Three-dimensional topological insulators are a class of Dirac materials, wherein strong spin-orbit coupling leads to two-dimensional surface states. The latter feature spin-momentum locking, i.e., each momentum vector is associated with a spin locked perpendicularly to it in the surface plane. While the principal spin generation capability of topological insulators is well established, comparatively little is known about the interaction of the spins with external stimuli like polarized light. We observe a helical, bias-dependent photoconductance at the lateral edges of topological Bi2Te2Se platelets for perpendicular incidence of light. The same edges exhibit also a finite bias-dependent Kerr angle, indicative of spin accumulation induced by a transversal spin Hall effect in the bulk states of the Bi2Te2Se platelets. A symmetry analysis shows that the helical photoconductance is distinct to common longitudinal photoconductance and photocurrent phenomena, but consistent with optically injected spins being transported in the side facets of the platelets.
Selectively addressing the two-dimensional surface states (SSs) of three-dimensional (3D) topological insulators (TIs)1,2,3,4 in electrical transport experiments is challenging due to the intrinsic doping of TIs, resulting in sizable contribution of the bulk states (BSs) to the conductivity. Nevertheless, electrically induced spin-polarized currents due to spin-momentum locking5 have been demonstrated in lateral spin valve devices with a ferromagnetic spin detector based on a number of bismuth and antimony chalcogenides6,7,8,9. Alternatively, the SSs and their dynamics can be probed via optical excitation of photocurrents, whose decay enables access to the spin-relaxation time of both SSs and BSs in 3D Tis10,11,12,13,14,15,16. Time-resolved ARPES experiments have demonstrated dynamics control of spin-polarized currents in Sb2Te317,18 and Bi2Se311,19, as well as emergent Floquet-Bloch states due to hybridization of the SSs and pulsed circularly polarized light (CPL)20. According to theory21,22, CPL can couple to the electron spin in a material and the helicity of the incident photons determines the spin-polarization of the resultant in-plane photocurrents due to asymmetric excitation of spin-up and spin-down carriers. This circular photogalvanic effect has been experimentally demonstrated in Bi2Se323,24,25, Sb2Te326, and (Bi1−xSb x )2Te327 and can be tuned via electrostatic gating24, Fermi energy tuning27, and proximity interactions28. In addition, a helicity-dependent photovoltaic effect has been reported for normally incident light in vicinity of the metal contacts on a Bi2Se3 nanosheet29.
Importantly, along with the SS-generated in-plane spin polarization, the strong spin-orbit coupling (SOC) of the bulk bands can give rise to out-of-plane spin polarization diffusing perpendicularly to the applied current direction via the intrinsic spin Hall effect30,31,32,33,34. Theory further predicts that a bulk-mediated diffusion of spin density can take place between the top and bottom TI surfaces30. So far, only little experimental data are available on bulk spin currents in 3D TIs. Spin-charge conversion via the inverse spin Hall effect has been demonstrated for a TI/metallic ferromagnet heterostructure35. In general, however, SOC-enhanced scattering suggests strongly reduced spin diffusion lengths in 3D TIs, which makes spin detection and manipulation challenging.
In the present work, we explore the spin texture of Bi2Te2Se (BTS) platelets under electrical current flow using two complementary experimental methods, namely helical photoconductance measurements and magneto-optical Kerr microscopy. Our data is fully consistent with a bulk-spin Hall effect generating a spin accumulation in the side-facets of the BTS platelets, and an optical spin-injection, which can be read-out as a helical photoconductance with a lifetime characteristic of the SSs in the platelets’ side-facets.
Helicity dependent photoconductance spectroscopy
We contact individual BTS platelets on a transparent sapphire substrate by two Ti/Au contacts, and focus a circularly polarized laser with a photon energy of 1.54 eV normally incident onto the platelets (Fig. 1a and Methods). We apply a bias voltage Vsd between the contacts, such that a local electron current density j flows in the sample (black arrow in Fig. 1a). Figure 1b presents an optical microscope image of an exemplary device, comprising a BTS platelet with a width of ~9 µm and a height of 90 nm, while the Au-contacts have a distance of 10 µm. We define three positions, specifically the left edge (blue circle), the center (gray circle), and the right edge (red circle). We record the photoconductance signal upon scanning the laser with a spot size of ~1.5 µm across the platelet (Fig. 1c, d), while the light polarization is modulated at a frequency much slower than any carrier-carrier or carrier-phonon interaction rates (see Methods section). The corresponding photoconductance maps acquired under an applied bias voltage Vsd of + 1.2 V (Figs. 1c) and −1.2 V (Fig. 1d) display a helicity dependent photoconductance with opposite sign at both edges. In particular, these signals reflect the difference ΔGhelical = Ghelical(σ+)–Ghelical(σ−) of the photoconductance Ghelical, where σ+ (σ−) corresponds to right (left) circular polarization of the incoming light. The absence of a photoconductance signal away from the edges is consistent with the in-plane spin polarization associated to the SSs at the top/bottom surface of the platelet and the normal incidence of the circularly polarized light18. In order to gain further insight into the origin of the edge signals, we use a quarter wave plate to resolve the sign change of Ghelical as a function of helicity. Figure 1e–g show the corresponding photoconductance Gtotal, which equals the conductance under illumination and the dark conductance subtracted via a lock-in detection (cf. Methods). The obtained helicity-dependent photoconductance difference ΔGhelical, as well as the polarization-independent photoconductance Gphoto are highlighted in Fig. 1e to g. We note that the main oscillation in Gtotal follows the linear polarization of the excitation, and it stems most likely from an anisotropy of the absorption at a finite bias under a linearly polarized excitation36,37,38 (cf. Supplementary Fig. 1 and Supplementary Fig. 2). Importantly, this linear contribution of the photoconductance does not show any significant features at the platelets’ edges (cf. Supplementary Fig. 3). In the following, we interpret Ghelical to occur in the topological side surfaces of the BTS platelets as a consequence of a spin-current caused by the bulk spin-Hall effect30,31,32,33,34. In this scenario, the spin accumulation induced by the bias-driven current density j (black arrow in Fig. 1a, c, d) is characterized by an out-of-plane spin polarization pointing in opposite directions at the left and right edge of the BTS platelet (blue and red arrows).
Helicity-dependent vs. longitudinal photoconductance
Figure 2a reveals that ΔGhelical depends linearly on the laser power Plaser (up to 12 mW), without reaching saturation. By contrast, the polarization-independent photoconductance Gphoto displays a polarity change vs. laser power, as discussed in detail in  (Fig. 2b). Correspondingly, we attribute the polarity change to a saturation of the lifetime-limited photoconductance in the bulk states and the one in the SSs at the top and bottom surface for Plaser ≥ 5 mW, while a bolometric photoconductance with a negative sign dominates the high power regime. We note that a bolometric photoconductance is driven by a heated phonon bath of the BTS platelets12. Figure 2a highlights that ΔGhelical captures an effect that is clearly distinguished from the conventional longitudinal photoconductance effects in the bulk and surface states of BTS. This difference becomes particularly evident at a laser power of ~6 mW, where the polarization-independent Gphoto is zero, while ΔGhelical can be fully controlled with the laser polarization. The latter observation indicates that ΔGhelical is not a modulation of Gphoto. In other words, for an absorption effect, ΔGhelical would follow Gphoto in amplitude and direction. To a first approximation, ΔGhelical is decoupled from the helicity independent longitudinal photoconductance, which justifies our approach of subtracting the helicity independent conductance contributions as an offset and only evaluating the helicity dependent photoconductance (cf. Fig. 3 and Supplementary Fig. 1).
Symmetry considerations for the helicity dependent photoconductance
The schematic sketches of the excitation configuration of our photoconductance experiment in Fig. 3a, b define the electron and photon wave vectors kelectron and kphoton, as well as the spin polarization S at the left and right edges of the BTS platelet. As apparent from Fig. 3c to h, a finite Ghelical is observed only at a finite bias voltage, thereby excluding Ghelical as a photocurrent effect which would have a finite magnitude at zero bias. We note that for Vsd = 0 (Figs. 3d and 3g), the originally detected signal Ihelical ~ 0 nA is plotted instead of Ghelical, as an experimental conductance is not defined at zero bias. As another relevant observation, Ghelical flips by π when either the bias Vsd is reversed (cf. Fig. 3c vs. 3e and Fig. 3f vs. 3 h), or when the laser spot position is exchanged between the left and right platelet edge.
