The Fukushima nuclear accident released radioactive materials into the environment over the entire Northern Hemisphere in March 2011, and the Japanese government is spending large amounts of money to clean up the contaminated residential areas and agricultural fields. However, we still do not know the exact physical and chemical properties of the radioactive materials. This study directly observed spherical Cs-bearing particles emitted during a relatively early stage (March 14–15) of the accident. In contrast to the Cs-bearing radioactive materials that are currently assumed, these particles are larger, contain Fe, Zn, and Cs, and are water insoluble. Our simulation indicates that the spherical Cs-bearing particles mainly fell onto the ground by dry deposition. The finding of the spherical Cs particles will be a key to understand the processes of the accident and to accurately evaluate the health impacts and the residence time in the environment.
An earthquake with a magnitude of 9.0 occurred in Japan on March 11, 2011. In addition to the earthquake itself, a tsunami struck along the east coast of Honshu and damaged the Fukushima Daiichi nuclear power plant (FNPP). The FNPP eventually lost its ability to cool the nuclear fuel, which caused hydrogen explosions and released radioactive materials into the environment1,2. Because of the local contamination, many people still cannot return home. Currently, the Japanese government is spending considerable amounts of money to clean up the contaminated residential environment and agricultural fields.
The radioactive materials released to the atmosphere traveled over the entire Northern Hemisphere3,4,5,6,7. In Europe, for example, Masson et al.3 measured increases in radioactive cesium and iodine in the air from March 19, 2011 and showed that the maximum levels occurred between March 28 and 30. Although the accident has global impacts, we still do not know exactly what happened in the reactors during the accident, and the estimates of the radioactive Cs releases vary largely from 9 to 36 PBq6,8,9,10.
The chemical and physical properties (i.e., chemical forms, particle sizes, shape, phases (gas or aerosol), water solubility, and residence time) of the radioactive materials released into the environment are not well known11. Such knowledge is necessary to improve the numerical models to estimate the geographical distributions and evaluate the human exposures during and after the accident. Because the mass of released radioactive material was small, i.e., the release of 137Cs from the accident was <20 kg, and the material spread globally, it is extremely difficult to chemically detect it other than by radioactivity detectors. In this study, we chemically detected Cs within single particles for the first time by using electron microscopy and report the shape, composition, water solubility, and sizes of the particles to evaluate the implications of their formation process, occurrences in the environment, and potential health effects. This knowledge is still important for preventing further accidents, finding effective ways to remove the radioactive materials from the environment, and preventing further resuspention of the materials.
Two plume events
The major radioactive material release events occurred during March 12 and 23, 2011 at the FNPP5. We collected aerosol samples on quartz fiber filters (25 cm × 20 cm) at the Meteorological Research Institute, Tsukuba, Japan, which is located 170 km southwest of FNPP (see the Method section). In these samples, we found two significant peaks in the radioactivity concentrations between March 14 and 15 (Plume 1) and between March 20 and 22 (Plume 2) (Fig. 1). These significant plumes in the air were also reported in eastern Japan and polluted the water and soil2,12,13,14,15. Meteorological conditions, such as rain and the wind direction, and the releases of radioactive materials were the main causes of the high surface deposition events14. We used the filters that had the maximum radioactivity levels from each plume (from March 14, 21:10 (local time) to March 15, 09:10 and from March 20, 21:30 to March 21, 09:13) and analyzed portions of these filters (~10 cm2 per filter) using an imaging plate (IP) and a scanning electron microscope (SEM) to directly observe the radioactive materials. In addition, we measured the aerosol particle size distributions within the plumes (Figs. S1 and S2).
First plume (March 14–15)
We measured the radioactive materials that were collected in the filter at ground level on March 14–15 using the IP (Fig. 2). The radioactive materials were distributed spotty, suggesting that the number of radioactive particles was relatively small but that their activity levels were relatively strong. Within this filter sample, we counted approximately 100 spots caused by radioactive materials, suggesting a concentration of approximately 10 radioactive particles per m3. For reference, the average particle number concentration was 4.1 × 107 per m3 for particles larger than 0.5 μm from March 15 (Fig. S1). The spotty distribution in the IP image was also observed in the rooftop filter sample from March 15 (Fig. S3).
To detect radioactive particles using SEM, it is necessary to reduce the number of non-radioactive particles on the filter. Therefore, we cut the filter into many small parts to include the radioactive spots features (Fig. S4). We then measured the radioactivity of each segment using IP and/or a Ge detector to chase the radioactive particle. After reducing the particle numbers in the segments from the three radioactive spots, we used the SEM and found three radioactive Cs-bearing particles.
In Figure 3, we show a particle containing Cs (Cs Particle 1). The particle is spherical with a diameter of 2.6 μm. The energy dispersive X-ray spectrometer (EDS) spectrum shows Cs peaks. The Cs distribution in the elemental mapping image indicates that the spherical particles consist of Cs along with substantial amounts of Fe and Zn and minor amounts of Cl, Mn, and O. The decay-corrected activity (as of March 2011) of Cs Particle 1 is 3.27 ± 0.04 and 3.31 ± 0.06 Bq for 137Cs and 134Cs, respectively (Fig. S5). Assuming a particle density of 2.0 g/cm3, the Cs mass percentage within the particle is estimated from its activity (Bq) to be 5.5. Another Cs-bearing particles (Cs particles 2 and 3) from the same filter but different spots are similar to Cs Particle 1, although they have weaker activity (Fig. S6). The particles consist of Fe, Zn, and Cs and are approximately 2.0 μm in diameter. The radioactivity for Cs particle 2 is 0.66 ± 0.02 and 0.78 ± 0.04 Bq for 137Cs and 134Cs, respectively. The Cs mass percentage within Particle 2 is estimated from its activity to be 2.5. Assuming that the entire the radioactivity in the Plume 1 was from the Cs-bearing spherical particles gives an average of 1.4 Bq per particle, which is comparable to that of Particle 2.
We analyzed the water solubility of Cs Particle 1 by comparing the particle's shape before and after exposure to water (Fig. S7). The results show that there was no change in shape, suggesting that the particle was insoluble to water at least during atmospheric transportation.
Second plume (March 20–21)
The IP image of the filter collected on March 20–21 indicates that the radioactive materials are evenly distributed within the filter with approximately 10 diffused spots (Fig. 2). We cut the filter including a diffused spot, formed several layers, and captured the IP image (Fig. S8). The radioactivity is distributed along the filter segments, a result which differs from that of Plume 1. We interpret that small amounts of the radioactive Cs attach to other dominant aerosol particles and that the occurrence is consistent with the results of Kaneyasu et al.16 about the role of sulfate aerosols as carriers of 137Cs. An SEM analysis with EDS elemental mapping shows numerous sulfate and mineral dust, as is commonly found in aerosol samples (Fig. S8). The aerosol filter sample from the rooftop site also indicates a similar distribution of radioactive materials (Fig. S3).
We simulated the depositions of the radioactive particles from Plumes 1 and 2 using a tagged chemical transport model. Unlike other simulation models (e.g.4,6,9,12), we considered the aerosol dynamical processes explicitly and used the measured values and assumptions of the particle physical and chemical properties from our observations, i.e., on March 14–15, radioactive Cs consisted of 2.3 μm hydrophobic particles, whereas on March 20–21, the Cs was carried by hydrophilic submicron particles (e.g., sulfate).
The tagged simulation result indicates that the aerosol particles on the filter sample from Plume 1 were mainly emitted during March 14, 17:00 to March 15, 02:00 (JST) from the FNPP. On the other hand, the aerosol particles on the filter sample from Plume 2 were mainly emitted during March 19, 20:00 and March 20, 07:00.
In Figure 4, we show simulation of the total (dry + wet) 137Cs deposition. Within Plume 1, 17% and 5.1 × 10−3% of the 137Cs released from the FNPP fell onto the ground by dry and wet deposition processes, respectively, and the rest (83%) was deposited into the ocean or was transported out of the model domain. In contrast, the deposition ratios onto the ground for the particles within Plume 2 were 1.9% and 3.8% by dry and wet deposition, respectively.
This study reports for the first time the presence of spherical radioactive Cs-bearing particles emitted from the FNPP during a relatively early stage (March 14–15) of the accident. The particles coexist with Fe, Zn, and possibly other elements, and their diameters are approximately 2 μm. Because these elements were evenly distributed within the particle, we conclude that they are internally mixed and form an alloy. This result differs from that reported by Kaneyasu et al.16, who showed that the Cs measured on samples collected during April and May 2011 was carried by sulfate aerosol particles approximately 0.5 μm in size. Due to its spherical shape and composition, the particle is likely solid and is largely insoluble in water. Spherical aerosol particles, such as fly ash, commonly form from liquidized materials or during the condensation of vaporized materials depending on their sizes17.
The spherical Cs-bearing particles were larger and less water soluble than sulfate particles, resulting in more dry deposition and less deposition in the region northwest of the FNPP (Figs. 4 and S9). If we assume that all of the Cs had been carried by the sulfate aerosol particles in Plume 1, 5.6% and 9.3% of the released 137Cs should have been deposited through dry and wet deposition processes, respectively. Accordingly, the geographical distribution of Cs deposition differs depending on the physical and chemical properties (Fig. S9), although the quantitative radioactivity levels for the total deposition in the model depend on assumptions such as cloud microphysics and the total amount of emissions from the FNPP, which is still under debate. Our model results suggest that because the dry and wet deposition processes are sensitive to the chemical form and sizes of the Cs carriers, multiple numerical simulation models based on the accurate chemical and physical properties of Cs-bearing particles will be needed to reevaluate how the Cs from the early stages of the accident was deposited.
It is probable that the emission processes had changed between the emissions of Plumes 1 and 2 as the accident and water injection progressed; however, further studies will be needed to reveal the emission process during the accident.
This study aims to show the presence of spherical radioactive Cs-bearing particles to stimulate and facilitate further studies across multidisciplinary fields that will enable the proper understanding and evaluation of particle effects. We believe the finding of the Cs-bearing particles will have implications to the following studies.
The composition and the spherical shape of the Cs-bearing particles emitted by the FNPP accident will be a key to understand what happened in the nuclear reactors during the accident.
The spherical Cs-bearing particles likely have longer retention times on the land surface than those of the water-soluble Cs particles. The retention time of the particles in the soil or other environments needs to be reconsidered.
The health effects of the particles should be evaluated based on the particle sizes and insolubility in water.
The samples were collected at the Meteorological Research Institute (Tsukuba, 36.05N, 140.13E) using both a high-volume aerosol sampler (Sibata Scientific Technology ltd., HV-1000F; 1000 m3/24 h) placed on the ground and a PM2.5 aerosol sampler (24 m3/24 h) placed on the roof of the 6-floor building (approximately 25 m from ground level). Quartz fiber filters were used in both samplers. The sampling times were 6, 12, or 24 h for the high volume air sampler and 24 h for the PM2.5 aerosol sampler. The particle size distributions were monitored using an aerosol particle sizer (APS; TSI-3321) and a scanning mobility particle sizer (SMPS; TSI-3080 and TSI-3775) on the rooftop site for particle sizes >0.5 μm and between 7 and 289 nm in diameter, respectively, with a 2.5 μm cutoff size.
An imaging plate (IP; GE CRx25P) was used to detect the radioactivity on the filters with a pixel spatial resolution of 50 μm. An intrinsic Ge detector (SEIKO EG&G) coupled with a multi-channel analyzer was used to obtain the gamma spectra of each Cs-bearing particle and filters. A scanning electron microscope (SEM; Hitachi high-Technologies SU 3500) and an energy dispersive X-ray spectrometer (EDS; Horiba ltd. X-max 50 mm) were used to observe and analyze the shapes and compositions of the particles. The particles attached to the filter fibers were mounted within a carbon tape (Fig. S4). A manipulator (Micro Support Corp., AP-xy-01) was used to cut the carbon tape into as small segments as possible (<0.1 mm).
We used the Regional Air Quality Model 2 (RAQM218), which implements a triple-moment modal aerosol dynamics module assuming a log-normal size distribution of the aerosol populations. This model describes the nature of the aerosol dynamical processes, such as nucleation, condensation, coagulation, dry deposition, grid-scale cloud condensation and ice nuclei activation, and the subsequent cloud microphysical processes (rainout) and the washout processes. A non-hydrostatic meteorological model (NHM)19 was used to produce the meteorological field. There were 215 × 259 grids with a 3 km horizontal grid resolution in both the NHM and RAQM2. There were 50 vertical layers to 50 hPa in the NHM, and 20 layers to 10 km in the RAQM2. The Japan Meteorological Agency (JMA) Meso-Regional Objective Analysis data sets (3 h, 5 km × 5 km) were used for the initial and boundary conditions for the NHM and for the spectral nudging method. The 137Cs released from the FNPP was tagged with a temporal resolution of 1 hour. We assumed 0.43 PBq (Plume 1) and 0.39 PBq (Plume 2) for the total amounts of 137Cs activity released from the FNPP by using the inventory of Katata et al.20. We used a number equivalent geometric mean dry diameter Dg,n,dry = 2.3 μm (an averaged value of the Cs-bearing particles 1 and 2), geometric standard deviation σg = 1.3, particle density ρp = 2.0 g/cm3, and hygroscopicity κ = 0 for Plume 1. For Plume 2, we used Dg,n,dry = 102 nm (measured by SMPS), σg = 1.6, ρp = 1.83 g/cm3, and κ = 0.4. The calculated dry deposition velocities of the particles in Plume 1 are approximately 4–5 times greater than those of the particles in Plume 2. For the particles in Plume 2, both the rainout and washout processes were considered, whereas for particles in Plume 1, only washout was considered because no cloud condensation nuclei activity is assumed (i.e., κ = 0).
This study was supported by MEXT KAKENHI (a Grant-in-Aid for Scientific Research on Innovative Areas under the A01-01 and A01-02 research teams in the “Interdisciplinary Study on Environmental Transfer of Radionuclides from the Fukushima Daiichi NPP Accident”; grant numbers 24110002 and 24110003, respectively) and the MEXT Japanese Radioactivity Survey. We acknowledge Mr. H. Sako and Mr. T. Kimura (Atox Co. ltd.) for their help with the IP and gamma spectrometry, Ms. C. Takeda (Tokyo Nuclear Services co. ltd.), Ms. K. Inukai, and Ms. K. Kamioka for their help with the HV sampling, and Mr. Y. Iizawa (Tokyo University of Science) for his help with finding the Cs-bearing particle 3. The PM2.5 filters sampled by Mr. K. Kuchiki and Dr. T. Aoki (MRI) were courteously provided for the present analyses.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/3.0/