Abstract
Rational, de novo design of RNA nanostructures can potentially integrate a wide array of structural and functional diversities. Such nanostructures have great promises in biomedical applications. Despite impressive progress in this field, all RNA building blocks (or tiles) reported so far are not geometrically well defined. They are generally flexible and can only assemble into a mixture of complexes with different sizes. To achieve defined structures, multiple tiles with different sequences are needed. In this study, we design an RNA tile that can homo-oligomerize into a uniform RNA nanostructure. The designed RNA nanostructure is characterized by gel electrophoresis, atomic force microscopy and cryogenic electron microscopy imaging. We believe that development along this line would help RNA nanotechnology to reach the structural control that is currently associated with DNA nanotechnology.
Similar content being viewed by others
Introduction
Self-assembled RNA nanostructures could potentially provide a platform to integrate a wide range of structural motifs and functionalities associated with RNA molecules, such as specific chemical binding1, catalysis capability2, gene regulation3 and organizing proteins into large machineries4. They promise many technological applications, such as drug delivery5,6 and arranging chemical reactions to produce useful chemicals7. Many exciting works have been reported recently along this line8,9. Often, natural RNA building blocks (also called as tiles or tectoRNAs) have been modified for such purposes10,11,12,13,14. Although convenient, this approach is limited to the structural elements of the natural building blocks. As a complementary approach, de novo design might offer higher versatility. Furthermore, such rational design also tests our knowledge about RNA and might allow us to build structures/functions that do not exist in nature but suit our needs.
In biology, one basic building block can homo-oligomerize/polymerize into defined structures. For example, capsid proteins can self-assemble into well-defined viral capsids15 and microtubulin can polymerize into long nanotubes16. In nanoengineering, DNA has been well explored for nanoconstruction and a range of well-behaved DNA building blocks (tiles) have been developed17,18. One single DNA tile can self-oligomerize/polymerize into nanocages, one-dimensional nanotubes, two-dimensional (2D) arrays and three-dimensional (3D) crystals19. In contrast, no RNA tile has been developed to have enough structural rigidity to homopolymerize/oligomerize into a defined large architecture. They will randomly associate into a mixture of complexes with different molecular weights. One potential way to overcome this problem is by using multiple tiles10,11,12,13,14, for example, using four tiles to form a heterotetramer. Can we rationally design RNA tiles that are structurally well defined so that they can polymerize/oligomerize into homo-oligomers with defined structures and molecular weights?
Here, we report such a study: a de novo designed RNA tile that self-assembles into a homo-octameric cube. The self-assembly behaviour is characterized by gel electrophoresis, atomic force microscopy (AFM) and cryogenic electron microscopy (cryoEM) imaging. We believe that development along these lines would help RNA nanotechnology to reach the structural control that is currently associated with DNA nanotechnology.
Results
Molecular design
The designed RNA tile is a two-stranded complex, R1–R2 (Fig. 1a). It contains three helical regions (Pa, Pb and Pc), two internal, single-stranded loops (Lab and Lbc) and two single-stranded tails (Ta and Tc). This design integrates three important structural elements: a T-shaped junction (T-junction), a 90° bend and a sticky-end cohesion. First, the T-junction is adapted from a DNA T-junction20,21,22. The overall structure of a T-junction contains two duplexes with one duplex perpendicularly (90°) stacking onto the major groove of the second one. It forms when a single-stranded tail (5–6 bases long) of a duplex hybridizes with a single-stranded loop of another duplex (Fig. 1b). We hypothesize that such a T-junction architecture will be equally compatible with RNA (A-form duplex) and DNA (B-form duplex)23,24,25. Here Ta tail–Lab loop base pairing among the tiles will cause the tiles to tetramerize and form a square (Fig. 1c). Note that each side of the square is two helical turns, or 22 base pairs (bp) long. Second, the 90° bend is taken from a naturally existing RNA element present in the internal ribosome entry site (IRES) of the hepatitis C virus (HCV) RNA genome26. Helix Pb is chosen to be 7 bp (~¾ helical turn) long so that the 90° bend would make the Pc domain to protrude out of the square plane by 90° (Fig. 1c). Third, tail Tc is a self-complementary sticky end. Tiles can homo-dimerize through sticky-end (Tc) cohesion. Sticky-end (Tc) cohesion will produce a long, continuous duplex that is 6+4+6=16 bp (1.5 turns) long. This length will present the two square planes to face each other. Conceptually, we think that the tiles first form homo-tetramers (squares) via T-junctions and the squares further homo-dimerize via sticky-end (Tc) cohesion. Thus, the final RNA complex will be homo-octamer of the tiles, cube-like structures. However, the assembly in solution probably is more like a cooperative assembly instead of a sequential assembly.
