Abstract
Achieving high brightness (where brightness is defined as optical power per unit area per unit solid angle) in semiconductor lasers is important for various applications, including direct-laser processing and light detection and ranging for next-generation smart production and mobility. Although the brightness of semiconductor lasers has been increased by the use of edge-emitting-type resonators, their brightness is still one order of magnitude smaller than that of gas and solid-state/fibre lasers, and they often suffer from large beam divergence with strong asymmetry and astigmatism. Here, we develop a so-called ‘double-lattice photonic crystal’, where we superimpose two photonic lattice groups separated by one-quarter wavelength in the x and y directions. Using this resonator, an output power of 10 W with a very narrow-divergence-angle (<0.3°) symmetric surface-emitted beam is achieved from a circular emission area of 500 μm diameter under pulsed conditions, which corresponds to a brightness of over 300 MW cm−2 sr−1. In addition, an output power up to ~7 W is obtained under continuous-wave conditions. Detailed analyses on the double-lattice structure indicate that the resonators have the potential to realize a brightness of up to 10 GW cm−2 sr−1, suggesting that compact, affordable semiconductor lasers will be able to rival existing gas and fibre/disk lasers.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Ross, T. S. & Latham, W. P. Appropriate measures and consistent standard for high energy laser beam quality. J. Directed Energy 2, 22–58 (2006).
Shukla, P., Lawrence, J. & Zhang, Y. Understanding laser beam brightness: a review and new prospective in material processing. Opt. Laser Technol. 75, 40–51 (2015).
Paschke, K. et al. High power and high spectral brightness in 1060 nm α-DFB lasers with long resonators. Electron. Lett. 39, 369–370 (2003).
Lim, J. J. et al. Design and simulation of next-generation high-power, high-brightness laser diodes. IEEE J. Sel. Topics Quantum Electron. 15, 993–1008 (2009).
Crump, P. et al. Efficient high-power laser diodes. IEEE J. Sel. Top. Quantum Electron. 19, 1501211 (2013).
Treusch, H.-G. et al. High-brightness semiconductor laser sources for materials processing: stacking, beam shaping, and bars. IEEE J. Sel. Top. Quantum Electron. 6, 601–614 (2000).
Li, H. et al. Reliable high-efficiency high-brightness laser diode bars at 940 nm. Opt. Laser Technol. 36, 327–329 (2004).
Karow, M. M. et al. Efficient 600-W-laser bars for long-pulse pump applications at 940 and 975 nm. IEEE Photon. Technol. Lett. 29, 1683–1686 (2017).
Miah, M. J. et al. 1.9 W continuous-wave single transverse mode emission from 1060 nm edge-emitting lasers with vertically extended lasing area. Appl. Phys. Lett. 105, 151105 (2014).
Gründl, T. et al. Record single-mode, high-power VCSELs by inhibition of spatial hole burning. IEEE J. Sel. Top. Quantum Electron. 19, 1700913 (2013).
Seurin, J.-F. et al. High-brightness pump sources using 2D VCSEL arrays. Proc. SPIE 7615, 76150F (2010).
Siegman, A. E. New developments in laser resonators. Proc. SPIE 1224, 2–14 (1990).
Chang-Hasnain, C. J. et al. Transverse mode characteristics of vertical cavity surface-emitting lasers. Appl. Phys. Lett. 57, 218–220 (1990).
Siegman, A. E. Defining, measuring, and optimizing laser beam quality. Proc. SPIE 1868, 2–12 (1993).
Wenzel, H.et al. Theoretical and experimental analysis of the lateral modes of high-power broad-area lasers. Proceedings of Numerical Simulation of Optoelectronic Devices (NUSOD) 143–144 (2011).
Crump, P. et al. Experimental and theoretical analysis of the dominant lateral waveguiding mechanism in 975 nm high power broad area diode lasers. Semicond. Sci. Technol. 27, 045001 (2012).
Winterfeldt, M., Crump, P., Wenzel, H., Erbert, G. & Tränkle, G. Experimental investigation of factors limiting slow axis beam quality in 9xx nm high power broad area diode lasers. J. Appl. Phys. 116, 063103 (2014).
Sverdlov, B. et al. Optimization of fiber coupling in ultra-high power pump modules at λ = 980nm. Proc. SPIE 8605, 860508 (2013).
Sumpf, B. et al. High-brightness quantum well tapered lasers. IEEE J. Sel. Topics Quantum Electron. 13, 1009–1020 (2009).
