Introduction

The nonreciprocal transport of propagating particles or quasiparticles in noncentrosymmetric materials has opened up various avenues for research on symmetry-related physical phenomena as well as potential applications in optical isolators, circulators, and microwave diodes over a broad range of frequencies1,2,3. On the basis of symmetry arguments, a striking electrical manifestation of inversion symmetry breaking is the emergence of nonreciprocal charge transport, i.e., inequivalent rightward and leftward currents4. Under further breaking time inversion symmetry via applying a magnetic field B, nonreciprocal charge transport characterized by the current-direction I-dependent nonlinear resistivity \(R({\mathbf{B}},{\mathbf{I}})\) can be expressed as5,6,7

$$R\left( {{\mathbf{B}},{\mathbf{I}}} \right) = R_0\left( {1 + \beta {\mathbf{B}}^2 + \gamma {\mathbf{B}} \cdot {\mathbf{I}}} \right)$$
(1)

where R0, β, and γ are the resistance at zero magnetic field, the coefficient of the normal magnetoresistance, and the nonreciprocal coefficient, respectively. In this context, the nonreciprocal response scales linearly with both the applied electric current and the magnetic field, which has been recently discovered in polar semiconductors6, topological insulators (TIs)8, and several interface/surface Rashba systems9 with spin-momentum locked bands. Unlike magnetoresistance in ferromagnet/heavy metals (FM/HMs) or FM/TI bilayers, in which the FM layer plays an essential role as a source of spin-dependent scattering, the nonreciprocal charge transport in noncentrosymmetric materials without FM layers introduces a new paradigm of unidirectional magnetoresistance (UMR) as a consequence of the second-order response to the electric field10,11,12,13,14. Such a UMR sparks a surge of interest in realizing two-terminal rectification, memory, and logic devices7,14,15. To date, more efforts to hunt for the materials with larger γ values by taking the spin–orbit interaction and Fermi energy into account are being made in interface/surface Rashba systems9,15,16. However, given the low Rashba spin splitting energy, e.g., 3 meV (~35 kB) in LaAlO3/SrTiO39, 5 meV (~58 kB) in Ge(111)15, nonreciprocal transport can only be observed at very low temperature, and here γ-value decreases dramatically with increasing temperature due to the thermal fluctuation. To exploit the numerous possible applications in Rashba systems, the preservation of nonreciprocal charge transport at room temperature is vigorously pursued.

Although Rashba effect is commonly associated with low-dimensional systems and heterostructures, the recent discovery of sizeable Rashba splitting in bulk materials has attracted much attention17,18,19. α-GeTe, one of the emergent ferroelectric Rashba semiconductors, has a noncentrosymmetric crystal structure up to a high critical temperature Tc ~ 700 K20,21,22. As theoretically predicted and experimentally verified, α-GeTe forms a giant bulk Rashba-type spin splitting with the largest observed Rashba constant up to α ~ 5 eV Å and hosts electric field-controlled Rashba-type spin textures as well23,24,25. Furthermore, the corresponding spin splitting energy in α-GeTe, proportional to α2, reaches up to ~200 meV (~2300 kB)23, one order of magnitude stronger than the thermal energy kBT at room temperature, which thus makes it as a prominent platform to realize the nonreciprocal charge transport even at room temperature. In this work, we demonstrate the existence of nonreciprocal charge transport up to 300 K originating from the bulk Rashba states in α-GeTe. Nonreciprocal coefficient γ exhibits a non-monotonic dependence with increasing temperature T. The physical mechanism underlying the characteristics can be understood by combining the angle-resolved photoelectron spectroscopy (ARPES) measurements and theoretical calculations.

Results and discussion

Basic characterizations

We fabricated the Te-terminated α-GeTe films on Al2O3 (0001) substrates by molecular beam epitaxy (MBE). The rhombohedral crystal structure of α-GeTe (space group R3m) with the displaced adjacent Ge and Te layers is schematically presented in Fig. 1a. Such a noncentrosymmetric structure manifests itself as the ferroelectric order P along c axis and the Rashba-type spin–orbit splitting bands26. To verify the Rashba-type splitting, we performed in situ ARPES measurements using the photon energy of hν = 21.2 eV. Figure 1b shows the map of electronic band structure along the high-symmetry direction \(\overline {\Gamma} - \overline {\mathrm{K}}\), in which the Rashba splitting is most pronounced. The energy dispersion of bulk Rashba states presents a momentum splitting along \(\overline {\Gamma} - \overline {\mathrm{K}}\) with Δk ≈ 0.1 Å−1 and the giant Rashba parameter around 4.3 eV Å, in good agreement with other reports and calculations for Te-terminated α-GeTe23,24,25,26,27. We also resolve the band-crossing point (BCP) of bulk Rashba state at \({\bar{\mathrm{{\Gamma}}}}\), which is located ~0.14 eV below the Fermi level. Meanwhile, the surface states crossing the Fermi level at significantly higher momenta are also clearly discernable, in particular their linear dispersions in the vicinity of the \({\bar{\mathrm{{\Gamma}}}}\) point. In addition, the Fermi level position μ is nearly independent of the temperature T, as shown in Supplementary Fig. 4.

Fig. 1: Basic characterizations of α-GeTe films.
figure 1

a Schematic illustration of rhombohedral crystal structure of α-GeTe. b ARPES band map along \(\overline {\mathrm{K}} - \overline {\Gamma} - \overline {\mathrm{K}}\) direction measured at 5 K. The red and blue dashed curves trace the surface and bulk Rashba states, respectively. c Temperature dependence of the resistivity ρxx. The inset is an optical image of α-GeTe device. d Experimental value of the carrier concentration n, as well as the theoretical predication, is plotted as functions of temperature. The inset shows a representative example of the Hall resistivity Rxy with the magnetic field at 10 K.

Full size image

α-GeTe thin film is patterned into Hall devices for transport measurements (see “Methods”). Figure 1c shows the temperature dependence of the resistivity of α-GeTe. Unlike a usual semiconductor, α-GeTe shows a low resistivity ρ ~ 0.12 mΩ cm at 300 K and a metallic behavior down to 3 K is observed clearly in its temperature dependence. Hall measurements display a linear dependence of the Hall resistances Rxy on the applied magnetic field, a typical ordinary Hall effect in a usual semiconductor with the conventional single carrier, as shown in the inset of Fig. 1d. The positive slope indicates that the dominant carriers are holes (P-type) in α-GeTe films. This is also confirmed via ARPES measurement, which demonstrates that Fermi surface lies in the valence band. As shown in Fig. 1d, the extracted carrier concentration n decreases from 3.0 × 1020 cm−3 at 300 K to a minimum 2.8 × 1020 cm−3 at 100 K, then it increases upon further lowering the temperature. Below ~15 K, the carrier concentration reaches a saturation value 2.9 × 1020 cm−3. Although the carrier concentration shows anomalous temperature dependence from 3 to 300 K, its absolute change in the magnitude remains weak, revealing a negligible shift of Fermi level with temperature. According to previous reports, the metallic resistivity and high P-type carrier concentrations are ascribed to the natural tendency for Ge deficiency in α-GeTe films28,29,30,31. However, the anomalous temperature-dependent carrier concentration remains puzzling, which will be discussed later.

Nonreciprocal transport response

To explore the existence of nonreciprocal transport response, we performed angular-dependent ac harmonic measurements. The first (Rω) and the second-harmonic resistance (R2ω) upon injecting sinusoidal ac current \(\tilde I_\omega\) into devices are simultaneously detected during the rotation of the applied magnetic field in three different geometries, as illustrated in Fig. 2a. The rotation angles in xy, yz, and zx planes are defined with respect to +x, +z, and +z axis, respectively. Under a fixed strength of the magnetic field B = 9 T and at T = 10 K, the angle-dependent Rω is found to be a sinusoidal curve with a period of 180° in all measurement geometries (see Supplementary Fig. 8), while R2ω in the xy and yz planes displays a sinusoidal angular dependence with nearly same amplitude and a period of 360°, as shown in Fig. 2b. In contrast, R2ω is vanishingly small when rotating the magnetic-field angle in xz plane. These results indicate that R2ω follows \({\mathbf{I}} \cdot ({\mathbf{P}} \times {\mathbf{B}})\) with the polarization P along +z direction and reaches its maximum value when B is applied along the +y axis.

Fig. 2: Unidirectional magnetoresistance in α-GeTe films.
figure 2

a Schematic diagram of ac harmonic measurement configurations with ac current applied along x-axis. b Dependence of the second-harmonic longitudinal resistance R2ω on angles in three different geometries with the current density \(j = 7.5 \times 10^5{\mathrm{Acm}}^{ - 2}\) at 10 K and 9 T. c \(R_{2\omega }\) as a function of in-plane magnetic-field angle (xy-scan) at 300 K under various magnetic fields, where the symbols are experimental data and the solid curves are the fits to \({\mathrm{{\Delta}}}R_{2\omega }{\mathrm{sin}}\varphi\). d Magnetic field-dependent \({\mathrm{{\Delta}}}R_{2\omega }\) extracted from c with \(j = 7.5 \times 10^5{\mathrm{Acm}}^{ - 2}\). e \({\mathrm{{\Delta}}}R_{2\omega }\) as a function of the applied ac current amplitude at 300 K and 9 T. f Temperature dependence of γ. The cyan symbols are the experimental results and the red line is from the theoretical predication.

Full size image

As shown in Fig. 2c, even at 300 K, we still observed an angular-dependent \(R_{2\omega }\), following \(R_{2\omega } = {\mathrm{{\Delta}}}R_{2\omega }{\mathrm{sin}}\varphi\) at a fixed injected current density \(j = 7.5 \times 10^5\;{\mathrm{Acm}}^{ - 2}\) in the xy rotation plane with different magnetic-field strengths. Here, \({\mathrm{{\Delta}}}R_{2\omega }\) denotes the amplitudes of the angular-dependent \(R_{2\omega }\) and φ represents the angle between the applied magnetic field and +x. Remarkably, \(R_{2\omega }\) changes sign when reversing the magnetic field, demonstrating a characteristic UMR. The values of \({\mathrm{{\Delta}}}R_{2\omega }\) were extracted at varied magnetic field B, as plotted in Fig. 2d. The \({\mathrm{{\Delta}}}R_{2\omega }\) clearly scales linearly with B with a negligible intercept. Moreover, the angular-dependent \(R_{2\omega }\) is also measured by varying the current density j at a fixed magnetic field B = 9 T. The values of \({\mathrm{{\Delta}}}R_{2\omega }\) show a linear dependence of j, as shown in Fig. 2e. The UMR with a bilinear magnetoresistance characteristic, \({\mathrm{{\Delta}}}R_{2\omega }\) proportional to both the applied magnetic field B and the injected current j, was observed, which unambiguously verifies the existence of the nonreciprocal charge transport in α-GeTe. Similar UMR characteristics were also observed in other nonmagnetic noncentrosymmetric systems with spin-momentum locking, such as BiTeBr6, WTe232, and SrTiO39, which are distinct from those in FM/HM and FM/TI systems. The UMR in FM/HM or FM/TI originates from the spin accumulation at the interfaces induced by the spin Hall effect or the Rashba–Edelstein effect and complies with the chiral rule \(({\mathbf{j}} \times {\hat{\mathbf{z}}}) \cdot {\mathbf{M}}\) with the magnetization M10,11,12,33. Thus, the values of \({\mathrm{{\Delta}}}R_{2\omega }\) in these heterostructures are also linear with the magnitude of the applied ac current and reach a saturated value at the saturation of M10,11. According to the Rashba Hamiltonian \(\alpha ({\mathbf{k}} \times {\upsigma}) \cdot {\hat{\mathbf{z}}}\), the shift of wave vector Δk upon injecting charge current j gives rise to the term \(\alpha \left( {{\mathrm{{\Delta}}}{\mathbf{k}} \times {\upsigma}} \right) \cdot {\hat{\mathbf{z}}}\sim ({\hat{\mathbf{z}}} \times {\mathbf{j}}) \cdot \sigma\), which means that a pseudomagnetic field ~\({\hat{\mathbf{z}}} \times {\mathbf{j}}\) acts on the spins σ resulting in the asymmetric spin-dependent scattering (i.e., UMR)15,34.

Furthermore, the nonreciprocal coefficient γ over a temperature range of 3–300 K in α-GeTe can be extracted by \(\gamma = 2{\mathrm{{\Delta}}}R_{2\omega }/(R_0BI)\)6. Figure 2f reports γ as a function of temperature T. We note that γ has the same order of magnitude over the entire temperature range. Upon increasing temperature, γ decreases slightly from 1.60 × 10−3 A−1 T−1 at 3 K to a minimum 1.55 × 10−3 A−1 T−1 at 50 K, and then increases to 2.34 × 10−3 A−1 T−1 at about 200 K. As the temperature increases from 200 to 300 K, γ monotonically decreases to 1.95 × 10−3 A−1 T−1. The observed temperature-dependent γ(T) is remarkably distinct from those reported in other Rashba systems, in which γ significantly decreases to a very low value with increasing temperature to only a few tens of Kelvin6,9,15. The remarkable trend of γ(T) from 3 K to the room temperature was reconfirmed in other α-GeTe films, as shown in Supplementary Fig. 13. This unambiguously indicates that the feature displayed in Fig. 2f is authentic and one of the characteristic properties of α-GeTe. The toy model based on the pseudomagnetic field discussed above is unable to properly reproduce the temperature dependence of γ15. To date, two scenarios have been proposed to explain the temperature-dependent γ(T). One is associated with shift of Fermi level driven by temperature, which was used to interpret the temperature-dependent nonlinear magnetotransport observed in semimetal WTe232. The other scenario involves the density of occupied states modulated by the temperature-dependent Fermi–Dirac distribution function6. This model could be applied to α-GeTe by considering the fact that the Fermi level position only slightly varies with the temperature, as confirmed via ARPES and carrier concentration measurements. Furthermore, in contrast with most systems investigated previously, α-GeTe possesses both surface and bulk Rashba states; henceforth, their relative contributions to the magnetotransport and in particular to the temperature dependence of γ requires further scrutiny. In the following part, the contributions from both the surface and bulk Rashba states to the nonreciprocal charge transport in α-GeTe are theoretically analyzed.

Theoretical analysis of nonreciprocal charge transport

On the basis of the fundamental symmetry principles, Onsager reciprocal theorem allows the nonreciprocal response existing in the systems without the inversion symmetry when the time reversal symmetry is also broken4,5. Furthermore, the broken inversion symmetry manifests itself as the Rashba-type spin splitting of energy bands with spin-momentum locking35,36. Therefore, nonreciprocal charge transport can be investigated using Boltzmann transport equation in Rashba-type bands6. Here, we firstly construct the physical picture for the nonreciprocal transport of α-GeTe by extending the nonlinear second-order spin–orbit coupled magnetotransport model6,8,37,38. This model was successfully employed to interpret the bilinear magnetoresistance of TI Bi2Se3 by taking into account of the first- and second-order correction of the carrier distribution. For the sake of simplicity and without loss of generality, we only discuss a 2D Rashba system and neglect the variation of the Rashba constant α with temperature6. Figure 3a shows a schematic of the valence band structures with Rashba-type spin splitting in momentum space (kx, ky), described by the Rashba Hamiltonian \(h = \frac{{\hbar \left( {k_x^2 + k_y^2} \right)}}{{2m^ \ast }} + \alpha ( {k_x\sigma _y - k_y\sigma _x} )\) with α = 4.3 eVÅ, the Pauli matrices σx (σy), and the effective mass of carrier m*. The Fermi surfaces consist of two identical spin helicities above the BCP at zero magnetic field is defined as the zero-point energy), whereas there are two opposite spin helicities below BCP, as illustrated in Fig. 3b, c. When applying an electric field Ex, the Fermi contours shift along the kx direction. The carrier distribution function is expanded as \(f = f_0 + f_1 + f_2 + O\left( {k^3}\right)\). Here, f0 is the equilibrium Fermi–Dirac distribution function and \(f_n = \left( {\frac{{e\tau E_x}}{\hbar }\frac{\partial }{{\partial k_x}}} \right)^nf_0\) is the n-order correction to f0 with the scattering time τ, the elementary charge e and the Planck’s constant \(\hbar\). The first-order distribution f1 gives rise to the first-order charge current \(J_x^1 = e{\int} {\frac{{d^2{\mathbf{k}}}}{{\left( {2\pi } \right)^2}}v\left( {\mathbf{k}} \right)f_1({\mathbf{k}})}\) with group velocity v(k) and Fermi contours subsequently generate an extra imbalance of spin population known as the Rashba–Edelstein Effect34,39. In addition, a nonlinear spin current \(J_S^2\left( {E_x^2} \right)\) is also simultaneously triggered by the second-order distribution f2 combined with the spin-momentum locking in Rashba bands40. Note that the nonlinear spin current \(J_S^2(E_x^2)\) due to carriers with energy below the BCP (Fig. 3c) is partially compensated because the spin chirality of the inner Fermi contour is opposite to that of the outer one. In contrast, for carriers with energy above the BCP (Fig. 3b), \(J_{\mathrm{S}}^2\left( {E_x^2} \right)\) is enhanced due to the cooperative contributions of the identical spin helicities. When an external magnetic field is applied along the +y or −y direction, \(J_{\mathrm{S}}^2(E_x^2)\) is partially converted into a magnetic field-direction dependent second-order charge current \(J_x^2(E_x^2)\) (denoted by \(J_x^2\) below), giving rise to a UMR (i.e., nonreciprocal charge transport), as shown in Fig. 3d–e.

Fig. 3: The physical figure of UMR in 2D nonmagnetic Rashba systems.
figure 3

a Sketch of 2D Rashba-type band structures at equilibrium. b Top: schematics of Fermi contours (dash circles) above BCP. The outer and inner contours hold the identical spin helicities. The red and purple arrows represent the spin-up and spin-down states, respectively. An applied electric field Ex along kx axis induces a shift of the Fermi contours (solid circles) toward kx axis, resulting in an imbalance of carrier occupation on two sides of the Fermi contours. Middle: illustrations of first-order f1 (filled in light red or light purple color codes) and second-order f2 (filled in dark red or dark purple color codes) corrections to the equilibrium distribution function f0 in Ex. The parts of f1 and f2 above k axis depict excess of carrier along the arrow direction, whereas other parts below k axis denote depletion of the same. Bottom: the second-order spin current \(J_{\mathrm{S}}^2(E_x^2)\) induced by Ex. c Top: schematics of Fermi contours with Ex (solid circles) and without Ex (dash circles) below BCP. The outer and inner contours depict the opposite spin helicities. The corresponding f1 and f2 is illustrated in middle panel. In this case, \(J_{\mathrm{S}}^2\left( {E_x^2} \right)\) is partially canceled due to the opposite spin helicities (bottom panel). d, e \(J_{\mathrm{S}}^2(E_x^2)\) is partially converted into a nonlinear charge current \(J_x^2(E_x^2)\) under applied magnetic field B. The state with B parallel (antiparallel) to the spin polarization direction corresponds to a low (high) resistance state.

Full size image

The second-order charge current is further quantified in the following calculations. The Rashba Hamiltonian with in-plane magnetic field By oriented along y axis reads as

$$H = \frac{{\hbar ( {k_x^2 + k_y^2} )}}{{2m^ \ast }} + \alpha ( {k_x\sigma _y - k_y\sigma _x} ) - \frac{1}{2}g\mu _{\mathrm{B}}B_y\sigma _y$$
(2)

Here, g and μB are the Landé g-factor and the Bohr magneton, respectively6,41. For a given applied magnetic field, the typical band dispersion of the Rashba gas is depicted in Fig. 4a and can be parsed into three energy regions. The applied magnetic field gives rise to an energy shift with a value of \(g\mu _{\mathrm{B}}| {B_y}|\), corresponding to energy region I \(( { - \frac{{g\mu _{\mathrm{B}}| {B_y}|}}{2} - \frac{{m^ \ast \alpha ^2}}{{2\hbar ^2}} {\,}<{\,} E {\,}<{\,} \frac{{g\mu _{\mathrm{B}}| {B_y}|}}{2} - \frac{{m^ \ast \alpha ^2}}{{2\hbar ^2}}})\). Due to the giant pseudomagnetic field of the Rashba spin–orbit coupling up to ~120 T, the region I is narrow under our experimental magnetic field ~9 T. Furthermore, the inner and outer Rashba Fermi contours host opposite spin helicities below BCP (region III \(E < \frac{{\hbar ^2}}{{2m^ \ast \alpha ^2}}( {\frac{{g\mu _{\mathrm{B}}B_y}}{2}})^2\)), whereas they display identical spin helicities above BCP (region I and region II \(\frac{{\hbar ^2}}{{2m^ \ast \alpha ^2}}( {\frac{{g\mu _{\mathrm{B}}B_y}}{2}})^2 {\,}< {\,}E {\,}<{\,} - \frac{{g\mu _{\mathrm{B}}| {B_y}|}}{2} - \frac{{m^ \ast \alpha ^2}}{{2\hbar ^2}}\)). The second-order charge current \(J_x^2\) is given by the following integral,

$$J_x^2 = e{\int} {\frac{{d^2{\mathbf{k}}}}{{\left( {2\pi } \right)^2}}v\left( {\mathbf{k}} \right)f_2\left( {\mathbf{k}} \right)}$$
(3)

At a fixed Ex, \(J_x^2\) is proportional to the experimental \({\Delta}R_{2\omega }\) \(\left( {J_x^2 \propto {\Delta}R_{2\omega }} \right)\) (see Supplementary Information)32.

Fig. 4: Theoretical calculations for second-order charge current \(J_x^2\).
figure 4

a Scheme of 2D Rashba-type bands under the in-plane magnetic field By. b The calculated \(J_x^2\) (in unit of \(\eta = 0.5{\mathrm{m}}^{ \ast - 1}\alpha ^{ - 1}\hbar ^{ - 2}E_x^{ - 2}e^3\tau ^2\)) as functions of the applied magnetic field By at different Fermi level position at 0 K. c Evolution of \(J_x^2\) as functions of Fermi level position at By = 10 T at various temperatures. The three-color codes correspond to the three energy regions in a. d Temperature dependence of Γ at various Fermi levels. For comparison, Γ is multiplied by different factors.

Full size image

Nonreciprocal charge transport manifests itself as a bilinear magnetoresistance, that is, ΔR2ω scales linearly with both the injected charge current and the applied magnetic field. The former is implicit in Eq. (3), whereas the latter is numerically calculated in the following. Figure 4b summarizes the dependence of \(J_x^2\) as a function of B for various Fermi level positions μ. \(J_x^2\) increases linearly with B at μ = 0.13 eV and 0.066 eV (region II). Besides, \(J_x^2\) nonlinearly changes with B at μ = 0.18 eV (region I) and T = 0 K, and then \(J_x^2(B)\) returns to the linear relationship with increasing temperature (see Supplementary Fig. 2). In those cases, the change in sign of \(J_x^2\) occurs when reversing magnetic field B. In addition, the magnitude of \(J_x^2\) is mostly negligible at all magnetic fields with μ = −0.066 eV (region III). Therefore, as described above, the characteristics of bilinear magnetoresistances reappear in the nonlinear second-order spin–orbit coupled magnetotransport model.

To identify the relative contributions of surface and bulk Rashba states in the nonreciprocal charge transport, we calculated the dependence of \(J_x^2\) on the Fermi level position μ based on Eq. (3), as illustrated in Fig. 4c. \(J_x^2\) exhibits a significant enhancement with a peak in region I and gradually decreases as Fermi level position shifts toward the lower energy in region II and then fades away with Fermi surface across BCP into region III. It is shown that \(J_x^2\) is quite sensitive to μ. In addition, the peak of \(J_x^2\) in region I progressively sinks upon increasing the temperature. Note that \(J_x^2\) in region III is nearly negligible in comparison with those in region I and II, demonstrating that the contributions of two opposite spin helicities to \(J_x^2\) compensate each other. These theoretical results provide a guideline to distinguish the contributions of surface and bulk Rashba states in the nonreciprocal charge transport. As shown in Fig. 1b, the band structure of α-GeTe includes bulk as well as surface Rashba states. Based on ARPES measurements, the Fermi level lies below BCP for surface Rashba states, but above BCP for bulk Rashba states. As a consequence, it is reasonable to claim that the bulk Rashba rather than surface states are the dominant contribution to the nonreciprocal charge transport in α-GeTe.

To gain further insight into the temperature-dependent γ(T), we calculated the dependence of \({\mathrm{{\Gamma}}}\left( T \right) = \left[ {\gamma \left( T \right) - \gamma \left( {0{\mathrm{K}}} \right)} \right]/\gamma \left( {0{\mathrm{K}}} \right)\), the fractional difference of γ at T and at 0 K, as a function of the temperature for various values of μ. To do so, we only consider the temperature-related broadening of the distribution functions. As plotted in Fig. 4d, Γ decreases monotonically with increasing temperature at μ = 0.18 eV and μ = 0.039 eV, which has been well documented in previous reports6,9,15. In comparison, a novel temperature dependence Γ(T) is observed at μ = 0.066 eV, indicating γ increases monotonically as temperature increases, which has never been reported before. Assigning μ = 0.14 eV, Γ(T) shows a non-monotonic evolution with temperature, indicating that γ increases upon increasing the temperature below ~200 K and then decreases as the temperature rises, which is in excellent qualitative agreement with our experimental observations (Fig. 2f). In particular, the calculated Fermi level position μ = 0.14 eV is also comparable with that of ARPES measurements, as shown in Fig. 1b. Consequently, it can be concluded that the temperature dependence of γ(T) derives from the variation of carrier occupation states with temperature and the sensitivity of \(J_x^2\) to the Fermi level position. This conclusion is further supported by the consistency between the experimental and theoretical temperature dependence of the carrier concentration, \(n = {\int} {\frac{{f_0d^3{\mathbf{k}}}}{{(2\pi )^3}}}\), as shown in Fig. 1d.

In summary, we unambiguously demonstrated the existence of nonreciprocal charge transport up to room temperature in Rashba semiconductor α-GeTe, in which both the surface and bulk Rashba states exist. The nonreciprocal charge transport yields a UMR with a bilinear magnetoresistance characteristic. More interestingly, we observed an unconventional temperature-dependent nonreciprocal coefficient γ, in which γ increases with raising temperature below 200 K and monotonically decreases in the range of 200–300 K. To understand the physics underlying these observations, a second-order spin–orbit coupled magnetotransport model considering the distinction of the spin chirality in Rashba bands has been developed. The combination of the ARPES measurements and theoretical calculations strongly suggests that the nonreciprocal response originates from the bulk rather than surface Rashba states, and that the unconventional temperature dependence of γ(T) is related to the Fermi level position and the second-order correction of the distribution function. Our work offers valuable insight into the nonreciprocal response and provides pathways towards realizing the room-temperature two-terminal spintronic devices.

Methods

Sample preparation

α-GeTe films were fabricated on insulating Al2O3 (0001) substrates by MBE with a base pressure of <2 × 10−9 mbar. The epi-ready substrate was annealed at 500 °C for 2 h in vacuum before the epitaxy. The deposition was performed using Ge and Te effusion cells set at TGe = 1140 °C and TTe = 310 °C with the substrate temperature at 200 °C. Then, the samples were annealed at the deposition temperature for 30 min to improve the crystalline quality of samples.

ARPES measurements

The grown samples are transferred into the in situ ARPES chamber with a base pressure lower than 10−10 mbar. We used the He discharge lamp (He-I α, hv = 21.2 eV) as the photon source and then detected photoelectrons using Scienta DA30 analyzer with an energy resolution of 20 meV and angular resolution of 0.5°. ARPES measurements were performed at various temperatures.

Transport measurements

The films were patterned into Hall bar devices with the width of 5 ~30 μm (Hall bar with width of 5 μm is used for the harmonic measurement in the main text) by standard photolithography technique and Ar ion milling, and then Ti(10 nm)/Au(50 nm) electrical contacts were deposited via the electron-beam evaporation. The devices were bonded to the horizontal or vertical rotatable sample holders using Al wires and then installed in the Physical Property Measurement System (PPMS, Quantum Design) to perform the electrical properties measurements. Keithley 6221 current source was used to supply sinusoidal ac current with a frequency of 13 Hz. Meanwhile, the in-phase first (0° phase) and out-of-phase (\(\frac{\pi }{2}\) degree phase) second-harmonic voltage signals were probed using two Stanford Research SR830 lock-in amplifiers.