Introduction

Complex organic molecules possessing luminescent properties (organic luminophores) are widely used in a number of devices for applications in different fields of science and technology, such as photonics, optoelectronics, quantum electronics, nuclear and particle physics, medical diagnostics and others. Without organic luminophores being a functional part of plastic scintillators and wavelength shifters used in ATLAS and SMS experiments made on such powerful machines for high energy physics research as Large Hadron Collider (LHC), no Higgs boson could be found1,2,3. In fact, the most accurate measurements of some physicals constants, like proton radius4, discovery of novel isotopes5 or study a nuclear shell structure6 were made with a help of plastic scintillators. Existing and future cosmic-rays detectors used in astroparticle physics rely upon highly efficient plastic scintillators as well7,8. Multi-ton scale liquid scintillation detectors, which utilize organic luminophores dissolved in extra pure organic solvents, such as KamLAND9, Double Chooz10, Daya Bay11 and Borexino12, explore the nature of still mysterious neutrino particle and have already brought us very important discoveries: reactor antineutrino oscillations13, neutrino from the Earth – geoneutrinos14,15. To solve current challenges of the particle physics, more sensitive and efficient detectors are required to measure, for instance, weakly interacting massive particles (WIMPs) in the dark matter unveiling16,17. The detectors of new generation, which will utilize organic luminophores, for precise studies of Higgs particles are required for the new super machine International Hadron Collider (ILS)18. In this work we suggest a possible solution of this problem from the materials point of view by creation of nanostructured organosilicon luminophores (NOLs) and exemplify their application in highly efficient plastic scintillators, which were invented in the middle of XX century19, but since that time no significant improvements have been made20. Plastic scintillators based on NOLs, which combine two types of luminophores – activators and spectral shifter – in one rigid organosilicon molecule, are 1.5 times more efficient and 40% faster than the conventional ones, due to nonradiative energy transfer of the excitation energy from the activator to the spectral shifter within the NOLs.

For a wide variety of devices, which utilize organic luminophores, different demands are applied to their spectral characteristics. Often organic luminophores are required, the emission spectra of which allow covering the spectral range from 300 to 700 nm. Sometimes their absorption spectra should contain bands from vacuum-UV to visible and near IR region. For some applications absorption cross-sections of the molecule up to 10−16 cm2 and higher as it is found in quantum dots (QDs) are necessary21,22,23. Moreover, for creation of different devices additional technical requirements to organic luminophores are requested: good solubility and processability, low solution viscosity, high thermal stability and so on. Synthesis of the molecules, which possess a set of ππ*-transitions complying with all the demands above, is a non-trivial task since increasing the number of conjugated units leads not only to a growth of the absorption cross-section of the molecule, but also to a shift of the absorption band to longer wavelengths. Solution of this problem was found in this work by creation of a new class of luminophores – nanostructured organosilicon luminophores (NOL). NOLs are highly luminescent branched or dendritic organosilicon macromolecules, consisting of at least two types of low molar weight organic luminophores having different optical band gaps and covalently bonded to each other via silicon atoms (Fig. 1a). They are specially chosen and located relative to each other in the space such a way that π–conjugation between the adjacent luminophores are absent, but there is very efficient intramolecular inductive-resonance transfer of the electronic excitation energy from the outer luminophores (donors) with a wider band gap to the inner luminophor (acceptor) with a lower band gap. The dendritic structure of NOLs leads to a high ratio of the donor-to-acceptor luminophores as well as good solubility and processability.

Figure 1
figure 1

Nanostructured organosilicon luminophores (NOLs).

(a), Schematic representation of NOLs. (b), Schematic representation of the main synthetic steps for the preparation of NOLs. (c), Chemical structures of NOLs prepared and investigated in this work.

Such strategy allows realization of a programmable synthesis of nanosized (1–3 nm) luminophores possessing: i) absorption in a wide optical spectral region; ii) absorption cross-sections of the excitation light, which is 5–10 times higher as the cross-sections of the best low molar weight organic luminophores; iii) very high photoluminescence quantum yield (PLQY); iv) luminescence spectra in the defined wavelength region; v) short luminescence lifetime as compared to the best inorganic luminophores; vi) low toxicity as compared to inorganic quantum dots (QDs). In fact, this approach is an attempt to combine the best features of organic luminophores with those of inorganic QDs24. As it will be described below, NOLs, similar to inorganic QDs, has an increased absorption in the short wave-range region and a broadband absorption spectrum lacking in the standard organic luminophores25. High brightness of NOLs caused by large values of molar absorption coefficient, high PLQY, fast luminescence decay time and possibility to adjust the emission wavelength in a wide spectral region allows them to be ideal systems for the applications as QDs. Nowadays there are several millions of low molar weight organic compounds synthesized (including the luminescent ones) that open the possibility to construct almost unlimited number of NOLs with different absorption-luminescent properties.

An alternative to toxic inorganic quantum dots, such as CdS, CdSe or Pb containing counterparts, is silicon nanocrystals having a size of 5 nm and below, known as silicon QDs. Albeit recently they have been used as luminophores in milticolored light emitting diodes, the color palette of them is still limited to the region from yellow to NIR26. Moreover, their PLQY strongly depends on the size, monodispersity and surface chemistry of the silicon nanoparticles and significantly decreases from NIR to shorter wavelengths27. Careful control of all these parameters only recently allowed reaching PLQY of 43% in the visible region for 1–3 nm silicon QDs28. The other known approaches to combine properties of QDs and fluorescence of organic molecules are fluorescent core-shell silica nanoparticles (C dots)29,30,31 and semiconducting polymer nanoparticles called polymer dots (P dots)32, which are mostly used in fluorescence imaging and biosensing. The C dots consist of ca. 2 nm organic luminophor-reach silica core modified with pure silica shell so that the total size of the nanoparticle is about 20–30 nm. This leads to efficient absorption cross-sections approaching those of QDs and better stability as compared to organic luminophores themselves due to shielding effect of the silica shell.

In this work we have elaborated methods of synthesis of different novel highly luminescent oligoarylsilane branched and dendritic structures that allowed to prepare a number of NOLs, which potentially can be used in such devices as ionization radiation detectors (scintillators), effective spectral shifters – convertors of the emission with the energy of high frequency photons (140–400 nm) into emission in the visible spectral range (400–700 nm), for generation of simulated emission in the working elements of pulsed dye lasers, etc. NOLs could find further applications in biology and medical diagnostics as fluorescent labels (quantum dots), since they do not contain any toxic elements.

Results

Synthesis and optical properties of NOLs

Typical examples of NOLs prepared in this work are shown in Fig. 1c, where seven NOLs having emission in different spectral regions are presented. Their spectral-luminescence characteristics are summarized in Table 1. As can be seen from the data presented these NOLs have intramolecular energy transfer efficiency (ETE) up to 100% and the PLQY up to 96% that will be discussed in details below. Preparation of such NOLs is based on organometallic synthesis and consists of two main steps (Fig. 1b). On the first step unsymmetrical organosilicon branched molecules having donor luminophores and a part (usually one or two aromatic or heteroaromatic rings) of the acceptor luminophor are synthesized. On the second step these branched functional molecules are coupled to each other via a difunctional aromatic/heteroaromatic precursor with formation of the acceptor luminophor located in the center of NOL. Sometimes an intermediate step is required to activate a functional group of the unsymmetrical organosilicon branched molecule obtained on the first step in order it can be used as a reagent in the second step. The detailed synthesis of these molecules and their characterization can be found in the Supplementary Information.

Table 1 Optical properties of nanostructured organosilicon luminophores (NOLs) in dilute THF solutions (C = 10−5 M for absorption and C = 10−6 M for luminescence measurements): – absorption maximum, σmax – absorption cross-section, – luminescence maximum, PLQY – photoluminescence quantum yield

Spectral distributions of the absorption cross-sections for a number of NOLs described in this work are shown on Fig. 2a. As can be seen from these data, the absorption spectra cover a wide spectral range from 200 to 600 nm with the absorption cross-sections almost on all wavelengths exceeding 10−16 cm2 and in some cases reaching 10−15 cm2 (Table 1). Luminescence spectra of the NOLs synthesized cover a wide spectral range from 350 to 750 nm (Fig. 2b). Photoluminescence quantum yields of the NOLs vary from 55 to 96% and they have weak dependence on the excitation wavelength (Table 1).

Figure 2
figure 2

Optical properties of NOLs in dilute THF solutions.

(a), Spectral distributions of absorption cross-sections (C = 10−5 M). (b), Luminescence spectra (C = 10−6 M).

Such good spectral-luminescence characteristics of NOLs can be obtained using the following approach. On the one hand, a low molecular weight organic luminophor with rather high PLQY, the emission spectrum of which is located in the required wavelengths range, is used as the emitting fragment of NOL (i.e. as the acceptor with the lower optical bandgap). On the other hand, low molar weight organic luminophores with wider bandgaps (donors) are used as the fragments of NOLs, which absorb light in a wide wavelengths range. A NOL can contain 4, 6, 12 or even more such donor fragments, which can have a PLQY significantly lower than the acceptor fragment, but not equal to zero. The main requirement for the donor fragments is that their luminescence spectra should coincide with one of the absorption bands of the acceptor. Since the rate constant of a nonradiative energy transfer by inductive-resonance mechanism is proportional to , where is a distance between the centers of donor and acceptor fragments and is a critical radius of the inductive-resonance energy transfer, which according to the Förster formula33 is proportional to the overlap integral of the acceptor absorption spectra εA(v) and the donor luminescence spectra fD(v), the nonradiative ETE between the closely (1–2 nm) located donor and acceptor fragments is approaching to 1 (100%). Thus, the incident light is absorbed in the molecule of NOL by several donor fragments that lead to a very high absorption cross-section. ETE close to 1 guarantees that the excited energy almost without loses is transferred to the correspondingly chosen acceptor fragment with a high PLQY. Because of that the PLQY of NOL is close to those of the acceptor itself under irradiation to any of the absorption bands of NOL (Table 1).

Plastic scintillators

One of the exciting applications of NOLs can be their usage in plastic scintillators, which consist of a polymer (usually, polystyrene or polyvinyltoluene) matrix and organic luminophores. Standard plastic scintillator based on polystyrene (PS) contains two types of organic luminophores – activator and spectral shifter of the activators' luminescence (Fig. 3a). In general its' working principle can be described as following. PS matrix absorbs energy of the incoming ionizing radiation, as a result of which a part of the PS macromolecule monomer units appears in the excited state. This energy is fast dissipated to intra- and intermolecular vibrations, as a result the excited units of the macromolecules for the time of 10−12–10−11 s transform into low electronic excited singlet states with the energy of 3.7–4.2 eV. Activator is destined for accepting this energy and transforming it into emission with the longer wavelength to avoid self-absorption of the primary emission of the PS matrix. For this purpose activator should possess a high PLQY. Large concentration of the low molar weight activator (0.05–0.1 M) with high absorption cross-section of the energy in the region of 3.7–4.2 eV (295–335 nm) is used for efficient accepting the excitation energy received by the PS matrix. Under such conditions activator molecules absorb a significant part of its' own luminescence due to a re-absorption. For decreasing the re-absorption losses and further shifting the activator luminescence spectrum into the region of the maximal sensitivity of the photodetector used (photomultiplier tube (PMT) or solid-state photoelectric cells) applied are spectral shifters, which are added into the matrix in the amount of 5–20 times less than the concentration of the activator. The spectral shifter should possess a large absorption cross-section for the activator luminescence spectrum (usually at 330–370 nm) and high quantum yield of its own luminescence. The most efficient spectral shifters have the emission wavelengths at 420–450 nm, which is close to the maximum sensitivity of the PMTs, usually used as photodetectors for plastic scintillators. Therefore, typical plastic scintillator has two steps of the excitation energy transfer: the first step – from the polymer matrix to the activator and the second step – from the activator to the spectral shifter. It is accepted now that both radiative and nonradiative (Förster) energy transfer mechanisms could be responsible for these energy transfer steps, where the Förster energy transfer prevails in the first step, while the radiative energy transfer is mainly responsible for the second34. The last thesis is based on: (i) chaotic location of the activator and the spectral shifter luminophores relative to each other in the polymer matrix and (ii) the average distance between them exceeding the maximal distance of 1–2 nm necessary for the effective Förster energy transfer. This leads to significant energy losses during the energy transfer process in plastic scintillators. That is why nowadays the efficiency of plastic scintillators is limited and it is significantly below those for the inorganic scintillators20. Still the advantages of plastic scintillators, such as fast response times, light weight and possibility to produce them in large volumes make them widely used in high energy physics, radiation control monitors35 and other application fields. Moreover, appearance of novel types of the solid state photodetectors, like silicon photomultipliers (SiPM)18, with the best sensitivities in the range of 500–600 nm requires new generations of plastic scintillators, which emit light in this region.

Figure 3
figure 3

Schematic representation of plastic scintillators, their scintillation and amplitude spectra.

(a), Standard plastic scintillator based on PS matrix with activator and spectral shifter luminophores. (b), Plastic scintillator with NOLs combining both activators and spectral shifter in one nanostructure. Energy transfer steps from the excited PS matrix to the activator and form the activator to the spectral shifters are shown with corresponding arrows. (c), Scintillation spectra of a few model PS scintillators (standard Sc0 and with NOL-X – NScX) having different wavelengths of the maximum, the values of which are indicated for each sample. (d), Amplitude spectra, obtained under irradiation of the samples of PS scintillators NScX, containing each 0.01–0.015 M of NOL-X and the standard scintillator Sc0 with α-particles having the energy of 5.49 MeV.

Plastic scintillators with NOLs

Preparation of highly efficient plastic scintillators with a maximum emission wavelength located in the region from 420 to 600 nm via selection of low molar weight luminophores for activator and spectral shifters is a complex task. Replacing organic luminophores with NOLs having optimally selected spectral luminescent characteristics allows for the first time successfully solve it. Activators and spectral shifters in NOLs are chemically linked to each other via Si atoms, which lead to a highly efficient non-radiative energy transfer of the electronic excitation from the activator luminophores to the spectral shifter within one NOL (Fig. 3b). This fact replaces the radiative energy transfer step to a more efficient non-radiative energy transfer and leads to creation of highly efficient plastic scintillators as compared to the standard ones as will be shown below. In this work we have made a few model PS scintillators showing different wavelengths of the maximum in the scintillation spectra (Fig. 3c). NOLs for these plastic scintillators were designed such a way that the cross-section of their absorption in the region of the matrix emission was maximal. The intensity maxima in the scintillation spectra for the plastic scintillators with nanostructured luminophores are in the range between 389 and 588 nm.

Today the most efficient plastic scintillators based on PS contain p-terthenyl (pT, 0.05–0.15 M) as the activator and 1,4-bis(5-phenyloxazol-2-yl)benzene (POPOP, 0.0015–0.005 M) as the spectral shifter. Their light output reaches 10,000 photon/MeV (for β-particles), while the wavelengths of the maximum intensity in the scintillation spectra lies in the region of 425–440 nm. That is why for determination of the light output of novel plastic scintillators with nanostructured luminophores we have used a standard scintillator (Sc0), containing 0.1 M p–terthenyl and 0.0015 M POPOP in the shape of a disk with diameter of 25 mm and height of 0.2 mm. It's experimentally measured light output was 1,000 photon/MeV under its irradiation with α-particles having the energy of 5.49 MeV that corresponds to the light output of 10,000 photon/MeV under its irradiation with β-particles19.

Amplitude spectra, obtained under irradiation of the samples of PS scintillators NScX, containing each 0.01–0.015 M of NOL-X (X = 1–6) and the standard scintillator Sc0 with α–particles are shown on Fig. 3d. As can be seen from these data, the samples containing from 0.01 to 0.015 M of NOLs under irradiation with α-particles give the light output from 980 to 1,280 photon/MeV (Table 2). Therefore, we have created a series of plastic scintillators, the emission spectra of which cover the spectral range from 389 to 588 nm, while their light output in the whole region is equal or exceed the light output of the standard plastic scintillator.

Table 2 Composition and properties of plastic scintillators with polystyrene matrix and nanostructured organosilicon luminophores NScX and the standard plastic scintillator Sc0. The light output was measured in disk-shaped samples with diameter of 25 mm and height of 0.2 mm under irradiation with α-particles with 5.49 MeV

Since the NOLs for application in plastic scintillators were designed such a way that their absorption cross-sections in the region of PS matrix emission is maximal, while in the range of their own luminescence it is minimal (Fig. 2), the increase of their concentration up to 0.02–0.03 M could lead to further enhancing the light output of the scintillator under consideration. This trend can be clearly seen for the PS scintillators with NOL-1 and NOL-2 (Table 2). The scintillation efficiency rose from 1,156 photon/MeV (for NSc1) to 1,350 photon/MeV (for NSc1a), when the concentration of NOL-1 increased from 0.12 to 0.18 M. Similarly, the scintillation efficiency rose from 1,281 photon/MeV (for NSc2) to 1,381 photon/MeV (for NSc2a), when the concentration of NOL-2 increased from 0.15 to 0.23 M. The amplitude spectra of scintillations of the standard PS scintillator Sc0 and the PS scintillator NSc1b, in which the concentration of NOL-1 was increased up to 0.03 M, are shown in Fig. 4a. In this case the light output under irradiation with α–particles increased from 1,156 photon/MeV (for NSc1 with CNOL-1 = 0.012 M) up to 1,489 photon/MeV (for NSc1b with CNOL-1 = 0.03 M), which is 1.5 times higher as compared to the light output of the standard scintillator Sc0 (1,000 photon/MeV). A discussion on maximal theoretically possible scintillation light output for plastic scintillators and its improvements in this work can be found in the corresponding section below.

Figure 4
figure 4

Amplitude spectra and scintillation decay times of different PS scintillators.

(a), Amplitude spectra, obtained under irradiation of the samples of PS scintillator NSc1b, containing 0.03 M of NOL-1 and the standard scintillator Sc0 with α-particles having the energy of 5.49 MeV. (b), Comparison of the scintillation decay times of the PS scintillator with 0.03 M of NOL-1 (NSc1b) and the standard PS scintillator Sc0.

The other advantage of NOLs usage in scintillators or other photonic devices is their short scintillation decay time (SDT), which is defined by the fluorescence decay time of the spectral shifter, located in the center of NOLs. Comparison of the SDTs of PS scintillator with 0.03 M of NOL-1 and the standard PS scintillator Sc0 is presented on Fig. 4b. The results obtained can be approximated with two exponents, representing the fast and slow components of the scintillation. Duration of the fast component of SDTs for these scintillators is 1.71 ns for NSc1a vs 2.41 ns for Sc0, while the slow component is 13.35 ns vs 19.11 ns, respectively. A ratio of the intensity of the fast to the slow component is 1.32 vs 1.57, respectively, that is also in favor for NOL-containing scintillator. Therefore, both components of the SDT of the “nanostructured” PS scintillator are ca. 40% better than those of the standard PS scintillator. Such temporal characteristics and very high light output of the plastic scintillators with NOLs pave the way for creation of novel plastic scintillation detectors with high temporal resolution. Possibility of tuning the emission wavelength of NOLs opens the door for wide application of plastic scintillators with various photodetectors, including novel types of them, such as compact SiPM18, flexible and light weight organic photodetectors36,37 and others38.

Discussion

NOLs can be considered as a particular type of “dendritic molecular antenna”, which consists of at least two types of luminophores united in one dendritic molecule with Förster energy transfer between them39. However, most of the dendritic molecular antennas known nowadays are organic molecules or metal complexes, where luminophores can feely rotate relative to each other or linked through flexible groups40,41,42,43. This leads to a chaotic displacement of the luminophores relative to each other in the molecule of such dendrimers, resulting in theoretically high (90–99%), but experimentally decreased to 30–40% efficiency of Förster energy transfer and moderate to low overall PLQY44. Recent results indicate that calculations based on just the changes in donor-emission lifetime and quantum yields clearly overestimate the excitation energy transfer efficiency, as many other nonradiative modes of de-excitation are widely ignored44. Albeit there are a few examples of rigid dendritic molecular antennas with high luminescence quantum yields, ranging from 65 to 81%45, their synthesis is complicated. It should be noted that small molecule artificial antennas have typical quantum yield between 12 and 60%46. NOLs are rather simple rigid organosilicon molecules, which can be easily synthesized and possess high PLQY, measured experimentally in this work. Their overall PLQY is determined by multiplication of two parameters: 1) PLQY of the acceptor organic luminophor located in the center of NOLs and 2) the efficiency of intramolecular Förster energy transfer from the outer organic luminophores (donors) to the central organic luminophor (acceptor). Thus, choosing different acceptor luminophores with their own PLQYs leads to different PLQYs of the corresponding NOLs (compare PLQY of NOL-2 through NOL-7 having the same donor luminophores and different acceptor luminophores, see Fig. 1c and Table 1).

In our previous works we have synthesized a number of luminescent organosilicon molecules, consisting of two types of luminophores (oligothiophenes with different conjugation length, connected through silicon atoms), which have the efficient energy transfer between them, leading to the co-called “dendritic molecular antennae effect”47,48. However, their PLQY was rather low (9–11%) that was limited by the PLQY of the acceptor luminophores used (ter- or quaterthiophene) and did not allow to call them NOLs. Bithiophenesilane monodendrons and dendrimers, the PLQY of which was significantly higher as compared to its constituent bithiophenesilanes, have also been reported49. These nanoscale molecules, however, had only one type of luminophores and their PLQY was limited to 30%. The only dendritic molecule, which by its optical properties is very close to the NOLs reported in this work, is the oligoarylsilane dendrimer50. This dendrimer has two types of luminophores (in fact, the same as in NOL-3 and NOL-4) within the intramolecular energy transfer efficiency of 88% and the overall PLQY of 41% that is too low for practical applications, in particular in plastic scintillators, described above.

It is worth to discuss here the maximal theoretically possible scintillation light output of plastic scintillators based on polystyrene (PS) and the improvements achieved using NOLs as compared to the standard PS scintillators. In the work of Rozman and Kilin the following formula for determination of the maximal light output of plastic scintillators was suggested34:

where Qph – PLQY of the luminescent centers in the exited matrix, ε – average energy loss for one activation (ionization or transition of the molecule into excited state), eV; smax– light output of the scintillator, photon/MeV.

According to the work34 PS has ε = 8 eV. As an upper estimation of the maximal Qphof the luminescent PS units one should apparently consider the luminescent quantum yield of toluene molecules, which is equal to 0.1751. Then the maximal light output for PS scintillator is about 21,250 photon/MeV (2,125 photon/MeV for α-particles) under approximation that the PLQY of the activator and the spectral shifter in the PS matrix is equal to 1 and the light collection is 100%. Bearing in mind that the average PLQY of NOL-1 is 0.8, we conclude that under concentration of 0.03 M nanostructured organosilicon luminophor NOL-1 absorb ca. 87% of all photons emitted by the PS matrix. However, for the standard PS scintillator this value is only 58–59% (PLQY(pT) = 0.9; PLQY(POPOP) = 0.9)51. These considerations lead to conclusion that the light output of the standard PS scintillator Sc0 has just 47% from the theoretical maximum, while those of the best PS scintillator reported in this work NSc1b reaches 70% from the theoretical maximum that is ca. 1.5 higher.

It should be noted that recently plastic scintillators with phosphorescence-based luminophores have been reported52,53. Due to efficient both singlet and triplet emission, they are able to show very high light output up to 30,000 Ph/MeV for β-particles that is 2 times higher as reported in this paper. However, the very nature of phosphorescence leads to a different timescale of their scintillation decay time: instead of a few ns typical for plastic scintillators, they have 1.2 microseconds decay time that is 700 times worse than those reported in this article. This fact significantly tightens the applications landscape of phosphorescent plastic scintillators: in terms of the light output they are still below the level of typical inorganic scintillators, but in terms of scintillator decay time they are almost 3 orders of magnitude worse as typical plastic scintillators. In this sense plastic scintillators with NOLs have a unique combination of high light output (up to 15,000 Ph/MeV for β-particles) with a very short scintillation decay time of 1.7 ns.

Finally, usage of NOLs in highly efficient plastic scintillators considered above is exciting but not exclusive example of future applications of NOLs. Wide range of the emission wavelengths, which can be tuned by appropriate choice of the luminophores for design and synthesis of novel NOLs on their basis, huge absorption cross-sections and excellent luminescence quantum yields, their tiny size of a few nm, good stability, solubility and processability, potentially low toxicity and other unique properties allow to foreseen their future applications in different areas of science and technology. Among them could be spectral shifters used in fiber optics, functional materials in organic light emitting diodes (OLEDs), replacement for toxic inorganic quantum dots used in molecular biology and medicine and plenty of other fast-growing applications.

Methods

Synthesis

Lithiation, bromination, Grignard, organolithum and organomagnesium reactions with chlorosilanes, Kumada and Suzuki couplings were used for the synthesis of NOLs and their precursors. Initial unsymmetrical organosilicon branched molecules were prepared on step I (see Fig. 1b) by lithiation of the donor luminophores followed by the reaction with corresponding aryltrichlorosilanes. For the key reaction step II organometallic synthesis under Suzuki conditions was used. The necessary organoboron reagents were prepared by lithiation of the corresponding precursors followed by the reaction with 2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane. Isolation and purification of the compounds was made by distillation, recrystallization, column chromatography or GPC techniques. Identification of chemical structure of NOLs was made by a combination of GPC with the diode matrix detection in the UV-Vis region, 1H, 13C and 29Si NMR-spectroscopy, elemental analysis and MALDI-TOF MS. Detailed synthesis procedures and analysis data can be found in the Supplementary Information.

Spectral-luminescence properties

Optical properties of NOLs were investigated by UV-Vis absorption and luminescent spectroscopy in dilute solutions in THF using the concentrations of 10−5 M for absorption and 10−6 M for luminescence measurements. Absorption spectra were recorded using standard 10 mm photometric quartz cuvette on spectrophotometer Shimadzu UV-2501PC (Japan) in the spectral region from 190 to 800 nm. Luminescence spectra were recorded at elaborated and prepared in ISPM RAS scanning spectrofluorimeter ALS-01M, the detailed characteristics of which can be found elsewhere54. The fluorescence intensity was measured in the mode of single photons counting on the consecutive time intervals. PLQY of NOLs was determined by comparison with the known PLQY of fluorescent standards using the method of fluorescence measurements of optically diluted solutions by the techniques described in details elsewhere47,51.

Preparation of PS scintillators

Plastic scintillators were prepared by co-extrusion of PS with corresponding NOLs at different weight ratios (from 98:2 to 95:5) at 180°C using a MicroCompounder “DACA Instruments” (USA) having twin-screw cyclic extruder and a microprocessor consol. Rotation speed of the extruder was slowly raised from the initial 90 to the final 360 rpm. After 5 min of mixing the composition obtained was released through a round die to make extrudate rods. The samples for investigations of scintillation efficiency being round plates with the diameter of 25 mm and height of 0.2 mm were prepared by hot-pressing of the corresponding extrudate rods at 180°C and 10 MPa using a hydraulic press apparatus P-10 (Russia) with heated plates.

The scintillation light output and decay time were measured with a single photoelectron counting technique (see Figure S29 and its description in the Supplementary Information). The sample of plastic scintillator film was viewed with two Hamamatsu R7400U-06 fast photomultiplier tubes having a rise time of 0.78 ns. One of them (PMT1) was coupled to the film with an optical grease VISILOX V-788, i.e. with the good optical contact with it. A collimated alpha-source (239Pu) was placed from the opposite side of the film coaxially to the PMT1. The second one (PMT2) did not have an optical contact with the film and was situated aside. The light collection efficiency to the PMT2 was artificially made very low to ensure its operation in a single photoelectron counting mode. The PMT2 was used to trigger a digital oscilloscope Tektronix TDS5034 with a sampling rate of 1.25 GHz. Both PMT1 and PMT2 signal waveforms were recorded by two scope channels. During processing of the waveforms, the large scintillation signal from the PMT1 was used as start timing and the single-photoelectron one from the PMT2, as stop. The obtained distribution of time intervals was approximated with two exponents (see Fig. 4b). The area of the signal from the PMT1 was used for relative measurements of the scintillation efficiency.

For determination of the absolute values of the light output of the samples a comparison was made with the light output of the standard PS scintillator (UPS89 from Amcrys-H, Ukraine) having a thickness of 0.2 mm, for which the light output is known from the passport characteristics. It was additionally checked using the calibrated PMT under scintillation excitation with α-particles and was found to be 1,000 photon/MeV.