekal, P., Lim, C. J., Liu, C.-C. & Ginsberg, M. H. Two modes of integrin activation form a binary molecular switch in adhesion maturation. Mol. Biol. Cell 24, 1354–1362 (2013).
Article CAS PubMed PubMed Central Google Scholar
Gingras, A. R. et al. Mapping and consensus sequence identification for multiple vinculin binding sites within the talin rod. J. Biol. Chem. 280, 37217–37224 (2005).
Article CAS PubMed Google Scholar
Moes, M. et al. The integrin binding site 2 (IBS2) in the talin rod domain is essential for linking integrin beta subunits to the cytoskeleton. J. Biol. Chem. 282, 17280–17288 (2007).
Article CAS PubMed Google Scholar
Hemmings, L. et al. Talin contains three actin-binding sites each of which is adjacent to a vinculin-binding site. J. Cell Sci. 109, 2715–2726 (1996).
CAS PubMed Google Scholar
Kim, C., Ye, F. & Ginsberg, M. H. Regulation of integrin activation. Annu. Rev. Cell Dev. Biol. 27, 321–345 (2011).
Article CAS PubMed Google Scholar
Carisey, A. et al. Vinculin regulates the recruitment and release of core focal adhesion proteins in a force-dependent manner. Curr. Biol. 23, 271–281 (2013).
Article CAS PubMed PubMed Central Google Scholar
Dumbauld, D. W. et al. How vinculin regulates force transmission. Proc. Natl Acad. Sci. USA 110, 9788–9793 (2013).
Article ADS CAS PubMed Google Scholar
Carisey, A. & Ballestrem, C. Vinculin, an adapter protein in control of cell adhesion signalling. Eur. J. Cell Biol. 90, 157–163 (2011).
Article CAS PubMed PubMed Central Google Scholar
Ziegler, W. H., Liddington, R. C. & Critchley, D. R. The structure and regulation of vinculin. Trends Cell Biol. 16, 453–460 (2006).
Article CAS PubMed Google Scholar
Papagrigoriou, E. et al. Activation of a vinculin-binding site in the talin rod involves rearrangement of a five-helix bundle. EMBO J. 23, 2942–2951 (2004).
Article CAS PubMed PubMed Central Google Scholar
Gingras, A. R. et al. Central region of talin has a unique fold that binds vinculin and actin. J. Biol. Chem. 285, 29577–29587 (2010).
Article CAS PubMed PubMed Central Google Scholar
Gingras, A. R. et al. The structure of the C-terminal actin-binding domain of talin. EMBO J. 27, 458–469 (2008).
Article CAS PubMed Google Scholar
del Rio, A. et al. Stretching single talin rod molecules activates vinculin binding. Science 323, 638–641 (2009).
Article ADS CAS PubMed Google Scholar
Yao, M. et al. Mechanical activation of vinculin binding to talin locks talin in an unfolded conformation. Sci. Rep. 4, 4610 (2014).
Article PubMed PubMed Central Google Scholar
Ciobanasu, C., Faivre, B. & Le Clainche, C. Actomyosin-dependent formation of the mechanosensitive talin-vinculin complex reinforces actin anchoring. Nat. Commun. 5, 3095 (2014).
Article ADS PubMed PubMed Central Google Scholar
Praekelt, U. et al. New isoform-specific monoclonal antibodies reveal different sub-cellular localisations for talin1 and talin2. Eur. J. Cell Biol. 91, 180–191 (2012).
Article CAS PubMed PubMed Central Google Scholar
Monkley, S. J., Pritchard, C. A. & Critchley, D. R. Analysis of the mammalian talin2 gene TLN2. Biochem. Biophys. Res. Commun. 286, 880–885 (2001).
Article CAS PubMed Google Scholar
Wang, P., Ballestrem, C. & Streuli, C. H. The C terminus of talin links integrins to cell cycle progression. J. Cell. Biol. 195, 499–513 (2011).
Article CAS PubMed PubMed Central Google Scholar
Himmel, M. et al. Control of high affinity interactions in the talin C terminus: how talin domains coordinate protein dynamics in cell adhesions. J. Biol. Chem. 284, 13832–13842 (2009).
