Functional characterization of individual cells within heterogeneous tissue preparations is challenging. Here, we report the development of a versatile imaging method that assesses single cell responses of various endpoints in real time, while identifying the individual cell types. Endpoints that can be measured include (but are not limited to) ionic flux (calcium, sodium, potassium and hydrogen), metabolic responsiveness (NAD(P)H, mitochondrial membrane potential), and signal transduction (H2O2 and cAMP). Subsequent to fluorescent imaging, identification of cell types using immunohistochemistry allows for mapping of cell type to their respective functional real time responses. To validate the utility of this method, NAD(P)H responses to glucose of islet alpha versus beta cells generated from dispersed pancreatic islets, followed by the construction of frequency distributions characterizing the variability in the magnitude of each individual cell responses were compared. As expected, no overlap between the glucose response frequency distributions for beta cells versus alpha cells was observed, thereby establishing both the high degree of fidelity and low rate of both false-negatives and false-positives in this approach. This novel method has the ability not only to resolve single cell level functional differences between cell types, but also to characterize functional heterogeneity within a given cell type.
A need for functional assessment of heterogeneous mixture of cells
A common challenge in cell biology is the need to assess the functional attributes of isolated primary cells in heterogeneous cell mixtures. One example involves studies of directed differentiation of stem cells toward a given cell type of interest. Differences in cell fate specification, inefficient transitions of a given cell phenotype through specific stages of development, and intrinsic heterogeneity existing within populations of progenitor cells1 can each result in complex admixtures of many distinct cell types, and identifying and characterizing individual cell types in that mixture can be challenging. Other examples include the need to identify and characterize cells isolated from primary tissues such as liver2,3, pancreatic islets4,5, brain6, cardiomyocytes7 or blood leukocytes8. Assessing cellular differences in drug toxicity within a given tissue preparation can also be confounded if, for example, a sparsely represented cell type, but not the major parenchymal cell type, is targeted and eliminated by the drug. The ability to discriminate between these selective drug effects requires high-throughput cellular analysis methods that are not currently available.
These examples highlight instances in which measures of bulk cell response are uninformative with respect to cell-specific behavior. Even homogeneous cell mixtures can be characterized by wide variability in individual cellular responses, the nature of which may be physiologically or pathophysiologically important to characterize9. Such challenges can be addressed through an approach to single cell functional assessment that permits statistical analysis of the distributions of the responses. Achieving this goal, however, requires either that the cells are purified prior to study or that steps are taken beforehand to enable specific cell types to be identified within a complex cell mixture.
Limitations of current approaches
One approach to addressing these challenges is to sort and purify cells prior to study using Fluorescence Activated Cell Sorting (FACS)10, but this separation method can adversely affect cell function and viability. Specifically, fluid shear stress on cells during FACS separation can be both variable and much greater than occurs in vivo, causing variable impairment of both cell viability11,12 and cell functions such as gene expression13 and cell cycle14. Detection of the expression of genetic markers of adult pancreatic cell types typically involves cell fixation15. Furthermore, the binding of fluorescent antibodies to cell-specific surface markers that enables the separation process can inadvertently stimulate target cells, thereby affecting subsequent analysis. Finally, when the proportion of a given cell type in a cell mixture is low, both the yield and purity of separated cells can be low16, increasing the likelihood of contamination by unwanted cells. Alternative approaches include strategies to genetically tag cells of interest with a fluorescent marker that allows for simultaneous identification of the cell type while performing the real time imaging analysis17. Often, this is an effective solution, but the process of labeling cells may affect their function, takes a number of days before the probes are expressed and it is not always possible to efficiently label primary tissue.
A novel systematic approach: Combining cell identification with single-cell, real-time analysis
Based on the above considerations, we sought to develop a method that 1) identifies cell type after functional analysis (such that the identification procedure does not affect analysis of cell function), and 2) enables a high throughput approach to cellular analysis such that functional data is obtained on sufficient numbers of rare cell types. In addition, we strove to produce a method that was simple to implement, relied on readily available imaging equipment, and could be carried out on tissue soon after harvesting so that impact of the method would be widespread. These goals were achieved through an approach in which cell location is preserved and mapped following functional analysis by patterning a micro-scale numeric grid on the bottom of the cell chamber. We then used immunohistochemical staining to link the response of individual cells to its cellular identity, thereby circumventing the need for their purification. To measure the response of a large number of cells in real time, such that frequency distributions can be generated and analyzed with high statistical resolution, we employed automated stage control of the fluorescent imaging microscope in the x-y plane.