Electrophoretic study
RNA assembly was carried out by following the previously reported method14. Two-component strands at equal molar ratio were mixed in an Mg2+-containing, aqueous buffer and slowly cooled from 80 °C to 22 °C in 2 h. The assembly mixture was first analysed by native polyacrylamide gel electrophoresis (PAGE). Figure 2 shows the experimental result. The left two lanes are the individual component RNA strands. R1 sample appears as a sharp band, whose mobility suggests that R1 self-associates into dimers. R2 self-oligomerizes into a mixture, which smears out in the gel. The abnormal association behaviour of R2 can be partly attributed to the Tc tail. When this tail is removed (R2*), it appears as a sharp, strong band just like R1. Without the Tc tail, the blunt tile (R1−R2*) is supposed to form a planar tetramer via T-junction association; however, it cannot further dimerize into cube-like structure. This is consistent with the PAGE data. In addition to the main square product (57%), significant of triangle (40%) and trace amount of pentagon also exist. With the Tc tail, the tile self-associates into a cube-like octamer (dimer of tetramer) that shows as a dominant (80%), sharp band in the gel. Two weak bands appear either above or below the cube. There are two interesting phenomena in the native PAGE. First, the yield (80%) of cube-like octamer is higher than that (57%) of square tetramer. The sticky-end (Tc) cohesion influences the T-junction association. Such a synergistic assembly behaviour suggests that the final cube-like structure is not assembled from the pre-assembled square structure. Instead, the cube-like structure is simultaneously assembled cooperatively from the tiles via T-junction formation and sticky-end (Tc) cohesion. Second, those undesired by-products in the lanes of R1+R2 and R1−R2* are not as stable as the desired RNA complexes. The bands of those by-products significantly decrease while the bands of the desired RNA complexes remain the same, indicating that the desired structures are energetically more stable than other by-products.
AFM imaging
We have further applied AFM to examine the geometric structures of the assembled RNA complexes (Fig. 3). For blunt-ended sample, R1+R2*, the individual particles (height: 1.2 nm) are randomly distributed on the surfaces. At high magnification, different geometries can be clearly resolved. Statistically, there are ~37% triangle and~59% square, consistent with the observation by native PAGE. For the sample with sticky ends, R1+R2, the dominating particles exhibit a rectangle shape (14 × 12 nm). The particle height (2.8 nm) strongly suggests that they are not 2D, planar, 2D planar structures. Instead, they are the collapsed 3D structures. Both their shape and height indicate that they are the designed cube-like structures. Note that the apparent height (2.8 nm) is much less than the expected 7 nm. It is likely due to that the RNA cages collapse on the AMF substrate because of the strong electrostatic interaction between the RNA molecules and the substrate (mica) surface, and the dehydration required for imaging in air.
Cryogenic electron microscopy
To directly reveal the native 3D structure of the assembled RNA complex, we have imaged the RNA sample by cryoEM (Fig. 4)27. In raw cryoEM images, the individual particles can be easily identified (indicated by white boxes). Their shapes resemble the expected 2D projections of the designed prism. With the observed individual RNA particles, the original 3D structures of the RNA complexes are reconstructed by a single-particle 3D reconstruction technique28,29, which results in a structural model of tetragonal prism at a resolution of 2.1 nm. One step further, we made two pair comparisons between the computed 2D projections of the reconstructed model with individual raw particles observed in cryEM images (Fig. 4d) and with class average of raw particles with similar views (Fig. 5). Clear similarities observed in those comparisons further verified the reconstructed model.