Article CAS PubMed PubMed Central Google Scholar
Cohen, D. M., Chen, H., Johnson, R. P., Choudhury, B. & Craig, S. W. Two distinct head-tail interfaces cooperate to suppress activation of vinculin by talin. J. Biol. Chem. 280, 17109–17117 (2005).
Article CAS PubMed Google Scholar
Nakamura, F., Osborn, T. M., Hartemink, C. A., Hartwig, J. H. & Stossel, T. P. Structural basis of filamin A functions. J. Cell 179, 1011–1025 (2007).
Article CAS Google Scholar
Shen, K. et al. The vinculin C-terminal hairpin mediates F-actin bundle formation, focal adhesion and cell mechanical properties. J. Biol. Chem. 286, 45103–45115 (2011).
Article CAS PubMed PubMed Central Google Scholar
Jannie, K. M. et al. Vinculin-dependent actin bundling regulates cell migration and traction forces. Biochem. J. 465, 383–393 (2014).
Article Google Scholar
Bershadsky, A. D. et al. Assembly and mechanosensory function of focal adhesions: experiments and models. Eur. J. Cell Biol. 85, 165–173 (2005).
Article PubMed Google Scholar
Riveline, D. et al. Focal contacts as mechanosensors: externally applied local mechanical force induces growth of focal contacts by an mDia1-dependent and ROCK-independent mechanism. J. Cell Biol. 153, 1175–1186 (2001).
Article CAS PubMed PubMed Central Google Scholar
Ballestrem, C., Hinz, B., Imhof, B. A. & Wehrle-Haller, B. Marching at the front and dragging behind: differential alphaVbeta3-integrin turnover regulates focal adhesion behavior. J. Cell Biol. 155, 1319–1332 (2001).
Article CAS PubMed PubMed Central Google Scholar
Zaidel-Bar, R., Ballestrem, C., Kam, Z. & Geiger, B. Early molecular events in the assembly of matrix adhesions at the leading edge of migrating cells. J. Cell Sci. 116, 4605–4613 (2003).
Article CAS PubMed Google Scholar
Tadokoro, S. et al. Talin binding to integrin beta tails: a final common step in integrin activation. Science 302, 103–106 (2003).
Article ADS CAS PubMed Google Scholar
Rossier, O. et al. Integrins β1 and β3 exhibit distinct dynamic nanoscale organizations inside focal adhesions. Nat. Cell Biol. 14, 1057–1067 (2012).
Article CAS PubMed Google Scholar
Giannone, G., Jiang, G., Sutton, D. H., Critchley, D. R. & Sheetz, M. P. Talin1 is critical for force-dependent reinforcement of initial integrin-cytoskeleton bonds but not tyrosine kinase activation. J. Cell Biol. 163, 409–419 (2003).
Article CAS PubMed PubMed Central Google Scholar
Galbraith, C. G., Yamada, K. M. & Galbraith, J. A. Polymerizing actin fibers position integrins primed to probe for adhesion sites. Science 315, 992–995 (2007).
Article ADS CAS PubMed Google Scholar
Klapholz, B. et al. Alternative mechanisms for talin to mediate integrin function. Curr. Biol. 25, 847–857 (2015).
Article CAS PubMed PubMed Central Google Scholar
Yan, J., Yao, M., Goult, B. T. & Sheetz, M. P. Talin dependent mechanosensitivity of cell focal adhesions. Cel. Mol. Bioeng 8, 151–159 (2014).
Article Google Scholar
Hirata, H., Tatsumi, H., Lim, C. T. & Sokabe, M. Force-dependent vinculin binding to talin in live cells: a crucial step in anchoring the actin cytoskeleton to focal adhesions. Am. J. Physiol. Cell Physiol. 306, C607–C620 (2014).
Article CAS PubMed Google Scholar
Bachir, A. I. et al. Integrin-associated complexes form hierarchically with variable stoichiometry in nascent adhesions. Curr. Biol. 24, 1845–1853 (2014).
Article CAS PubMed PubMed Central Google Scholar
Goult, B. T. et al. Structural studies on full-length talin1 reveal a compact auto-inhibited dimer: implications for talin activation. J. Struct. Biol. 184, 21–32 (2013).
Article CAS PubMed PubMed Central Google Scholar
Banno, A. et al. Subcellular Localization of Talin Is Regulated by Inter-domain Interactions. J. Biol. Chem. 287, 13799–13812 (2012).
Article CAS PubMed PubMed Central Google Scholar
Thapa, N. et al. Phosphoinositide signaling regulates the exocyst complex and polarized integrin trafficking in directionally migrating cells. Dev. Cell 22, 116–130 (2012).
Article CAS PubMed PubMed Central Google Scholar
Lafuente, E. M. et al. ScienceDirect.com – Developmental cell – RIAM, an Ena/VASP and profilin ligand, interacts with Rap1-GTP and mediates Rap1-induced adhesion. Dev. Cell 7, 585–595 (2004).
Article CAS PubMed Google Scholar
Martel, V. et al. Conformation, localization, and integrin binding of talin depend on its interaction with phosphoinositides. J. Biol. Chem. 276, 21217–21227 (2001).
Article CAS PubMed Google Scholar
Calderwood, D. A. et al. The Talin head domain binds to integrin beta subunit cytoplasmic tails and regulates integrin activation. J. Biol. Chem. 274, 28071–28074 (1999).
Article CAS PubMed Google Scholar
Lawson, C. et al. FAK promotes recruitment of talin to nascent adhesions to control cell motility. J. Cell Biol. 196, 223–232 (2012).
Article CAS PubMed PubMed Central Google Scholar
Liu, J. et al. Talin determines the nanoscale architecture of focal adhesions. Proc. Natl Acad. Sci. USA 112, E4864–E4873 (2015).
Article CAS PubMed Google Scholar
Gilmore, A. P. & Burridge, K. Regulation of vinculin binding to talin and actin by phosphatidyl- inositol-4-5-bisphosphate. Nature 381, 531–535 (1996).
Article ADS CAS PubMed Google Scholar
Chinthalapudi, K. et al. Lipid binding promotes oligomerization and focal adhesion activity of vinculin. J. Cell Biol. 207, 643–656 (2014).
Article CAS PubMed PubMed Central Google Scholar
Debrand, E. et al. Mice carrying a complete deletion of the talin2 coding sequence are viable and fertile. Biochem. Biophys. Res. Commun. 426, 190–195 (2012).
Article CAS PubMed PubMed Central Google Scholar
Husted, R. F., Hayashi, M. & Stokes, J. B. Characteristics of papillary collecting duct cells in primary culture. Am. J. Physiol. Renal Physiol. 255, F1160–F1169 (1988).
Article CAS Google Scholar
Carisey, A., Stroud, M., Tsang, R. & Ballestrem, C. Fluorescence recovery after photobleaching. Methods Mol. Biol. 769, 387–402 (2011).
Article CAS PubMed Google Scholar
Sprague, B. L. & McNally, J. G. FRAP analysis of binding: proper and fitting. Trends Cell Biol. 15, 84–91 (2005).
Article CAS PubMed Google Scholar
Zhang, J., Guo, W.-H., Rape, A. & Wang, Y.-L. Micropatterning cell adhesion on polyacrylamide hydrogels. Methods Mol. Biol. 1066, 147–156 (2013).
Article CAS PubMed Google Scholar
Pelham, R. J. & Wang, Y. L. Cell locomotion and focal adhesions are regulated by substrate flexibility. Proc. Natl Acad. Sci. USA 94, 13661–13665 (1997).
Article ADS CAS PubMed Google Scholar
Koch, D., Rosoff, W. J., Jiang, J., Geller, H. M. & Urbach, J. S. Strength in the periphery: growth cone biomechanics and substrate rigidity response in peripheral and central nervous system neurons. Biophys. J. 102, 452–460 (2012).
Article CAS PubMed PubMed Central Google Scholar
Goult, B. T. et al. The structure of an interdomain complex that regulates talin activity. J. Biol. Chem. 284, 15097–15106 (2009).
Article CAS PubMed PubMed Central Google Scholar
Pardee, J. D. & Spudich, J. A. in Methods in Cell Biology 24, 271–289Elsevier, (1982).
Article CAS PubMed Google Scholar