Real-time fluorescent imaging endpoints that can be utilized by our method include but are not limited to measures of intracellular levels of ions (e.g., calcium18, sodium18, potassium, hydrogen18 and zinc), metabolic function (e.g., NAD(P)H19 and mitochondrial membrane potential), and signal transduction molecules such as cAMP18 or reactive oxygen species. To illustrate and validate the method, we endeavored to compare glucose-stimulated NAD(P)H responses, and also glucose-stimulated intracellular calcium response, by alpha vs. beta cells derived from dispersed pancreatic islets. Pancreatic alpha cells, which synthesize and secrete the hormone glucagon, constitute a relatively rare cell type comprising 15–20% of total islet cells20, whereas beta cells constitute a majority of islet cells. Alpha and beta cells have distinctly different functional responses to changes glucose, and how alpha cell mitochondria respond to changes in glucose is not well-established21,22,23, making it a good test case for evaluating the method. The fluorescent signal detected for NAD(P)H includes contributions from both NADH and NADPH, but the signal is dominated by mitochondrial NADH (which reflects the balance between NADH generated by glycolytic/TCA cycle and its oxidation in the electron transport chain)24. In this report we demonstrate the successful and reproducible functional phenotyping of rare cell types within a complex cell mixture using single cell imaging analysis on a platform that is amenable to automation and high throughput applications and will be readily usable by cell biologists. This approach, therefore, overcomes several limitations associated with conventional analysis of cell preparations isolated by FACS.
Chemicals and solutions
Perifusion analyses were performed using Krebs Ringer bicarbonate solution (KRB) containing 0.1% BSA as done previously25, except that 5 mM was substituted for 25 mM sodium bicarbonate. Glucose, streptozotocin, carbonyl cyanide 4-(trifluoromethoxy)phenylhydrazone (FCCP), and potassium cyanide (KCN) were all purchased from Sigma-Aldrich (St. Louis, MO). Culture media (RPMI-1640) was supplied by ThermoFisher Scientific (Waltham, MA), and heat-inactivated fetal bovine serum (FBS) was supplied by Atlanta Biologicals (Flowery Branch, GA).
Isolation and culture of rat islets
Islets were harvested from Sprague-Dawley male rats weighing approximately 250 g (Charles River, Wilmington, MA) that were anesthetized by intraperitoneal injection of sodium pentobarbital (35 mg/230 g rat). Approval for all surgical procedures was obtained from the Institutional Animal Care and Use Committee at the University of Washington, and all experiments were performed according to the written regulations and guidelines. Preparation and purification of islets were carried out as previously described26,27. Islets were cultured overnight prior to the experiment in culture media supplemented with 10% fetal bovine serum at 37 °C.
INS-1 832/13 cells (passage number 52 to 74) (henceforth referred to as INS-1 cells) were kindly provided by Dr. Christopher Newgard and were cultured in RPMI-1640 (Gibco, Grand Island, NY) supplemented with 2 mM L-Glutamine, 1 mM Pyruvate, 50 μM Beta-mercaptoethanol, 20 mM HEPES, heat-inactivated fetal bovine serum (10%) (Atlanta Biologicals, Lawrenceville, GA) and 1% penicillin/streptomycin as previously described28.
