Abstract
Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications, including optical atomic clocks1, microwave photonics2, spectroscopy3, optical wave synthesis4, frequency conversion5, communications6, lidar7, optical computing8 and astronomy9. The leading approaches for on-chip pulse generation rely on mode-locking inside microresonators with either third-order nonlinearity10 or with semiconductor gain11,12. These approaches, however, are limited in noise performance, wavelength and repetition rate tunability 10,13. Alternatively, subpicosecond pulses can be synthesized without mode-locking, by modulating a continuous-wave single-frequency laser using electro-optic modulators1,14,15,16,17. Here we demonstrate a chip-scale femtosecond pulse source implemented on an integrated lithium niobate photonic platform18, using cascaded low-loss electro-optic amplitude and phase modulators and chirped Bragg grating, forming a time-lens system19. The device is driven by a continuous-wave distributed feedback laser chip and controlled by a single continuous-wave microwave source without the need for any stabilization or locking. We measure femtosecond pulse trains (520-femtosecond duration) with a 30-gigahertz repetition rate, flat-top optical spectra with a 10-decibel optical bandwidth of 12.6 nanometres, individual comb-line powers above 0.1 milliwatts, and pulse energies of 0.54 picojoules. Our results represent a tunable, robust and low-cost integrated pulsed light source with continuous-wave-to-pulse conversion efficiencies an order of magnitude higher than those achieved with previous integrated sources. Our pulse generator may find applications in fields such as ultrafast optical measurement19,20 or networks of distributed quantum computers21,22.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
The datasets generated and analysed during the current study are available from the corresponding author on reasonable request.
References
Carlson, D. R. et al. Ultrafast electro-optic light with subcycle control. Science 361, 1358–1363 (2018).
Torres-Company, V. & Weiner, A. M. Optical frequency comb technology for ultra-broadband radio-frequency photonics. Laser Photonics Rev. 8, 368–393 (2014).
Ideguchi, T. et al. Coherent Raman spectro-imaging with laser frequency combs. Nature 502, 355–358 (2013).
Cundiff, S. T. & Weiner, A. M. Optical arbitrary waveform generation. Nat. Photonics 4, 760–766 (2010).
Obrzud, E., Lecomte, S. & Herr, T. Temporal solitons in microresonators driven by optical pulses. Nat. Photonics 11, 600–607 (2017).
Lundberg, L. et al. Phase-coherent lightwave communications with frequency combs. Nat. Commun. 11, 201 (2020).
Na, Y. et al. Ultrafast, sub-nanometre-precision and multifunctional time-of-flight detection. Nat. Photonics 14, 355–360 (2020).
McMahon, P. L. et al. A fully programmable 100-spin coherent Ising machine with all-to-all connections. Science 354, 614–617 (2016).
Suh, M.-G. et al. Searching for exoplanets using a microresonator astrocomb. Nat. Photonics 13, 25–30 (2019).
Gaeta, A. L., Lipson, M. & Kippenberg, T. J. Photonic-chip-based frequency combs. Nat. Photonics 13, 158–169 (2019).
Davenport, M. L., Liu, S. & Bowers, J. E. Integrated heterogeneous silicon/III–V mode-locked lasers. Photonics Res. 6, 468–478 (2018).
Wang, Z. et al. A III–V-on-Si ultra-dense comb laser. Light: Sci. Appl. 6, e16260–e16260 (2017).
Van Gasse, K. et al. Recent advances in the photonic integration of mode-locked laser diodes. IEEE Photonics Technol. Lett. 31, 1870–1873 (2019).
Kobayashi, T., Sueta, T., Cho, Y. & Matsuo, Y. High‐repetition‐rate optical pulse generator using a Fabry–Pérot electro‐optic modulator. Appl. Phys. Lett. 21, 341–343 (1972).
Bjorkholm, J. E., Turner, E. H. & Pearson, D. B. Conversion of CW light into a train of subnanosecond pulses using frequency modulation and the dispersion of a near‐resonant atomic vapor. Appl. Phys. Lett. 26, 564–566 (1975).
Giordmaine, J., Duguay, M. & Hansen, J. Compression of optical pulses. IEEE J. Quantum Electron. 4, 252–255 (1968).
Kolner, B. H. Electro-optic time lenses for shaping and imaging optical waveforms. In Broadband Optical Modulators (eds. Chen, A. & Murphy, E.) 427–454 (CRC Press, 2011).
Zhu, D. et al. Integrated photonics on thin-film lithium niobate. Adv. Opt. Photonics 13, 242–352 (2021).
Salem, R., Foster, M. A. & Gaeta, A. L. Application of space–time duality to ultrahigh-speed optical signal processing. Adv. Opt. Photonics 5, 274–317 (2013).