Co-transcriptional assembly
The RNA self-assembly in this study is a robust process. It readily processes even though the RNAs are not pure and there are many other molecules, including RNA polymerase, DNA templates and other related RNA molecules. We have performed one control experiment. The DNA templates of the two-component RNA strands are mixed. On addition of RNA polymerase, co-transcription produces the two RNA strands. Without any purification, the transcription mixture is thermally annealed and analysed by native PAGE (Fig. 6). A strong band appears at the position of the target prism complex although the assembly yield is not clear. Thus, RNA purification after transcription is not a necessary process as also demonstrated by other studies24,30. It overcomes one of the problems that are faced by self-assembly of RNA nanostructures in cells, where RNA purification is not possible.
Discussion
We have successfully integrated a naturally existing RNA structural building block (90° bend) and a non-natural, artificially designed structural building block (T-junction) to design an RNA tile, which can readily homo-oligomerize into a predesigned, large architecture. It is a great challenge to design an RNA tile that can homo-oligomerize into a defined nanostructure. To the best of our knowledge, there is only one report in the literature, where an RNA duplex with an internal loop (a natural-existing 90° bend) self-tetramerizes into a square31. Here we expand the design principle to achieve higher structural complexity along this direction. Besides addressing the fundamental challenge in programmed RNA self-assembly, we believe that such a study will increase our capability of rationally designing RNA nanostructures33,34 to meet the needs of potential applications such as siRNA delivery5,6 and construction of in vivo RNA machineries4. In addition, we have observed a surprising but interesting phenomenon. There is a synergistic effect between different inter-tile interactions (T-linkage association and sticky-end cohesion). It promotes the assembly of one particular structure among many possible structures. Such an effect might be general in molecular self-assembly; which, however, needs to be further tested.
Methods
Oligonucleotides
All DNA strands were purchased from IDT, Inc. and purified by 20% denaturing PAGE. T7 promoter sequences are underlined. R1: 5′-GAG CCG GAU GGA CUC AGG CUA GCG GCU CUG CGC AGC CUG GC-3′. R2: 5′-GCG CGC CAG GAA CUA CUG CGC ACU AGC CUG AGU CCA UC-3′. R2*: 5′- GCC AGG AAC UAC UGC GCA CUA GCC UGA GUC CAU C-3′.
DNA template strands for R1: 5′-TTC TAA TAC GAC TCA CTA TAG AGC CGG ATG GAC TCA GGC TAG CGG CTC TGC GCA GCC TGG C-3′; 5′-GCC AGG CTG CGC AGA GCC GCT AGC CTG AGT CCA TCC GGC TCT ATA GTG AGT CGT ATT AGA A-3′.
DNA template for R2: 5′-TTC TAA TAC GAC TCA CTA TAG CGC GCC AGG AAC TAC TGC GCA CTA GCC TGA GTC CAT C-3′; 5′-GAT GGA CTC AGG CTA GTG CGC AGT AGT TCC TGG CGC GCT ATA GTG AGT CGT ATT AGA A-3′.
DNA template for R2*: 5′-TTC TAA TAC GAC TCA CTA TAG CCA GGA ACT ACT GCG CAC TAG CCT GAG TCC ATC-3′; 5′-GAT GGA CTC AGG CTA GTG CGC AGT AGT TCC TGG CTA TAG TGA GTC GTA TTA GAA-3′.
RNA preparation
All RNA molecules are synthesized by in vitro transcription with T7 RNA polymerase (the AmpliScribe T7-Flash transcription kit; Epicenter, Inc.) from corresponding DNA templates by following the manufacturer-recommended protocol, and then purified using the 20% denaturing PAGE.
Formation of RNA prisms
Two-component RNA strands (R1+R2 or R1+R2*) at 2 μM were combined in TAE/Mg2+ buffer and incubated at 80 °C for 5 min, 65 °C for 15 min, 50 °C for 30 min and 22 °C for 30 min. TAE/Mg2+ buffer contained 40 mM Tris base (pH 8.0), 20 mM acetic acid, 2 mM EDTA and 12.5 mM magnesium acetate.
Denaturing PAGE
The 20% denaturing PAGE gel was prepared with 19:1 acrylamide/bisacrylamide gel, 8 M urea and TBE buffer (89 mM Tris base (pH=8.0), 89 mM boric acid and 2 mM EDTA). The gel was run at 55 °C for 2 h at 650 V on Hoefer SE 600 electrophoresis system and then stained with ethidium bromide (Sigma). The major band was cut under ultraviolet light and eluted out.
Native PAGE
The 6% native PAGE gel is prepared with 19:1 acrylamide/biacrylamide gel and TAE/Mg2+ buffer. The gel was run at 22 or 50 °C, stained with Stains-All (Sigma) and scanned by an HP scanner (Scanjet 4070 Photosmart). For 22 °C gel, samples were directly used after annealing. For 55 °C gel, the sample was cooled to room temperature and incubated at 50 °C for 1 h before electrophoresis.
AFM imaging
A drop of 4 μl annealed RNA solution was deposited onto freshly cleaved mica substrate and incubated for 1 min. Then the mica surface was washed by 30 μl 2 mM Mg2+ aqueous solution to remove excess salts and any unbounded RNA complexes. AFM imaging was carried out on a Bruker MultiMode 8 AFM at SCANASYST-AIR mode with ScanAsyst-Air Silicon Nitride probe (Bruker).
Computationally building the 3D model of the prism
We started to build the 3D model from building the tile by joining A-form RNA duplexes with T-junction loop and 5-nt loop that generated 90° turn. T-junction loop was adapted from a DNA T-junction19,20,21 and generated in computer software Win COOT to ensure the T-shape. To manually connect the 6-nt loop with the duplex (indicated as Pa in Fig. 1a), we manipulated Pa to ensure that base C in loop Lab was close to base G on Pa and that base A on Pb was close to base C on Pa so that they could be joined together. The angle between Pa and Pb was controlled to be about 90°. The length of Pb was determined to be 7 bp to ensure duplex Pc would rotate 90° to be perpendicular to the RNA square. The 90° turn, 5-nt loop Lbc was extracted from the crystal structure (PDB_ID: 3P59) in the RCSB PDB database. The length of duplex Pc was subjected to change and determined at the last. We first assembled the RNA square by inserting the Ta tail of one tile into the Lab loop of another tile (T-junction interaction). As formed RNA square had four duplexes perpendicularly sticking out of the plane and facing the same side. By merging two such squares, we were able to determine that Pc could be 6-bp long and Tc could be 4 nt. We would like to point out that the such-generated 3D model is not energy-minimized 3D structure; instead, it serves as a convenient visual illustration.
CryoEM imaging
Three microlitres of solution (RNA concentration: 3 μM) was deposited on the Quantifoil grid (Electron Microscopy Sciences, Q250-CR2-400). The grid was blotted with two pieces of filter paper (Whatman, 1001-055) and immediately flash frozen by liquid nitrogen-cooled liquid ethane. Images were taken on FEI CM200 TEM with accelerating voltage of 200 kV under low-dose condition to minimize radiation damages to the samples. To enhance the image contrast, under-focus in the range of 2–4 μm were used to record the images by films.
Single-particle reconstruction
The single-particle reconstruction was carried out using computer software EMAN 2 (ref. 28). Totally, 400 particles were selected to go through reconstruction process using EMAN2 reconstruction package following the standard protocol. All the data were processed following EMAN2 reconstruction tutorial using the workflow interface, provided via Wiki at: http://blake.bcm.edu. A general summary of the steps include: import and pre-process micrographs; picking particles; CTF determination; remove bad particles and build particle sets; make 2D reference-free class averages; build an initial 3D model; 3D high-resolution refinement; evaluate the resolution of a 3D map.
About 200 randomly selected particles were used to build 12 class averages, which were used to generate initial models. The initial orientations of individual particles were randomly assigned within the corresponding asymmetric units of the D4 symmetry for the Nanoprism. With a C4 symmetry (a lower symmetry), a similar structural map was obtained. Totally, over 400 particles were used for the 3D refinements of the Nanoprism. The refinement was carried out with a 2° angle interval. A projection-matching algorithm was applied for the determination of the centre and orientation of the raw particles in the iterative refinement for the prism. The corresponding symmetry was imposed during the reconstruction. After the refinement, class averages of the raw particles and 2D projections of the 3D model were generated in two files but paired in order. The comparisons presented were manually selected to show the distinct and comprehensive orientations. The resolution of the resulted structural density map was determined to be at 2.1 nm, with the Fourier shell correlation (0.5 threshold criterion). Final reconstruction results were visualized by UCSF Chimera software.
Additional information
How to cite this article: Yu, J. et al. De novo design of an RNA tile that self-assembles into a homo-octameric nanoprism. Nat. Commun. 6:5724 doi: 10.1038/ncomms6724 (2015).
References
Ellington, A. D. & Szostak, J. W. In vitro selection of RNA molecules that bind specific ligands. Nature 346, 818–822 (1990).
Doherty, E. A. & Doudna, J. A. Ribozyme structures and mechanisms. Annu. Rev. Biophys. Biomol. Struct. 30, 457–475 (2001).
Elbashir, S. M. et al. Duplexes of 21-nucleotide RNAs mediate RNA interference in cultured mammalian cells. Nature 411, 494–498 (2001).
Shajani, Z., Sykes, M. T. & Williamson, J. R. Assembly of bacterial ribosomes. Annu. Rev. Biochem. 80, 501–526 (2011).
Shu, D., Shu, Y., Haque, F., Abdelmawla, S. & Guo, P. Thermodynamically stable RNA three-way junction for constructing multifunctional nanoparticles for delivery of therapeutics. Nat. Nanotechnol. 6, 658–667 (2011).
Afonin, K. A. et al. Activation of different split functionalities on re-association of RNA-DNA hybrids. Nat. Nanotechnol. 8, 296–304 (2013).
Delebecque, C. J., Lindner, A. B., Silver, P. A. & Aldaye, F. A. Organization of intracellular reactions with rationally designed RNA assemblies. Science 333, 470–474 (2011).
Guo, P. The emerging field of RNA nanotechnology. Nat. Nanotechnol. 5, 833–842 (2010).
Ohno, H. et al. Synthetic RNA–protein complex shaped like an equilateral triangle. Nat. Chem. 6, 116–120 (2011).
Chworos, A. et al. Building programmable jigsaw puzzles with RNA. Science 306, 2068–2072 (2004).
Shu, Y., Shu, D., Haque, F. & Guo, P. Fabrication of pRNA nanoparticles to deliver therapeutic RNAs and bioactive compounds into tumor cells. Nat. Protocols 8, 1635–1659 (2013).
Severcan, I. et al. A polyhedron made of tRNAs. Nat. Chem. 2, 772–779 (2010).
Afonin, K. A. et al. In vitro assembly of cubic RNA-based scaffolds designed in silico. Nat. Nanotechnol. 5, 686–682 (2010).
Hao, C. et al. Construction of RNA nanocages by re-engineering the packaging RNA (pRNA) of Phi29 bacteriophage. Nat. Commun. 5, 3890 (2014).
Kirnbauer, R., Booy, F., Cheng, N., Lowy, D. R. & Schiller, J. T. Papillomavirus L1 major capsid protein self-assembles into virus-like particles that are highly immunogenic. Proc. Natl Acad. Sci. USA 89, 12180–12184 (1992).
Schiff, P. B., Fant, J. & Horwitz, S. B. Promotion of microtubule assembly in vitro by taxol. Nature 277, 665–667 (1979).
Seeman, N. C. Nanomaterials based on DNA. Annu. Rev. Biochem. 79, 65–87 (2010).
