Correction to: Scientific Reports https://doi.org/10.1038/s41598-018-32520-0, published online 24 September 2018

This Article contains an error in the Y axis of Figure 5, where ‘LIPSS height (μm)’ should read ‘LIPSS height (nm)’. The correct Figure 5 appears below as Figure 1.

Figure 1
figure 1

(a) AFM analysis of the LIPSSs height and aspect ratio A as function of fluence and scanning speed. (b) Average and standard deviation of structure profiles from fabricated nanopatterns with different A generated with: 3.12 J/cm2 and 200 μm/s (high A), 2.8 J/cm2 and 150 μm/s (intermediate A), 2.19 J/cm2 and 200 μm/s (low A).