Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Extreme flow simulations reveal skeletal adaptations of deep-sea sponges

Matters Arising to this article was published on 23 March 2022

Abstract

Since its discovery1,2, the deep-sea glass sponge Euplectella aspergillum has attracted interest in its mechanical properties and beauty. Its skeletal system is composed of amorphous hydrated silica and is arranged in a highly regular and hierarchical cylindrical lattice that begets exceptional flexibility and resilience to damage3,4,5,6. Structural analyses dominate the literature, but hydrodynamic fields that surround and penetrate the sponge have remained largely unexplored. Here we address an unanswered question: whether, besides improving its mechanical properties, the skeletal motifs of E. aspergillum underlie the optimization of the flow physics within and beyond its body cavity. We use extreme flow simulations based on the ‘lattice Boltzmann’ method7, featuring over fifty billion grid points and spanning four spatial decades. These in silico experiments reproduce the hydrodynamic conditions on the deep-sea floor where E. aspergillum lives8,9,10. Our results indicate that the skeletal motifs reduce the overall hydrodynamic stress and support coherent internal recirculation patterns at low flow velocity. These patterns are arguably beneficial to the organism for selective filter feeding and sexual reproduction11,12. The present study reveals mechanisms of extraordinary adaptation to live in the abyss, paving the way towards further studies of this type at the intersection between fluid mechanics, organism biology and functional ecology.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Skeletal motifs of E. aspergillum and associated flow physics.
Fig. 2: Effect of manipulations of the morphology of E. aspergillum on the flow downstream.
Fig. 3: Effect of manipulations of the morphology of E. aspergillum on helicity, enstrophy and drag coefficient.
Fig. 4: Role of the ridges in flow speed, vorticity, Q-structures and residence time within the body cavity.

Similar content being viewed by others

Data availability

STL files for all of the models, raw data for the plots, and scripts to reproduce the figures are available on GitHub at https://github.com/giacomofalcucci/Euplectella_HPC. Additional data that support the findings of this study are available from the corresponding author on request.

Code availability

All codes necessary to reproduce results in main paper are available on GitHub at https://github.com/giacomofalcucci/Euplectella_HPC.

References

  1. Owen, R. Description of a new genus and species of sponge (Euplectella aspergillum, O.). Trans. Zool. Soc. Lond. 3, 203–215 (1849).

    Google Scholar 

  2. Report on the Scientific Results of the Voyage of H.M.S. Challenger During the Years 1873–76 — Under the Command of Captain George S. Nares, R.N., F.R.S. and Captain Frank Turle Thomson, R.N. Vol. XXI, Zoology, Plates (Neill, 1887); https://archive.org/details/reportonscientif21grea/page/n13/mode/2up (2008).

  3. Weaver, J. C. et al. Hierarchical assembly of the siliceous skeletal lattice of the hexactinellid sponge Euplectella aspergillum. J. Struct. Biol. 158, 93–106 (2007).

    Article  CAS  Google Scholar 

  4. Aizenberg, J. et al. Skeleton of Euplectella sp.: structural hierarchy from the nanoscale to the macroscale. Science 309, 275–278 (2005).

    Article  ADS  CAS  Google Scholar 

  5. Monn, M. A., Weaver, J. C., Zhang, T., Aizenberg, J. & Kesari, H. New functional insights into the internal architecture of the laminated anchor spicules of Euplectella aspergillum. Proc. Natl Acad. Sci. USA 112, 4976–4981 (2015).

    Article  ADS  CAS  Google Scholar 

  6. Fernandes, M. C., Aizenberg, J., Weaver, J. C. & Bertoldi, K. Mechanically robust lattices inspired by deep-sea sponges. Nat. Mater. 20, 237–241 (2020).

    Article  ADS  Google Scholar 

  7. Succi, S. The Lattice Boltzmann Equation: For Complex States of Flowing Matter (Oxford Univ. Press, 2018).

  8. Kanari, S.-I., Kobayashi, C. & Ishikawa, T. An estimate of the velocity and stress in the deep ocean bottom boundary layer. J. Fac. Sci. Hokkaido Univ. Ser. 7 Geophys. 9, 1–16 (1991).

    Google Scholar 

  9. Doron, P., Bertuccioli, L., Katz, J. & Osborn, T. R. Turbulence characteristics and dissipation estimates in the coastal ocean bottom boundary layer from PIV data. J. Phys. Oceanogr. 31, 2108–2134 (2001).

    Article  ADS  Google Scholar 

  10. 26th ITTC Specialist Committee on Uncertainty Analysis (eds). In Proc. International Towing Tank Conf. Paper 7.5-02-01-03 https://ittc.info/media/4048/75-02-01-03.pdf (ITTC, 2011).