Seeman, N. C., Mao, C. & Yan, N. Guest editorial: Nucleic acid nanotechnology. Acc. Chem. Res. 47, 1643–1644 (2014).
Lin, C. X., Liu, Y., Rinker, S. & Yan, H. DNA tile based self-assembly: building complex nanoarchitectures. Chemphyschem 7, 1641–1647 (2006).
Hamada, S. & Murata, S. Substrate-assisted assembly of interconnected single-duplex DNA nanostructures. Angew. Chem. Int. Ed. 48, 6820–6823 (2009).
Li, X. et al. DNA polyhedra with T-linkage. ACS Nano 6, 5138–5142 (2012).
Tian, C. et al. Approaching the limit: Can one DNA strand assemble into defined nanostructures? Langmuir 30, 5859–5862 (2014).
Ko, S. et al. Synergistic self-assembly of RNA and DNA molecules. Nat. Chem. 2, 1050–1055 (2010).
Wang, P., Ko, S., Tian, C., Hao, C. & Mao, C. RNA-DNA hybrid origami: folding of a long RNA strand into complex nanostructures using short DNA helper strands. Chem. Commun. 49, 5462–5464 (2013).
Endo, M. et al. RNA-templated DNA origami structures. Chem. Commun. 49, 2879–2881 (2013).
Dibrov, S. M., Johnston-Cox, H., Weng, Y. H. & Hermann, T. Functional architecture of HCV IRES domain II stabilized by divalent metal ions in the crystal and in solution. Angew. Chem. Int. Ed. 46, 226–229 (2007).
He, Y. et al. Hierarchical self-assembly of DNA into symmetric supramolecular polyhedral. Nature 452, 198–201 (2008).
Tang, G. et al. EMAN2: an extensible image processing suite for electron microscopy. J. Struct. Biol. 157, 38–46 (2007).
Goddard, T. D., Huang, C. C. & Ferrin, T. E. Visualizing density maps with UCSF Chimera. J. Struct. Biol. 157, 281–287 (2007).
Afonin, K. A. et al. Co-transcriptional assembly of chemically modified RNA nanoparticles functionalized with siRNAs. Nano Letter 12, 5192–5195 (2012).
Dibrov, S. M., McLean, J., Parsons, J. & Hermann, T. Self-assembling RNA square. Proc. Natl Acad. Sci. 108, 6405–6408 (2011).
Schneider, C. A., Rasband, W. S. & Eliceiri, K. W. NIH Image to ImageJ: 25 years of image analysis. Nat. Methods 9, 671–675 (2012).
Grabow, W. W. & Jaeger, L. RNA self-assembly and RNA nanotechnology. Acc. Chem. Res. 47, 1871–1880 (2014).
Afonin, K. A. et al. In silico design and enzymatic synthesis of functional RNA nanoparticles. Acc. Chem. Res. 47, 1731–1741 (2014).
Acknowledgements
We thank NSF and NSFC (#81429001) for supporting this research. The cryoEM images were taken in the Purdue Biological Electron Microscopy facility.
Author information
Authors and Affiliations
Contributions
C.M. and G.W. conceived the project; C.M. supervised the project; C.M., J.Y. and Z.L. designed the experiment; J.Y. performed all the experiments; all authors analysed the data; C.M. and J.Y. wrote the manuscript; and everyone commented on the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
About this article
Cite this article
Yu, J., Liu, Z., Jiang, W. et al. De novo design of an RNA tile that self-assembles into a homo-octameric nanoprism. Nat Commun 6, 5724 (2015). https://doi.org/10.1038/ncomms6724
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms6724
This article is cited by
-
Visualizing the functional 3D shape and topography of long noncoding RNAs by single-particle atomic force microscopy and in-solution hydrodynamic techniques
Nature Protocols (2020)
-
Engineering a Floxuridine-integrated RNA Prism as Precise Nanomedicine for Drug Delivery
Chemical Research in Chinese Universities (2020)
-
Protein-driven RNA nanostructured devices that function in vitro and control mammalian cell fate
Nature Communications (2017)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.