Table 1 summarizes the experimentally observed symmetry characteristics of Ghelical as concluded from Figs. 1–3, and contrasts them with those of the polarization-independent Gphoto and of helical photocurrents in materials with a broken symmetry39,40. The latter type of current is denoted as Iedge in the table, in order to associate it with the circular photogalvanic effect which is well documented for topological insulators21,22,23,24,25,40. From the observed bias dependence, any photocurrent effect can be excluded as origin of Ghelical. However, it should be emphasized that such currents indeed emerge at the side-facets of the BTS platelets, although their amplitude is very small (cf. Supplementary Fig. 4). The small amplitude is explainable by the fact that the optical cross section of the side facets is about 100 times smaller compared to that of the bulk volume in the BTS platelets. It is furthermore noteworthy that the helical photoconductance Ghelical does not depend on the direction of the photon wavevector kphoton (cf. Fig. 3 vs. Supplementary Fig. 5 and Supplementary Fig. 6). Moreover, from the polarity change of Ghelical with Vsd, one can exclude a longitudinal photoconductance response based upon the following argument. In case of a longitudinal response, the sign of Ghelical would reflect the preferred current direction in x-direction upon laser illumination. From a symmetry perspective, a current reversal is equivalent to a simultaneous operation going from left edge to right edge and a rotation of the sample by a spatial angle of π. The latter combined operations have to be an even operation due to rotational symmetry, while a bias reversal of Ghelical is odd (cf. Table 1), which contradicts the experimental findings. Nonetheless, there remains a process which is fully consistent with the observed symmetries, specifically a transverse photoconductance. In fact, the latter can effectively modulate the conductivity along the edges of the BTS platelets, and thus supports the assumption of a bulk spin current in 3D TIs, which has been analytically predicted based upon topological arguments30. Recently, bulk spin currents have been identified as a possible spin generation mechanism in 3D topological insulators via the spin Hall effect30,31,32,33,34. Indeed, this mechanism would yield an accumulated spin polarization parallel to the SS-based spin polarization in the side facets of BTS platelets (cf. red and blue arrows in Fig. 1a), as recently verified and discussed30,31,32,33,34,35. Furthermore, it should result in an opposite spin accumulation at the opposite edges of the BTS platelets, and also reverse sign upon reversing the longitudinal charge current direction.
In order to verify the presence of vertically aligned spins accumulated at the edges of the BTS platelets, we investigate the device by magneto-optical Kerr-microscopy. The detected Kerr angles θk (Figs. 4a–4c) are bias-dependent and their sign is opposite at the opposite edges of the platelet. Likewise, the sign of θk at the edges switches with the sign of the applied bias (Figs. 4a and 4c), whereas θk vanishes at the center of the platelet (Fig. 4b). In close correspondence, also Ghelical follows such a bias and position dependence (Figs. 4d to 4f).
The above outlined mechanism of helicity dependent photoconductance in BTS can be rationalized by a microscopic model as follows. The spin relaxation of photogenerated charge and spin carriers in 3D TIs, including BTS, occurs on ultrafast timescales on the order of 100 fs11. This fast relaxation suggests that the underlying spin dynamics of Ghelical are governed by spin diffusion rather than a spin precession process31. The spin diffusion length in Bi2Se3 was experimentally determined to be below 10 nm at room temperature41. This length is significantly smaller than both, the diffusion length of hot carriers that ranges between 200 and 300 nm in bismuth-chalcogenides42, and the laser spot size of ~1.5 µm in our experiment. Moreover, we observe that Ghelical is located at the edges of the BTS platelets (Fig. 1d). Interestingly, we can observe the edge-localized Ghelical also in a BTS platelet with a spatial width as small as dplatelet ~300 nm (cf. Supplementary Fig. 7). The latter observation is consistent with a dominating spin diffusion length smaller than ½ ˑdplatelet ~ 150 nm at the edges. It has been reported that the inverse spin Hall effect in the bulk states of n-doped Bi2Se3 is comparable to or even dominating over the surface Edelstein effects35,41. Hence, a bulk spin Hall effect should be favorable over an out-of-plan spin component due to warping effects in the top and bottom surface of the BTS platelets21. Moreover, the side facets are expected to exhibit a spin-momentum locking43 even in the presence of disorder. Under sufficiently high surface disorder, the spin relaxation time has been predicted to be increased similar as the D’yakonov–Perel mechanism in a motional narrowing regime30. Analogously, the spin generation efficiency and surface conductivity are suggested to be strongly enhanced at the disordered facets of the BTS platelets30, as previously demonstrated for surfaces of BiSbTeSe244. Along these lines, we interpret Ghelical as a measure of optically excited spins which are driven by the spin Hall mechanism to (or away from) the edges (blue and red arrows in Fig. 1a), where they experience an increased (or decreased) conductivity. This scenario is able to account for all our experimental findings. In particular, it explains not only the polarization dependence in Figs. 1e to 1g, but also all other experimental observations summarized in Table 1. This interpretation suggests that Ghelical is a read-out of a bulk spin current by scattering optically injected spins into the surface states of the side-facets in the BTS platetes30. Regarding the carriers involved in the optical excitation, it is important that we do not claim that the spin-polarization is generated in the topological surface states. Instead, we interpret the spin-polarization to predominantly originate from topologically trivial bands. In this context, it is relevant that, in particular for high doping levels, also the topologically trivial conduction band in BTS exhibits a strongly anisotropic spin-orbit splitting close to the surface45. The same holds for the valence bands which are energetically buried 0.8-1.6 eV below the Fermi-level46. Importantly, we determine the decay time of Ghelical to be τdecay = (463 ± 13) ps (cf. Supplementary Fig. 8). This value, while exceeding the spin relaxation time by far, agrees very well with the surface lifetime of the BTS platelets12,47; thereby strongly supporting the above mechanism. In other words, after a pulsed laser excitation, Ghelical prevails as long as τdecay within the surface states of the side facets.