Trocha, P. et al. Ultrafast optical ranging using microresonator soliton frequency combs. Science 359, 887–891 (2018).
Karpiński, M., Jachura, M., Wright, L. J. & Smith, B. J. Bandwidth manipulation of quantum light by an electro-optic time lens. Nat. Photonics 11, 53–57 (2017).
Mittal, S. et al. Temporal and spectral manipulations of correlated photons using a time lens. Phys. Rev. A 96, 43807 (2017).
Jankowski, M. et al. Ultrabroadband nonlinear optics in nanophotonic periodically poled lithium niobate waveguides. Optica 7, 40–46 (2020).
Wang, P.-H. et al. Intracavity characterization of micro-comb generation in the single-soliton regime. Opt. Express 24, 10890–10897 (2016).
Zhang, M. et al. Broadband electro-optic frequency comb generation in a lithium niobate microring resonator. Nature 568, 373–377 (2019).
Beha, K. et al. Electronic synthesis of light. Optica 4, 406–411 (2017).
Metcalf, A. J., Torres-Company, V., Leaird, D. E. & Weiner, A. M. High-power broadly tunable electrooptic frequency comb generator. IEEE J. Sel. Top. Quantum Electron. 19, 231–236 (2013).
Yamamoto, T., Komukai, T., Suzuki, K. & Takada, A. Multicarrier light source with flattened spectrum using phase modulators and dispersion medium. J. Light. Technol. 27, 4297–4305 (2009).
Torres-Company, V., Lancis, J. & Andrés, P. Lossless equalization of frequency combs. Opt. Lett. 33, 1822–1824 (2008).
He, L. et al. Low-loss fiber-to-chip interface for lithium niobate photonic integrated circuits. Opt. Lett. 44, 2314–2317 (2019).
Ren, T. et al. An integrated low-voltage broadband lithium niobate phase modulator. IEEE Photonics Technol. Lett. 31, 889–892 (2019).
Ying, P. et al. Low-loss edge-coupling thin-film lithium niobate modulator with an efficient phase shifter. Opt. Lett. 46, 1478–1481 (2021).
Zhang, M., Wang, C., Cheng, R., Shams-Ansari, A. & Lončar, M. Monolithic ultra-high-Q lithium niobate microring resonator. Optica 4, 1536–1537 (2017).
Dudley, J. M., Genty, G. & Coen, S. Supercontinuum generation in photonic crystal fiber. Rev. Mod. Phys. 78, 1135–1184 (2006).
Shams-Ansari, A. et al. Thin-film lithium-niobate electro-optic platform for spectrally tailored dual-comb spectroscopy. Commun. Phys. 5, 88 (2022).
Li, J., Yi, X., Lee, H., Diddams, S. A. & Vahala, K. J. Electro-optical frequency division and stable microwave synthesis. Science 345, 309–313 (2014).
Anderson, M. H. et al. Photonic chip-based resonant supercontinuum via pulse-driven Kerr microresonator solitons. Optica 8, 771–779 (2021).
Cheng, R., Yu, M., Reimer, C., Zhang, M. & Lončar, M. On-chip Kerr broadening of an electro-optic pulse source on thin-film lithium niobate. In OSA Nonlinear Optics (eds Boyd, R. et al.) NF1A.5 (Optica, 2021); https://doi.org/10.1364/NLO.2021.NF1A.5.
Fortier, T. & Baumann, E. 20 years of developments in optical frequency comb technology and applications. Commun. Phys. 2, 153 (2019).
Zhou, J.-x. et al. Electro-optically switchable optical true delay lines of meter-scale lengths fabricated on lithium niobate on insulator using photolithography assisted chemo-mechanical etching. Chinese Phys. Lett. 37, 84201–084201 (2020).
Du, Z. et al. Silicon nitride chirped spiral Bragg grating with large group delay. APL Photonics 5, 101302 (2020).
Luke, K. et al. Wafer-scale low-loss lithium niobate photonic integrated circuits. Opt. Express 28, 24452–24458 (2020).
Choi, J. W. et al. High spectro-temporal compression on a nonlinear CMOS-chip. Light Sci. Appl. 10, 1–15 (2021).
Shams-Ansari, A. et al. Electrically pumped high power laser transmitter integrated on thin-film lithium niobate. Optica 9, 408–411 (2022).
Kharel, P., Reimer, C., Luke, K., He, L. & Zhang, M. Breaking voltage–bandwidth limits in integrated lithium niobate modulators using micro-structured electrodes. Optica 8, 357–363 (2021).
Kimble, H. J. The quantum internet. Nature 453, 1023–1030 (2008).
Yi, X., Yang, Q.-F., Yang, K. Y., Suh, M.-G. & Vahala, K. Soliton frequency comb at microwave rates in a high-Q silica microresonator. Optica 2, 1078 (2015).