Imada, M., Noda, S., Chutinan, A. & Tokuda, T. Coherent two-dimensional lasing action in surface-emitting laser with triangular-lattice photonic crystal structure. Appl. Phys. Lett. 75, 316–318 (1999).
Riechel, S., Kallinger, C., Lemmer, U. & Feldmann, J. A nearly diffraction limited surface emitting conjugated polymer laser utilizing a two-dimensional photonic band structure. Appl. Phys. Lett. 77, 2310–2312 (2000).
Noda, S., Yokoyama, M., Imada, M., Chutinan, A. & Mochizuki, M. Polarization mode control of two-dimensional photonic crystal laser by unit cell structure design. Science 293, 1123–1125 (2001).
Ryu, H.-Y., Kwon, S.-H., Lee, Y.-J., Lee, Y.-H. & Kim, J.-S. Very-low-threshold photonic band-edge lasers from free-standing triangular photonic crystal slabs. Appl. Phys. Lett. 80, 3476–3478 (2002).
Miyai, E. et al. Lasers producing tailored beams. Nature 441, 946 (2006).
Kim, M. et al. Surface-emitting photonic-crystal distributed-feedback laser for the midinfrared. Appl. Phys. Lett. 88, 191105 (2006).
Matsubara, H. et al. GaN photonic-crystal surface-emitting laser at blue-violet wavelengths. Science 319, 445–447 (2008).
Kurosaka, Y. et al. On-chip beam-steering photonic-crystal lasers. Nat. Photon. 4, 447–450 (2010).
Hirose, K. et al. Watt-class high-power, high-beam-quality photonic crystal lasers. Nat. Photon. 8, 406–411 (2014).
Liang, Y., Peng, C., Sakai, K., Iwahashi, S. & Noda, S. Three-dimensional coupled-wave model for square-lattice photonic crystal lasers with transverse electric polarization: a general approach. Phys. Rev. B 84, 195119 (2011).
Liang, Y., Peng, C., Sakai, K., Iwahashi, S. & Noda, S. Three-dimensional coupled-wave analysis for square-lattice photonic-crystal lasers with transverse electric polarization: finite-size effects. Opt. Express 20, 15945–15961 (2012).
Yoshida, M. et al. Fabrication of photonic-crystal structures by tertiary-butyl arsine-based metal–organic vapor-phase epitaxy for photonic-crystal lasers. Appl. Phys. Express 9, 062702 (2016).
Acknowledgements
This work was supported by the ACCEL programme commissioned by the Japan Science and Technology Agency (JST) and the Photon Frontier Network Program of the Ministry of Education, Culture, Sports, Science and Technology (MEXT), and is supported by the New Energy and Industrial Technology Development Organization (NEDO). M.Y. also acknowledges support by a Grant-in-Aid for JSPS Fellows. The authors thank S. Yagi, H. Kitagawa, A. Watanabe, E. Miyai, and W. Kunishi for fruitful discussions.
Author information
Authors and Affiliations
Contributions
S.N. designed and directed this work. M.Y. fabricated the device with K.I. and M.D.Z. M.Y. measured the lasing characteristics with M.K. Y.T. and J.G. conducted the theoretical analysis of the device. H.R. performed epitaxial growth for the device. M.D.Z and B.S assembled the device. M.Y. wrote the manuscript with S.N. and J.G.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary Sections 1–5, Supplementary Figures 1–5, Supplementary References 1–14
Rights and permissions
About this article
Cite this article
Yoshida, M., De Zoysa, M., Ishizaki, K. et al. Double-lattice photonic-crystal resonators enabling high-brightness semiconductor lasers with symmetric narrow-divergence beams. Nature Mater 18, 121–128 (2019). https://doi.org/10.1038/s41563-018-0242-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41563-018-0242-y
This article is cited by
-
Continuous-wave operation of 1550 nm low-threshold triple-lattice photonic-crystal surface-emitting lasers
Light: Science & Applications (2024)
-
Controlled formation of three-dimensional cavities during lateral epitaxial growth
Nature Communications (2024)
-
Automated catastrophic optical damage inspection of semiconductor laser chip based on multi-scale strip convolution aggregation
International Journal of Machine Learning and Cybernetics (2024)
-
Strong coupling in plasmonic metal nanoparticles
Nano Convergence (2023)
-
Compact structured light generation based on meta-hologram PCSEL integration
Discover Nano (2023)