Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Preparation and characterization of graphene oxide paper

Abstract

Free-standing paper-like or foil-like materials are an integral part of our technological society. Their uses include protective layers, chemical filters, components of electrical batteries or supercapacitors, adhesive layers, electronic or optoelectronic components, and molecular storage1. Inorganic ‘paper-like’ materials based on nanoscale components such as exfoliated vermiculite or mica platelets have been intensively studied2,3 and commercialized as protective coatings, high-temperature binders, dielectric barriers and gas-impermeable membranes4,5. Carbon-based flexible graphite foils5,6,7 composed of stacked platelets of expanded graphite have long been used8,9 in packing and gasketing applications because of their chemical resistivity against most media, superior sealability over a wide temperature range, and impermeability to fluids. The discovery of carbon nanotubes brought about bucky paper10, which displays excellent mechanical and electrical properties that make it potentially suitable for fuel cell and structural composite applications11,12,13,14. Here we report the preparation and characterization of graphene oxide paper, a free-standing carbon-based membrane material made by flow-directed assembly of individual graphene oxide sheets. This new material outperforms many other paper-like materials in stiffness and strength. Its combination of macroscopic flexibility and stiffness is a result of a unique interlocking-tile arrangement of the nanoscale graphene oxide sheets.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Morphology and structure of graphene oxide paper.
Figure 2: Examples of the tensile behaviour for a few representative graphene oxide paper samples.
Figure 3: Comparison of tensile strength σ and modulus E for a set of thin paper-like materials.
Figure 4: The results of bending experiments for samples of graphene oxide paper with different thicknesses t.

Similar content being viewed by others

References

  1. Pitkethly, M. J. Nanomaterials—the driving force. Nanotoday 7, 20–29 (2004)

    Google Scholar 

  2. Ballard, D. G. H. & Rideal, G. R. Flexible inorganic films and coatings. J. Mater. Sci. 18, 545–561 (1983)

    Article  ADS  CAS  Google Scholar 

  3. Kellar, J. J. Functional Fillers and Nanoscale Minerals: New Markets/ New Horizons (Society for Mining, Metallurgy and Exploration, Littleton, Colorado, 2006)

    Google Scholar 

  4. US. Samicawww.ussamica.com〉 (Isovolta Inc./US Samica, Rutland, Vermont, 2007)

  5. Dowell, M. B. & Howard, R. A. Tensile and compressive properties of flexible graphite foils. Carbon 24, 311–323 (1986)

    Article  Google Scholar 

  6. Leng, Y., Gu, J., Cao, W. & Zhang, T. Y. Influences of density and flake size on the mechanical properties of flexible graphite. Carbon 36, 875–881 (1998)

    Article  CAS  Google Scholar 

  7. Reynolds, R. A. & Greinke, R. A. Influence of expansion volume of intercalated graphite on tensile properties of flexible graphite. Carbon 39 (3). 479–481 (2001)

    Article  Google Scholar 

  8. Grafoil. 〈http://www.graftechaet.com/Home/Brands/GRAFOIL.aspx〉 (GrafTech International Inc., Lakewood, Ohio, copyright, 2005)

  9. Sigraflex. 〈http://www.sglcarbon.com/sgl_t/expanded/markets/energy/power_plants.html〉 (SGL Carbon AG, Wiesbaden, Germany, copyright 2000–, 2007)

  10. Liu, J. et al. Fullerene pipes. Science 280, 1253–1256 (1998)

    Article  ADS  CAS  Google Scholar 

  11. Baughman, R. H. et al. Carbon nanotube actuators. Science 284, 1340–1344 (1999)

    Article  ADS  CAS  Google Scholar 

  12. Hennrich, F. et al. Preparation, characterization and applications of free-standing single walled carbon nanotube thin films. Phys. Chem. Chem. Phys. 4, 2273–2277 (2002)

    Article  CAS  Google Scholar 

  13. Coleman, J. N. et al. Improving the mechanical properties of single-walled carbon nanotube sheets by intercalation of polymeric adhesives. Appl. Phys. Lett. 82, 1682–1684 (2003)