Patterning the grid on the perifusion cover slip
Positioned as shown in Fig. 1, a grid of 17,689 squares measuring 150 microns per side was patterned onto one side of a 40 mm diameter perifusion coverslip supplied by Bioptechs (Butler, PA) in a microfabrication facility. Each square was dual-labeled with a combination of numbers and letters (25 × 15 microns) to give each square a unique identifier. The size of the box was set so that its perimeter was just inside the visible region of an image using a 40 × objective. The design of the coverslip was generated using CAD software (Layout Editor, juspertor UG), and a 5” AZ resist pre-coated Chrome mask was exposed using a laser writing tool (Heidelberg μPG101, Heidelberg Instruments, Germany), developed and subjected to Chrome etch to achieve the desired pattern. Coverslips were subsequently cleaned using isopropanol alcohol prior to the fabrication, spun coated with photoresist (AZ 1512, MicroChemicals, Germany) at 3000 rpm to yield a film thickness of 1 micron (6808P Spin Coater, Specialty Coating Systems, Indianapolis, IN), and soft-baked at 100 °C for 60 s before exposure to a broad wavelength aligner for 2 seconds with intensity of 21.6 mW/cm2 at 405 nm using the fabricated mask (ABM, Scotts Valley, CA). The coverslips were then developed and residues removed by a plasma ashing process (Trion Phantom Reactive Ion Etcher, Trion Technology, Tempe, AZ). The Chrome (approximately 50 nm) was evaporated onto the coverslip, (SEC-600, CHA Industries, Fremont, CA) and finally the lift-off process was performed in acetone by sonicating for 60 second.
Dispersion of islets to single cells and plating them on perifusion cover slips
The day prior to their study, dispersed islet cells were prepared from isolated islets by gentle trituration of islets suspended in a phosphate buffered saline solution containing 0.125% trypsin/0.05 mM EDTA29. The islet suspension was triturated every minute (using a 1 mL pipet) until the islets were visibly dispersed (about 5–10 minutes), at which time the trypsin was deactivated by the addition of heat-inactivated fetal bovine serum. The dispersed islet cells were then seeded on to Bioptechs cover slips pre-coated with Matrigel (Becton Dickinson, Billerica, MA) on the reverse side of the etched grid, and allowed to attach for 1 h. Pre-coating of coverslips with Matrigel was done carried out 24 hours prior to use as follows. Matrigel was diluted 1:30 in PBS (containing no calcium or magnesium) and 200 μL were pipetted on to the cover slip. The cover slip was covered and allowed to set at 4 degrees C overnight. Single cells harvested from about 100 islets were seeded onto each coverslip, and incubated overnight in culture media supplemented with heat-inactivated fetal bovine serum (10%) at 37 °C.
Fluidics system for maintaining cells in the fluorescence microscope
The perifusion chamber shown in Fig. 1 was used for maintaining and imaging plated islet cells. In place of the silicon lower gasket supplied by Bioptechs, gaskets were cut from Parafilm. A rectangular section was cut from a piece of Parafilm cut into a circle (d = 40 mm) so that the void created when the gasket was placed into the perifusion dish was fed and drained by the inlet and outlet ports. The system was readied for the experiment by first placing the upper gasket, the microaqueduct slide, and the lower gasket on to the FCS2 chamber base, which was then placed upside-down on the stage of a Nikon Eclipse Ti inverted microscope. This is depicted by a series of images included in Supplemental Information (Supplemental Fig. 1). The KRB solution (containing 5 mM sodium bicarbonate) was pumped through the inlet port, driven by a Masterflex L/S peristaltic pump (Model 7519-20, Cole Parmer, Vernon Hills, IL), for approximately 5 min until the void space in the lower gasket was filled. The pump was stopped, and the perifusion coverslip plated with islet cells was placed face down on to the lower gasket. The pieces thus assembled were secured in place with the FSC2 self-locking bracket. The assembly was then inverted so that the etched coverslip was contiguous with a 40 × oil immersion fluorescent objective, and placed within the stage opening. The pump was then turned on and set to a flow rate of 150 μL/min throughout the study, as described previously30.
High throughput imaging of NAD(P)H and calcium
Fluorescence imaging of NAD(P)H in dispersed islet cells was performed with emission detected at 460 nm by a CoolSnap HQ2 CCD camera (Photometrics, Tucson, AZ) through a 40 × Super Fluor Nikon objective (DIC H/N2) during excitation at 360 nm via a Xenon lamp (Lambda LS-1620, Sutter Instrument Company, Novato, CA). NAD(P)H fluorescence integration time was 200 msec. The time sequence for data collection was thus, for a given region a fluorescence image was obtained, and the stage advanced to the next region where its fluorescence image was obtained and so on until all the regions specified were assessed. In this way, a fluorescence intensity was obtained for each cell for a given time point. This sequence was repeated for each time point, in this case every 120 seconds. With an acquisition time of 200 msec, the stage is capable of advancement to the next region at a maximal rate of ~3/second for a total of 180 regions/minute. With ~20 cells visible per region, the maximal rate of analysis is ~7200 cells/min in real time. The software package Elements® (Nikon) was used to drive the data acquisition and movement of the stage controller. However, the program is unable to show data in real time while multiple positions are being assessed. To circumvent this problem, cell surface regions to be quantified were delineated manually for each visible region prior to real time analysis. Thus for each region scanned, Elements® determined the fluorescence intensity for all delineated surface regions whether the cells were contained in that region or not. The data was exported to Excel (Microsoft) in real time where a customized “macro” binned the data for each actual cell residing in that window. At the completion of each protocol, the steady-state levels of relative fluorescence (RFU) during exposure of KCN and subsequently FCCP were measured and this data was used to normalize the RFU data. The normalization of the NAD(P)H signal was as a percent of RFUFCCP and RFUKCN, defined as 0 and 100% respectively for each cell31. The imaging of calcium, after loading cells with the calcium-sensitive dye FURA-1, was carried out as previously described32.
Immunohistochemical staining and imaging of cells on cover slip
Subsequent to real time imaging, the coverslip was removed from the flow chamber and submerged in 2% paraformaldehyde for 16 h. Immunohistochemical staining was carried out for insulin and glucagon using mouse anti-insulin monoclonal antibody CC9C10 (ATCC, Manassas, VA) and mouse anti-glucagon monoclonal antibody K79b810 (Abcam, Cambridge, UK). Antibody CC9C10 was directly labeled with Alexa Fluor 568 dye (excitation 578 nm and emission 603 nm) (Thermo Fisher Scientific, Waltham MA) and the glucagon antibody was visualized by use of goat anti-mouse IgG-FITC (excitation 494 nm and emission 522 nm) (Bio-Rad Laboratories, Hercules, CA). Cells were first analyzed for glucagon-positive cells, followed by staining for insulin-positive cells to avoid binding of the secondary antibody to the CC9C10 antibody using the same Nikon Eclipse Ti inverted microscope as used for real-time imaging.
NAD(P)H responses were represented as the minimum percent changes of steady-state NAD(P)H in response to either increasing from 3 to 20 mM glucose, or a decrease from 20 to 3 mM glucose (calculated as the average of the NAD(P)H levels during the interval from 35–45 min after the change in glucose concentration). This approach was taken (rather than computing the average response) to prevent false positive findings that can result from signal drift. Frequency distributions were constructed by binning NAD(P)H responses in increments of 4% for each cell type. False positives were identified by glucagon-stained cells that responded like insulin-stained cells, and false negative were defined as insulin-stained cells that responded like glucagon-stained cells. Because calcium response to 20 mM glucose did not completely return to baseline after lowering glucose concentration back down to 4 mM, calcium responses were represented simply as the changes of steady-state fluorescence ratio in response to increasing from 4 to 20 mM glucose. Frequency distributions were constructed by binning calcium responses in increments of 0.1 for each cell type.
To determine whether metabolic responses of pancreatic alpha and beta cells can be distinguished from one another, studies were performed in dispersed islet cells. To determine the extent to which the alpha cell metabolic signature arises erroneously in a pure beta cell population (e.g., false positive rate), results from dispersed islet cells were compared to those obtained using an established beta cell line (INS-1 cells).
Immunohistochemical staining of insulin and glucagon in dispersed cells
Rat pancreatic islets were dispersed into single cells and seeded onto coverslips at a density of about 200,000 cells/plate. About 15–30 cells adhered to the Matrigel-coated plate per gridded region, where some cells situated in contact with other cells, while most made no direct contact with other cells; evidence of damage resulting from the isolation process was not observed. Bright-field exposures were taken prior to and after each fluorescent imaging experiment to count the number of cells that were not immunohistochemically stained. As expected, insulin and glucagon staining (carried out after the real time imaging analysis) was robust with virtually no overlap with respect to the identification of beta and alpha cells (Fig. 2A). In general, cells co-staining for both insulin and glucagon were not observed, although alpha and beta cells were occasionally aggregated into doublets. With ten regions imaged per time point, 224 cells were identified within those regions and immunohistochemically assessed for cell type over the course of three experiments. Of these cells, 183 were beta cells, 32 were alpha cells, and 12 did not stain for either hormone, possibly representing other islet cell types (e.g., those producing somatostatin, pancreatic polypeptide, or ghrelin).
Real-time NAD(P)H responses of glucagon- and insulin-positive cells to glucose
NAD(P)H fluorescence was acquired from cells in each of the 10 regions. A fluorescent image was generated prior to the start of the real time experiment for each region and using the cursor, circles were drawn around the cells to be quantified by the software package Elements®. An example of an NAD(P)H autofluorescent image is shown for individual cells that were subsequently immunohistochemically identified (Fig. 2B), illustrating the mapping of NAD(P)H signal to cell type.
Among insulin-positive (beta) cells, an increase of ambient glucose concentration from 3 mM to 20 mM elicited a rapid and robust increase of NAD(P)H content that returned to baseline levels when glucose levels were reduced back to 3 mM (Fig. 3A). By comparison, the change of NAD(P)H content in glucagon-positive (alpha) cells to the same change of ambient glucose concentration was barely detectable (Fig. 3B). As a positive control, levels of NAD(P)H increased markedly in all cells during chemical hypoxia (cyanide), and they decreased in response to the mitochondrial uncoupler FCCP, confirming that the imaging methodology employed reliably detects changes of NAD(P)H content in glucagon- as well as insulin-positive cells. Following the real time imaging, immunohistochemical analysis was carried out as described above.
To establish the rate of false-positive and false-negative results for each cell type, a frequency distribution was constructed based on the minimum percent change of steady state NAD(P)H level in response to either an increase of ambient glucose concentration from 3 to 20 mM, or the subsequent decrease from 20 to 3 mM glucose. Analysis of cell number binned according to both cell type and NAD(P)H response in increments of 4% from 0–52% (Fig. 3C) demonstrated responses of 27 ± 0.9% vs. −5.0 ± 1.6% for beta vs. alpha cells, respectively. Only 5% of the cells were not definitively classified from the immunohistochemical staining, and these cells were not included in the analysis. There was virtually no overlap between the two cell types in the distribution of steady-state NAD(P)H responses to a change of glucose level.
Real-time NAD(P)H responses to glucose in a pure population of insulin-positive cells
To confirm the cell-type specificity of the NAD(P)H response to glucose, studies were repeated in a pancreatic beta cell line (INS-1 cells). In an analysis of 100 cells situated in 10 regions of the gridded coverslip, we observed NAD(P)H responses to changes of ambient glucose that resemble those of islet beta cells. Specifically, we observed a rapid increase of NAD(P)H content in response to an increased of ambient glucose levels from 3 mM to 20 mM that returned to baseline levels following the reduction of glucose concentrations back to 3 mM (Fig. 4A). There were however, differences in the kinetics of the two beta cell types, where the islet beta cells appeared to track the changes in glucose with much more fidelity. The frequency distribution of NAD(P)H changes in increments of 4% from 0–60% (composite response 28.5 ± 1.2%; Fig. 4B) was however comparable to that observed for dispersed islet beta cells, but not alpha cells (Fig. 3), and all cells stained positively for insulin, as expected. Our finding that no INS-1 cell responded with an increase of NAD(P)H of <4% establishes the robust specificity (i.e., low false positive rate) with which functionally distinct cells are detected by this method.
Real-time intracellular calcium responses to glucose, followed by immunohistochemical staining of insulin and glucagon in dispersed cells
As with the NAD(P)H experiments on dispersed rat pancreatic islet cells, cells were immunohistochemically imaged for glucagon and insulin following the acquisition of the real time calcium data (data not shown). Two regions were imaged per time point, for a total of 54 islets cells assessed. Of these cells, 40 were beta cells, and 14 were alpha cells. Calcium fluorescence was acquired from cells in each of the 2 regions. Among insulin-positive (beta) cells, an increase of ambient glucose concentration from 4 mM to 20 mM elicited a rapid and robust increase of calcium content that partially returned to baseline levels when glucose levels were reduced back to 4 mM (Fig. 5A). By comparison, the change of calcium content in glucagon-positive (alpha) cells to the same change of ambient glucose concentration was barely detectable (Fig. 5B). A frequency distribution was constructed based on the percent change of steady state calcium level in response to an increase of ambient glucose concentration from 4 to 20 mM. Analysis of cell number binned according to both cell type and calcium response in increments of the change of fluorescence intensity ratio of 0.1 from 0–0.7 (Fig. 5C) demonstrated responses of 0.33 ± 0.054 vs. 0.051 ± 0.013 for beta vs. alpha cells, respectively. There was some, but not much overlap between the two cell types in the distribution of steady-state calcium responses to a change of glucose level. Thus, neither NAD(P)H nor calcium in alpha cells showed sensitivity to glucose changes in the physiologic range.
Innovative features of a single-cell, live-imaging approach
The need to identify and functionally characterize unique cell types present within a heterogeneous cell mixture arises commonly across many areas of cell biology research. The standard approach to this challenge is to employ FACS to purify the cell type of interest prior to functional analysis. Limitations of this approach include the potentially deleterious impact of FACS on intrinsic cellular properties, such that responses of isolated cells to specific interventions may deviate from what might be observed had FACS not been used. This problem can be compounded by both cell loss and incomplete cellular purification, especially when the cell type(s) of interest constitute only a small proportion of the total number of cells. The alternative method described in this report allows cell-specific phenotyping in complex cell mixtures while circumventing the need for purification, provided that the cell type of interest (1) is amenable to immunohistochemical detection, and (2) displays functional responses that can be detected using a high-throughput imaging platform. To validate this alternative method, we studied mixtures of pancreatic alpha and beta cells derived from dispersed pancreatic islets. Our findings confirm that cell viability and function are preserved when studied using a flow culture system33. Indeed, the characteristic metabolic response to glucose was detected in virtually all INS-1 cells and pancreatic beta cells, and in no alpha cells establishing false negative and false positive rates of 0 in this assay. We also demonstrate that the assay system is amenable to high-throughput cell analysis, and can be applied to as few as a few hundred cells or up to thousands of cells.
We also report the use of frequency histograms to objectively quantify the analysis of cells in a complex mixture, since even cells of a single type cell type can exhibit a range of responses. Once the variability inherent in a particular functional read-out is established for each cell type, the sample size needed for accurate characterization can be determined. The method we used to achieve increased throughput was only partly automated (movement of the x-y plane stage controller was driven by Nikon’s Elements software). With further software development, delineating the cell regions where intensity is quantified will be automated, allowing thousands of cell responses to be analyzed in a single experiment.
NAD(P)H and calcium response to glucose among alpha cells
Owing to the relatively small proportion of alpha cells in an islet, analysis of their response to glucose in dispersed islet cell preparations is difficult, especially since the predominant islet cell type (beta cells) is highly glucose-responsive. The single-cell, live-imaging approach introduced here offers a robust solution to this problem. The glucose-responsiveness of pancreatic beta cells depends in part on expression of glucokinase, a glucose-phosphorylating enzyme whose rate is very sensitive to changes in glucose in the physiological range (between 3 and 12 mM). In cells that express glucokinase, therefore, an increase of ambient glucose levels in this range is accompanied by increased oxidation of phosphorylated glucose, which increases cellular content of NAD(P)H34,35. Although some studies suggest that alpha cells contain glucokinase36,37, providing a mechanism for alpha cells to respond to glucose levels above 5 mM, other studies indicate that glucokinase in rat islets is exclusively localized to beta cells38. Moreover, some studies do not report reliable changes of alpha cells NAD(P)H content in response to an increase in glucose concentration21,22, another study reported a robust response23. The extent to which alpha cells exhibit increased glucose oxidation (and hence increased NAD(P)H content) in response to a physiological rise of ambient glucose levels, therefore, remains uncertain.
Using our live-cell microfluidics imaging system, we report that in stark contrast to what is observed in beta cells, alpha cells do not respond in a unidirectional manner to a physiological increase of ambient glucose concentration. The rate of alpha cell glucose metabolism, therefore, does not reliably vary in response to in physiological variation in ambient glucose concentrations, which may support a lack of a role for the KATP channel in alpha cell glucose sensing21. The glucose-insensitivity of alpha cells was further supported by intracellular calcium data that, consistent with previous studies on mouse islets39, also did not respond to changes in glucose. We acknowledge that the islet cell dispersion process may affect alpha cell function, but such an effect did not appear to affect glucose response of beta cells. Moreover, our finding that alpha cells displayed a robust increase (similar to that of beta cells) in NAD(P)H content in response to cyanide, and in calcium in response to KCl, suggests that all cells in our preparation were capable of displaying a robust metabolic and functional response.
Beta cell NAD(P)H and calcium response to glucose
The NAD(P)H and calcium responses of dispersed beta cells to changes of ambient glucose that we observed were very similar to that displayed by intact islets40, including considerable variability in response magnitude. The latter is presumed to reflect the marked cell-to-cell heterogeneity in content of key proteins regulating beta cell metabolism, such that glucose-responsiveness of beta cells can vary from one cell to the next9,41,42,43. Although tissue dissociation into single cell preparations can affect cellular function, it is noteworthy that the method employed here effectively captures this functional heterogeneity. In addition, the dispersed cells responded to glucose more rapidly than the INS-1 cells, which continued to rise and fall 20 minutes after the change in glucose was instituted. As one might expect, the heterogeneity of the calcium responses in islet beta cells was somewhat higher than NAD(P)H heterogeneity, consistent with the notion that glucose-stimulated changes in metabolism are driving the changes in calcium.
Applicability to other cell types and related considerations
The method presented here is optimally suited to the study of cell types that retain robust functional responses after isolation. As with other methods, the effects of dispersal and plating of cells should be considered in the analysis, both to determine the extent to which isolated cells behave differently than they do in vivo or in tissue explants44,45 and to determine optimal culture conditions. For example, available evidence suggests that the functionality of isolated islet cells improves when they are allowed either to adhere to an extracellular matrix46 or to re-aggregate into small cell clusters of as few as two or three cells47,48, whereas overly confluent cell preparations present problems of their own (e.g., reduced ability to spatially discriminate between cells present in multilayered compact cell clusters).
Another advantage of the system introduced here is that the fluidics systems we employed is designed to maintain flow rates and shear forces in a more physiological manner, which likely optimizes functional responsiveness of individual cells49, whether present as single cells or in small, adherent clusters of adjacent cells that may form monolayers. The microfluidic flow conditions also allow for constant replenishment of oxygen and nutrients, and concomitant removal of cell products, thereby reducing potential detrimental effects of paracrine cues that can accumulate in static systems50.
It is noteworthy that in our study, cell-cell interactions did not appear to alter the NAD(P)H response to glucose in either beta or alpha cells, as judged by the response of isolated cells vs. cells present in small or large clusters, suggesting that glucose metabolism of alpha and beta cells is not robustly affected by cell-cell interactions involving adhesion molecules. The method introduced here is positioned to be useful in assessing the impact of cell-cell interactions on discrete cellular functions, a possibility that awaits additional study. Possible examples include interactions between regulatory and effector T cells within different target tissues51, stem cells whose differentiation may be effected by contact with other cell types52, and, in general, in cell types that are functionally coupled through gap junctions53. These are all instances that offer an opportunity for further exploration and application of our mode of analysis in future studies.
The technology we have developed that both identifies and characterizes individual cells, addresses a common problem in cellular biology involving characterization of cell-specific behavior within a heterogeneous mixture of cells. The approach rests on the micro-patterning of grids on the outer surface of imaging coverslips to allow for mapping of cell type to the cell’s respective functional characterization, and high throughput imaging via computer controlled movement of the microscope stage. We wish to emphasize that the methodology relies on imaging equipment that is widely available in most life science laboratories, and will be readily usable by cell biologists. Given the widespread need for quantifying both cell specific behavior and heterogeneity of function within the same cell type, and the wide range of endpoint imaging assays available, the approach should have applicability in many different fields of cell biology, physiology, medicine, and drug development.
How to cite this article: Neal, S. A. et al. A method for high-throughput functional imaging of single cells within heterogeneous cell preparations. Sci. Rep. 6, 39319; doi: 10.1038/srep39319 (2016).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This research was funded by grants from the Washington State Life Sciences Discovery Fund (4553677), NIH (P30 DK17047 (Cell Function Analysis and Immunology and Inflammation Cores), NCATS R41 TR001196), and the American Diabetes Association/Gail Patrick Estate (Grant 1-15-IN-65).