Download references

Acknowledgements

C.B. acknowledges the Biotechnology and Biological Sciences Research Council (BBSRC) and Wellcome Trust for funding of this project. The CB laboratory is part of the Wellcome Trust Centre for Cell-Matrix Research, University of Manchester, which is supported by core funding from the Wellcome Trust (grant number 088785/Z/09/Z). P.A. is funded by BBSRC (BB/J012254/1) and Bioventus; B.S. is supported by Wellcome Trust (099734/Z/12/Z); D.J. and R.T. were supported BBSRC DTP studentships. E.M. was supported by a FEBS short-term fellowship. The Bioimaging Facility microscopes were purchased with grants from BBSRC, Wellcome Trust, and the University of Manchester Strategic Fund. We thank the staff of the Bioimaging facility at the University of Manchester, in particular Dr Peter March for his help and expertise with imaging; Dr Mike Jackson for his assistance with FACS; Dr Kristian Franze for his help with traction force microscopy analysis; Janet Askari and Martin Humphries for critical reading of the manuscript; Egor Zindy and Alex Carisey for designing software used for ratio-imaging.

Author information

Paul Atherton, Ben Stutchbury and De-Yao Wang: These authors contributed equally to this work

Authors and Affiliations

Wellcome Trust Centre for Cell-Matrix Research, University of Manchester, Manchester, M13 9PT, UK
Paul Atherton, Ben Stutchbury, De-Yao Wang, Devina Jethwa, Ricky Tsang, Pengbo Wang & Christoph Ballestrem
Department of Microbiology, Complutense, University of Madrid, Madrid, 28040, Spain
Eugenia Meiler-Rodriguez
Department of Biochemistry, University of Leicester, Lancaster Road, Leicester, LE1 9HN, UK
Neil Bate & David R. Critchley
Vanderbilt Division of Nephrology, Vanderbilt Centre for Kidney Disease, S-3223 Medical Centre, North Nashville, Tennessee, USA
Roy Zent
Institute of Integrative Biology, University of Liverpool, Crown Street, Liverpool, L69 7ZB, UK
Igor L. Barsukov
School of Biosciences, University of Kent, Canterbury, CT2 7NJ, KENT, UK
Benjamin T. Goult

Authors

Paul Atherton
View author publications
You can also search for this author in PubMed Google Scholar
Ben Stutchbury
View author publications
You can also search for this author in PubMed Google Scholar
De-Yao Wang
View author publications
You can also search for this author in PubMed Google Scholar
Devina Jethwa
View author publications
You can also search for this author in PubMed Google Scholar
Ricky Tsang
View author publications
You can also search for this author in PubMed Google Scholar
Eugenia Meiler-Rodriguez
View author publications
You can also search for this author in PubMed Google Scholar
Pengbo Wang
View author publications
You can also search for this author in PubMed Google Scholar
Neil Bate
View author publications
You can also search for this author in PubMed Google Scholar
Roy Zent
View author publications
You can also search for this author in PubMed Google Scholar
Igor L. Barsukov
View author publications
You can also search for this author in PubMed Google Scholar
Benjamin T. Goult
View author publications
You can also search for this author in PubMed Google Scholar
David R. Critchley
View author publications
You can also search for this author in PubMed Google Scholar
Christoph Ballestrem
View author publications
You can also search for this author in PubMed Google Scholar

Contributions

P.A., B.S., D.Y.W., D.J., R.T., E.M., P.W., N.B. and B.G. participated in the design of the experiments, carried them out and analysed the data. P.A. and B.S. carried out Photoactivation and FRAP experiments; D.Y.W. designed the protocol for and carried out traction force microscopy experiments and performed integrin activation profiling experiments; D.J. and E.M. carried out morphology experiments; D.J. and R.T. performed ratio-imaging experiments; B.S. performed the western blots and Y-27632 experiments; P.A. and D.J. carried out migration experiments; P.A. performed site-directed mutagenesis; N.B., I.B., B.G. and D.C. provided talin constructs; N.B. and B.G. carried out biochemistry experiments to characterize the ABS2 binding sites; R.Z. provided the talin knock out cells. P.A. prepared the figures; P.A., B.S., C.B. designed the experiments; C.B., D.C., I.B. and B.G. conceived ideas; C.B. and D.C. wrote the manuscript with contributions from P.A., B.S., I.B. and B.G. C.B. supervised and directed the project.

Corresponding author

Correspondence to Christoph Ballestrem.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Figures

Supplementary Figures 1-9 (PDF 1066 kb)

Supplementary Movie 1

Related to Figure 1. Recording of TKO spreading on fibronectin-coated glass. The video shows a TKO cell transfected with GFP-talinFL spreading on fibronectin-coated glass over two hours. Several non-transfected cells can be seen within the same field-of-view, which do not spread and remain rounded. Imaging was started prior to the addition of cells to fibronectin-coated glass in a microscope chamber kept at 37 °C supplemented with 5% CO₂. Images were acquired every 150 seconds for 2 hours. Images are played back at 5 frames/s. Scale bar represents 40 μm. (MOV 109 kb)

Supplementary Movie 2

Related to Figure 2. Recording of NIH3T3 cells to demonstrate the fluorescence loss after photoactivation (FLAP) technique. The video shows an NIH3T3 cell expressing zyxin-mCherry and photoactivatable (PA)GFP-talinFL before and after photoactivation with a 405-nm laser. The box indicates the region that was targeted for photoactivation and the fluorescence intensity plot shows the FLAP over time. Images were taken every 10 seconds for 5 minutes following photoactivation. Images are played back at 5 frames/s. Scale bar represents 10 μm. (MOV 262 kb)

Supplementary Movie 3

Related to Figure 2. Recording of FLAP in FAs from NIH3T3 cells expressing the indicated PAGFP-talin construct +/- constitutively active vinculin. The top panel shows FLAP in control NIH3T3 cells. The fluorescence intensity plot shows the FLAP over time. Note the increased turnover of talΔR4-R10 and talΔR1-R10 compared to talinFL. The bottom panel shows FLAP in NIH3T3 cells co-expressing vinT12. Note the reduced turnover of talinFL and talΔR4-R10, but not talΔR1-R10, in the presence of constitutively active vinculin. Images were taken every 10 seconds for 5 minutes following photoactivation. Images are played back at 5 frames/s. Scale bar represents 5 μm. (MOV 745 kb)

Supplementary Movie 4

Related to Figure 2. Recording of FLAP in FAs from NIH3T3 cells expressing PAGFP-talinFL +/- vinT12 or vinT12^A50I. The video shows FLAP in NIH3T3 cells expressing PAGFP-tagged talinFL as well as the indicated constitutively active mCherry-tagged vinT12 construct. Note that vinT12, but not vinT12^A50I, is able to stabilise talinFL within FAs. Images were taken every 10 seconds for 5 minutes following photoactivation. Images are played back at 5 frames/s. Scale bar represents 5 μm. (MOV 517 kb)

Supplementary Movie 5

Related to Figure 3. Recording of FLAP in FAs from TKO cells expressing PAGFP-talinFL or talΔR2R3. The video shows FLAP in TKO cells expressing PAGFP-tagged talinFL or talΔR2R3. The fluorescence intensity plot shows the FLAP over time. Note the reduced turnover of talΔR2R3 compared to talinFL. Images were taken every 10 seconds for 5 minutes following photoactivation. Images are played back at 5 frames/s. Scale bar represents 5 μm. (MOV 288 kb)

Supplementary Movie 6

Related to Figure 5. Recording of FLAP in FAs from TKO cells expressing PAGFP-talinFL or talΔR8. The video shows FLAP in TKO cells expressing PAGFP-tagged talinFL or talΔR8. The fluorescence intensity plot shows the FLAP over time. Note the increased turnover of talΔR8 compared to talinFL. Images were taken every 10 seconds for 5 minutes following photoactivation. Images are played back at 5 frames/s. Scale bar represents 5 μm. (MOV 262 kb)

Supplementary Movie 7

Related to Figure 5. Recording of FLAP in FAs from TKO cells expressing PAGFP-talinFL or talinFL^ABS2mut +/- constitutively active vinculin. The top panel shows FLAP in control TKO cells. The fluorescence intensity plot shows the FLAP over time. Note the increased turnover on talinFLABS2mut compared to talinFL. The bottom panel shows FLAP in TKO cells co-expressing vinT12. Both talinFL and talinFL^ABS2mut show a reduced turnover in the presence of constitutively active vinculin. However, talinFL^ABS2mut is still more mobile than talinFL. Images were taken every 10 seconds for 5 minutes following photoactivation. Images are played back at 5 frames/s. Scale bar represents 5 μm. (MOV 489 kb)

Supplementary Movie 8

Related to Figure 6. Recording of FLAP in FAs from TKO cells expressing PAGFP-talΔR2R3 or talΔR2R3^ABS2mut. The video shows FLAP in TKO cells expressing PAGFP-tagged talΔR2R3 or talΔR2R3^ABS2mut. The fluorescence intensity plot shows the FLAP over time. Note the increased turnover of talΔR2R3^ABS2mut compared to talΔR2R3. Images were taken every 10 seconds for 5 minutes following photoactivation. Images are played back at 5 frames/s. Scale bar represents 5 μm. (MOV 275 kb)

Supplementary Movie 9

Related to Figure 6. Recording of FLAP in FAs from TKO cells expressing PAGFP-talinFL +/- vinT12 or vinT12^I997A. The video shows FLAP in TKO cells expressing PAGFP-tagged talinFL as well as the indicated constitutively active vinT12 construct. Note that in the presence of vinT12^I997A, talinFL is partially stabilised within FAs, but not to the same level as with vinT12. Images were taken every 10 seconds for 5 minutes following photoactivation. Images are played back at 5 frames/s. Scale bar represents 5 μm. (MOV 362 kb)

Rights and permissions

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Reprints and permissions

About this article

Cite this article

Atherton, P., Stutchbury, B., Wang, DY. et al. Vinculin controls talin engagement with the actomyosin machinery. Nat Commun 6, 10038 (2015). https://doi.org/10.1038/ncomms10038

Download citation

Received: 22 September 2015
Accepted: 26 October 2015
Published: 04 December 2015
DOI: https://doi.org/10.1038/ncomms10038

This article is cited by

Structure, signal transduction, activation, and inhibition of integrin αIIbβ3
- Honglei Xin
- Jiansong Huang
- Xiaofeng Shi
Thrombosis Journal (2023)
Organization, dynamics and mechanoregulation of integrin-mediated cell–ECM adhesions
- Pakorn Kanchanawong
- David A. Calderwood
Nature Reviews Molecular Cell Biology (2023)
Remodeling of the focal adhesion complex by hydrogen-peroxide-induced senescence
- Carolin Grandy
- Fabian Port
- Kay-Eberhard Gottschalk
Scientific Reports (2023)
Biomechanical, biophysical and biochemical modulators of cytoskeletal remodelling and emergent stem cell lineage commitment
- Vina D. L. Putra
- Kristopher A. Kilian
- Melissa L. Knothe Tate
Communications Biology (2023)
Directed cell migration towards softer environments
- Aleksi Isomursu
- Keun-Young Park
- David J. Odde
Nature Materials (2022)

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.