  11. Yahel, G., Eerkes-Medrano, D. I. & Leys, S. P. Size independent selective filtration of ultraplankton by hexactinellid glass sponges. Aquat. Microb. Ecol. 45, 181–194 (2006).

    Article  Google Scholar 

  12. Schulze, F. E. XXIV.—On the structure and arrangement of the soft parts in Euplectella aspergillum. Earth Environ. Sci. Trans. R. Soc. Edinb. 29, 661–673 (1880).

    Article  Google Scholar 

  13. Kitano, H. Computational systems biology. Nature 420, 206–210 (2002).

    Article  ADS  CAS  Google Scholar 

  14. Coveney, P. V., Boon, J. P. & Succi, S. Bridging the gaps at the physics-chemistry-biology interface. Phil. Trans. R. Soc. A 374, 20160335 (2016).

    Article  ADS  Google Scholar 

  15. Succi, S. et al. Towards exascale lattice Boltzmann computing. Comput. Fluids 181, 107–115 (2019).

    Article  MathSciNet  Google Scholar 

  16. Fung, Y. C. Biomechanics: Mechanical Properties of Living Tissues (Springer Science and Business Media, 2013).

  17. Marconi100, the new accelerated system. https://www.hpc.cineca.it/hardware/marconi100 (SuperComputing Applications and Innovation, 2020).

  18. Reitner, J. & Mehl, D. Early Paleozoic diversification of sponges; new data and evidences. Geol.-paläontol. Mitt. Innsbruck 20, 335–347 (1995).

    Google Scholar 

  19. Moore, T. J. XXVIII.—On the habitat of the Regadera (watering-pot) or Venus’s flower-basket (Euplectella aspergillum, Owen). J. Nat. Hist. 3, 196–199 (1869).

    Google Scholar 

  20. Leys, S. P., Mackie, G. O. & Reiswig, H. M. The biology of glass sponges. Adv. Mar. Biol. 52, 1–145 (2007).

    Article  CAS  Google Scholar 

  21. Gray, J. E. LXIV.—Venus’s flower-basket (Euplectella speciosa). Ann. Mag. Nat. Hist. 18, 487–490 (1866).

    Article  Google Scholar 

  22. Saito, T., Uchida, I. & Takeda, M. Skeletal growth of the deep-sea hexactinellid sponge Euplectella oweni, and host selection by the symbiotic shrimp Spongicola japonica (Crustacea: Decapoda: Spongicolidae). J. Zool. 258, 521–529 (2002).

    Article  Google Scholar 

  23. Chree, C. Recent advances in our knowledge of silicon and of its relations to organised structures. Nature 81, 206–208 (1909).

    Article  ADS  Google Scholar 

  24. Woesz, A. et al. Micromechanical properties of biological silica in skeletons of deep-sea sponges. J. Mater. Res. 21, 2068–2078 (2006).

    Article  ADS  CAS  Google Scholar 

  25. Monn, M. A., Vijaykumar, K., Kochiyama, S. & Kesari, H. Lamellar architectures in stiff biomaterials may not always be templates for enhancing toughness in composites. Nat. Commun. 11, 373 (2020).

    Article  ADS  CAS  Google Scholar 

  26. Nayar, K. G., Sharqawy, M. H. & Banchik, L. D. Thermophysical properties of seawater: a review and new correlations that include pressure dependence. Desalination 390, 1–24 (2016).

    Article  CAS  Google Scholar 

  27. Vogel, S. Current-induced flow through living sponges in nature. Proc. Natl Acad. Sci. USA 74, 2069–2071 (1977).

    Article  ADS  CAS  Google Scholar 

  28. Prandtl, L. & Tietjens, O. G. Applied Hydro- and Aeromechanics (transl. Den Hartog, J. P.) (Dover Publications, 1957).

  29. Tritton, D. J. Physical Fluid Dynamics 2nd edn Ch. 21 (Clarendon, 1988).

  30. Gualtieri, P., Casciola, C. M., Benzi, R., Amati, G. & Piva, R. Scaling laws and intermittency in homogeneous shear flow. Phys. Fluids 14, 583–596 (2002).

    Article  ADS  CAS  Google Scholar 

  31. Koehl, M. A. R. How do benthic organisms withstand moving water? Am. Zool. 24, 57–70 (1984).

    Article  Google Scholar 

  32. Yahel, G., Whitney, F., Reiswig, H. M., Eerkes-Medrano, D. I. & Leys, S. P. In situ feeding and metabolism of glass sponges (Hexactinellida, Porifera) studied in a deep temperate fjord with a remotely operated submersible. Limnol. Oceanogr. 52, 428–440 (2007).

    Article  ADS  CAS  Google Scholar 

  33. Hunt, J. C. R., Wray, A. & Moin, P. Eddies, Stream, and Convergence Zones in Turbulent Flows. Report CTR-S88 (Center for Turbulence Research, 1988).

  34. Haller, G. An objective definition of a vortex. J. Fluid Mech. 525, 1–26 (2005).

    Article  ADS  MathSciNet  Google Scholar 

  35. Krastev, V. K., Amati, G., Succi, S. & Falcucci, G. On the effects of surface corrugation on the hydrodynamic performance of cylindrical rigid structures. Eur. Phys. J. E 41, 95 (2018).

    Article  Google Scholar 

  36. Kawamura, T., Takami, H. & Kuwahara, K. Computation of high Reynolds number flow around a circular cylinder with surface roughness. Fluid Dyn. Res. 1, 145 (1986).

    Article  ADS  Google Scholar 

  37. Hanchi, S., Askovic, R. & Ta Phuoc, L. Numerical simulation of a flow around an impulsively started radially deforming circular cylinder. Int. J. Numer. Methods Fluids 29, 555–573 (1999).

    Article  ADS  CAS  Google Scholar 

  38. Sahin, M. & Owens, R. G. A numerical investigation of wall effects up to high blockage ratios on two-dimensional flow past a confined circular cylinder. Phys. Fluids 16, 1305–1320 (2004).

    Article  ADS  CAS  Google Scholar 

  39. Fujisawa, N., Tanahashi, S. & Srinivas, K. Evaluation of pressure field and fluid forces on a circular cylinder with and without rotational oscillation using velocity data from PIV measurement. Meas. Sci. Technol. 16, 989–996 (2005).

    Article  ADS  CAS  Google Scholar 

  40. Henderson, R. D. Detail of the drag curve near the onset of vortex shedding. Phys. Fluids 7, 2102–2104 (1995).

    Article  ADS  Google Scholar 

  41. Posdziech, O. & Grundmann, R. Numerical simulation of the flow around an infinitely long circular cylinder in the transition regime. Theor. Comput. Fluid Dyn. 15, 121–141 (2001).

    Article  CAS  Google Scholar 

  42. Succi, S. The Lattice Boltzmann Equation: For Fluid Dynamics and Beyond (Oxford Univ. Press, 2001).

  43. Norberg, C. An experimental investigation of the flow around a circular cylinder: influence of aspect ratio. J. Fluid Mech. 258, 287–316 (1994).

    Article  ADS  CAS  Google Scholar 

  44. Krüger, T. et al. The Lattice Boltzmann Method (Springer International, 2017).

  45. Montessori, A. & Falcucci, G. Lattice Boltzmann Modeling of Complex Flows for Engineering Applications (Morgan and Claypool, 2018).

  46. Falcucci, G. et al. Lattice Boltzmann methods for multiphase flow simulations across scales. Commun. Comput. Phys. 9, 269–296 (2011).

    Article  Google Scholar 

  47. Johnson, R. W. (ed.) Handbook of Fluid Dynamics (CRC, 2016).

Download references

Acknowledgements

G.F. acknowledges CINECA computational grant ISCRA-B IsB17–SPONGES, no. HP10B9ZOKQ and, partially, the support of PRIN projects CUP E82F16003010006 (principal investigator, G.F. for the Tor Vergata Research Unit) and CUP E84I19001020006 (principal investigator, G. Bella). G.P. acknowledges the support of the Forrest Research Foundation, under a postdoctoral research fellowship. M.P. acknowledges the support of the National Science Foundation under grant no. CMMI 1901697. S.S. acknowledges financial support from the European Research Council under the Horizon 2020 Programme advanced grant agreement no. 739964 (‘COPMAT’). G.F. and S.S. acknowledge K. Bertoldi, M. C. Fernandes and J. C. Weaver (Harvard University) for introducing them to E. aspergillum and for early discussions on the subject. A. L. Facci (Tuscia University) is acknowledged for discussions on graphics realization. M. Bernaschi (IAC-CNR) is acknowledged for discussions on extreme computing. V. Villani is acknowledged for his support with Japanese language and culture. E. Kaxiras (Harvard University) is acknowledged for early discussions that proved fruitful for the development of the present code.

Author information

Authors and Affiliations

Authors

Contributions

G.F. designed the research; G.F. and G.A. wrote the original lattice Boltzmann method code; G.A. extended the code for massively parallel computation, developed the GPU version for Marconi100, and helped collect and post-process the data; P.F. realized all of the models; V.K.K. ran the validation tests and helped in post-processing and data interpretation; G.F. created the figures; G.P. and M.P. led the biological framing of the results; G.F., M.P. and S.S. supervised the research and the interpretation of the results; G.F., G.P., M.P. and S.S. wrote the manuscript. All authors contributed to analysing the results of the simulations and revising the manuscript.

Corresponding author

Correspondence to Giacomo Falcucci.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature thanks Carlo Massimo Casciola and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data figures and tables

Extended Data Fig. 1 Detail of the grid resolution.

The grid resolution within the small fenestrae of E. aspergillum models is 5.33 lattice spacings.

Extended Data Fig. 2 Details of the flow field.

a, Tilted view of main text Fig. 1c, detailing the flow field downstream and within the body cavity of the complete model of E. aspergillum at Re = 2,000. Colour intensity indicates the helicity magnitude, and the streak lines are coloured according to the velocity magnitude. b, Stereo view of a.

Extended Data Fig. 3 Details of the vorticity field.

a, Visualization of the vorticity magnitude, complementing Extended Data Fig. 2a, such that colour intensity indicates the helicity magnitude, and the streak lines are coloured in green, based on the vorticity magnitude. b, Stereo view of a.

Extended Data Fig. 4 Morphological manipulations of the E. aspergillum model.

ai, Details of the nine variations of the hollow cylindrical lattice with helical ridges (P2), obtained by including random defects simulating wounds and scars. The nine morphological manipulations are identified as Mark01, Mark02, …, Mark09.

Extended Data Fig. 5 Details of the vorticity magnitude fields.

ae, Comparison between the vorticity magnitudes (colour scale) for the plain cylinder (S1, left panels) and for the hollow cylindrical lattice with helical ridges (P2, right panels) at statistical steady states, for all Re simulated in the present work. Panels ae show data for Re = 100, 500, 1,000, 1,500 and 2,000, respectively.

Extended Data Fig. 6 Details of the drag coefficient.

Zoomed-out view of main text Fig. 3c, with error bars identifying the range of predicted values of the drag coefficient CD due to random morphological manipulations. These variations lead to a modest decrease, from 2.5% to 3.5% in the drag coefficient with respect to the pristine model.

Extended Data Fig. 7 Views of the skeletal system of E. aspergillum.

The model is reconstructed according to ref. 3: left, side view; right, AA and BB cross-sections from the left panel, detailing the osculum and the body cavity, respectively.

Extended Data Fig. 8 Details of the E. aspergillum complete model.

a, Front (centre panel) and side (leftmost and rightmost) views of the complete model of E. aspergillum; b, stereo views of the complete model of E. aspergillum realized with the Anaglyph algorithm.

Extended Data Fig. 9 Lift coefficient CL.

Left, time trace at statistical steady state of the lift coefficient CL for the different models (see key at right) of E. aspergillum at Re = 2,000. The range of the oscillations in the porous models is two orders of magnitude less than that of the plain cylinder S1. Right, magnified view of boxed region.

Extended Data Table 1 Accuracy assessment
Extended Data Table 2 Main physical parameters at Re = 2,000
Extended Data Table 3 Details of resource allocation

Supplementary information

Supplementary Data

This zipped file contains the STL geometry of the complete E. aspergullum, as well as the STL files to realize models S2, P1 and P2. The simple cylinder model S1 is not provided.

Video 1 Comparison of the Vorticity Field generated by S1 and P2 models.

The Video shows the vorticity field generated by S1 (left) and P2 (right) models for Re=100, 500, 1,000, 1,500 and 2,000. The video highlights the formation of a nearly quiescent region downstream the porous model, as well as the vortical patterns within the body cavity.

Video 2 Comparison of the Vorticity Field for all models at Re=2,000

The video shows the vorticity field generated by S1 (top left), P1 (top right), S2 (bottom left) and P2 (bottom right) at Re=2,000. The two porous models are characterised by a nearly quiescent region extending several diameters downstream the structure.

Video 3 Detail pf the vorticity field generated by S1 and P2 at Re=2,000.

The video highlights the vorticity field downstream S1 (top) and P2 (bottom) models, as well as within the body cavity of P2.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Falcucci, G., Amati, G., Fanelli, P. et al. Extreme flow simulations reveal skeletal adaptations of deep-sea sponges. Nature 595, 537–541 (2021). https://doi.org/10.1038/s41586-021-03658-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41586-021-03658-1

This article is cited by

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing