Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Rotational actuators based on carbon nanotubes

Abstract

Nanostructures are of great interest not only for their basic scientific richness, but also because they have the potential to revolutionize critical technologies. The miniaturization of electronic devices over the past century has profoundly affected human communication, computation, manufacturing and transportation systems. True molecular-scale electronic devices are now emerging that set the stage for future integrated nanoelectronics1. Recently, there have been dramatic parallel advances in the miniaturization of mechanical and electromechanical devices2. Commercial microelectromechanical systems now reach the submillimetre to micrometre size scale, and there is intense interest in the creation of next-generation synthetic nanometre-scale electromechanical systems3,4. We report on the construction and successful operation of a fully synthetic nanoscale electromechanical actuator incorporating a rotatable metal plate, with a multi-walled carbon nanotube serving as the key motion-enabling element.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Integrated synthetic NEMS actuator.
Figure 2: Series of SEM images showing the actuator rotor plate at different angular displacements.
Figure 3: Two SEM images captured from a video recording of an a.c.-voltage-driven actuator ‘flipping’ between the extremal horizontal positions (90° and 270°).

Similar content being viewed by others

References

  1. Tour, J. M. et al. Recent advances in molecular scale electronics. Ann. NY Acad. Sci. 852, 197–204 (1998)

    Article  ADS  CAS  Google Scholar 

  2. Judy, J. W. Microelectromechanical system (MEMS): Fabrication, design and applications. Smart Mater. Struct. 10, 1115–1134 (2001)

    Article  ADS  Google Scholar 

  3. Craighead, H. G. Nanoelectromechanical systems. Science 290, 1532–1535 (2000)

    Article  ADS  CAS  Google Scholar 

  4. Roukes, M. L. in Tech. Digest of the 2000 Solid-State Sensor and Actuator Workshop (eds Bousse, L. & Schmidt, M.) 367–376 (Transducer Research Foundation, Cleveland, 2000)

    Google Scholar 

  5. Carr, D. W., Evoy, S., Sekaric, L., Craighead, H. G. & Parpia, J. M. Measurement of mechanical resonance and losses in nanometer scale silicon wires. Appl. Phys. Lett. 75, 920–922 (1999)

    Article  ADS  CAS  Google Scholar 

  6. Lifshitz, R. & Roukes, M. L. Thermoelastic damping in micro- and nanomechanical systems. Phys. Rev. B 61, 5600–5609 (2000)

    Article  ADS  CAS  Google Scholar 

  7. Iijima, S. Helical microtubules of graphitic carbon. Nature 354, 56–58 (1991)

    Article  ADS  CAS  Google Scholar 

  8. Chopra, N. G. et al. Boron nitride nanotubes. Science 269, 966–967 (1995)

    Article  ADS  CAS  Google Scholar 

  9. Charlier, J.-C. & Michenaud, J.-P. Energetics of multilayered carbon tubules. Phys. Rev. Lett. 70, 1858–1861 (1993)

    Article  ADS  CAS  Google Scholar 

  10. Kolmogorov, A. N. & Crespi, V. H. Smoothest bearings: Interlayer sliding in multiwalled carbon nanotubes. Phys. Rev. Lett. 85, 4727–4730 (2000)

    Article  ADS  CAS  Google Scholar 

  11. Ebbesen, T. W. & Ajayan, P. M. Large-scale synthesis of carbon nanotubes. Nature 358, 220–222 (1992)

    Article  ADS  CAS  Google Scholar 

  12. Tans, S. J. et al. Individual single-wall carbon nanotubes as quantum wires. Nature 386, 474–477 (1997)

    Article  ADS  CAS  Google Scholar 

  13. Bockrath, M. et al. Single electron transport in ropes of carbon nanotubes. Science 275, 1922–1925 (1997)

    Article  CAS  Google Scholar 

  14. Yakobson, B. I., Brabec, C. J. & Bernholc, J. Nanomechanics of carbon tubes: Instabilities beyond linear response. Phys. Rev. Lett. 76, 2511–2514 (1996)

    Article  ADS  CAS  Google Scholar 

  15. Williams, P. A. et al. Torsional response and stiffening of individual multiwalled carbon nanotubes. Phys. Rev. Lett. 89, 255202 (2002)

    Article  Google Scholar 

  16. Williams, P. A. et al. Fabrication of nanometer-scale mechanical devices incorporating multiwalled carbon nanotubes as torsional springs. Appl. Phys. Lett. 82, 805–807 (2003)

    Article  ADS  CAS  Google Scholar 

  17. Cumings, J. & Zettl, A. Low-friction nanoscale linear bearing realized from multi-walled carbon nanotubes. Science 289, 602–604 (2000)

    Article  ADS  CAS  Google Scholar 

  18. Yu, M.-F., Yakobson, B. I. & Ruoff, R. S. Controlled sliding and pullout of nested shells in individual multiwalled carbon nanotubes. J. Phys. Chem. B 104, 8764–8767 (2000)

    Article  CAS  Google Scholar 

  19. Cumings, J., Collins, P. G. & Zettl, A. Peeling and sharpening of multiwall nanotubes. Nature 406, 586 (2000)

    Article  ADS  CAS  Google Scholar 

  20. Collins, P. G., Arnold, M. S. & Avouris, P. Engineering carbon nanotubes and nanotube circuits using electrical breakdown. Science 292, 706–709 (2001)

    Article  ADS  CAS  Google Scholar 

  21. Poncharal, P., Wang, Z. L., Ugarte, D. & de Heer, W. A. Electrostatic deflections and electromechanical resonances of carbon nanotubes. Science 283, 1513–1516 (1999)

    Article  ADS  CAS  Google Scholar 

Download references

Acknowledgements

We thank N. Bodzin for assistance with graphics. This research was supported in part by the National Science Foundation, and by the Director, Office of Energy Research, Office of Basic Energy Sciences, Materials Sciences Division of the US Department of Energy.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. Zettl.

Ethics declarations

Competing interests

The authors declare that they have no competing financial interests.

Supplementary information

41586_2003_BFnature01823_MOESM1_ESM.mpg

Supplementary Movie 1: These first three movie files were captured directly from an SEM. They show three different frequencies of nanoactuator oscillation. (MPG 5521 kb)

Supplementary Movie 2 (MOV 8933 kb)

Supplementary Movie 3 (MOV 10035 kb)

41586_2003_BFnature01823_MOESM4_ESM.gif

Supplementary Animation: portrays an animated image of the rotor moving through various positions in a rotation. (GIF 1002 kb)

Rights and permissions

Reprints and permissions

About this article

Cite this article

Fennimore, A., Yuzvinsky, T., Han, WQ. et al. Rotational actuators based on carbon nanotubes. Nature 424, 408–410 (2003). https://doi.org/10.1038/nature01823

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nature01823

This article is cited by

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing