Research Highlights

Nature 462, 393 (26 November 2009) | doi:10.1038/462393c; Published online 25 November 2009

Materials: Healed steel

Materials: Healed steel

WILEY-VCH

Adv. Mater. doi:10.1002/adma.200902465 (2009)

A polymer coating can enable damaged steel to 'heal' itself, according to Jeong-Ho Park and Paul Braun of the University of Illinois at Urbana-Champaign.

The coating consists of a mat of thin fibres spun using a technique called electrospinning, which creates fibres from a liquid by pulling it through an electric field. Trapped inside pockets along the fibres are bubbles of one or another of two liquid polysiloxane-based healing agents.

When these fibres are electrospun onto a steel surface and that steel surface is cut, the two liquids burst out (pictured) and mix together in the crack formed during damage. The liquids then polymerize and fill in the gap with a solid substance. In the team's experiments, the healed steel didn't rust for three months, even after initially sitting in salt water for five days.


Readers' Comments

If you find something abusive or inappropriate or which does not otherwise comply with our Terms and Conditions or Community Guidelines, please select the relevant 'Report this comment' link.

There are currently no comments.

Add your own comment

This is a public forum. Please keep to our Community Guidelines. You can be controversial, but please don't get personal or offensive and do keep it brief. Remember our threads are for feedback and discussion - not for publishing papers, press releases or advertisements.

You need to be registered with Nature and agree to our Community Guidelines to leave a comment. Please log in or register as a new user. You will be re-directed back to this page.