Overall, the possibility to optically detect the spin Hall effect-driven spins at structurally disordered 3D TI surfaces relaxes the technical demands on device fabrications, thus underscoring the theoretical prediction that surface disorder in 3D TIs might even be beneficial for spintronic applications30. Furthermore, the demonstrated read-out principle might prove useful also for probing the spatial accumulation of spins in related materials such as Weyl semimetals.
Bi2Te2Se platelet growth and charge carrier density
BTS platelets are grown by a catalyst-free vapor-solid method on Si substrates covered by a 300 nm thick SiO2 layer. Bi2Se3 and Bi2Te3 crystal sources (99.999% purity) are heated up to ~580 °C in a tube furnace. Ultrapure argon gas transports the evaporated material to the growth substrates, which are heated to 450°−480 °C during a growth time of 30 min. The pressure in the furnace is maintained at 75–85 mbar at Argon flow rate of 150 sccm. Thus obtained platelets have a length in the range of 5-60 µm, a lateral width of 0.05-10 µm, and a thickness of 15–200 nm. The platelets are mechanically transferred onto Al2O3 substrates and lithographically contacted by metal strips made of thermally evaporated Ti/Au (10 nm/250 nm). Four-terminal Hall-measurements on single BTS platelets with a width of a few hundreds of nm revealed n-doping character, with an electron concentration of 1019 cm−3 at room temperature.
Time-integrated photoconductance spectroscopy
For the excitation of the BTS platelets, we use a Ti-sapphire laser that emits light at laser pulses with 150 fs pulse duration and a repetition rate of 76 MHz. In all cases, the photon energy is set to be 1.54 eV. The position of the laser spot with size ~1.5 µm is set with a spatial resolution of ~100 nm. The helical photoconductance is measured with a standard lock-in measurement technique, where the laser is modulated by an optical chopper at a frequency of fchop = 2.7 kHz or a piezoelastic modulator (PEM) at a frequency of 50 kHz. The PEM is set to switch the polarization of the exciting laser between σ− and σ+ polarized light. Alternatively, we utilize a quarter wave plate to control the circular polarization of the laser. The pulsed excitation scheme allows us to compare our time-integrated photoconductance results with our lifetime measurements from autocorrelation spectroscopy (cf. Supplementary Fig. 8) and with earlier results (see ref. ). We do consider our time-integrated measurements as steady state results and we can reproduce them with a CW excitation (cf. Supplementary Fig. 9). We performed the helicity resolved photoconductance experiments on three different devices. In all cases, we observed the described signals of opposite sign at the edges. All presented experiments are performed at room temperature and in a vacuum chamber at ~5 × 10−6 mbar.
Autocorrelation photoconductance spectroscopy
For characterizing the decay dynamics of Ghelical, we split the pulsed laser beam into a pump and a probe pulse with comparable intensity, and focus the pump- (probe-) from the front (back) onto the BTS platelets (cf. Supplementary Fig. 8). The probe-beam, which is modulated by an optical chopper at a frequency of ~1930 Hz, hits the sample at a time delay Δt. The time-resolved autocorrelation signal is then detected with a lock-in amplifier on the sum-fequency of the pump- and the probe-pulse as a function of the time delay Δt. The probe-pulse is delayed via a mechanical delay stage.
Magneto-optical Kerr microscopy
For the Kerr-effect spectroscopy we utilize the same measurement setup as for the photoconductance spectroscopy. The laser is polarized purely linearly. The polarization of the reflected light is rotated by 45° via a half-waveplate. Afterwards, a Wollaston prism splits the reflected light into two cross-polarized beams with an angle of 20° which are detected by two balanced photodetectors. The difference-signal and sum-signal of the detectors are detected by two lock-in amplifiers at a chopper-frequency of 2.7 kHz. To calibrate the reflected signal, the laser-spot is positioned onto a normally reflecting surface (e.g., gold) and the half-waveplate is adjusted, such that the difference signal of the detectors is perfectly zero. Any rotation of the reflected light’s polarization shifts the balance between the detectors, which is then detected in the difference- but not in the sum-signal. Hence the sum-signal is used to calibrate the difference-signal in order to get rid of laser-intensity based noise and fluctuations.
All relevant data that supports our experimental findings is available from the corresponding author upon reasonable request.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
We acknowledge S. Tarasenko, H. Hübl, and M. Münzenberg for very helpful discussions, and the DFG (Projects HO 3324/8-2, SFB 1277-A04, and the excellence cluster "Nanosystems Initiative Munich" (NIM)), as well as the ERC-grant NanoREAL for financial support.
Electronic supplementary material
About this article
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.