Access

Letter

Nature 440, 508-511 (23 March 2006) | doi:10.1038/nature04594; Received 7 November 2005; Accepted 18 January 2006

Open Innovation Challenges

naturejobs

Channel plasmon subwavelength waveguide components including interferometers and ring resonators

Sergey I. Bozhevolnyi1, Valentyn S. Volkov1, Eloïse Devaux2, Jean-Yves Laluet2 & Thomas W. Ebbesen2

  1. Department of Physics and Nanotechnology, Aalborg University, Skjernvej 4A, DK-9220 Aalborg Øst, Denmark
  2. ISIS, CNRS UMR 7006, Université Louis Pasteur, 8 allée Monge, BP 70028, 67083 Strasbourg, France

Correspondence to: Sergey I. Bozhevolnyi1 Correspondence and requests for materials should be addressed to S.I.B. (Email: sergey@physics.aau.dk).

Top

Photonic components are superior to electronic ones in terms of operational bandwidth, but the diffraction limit of light poses a significant challenge to the miniaturization and high-density integration of optical circuits. The main approach to circumvent this problem is to exploit the hybrid nature of surface plasmon polaritons (SPPs), which are light waves coupled to free electron oscillations in a metal1, 2 that can be laterally confined below the diffraction limit using subwavelength metal structures3, 4, 5, 6, 7, 8. However, the simultaneous realization of strong confinement and a propagation loss sufficiently low for practical applications has long been out of reach. Channel SPP modes—channel plasmon polaritons (CPPs)8—are electromagnetic waves that are bound to and propagate along the bottom of V-shaped grooves milled in a metal film. They are expected to exhibit useful subwavelength confinement, relatively low propagation loss9, single-mode operation10 and efficient transmission around sharp bends11. Our previous experiments showed that CPPs do exist and that they propagate over tens of micrometres along straight subwavelength grooves12. Here we report the design, fabrication and characterization of CPP-based subwavelength waveguide components operating at telecom wavelengths: Y-splitters, Mach–Zehnder interferometers and waveguide–ring resonators. We demonstrate that CPP guides can indeed be used for large-angle bending and splitting of radiation, thereby enabling the realization of ultracompact plasmonic components and paving the way for a new class of integrated optical circuits.

  1. Department of Physics and Nanotechnology, Aalborg University, Skjernvej 4A, DK-9220 Aalborg Øst, Denmark
  2. ISIS, CNRS UMR 7006, Université Louis Pasteur, 8 allée Monge, BP 70028, 67083 Strasbourg, France

Correspondence to: Sergey I. Bozhevolnyi1 Correspondence and requests for materials should be addressed to S.I.B. (Email: sergey@physics.aau.dk).

MORE ARTICLES LIKE THIS

These links to content published by NPG are automatically generated.

NEWS AND VIEWS

Solid-state physics Light at the end of the channel

Nature News and Views (23 Mar 2006)

Plasmonics Clear for launch

Nature Physics News and Views (01 May 2007)

See all 5 matches for News And Views