Liu, J. et al. Photonic microwave generation in the X- and K-band using integrated soliton microcombs. Nat. Photonics 14, 486–491 (2020).
Saha, K. et al. Modelocking and femtosecond pulse generation in chip-based frequency combs. Opt. Express 21, 1335–1343 (2013).
Hermans, A. et al. High-pulse-energy III–V-on-silicon-nitride mode-locked laser. APL Photonics 6, 096102 (2021).
Parker, J. S., Bhardwaj, A., Binetti, P. R. A., Hung, Y. & Coldren, L. A. Monolithically integrated gain-flattened ring mode-locked laser for comb-line generation. IEEE Photonics Technol. Lett. 24, 131–133 (2012).
Moskalenko, V. et al. Record bandwidth and sub-picosecond pulses from a monolithically integrated mode-locked quantum well ring laser. Opt. Express 22, 28865 (2014).
Marsh, J. H. & Hou, L. Mode-locked laser diodes and their monolithic integration. IEEE J. Sel. Top. Quantum Electron. 23, 1100611 (2017).
Acknowledgements
This work is supported by the Defense Advanced Research Projects Agency (DARPA) under contract nos HR0011-20-C-0137, ARO W911NF2010248, ONR N00014-18-C-1043 and AFOSR (FA9550-19-1-0376 and FA9550-20-1-0297). Device fabrication was performed at the Harvard University Center for Nanoscale Systems. D.Z. acknowledges support by the Harvard Quantum Initiative post-doctoral fellowship. The research D.B. performed was supported by an appointment to the Intelligence Community Postdoctoral Research Fellowship Program at Harvard University, administered by Oak Ridge Institute for Science and Education through an interagency agreement between the US Department of Energy and the Office of the Director of National Intelligence. The views, opinions and/or findings expressed are those of the authors and should not be interpreted as representing the official views or policies of the Department of Defense or the US Government.
Author information
Authors and Affiliations
Contributions
M.Y. and Y.O. conceived the idea. M.Y. designed the chip with the help of D.B., C.R., R.C., P.K., L.H. and M.Z. D.B., C.R., R.C. and L.H. fabricated the devices. D.B. fabricated the grating device with the help of R.C. M.Y. carried out the measurement and analysed the data with the help of P.K., D.B., R.C., D.Z. and Y.O. M.Y. performed numerical simulations with the help of Y.O. H.R.G. and L.J. provided the DFB laser. L.S. and Y.H. helped with the fabrication. M.Y. wrote the manuscript with contribution from all authors. A.L.G. and M.L. supervised the project.
Corresponding author
Ethics declarations
Competing interests
C.R., P.K., L.H., M.Z. and M.L. are involved in developing lithium niobate technologies at HyperLight Corporation.
Peer review
Peer review information
Nature thanks Kenneth Kin-Yip Wong and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
Extended Data Fig. 1 The electro-optic response of the amplitude modulator on the time-lens chip.
The response is measured and calculated based on the S21 of the VNA and the calibration of the fast photodetector and radio-frequency (RF) cables, when the AM is biased at the quadrature point and under small signal modulation (top). The electro-optic S21 response of the AM indicates a 3-dB bandwidth of >45 GHz (bottom). Since the impedance mismatch results in a shape fall off in the response at near d.c. frequencies, the electro-optic S21 is often referenced to an RF frequency (2 GHz in our case). MZI: the Mach–Zehnder interferometer; AM: amplitude modulator; PM: phase modulator; EDFA: erbium-doped fibre amplifier; PD: photodetector; VNA: vector network analyser.
Extended Data Fig. 2 Characterization of the half-wave voltage (Vπ) of the ‘recycling’ phase modulator.
a, The experimental set-up for characterizing Vπ. The optical spectra are recorded as we sweep the RF frequency from 2 to 40 GHz at a step of 50 MHz. Vπ is extracted based on the pump power depletion in the optical spectrum, which is determined by the magnitude squared of the zeroth-order Bessel function |J0(β)|2, where β = πV/Vπ and V is the driven voltage. b, The extracted Vπ as a function of the RF frequency. c, The Vπ around 30.1 GHz, which shows the lowest Vπ of 2.5 V at 30.1 GHz. The 3-dB power bandwidth, corresponding to \(\sqrt{2}\,{V}_{{\rm{\pi }}}\), is 1.4 GHz (29.4 to 30.8 GHz). d, The frequency period of the Vπ (free spectral range = 2.84 GHz). It is determined by 1/τ, where τ is the optical delay time from the first ground-signal (GS) pair to the second GS pair in the phase modulator. e, The Vπ at each resonant RF frequency. In the experiment, we operate at 10.075 and 30.135 GHz, which correspond to 2.2 and 2.5 V, respectively. The results are in good agreement with the theory, which is based on the measured RF properties (index, loss, impedance) and optical group refractive index. OSA, optical spectral analyser.
Extended Data Fig. 3 Numerical simulation of the optical spectrum and the temporal pulses of the time-lens output.
The optical spectrum (left) shows a 10-dB optical bandwidth of 12.5 nm, and the temporal pulse shows a FWHM of 526 fs after compression (right), which is in excellent agreement with the experimental results in Fig. 2d at 30.135 GHz. In the simulation, the dispersion medium used is the single-mode fibre (SMF-28) with a length of 59 m. The temporal-domain behaviour shows a pulse compression factor of 31.5 before and after the dispersion operator. a.u., arbitrary units.
Extended Data Fig. 4 Autocorrelator trace of wavelength multiplexed pulse sources.
The experimental trace is obtained from the intensity autocorrelator when two pulse trains are simultaneously synthesized using two continuous-wave lasers at wavelengths of 1,543.75 and 1,556.83 nm, corresponding to Fig. 3a.
Extended Data Fig. 5 Four-wave mixing in HNLF using the pulse train as the pump and a continuous-wave laser as the probe.
a–e, Five optical spectra are recorded when the time-lens pulse train at 1,549 nm is sent to the HNLF along with a continuous-wave (CW) laser at wavelengths of 1,600, 1,620, 1,640, 1,660, and 1,680 nm (a–e), respectively. In addition to the nonlinear broadening around the pump wavelength, mini-comb spectra are generated around the wavelength of the continuous-wave laser due to the cross-phase modulation (XPM) from the high-peak-power pulses. Four-wave mixing (FWM) between the pulse pump and the continuous-wave laser probes results in broad comb spectra at the idler wavelength on the lower wavelength side of the pump. The broadest conversion bandwidth is around 40 nm when the continuous-wave laser is at 1,640 nm.
Extended Data Fig. 6 Stability measurement of the 30-GHz electro-optic comb spectrum over 3.5 h at a time step of 30 s.
Both power and the optical spectrum are recorded. a, The output comb power (top) and the standard deviation of the central 20 comb lines’ power (bottom) as a function of time. The output comb power features a periodic variation every 20 min (dips) due to the slow and periodic mechanical misalignment between the lensed fibre and chip facets. The stable operation of the optical spectrum on chip is verified by excellent spectral flatness during this time period as well as the flat-top optical spectra (b) at each randomly sampled point labelled in a.
Extended Data Fig. 7 Characterization of the on-chip chirped Bragg grating.
a, Experimental set-up. The device is measured using a tunable continuous-wave laser and a circulator. b,c, The reflection and transmission spectrum of a 2.5-mm Bragg grating. The grating 3-dB bandwidth is 1,544–1,573 nm, which covers the optical bandwidth of the time lens output in Fig. 2 (shaded). The transmission within the bandwidth is limited by our detector noise floor. d, The optical spectrum of the time lens after reflection from the grating. The spectrum in Fig. 2 was used as an input to the grating. e, The extracted fringe period from b and the group delay as a function of wavelength. The fringe is a result of the Fabry–Pérot cavity effect due to the reflection between input facet and grating. The slope of the group delay indicates a total dispersion value of 1.62 ps nm−1. f, The insertion loss as a function of wavelength, extracted from the reflection spectrum and laser input power spectrum. Since the wavelength can be mapped to the physical propagation distance in the grating device, the propagation loss is fitted to be 0.033 dB mm−1.
Supplementary information
Supplementary Information
The file contains information of the supplementary methods, including the design and characterization of the waveguide crossing (Supplementary Fig. 1) and inverse taper (Supplementary Fig. 2) in the time-lens chip, the time-lens pump spectrum for the four-wave-mixing experiment in a highly nonlinear fibre (Supplementary Fig. 3), and the characterization of the dispersion-engineered waveguide for pulse compression (Supplementary Figs. 4 and 5). There are five Supplementary figures in total.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Yu, M., Barton III, D., Cheng, R. et al. Integrated femtosecond pulse generator on thin-film lithium niobate. Nature 612, 252–258 (2022). https://doi.org/10.1038/s41586-022-05345-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41586-022-05345-1
This article is cited by
-
Fast-reconfigurable frequency comb generation based on AlGaAsOI waveguide with electro-optic time lens
Communications Physics (2024)
-
Integrated frequency-modulated optical parametric oscillator
Nature (2024)
-
A Review of a Spectral Domain Interferometer with a Frequency Comb for Length Measurement
International Journal of Precision Engineering and Manufacturing (2024)
-
Ultrafast laser-induced self-organized nanostructuring in transparent dielectrics: fundamentals and applications
PhotoniX (2023)
-
A power-efficient integrated lithium niobate electro-optic comb generator
Communications Physics (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.