    Article  ADS  CAS  Google Scholar 

  14. Berhan, L. et al. Mechanical properties of nanotube sheets: Alterations in joint morphology and achievable moduli in manufacturable materials. J. Appl. Phys. 95, 4335–4345 (2004)

    Article  ADS  CAS  Google Scholar 

  15. Titelman, G. I. et al. Characteristics and microstructure of aqueous colloidal dispersions of graphite oxide. Carbon 43, 641–649 (2005)

    Article  CAS  Google Scholar 

  16. Stankovich, S. et al. Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate). J. Mater. Chem. 16, 155–158 (2006)

    Article  CAS  Google Scholar 

  17. Stankovich, S. et al. Graphene-based composite materials. Nature 442, 282–286 (2006)

    Article  ADS  CAS  Google Scholar 

  18. Stankovich, S. et al. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide. Carbon. 45, 1558–1564 (2007)

    Article  CAS  Google Scholar 

  19. Scholz, W. & Boehm, H. P. Untersuchungen am graphitoxid. VI. Betrachtungen zur struktur des graphitoxids. Z. Anorg. Allg. Chem. 369, 327–340 (1969)

    Article  CAS  Google Scholar 

  20. Lerf, A. et al. Hydration behavior and dynamics of water molecules in graphite oxide. J. Phys. Chem. Solids 67, 1106–1110 (2006)

    Article  ADS  CAS  Google Scholar 

  21. Bartram, S. F. in Handbook of X-rays (ed. Kaelble, E. F.) 17.1–17 (McGraw-Hill, New York, 1967)

    Google Scholar 

  22. Zhang, X. F., Sreekumar, T. V., Liu, T. & Kumar, S. Properties and structure of nitric acid oxidized single wall carbon nanotube films. J. Phys. Chem. B 108, 16435–16440 (2004)

    Article  CAS  Google Scholar 

  23. Ward, I. M. Mechanical Properties of Solid Polymers Ch. 11 329–398 (Wiley, Chichester/New York, 1983)

    Google Scholar 

  24. Soule, D. E. & Nezbeda, C. W. Direct basal-plane shear in single-crystal graphite. J. Appl. Phys. 39, 5122–5139 (1968)

    Article  ADS  CAS  Google Scholar 

  25. Tang, Z., Kotov, N., Magonov, S. & Ozturk, B. Nanostructured artificial nacre. Nature Mater. 2, 413–418 (2003)

    Article  ADS  CAS  Google Scholar 

  26. Alava, M. & Niskanen, K. The physics of paper. Rep. Prog. Phys. 69, 669–723 (2006)

    Article  ADS  Google Scholar 

  27. Timoshenko, S. P. & Goodier, J. N. Theory of Elasticity (McGraw-Hill, New York, 1970)

    MATH  Google Scholar 

  28. Hummers, W. S. & Offeman, R. E. Preparation of graphite oxide. J. Am. Chem. Soc. 80, 1339 (1958)

    Article  CAS  Google Scholar 

Download references

Acknowledgements

We appreciate support from NASA through the University Research, Engineering and Technology Institute (URETI) on Bio-inspired Materials (BiMat), and from the NSF. This work made use of X-ray facilities supported by the MRSEC programme of the National Science Foundation at the Materials Research Center of Northwestern University, and the X23B beamline of the National Synchrotron Light Source supported by the US Department of Energy. We thank I. M. Daniel for the use of his mechanical testing instruments, and A. L. Ruoff for commenting on an earlier version of this manuscript.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Rodney S. Ruoff.

Ethics declarations

Competing interests

Reprints and permissions information is available at www.nature.com/reprints. The authors declare no competing financial interests.

Supplementary information

Supplementary Information

This file contains Supplementary Discussion and Supplementary Data including three Supplementary Figures with Legends, Supplementary Table and additional references. (PDF 670 kb)

Rights and permissions

Reprints and permissions

About this article

Cite this article

Dikin, D., Stankovich, S., Zimney, E. et al. Preparation and characterization of graphene oxide paper. Nature 448, 457–460 (2007). https://doi.org/10.1038/nature06016

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nature06016

This article is cited by

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing