Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Enhanced selectivity in mixed matrix membranes for CO2 capture through efficient dispersion of amine-functionalized MOF nanoparticles

Nature Energy volume 2, Article number: 17086 (2017) Cite this article

Subjects

Abstract

Mixed matrix membranes (MMMs) for gas separation applications have enhanced selectivity when compared with the pure polymer matrix, but are commonly reported with low intrinsic permeability, which has major cost implications for implementation of membrane technologies in large-scale carbon capture projects. High-permeability polymers rarely generate sufficient selectivity for energy-efficient CO2 capture. Here we report substantial selectivity enhancements within high-permeability polymers as a result of the efficient dispersion of amine-functionalized, nanosized metal–organic framework (MOF) additives. The enhancement effects under optimal mixing conditions occur with minimal loss in overall permeability. Nanosizing of the MOF enhances its dispersion within the polymer matrix to minimize non-selective microvoid formation around the particles. Amination of such MOFs increases their interaction with thepolymer matrix, resulting in a measured rigidification and enhanced selectivity of the overall composite. The optimal MOF MMM performance was verified in three different polymer systems, and also over pressure and temperature ranges suitable for carbon capture.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Fabrication of MMMs in this study.
Figure 2: MOF and MMM physical characterization.
Figure 3: Computational studies of adhesions between PIM-1 and UiO-66 particles.
Figure 4: Gas transport properties.
Figure 5: Mechanical studies of PIM-1 MMMs and demonstration of similar performance in other polymer MMMs.

Similar content being viewed by others

References

  1. Reiner, D. M. Learning through a portfolio of carbon capture and storage demonstration projects. Nat. Energy 1, 15011 (2016).

    Google Scholar 

  2. Merkel, T. C., Lin, H., Wei, X. & Baker, R. Power plant post-combustion carbon dioxide capture: an opportunity for membranes. J. Membr. Sci. 359, 126–139 (2010).

    Google Scholar 

  3. Lai, Z. et al. Microstructural optimization of a zeolite membrane for organic vapor separation. Science 300, 456–460 (2003).

    Google Scholar 

  4. Kitagawa, S., Kitaura, R. & Noro, S. i. Functional porous coordination polymers. Angew. Chem. Int. Edn 43, 2334–2375 (2004).

    Google Scholar 

  5. Song, Q. et al. Porous organic cage thin films and molecular-sieving membranes. Adv. Mater. 28, 2629–2637 (2016).

    Google Scholar 

  6. Freeman, B. D. Basis of permeability/selectivity tradeoff relations in polymeric gas separation membranes. Macromolecules 32, 375–380 (1999).

    Google Scholar 

  7. Budd, P. M. et al. Polymers of intrinsic microporosity (PIMs): robust, solution-processable, organic nanoporous materials. Chem. Commun. 2, 230–231 (2004).

    Google Scholar 

  8. Ghanem, B. S., McKeown, N. B., Budd, P. M., Selbie, J. D. & Fritsch, D. High-performance membranes from polyimides with intrinsic microporosity. Adv. Mater. 20, 2766–2771 (2008).

    Google Scholar 

  9. Kim, S. & Lee, Y. M. Rigid and microporous polymers for gas separation membranes. Prog. Polym. Sci. 43, 1–32 (2015).

    Google Scholar 

  10. Song, Q. et al. Controlled thermal oxidative crosslinking of polymers of intrinsic microporosity towards tunable molecular sieve membranes. Nat. Commun. 5, 4813 (2014).

    Google Scholar 

  11. Ghalei, B. et al. Surface functionalization of high free-volume polymers as a route to efficient hydrogen separation membranes. J. Mater. Chem. A 5, 4686–4694 (2017).

    Google Scholar 

  12. Park, H. B., Han, S. H., Jung, C. H., Lee, Y. M. & Hill, A. J. Thermally rearranged (TR) polymer membranes for CO2 separation. J. Membr. Sci. 359, 11–24 (2010).

    Google Scholar 

  13. Song, Q. et al. Photo-oxidative enhancement of polymeric molecular sieve membranes. Nat. Commun. 4, 1918 (2013).

    Google Scholar 

  14. Du, N., Dal-Cin, M. M., Robertson, G. P. & Guiver, M. D. Decarboxylation-induced cross-linking of Polymers of Intrinsic Microporosity (Pims) for membrane gas separation. Macromolecules 45, 5134–5139 (2012).

    Google Scholar 

  15. Jones, C. W. & Koros, W. J. Carbon molecular sieve gas separation membranes-I. Preparation and characterization based on polyimide precursors. Carbon 32, 1419–1425 (1994).

    Google Scholar 

  16. Chung, T.-S., Jiang, L. Y., Li, Y. & Kulprathipanja, S. Mixed matrix membranes (MMMs) comprising organic polymers with dispersed inorganic fillers for gas separation. Prog. Polym. Sci. 32, 483–507 (2007).

    Google Scholar 

  17. Rezakazemi, M., Amooghin, A. E., Montazer-Rahmati, M. M., Ismail, A. F. & Matsuura, T. State-of-the-art membrane based CO2 separation using mixed matrix membranes (MMMs): an overview on current status and future directions. Prog. Polym. Sci. 39, 817–861 (2014).

    Google Scholar 

  18. Seoane, B. et al. Metal–organic framework based mixed matrix membranes: a solution for highly efficient CO2 capture? Chem. Soc. Rev. 44, 2421–2454 (2015).

    Google Scholar 

  19. Rangnekar, N., Mittal, N., Elyassi, B., Caro, J. & Tsapatsis, M. Zeolite membranes—a review and comparison with MOFs. Chem. Soc. Rev. 44, 7128–7154 (2015).

    Google Scholar 

  20. Cavka, J. H. et al. A new zirconium inorganic building brick forming metal organic frameworks with exceptional stability. J. Am. Chem. Soc. 130, 13850–13851 (2008).

    Google Scholar 

  21. Tsuruoka, T. et al. Nanoporous nanorods fabricated by coordination modulation and oriented attachment growth. Angew. Chem. Int. Edn 48, 4739–4743 (2009).

    Google Scholar 

  22. Budd, P. M. et al. Solution-processed, organophilic membrane derived from a polymer of intrinsic microporosity. Adv. Mater. 16, 456–459 (2004).

    Google Scholar 

  23. Schaate, A. et al. Modulated synthesis of Zr-based metal–organic frameworks: from nano to single crystals. Chem. A Eur. J. 17, 6643–6651 (2011).

    Google Scholar 

  24. Kandiah, M. et al. Synthesis and stability of tagged UiO-66 Zr-MOFs. Chem. Mater. 22, 6632–6640 (2010).

    Google Scholar 

  25. Rappé, A. K., Casewit, C. J., Colwell, K., Goddard, W. III & Skiff, W. UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations. J. Am. Chem. Soc. 114, 10024–10035 (1992).

    Google Scholar 

  26. Rappe, A. K. & Goddard, W. A. III Charge equilibration for molecular dynamics simulations. J. Phys. Chem. 95, 3358–3363 (1991).

    Google Scholar 

  27. Øien, S. et al. Detailed structure analysis of atomic positions and defects in zirconium metal–organic frameworks. Crystal Growth Design 14, 5370–5372 (2014).

    Google Scholar 

  28. Semino, R., Ramsahye, N. A., Ghoufi, A. & Maurin, G. Microscopic model of the MOF/polymer interface: a first step towards understanding the compatibility in Mixed Matrix Membranes. ACS Appl. Mater. Interfaces 8, 809–819 (2016).

    Google Scholar 

  29. Mahajan, R. & Koros, W. J. Mixed matrix membrane materials with glassy polymers. Part 1. Polymer Eng. Sci. 42, 1420–1431 (2002).

    Google Scholar 

  30. Li, Y., Chung, T.-S., Cao, C. & Kulprathipanja, S. The effects of polymer chain rigidification, zeolite pore size and pore blockage on polyethersulfone (PES)-zeolite A mixed matrix membranes. J. Membr. Sci. 260, 45–55 (2005).

    Google Scholar 

  31. Vu, D. Q., Koros, W. J. & Miller, S. J. Mixed matrix membranes using carbon molecular sieves: II. Modeling permeation behavior. J. Membr. Sci. 211, 335–348 (2003).

    Google Scholar 

  32. Ren, H., Jin, J., Hu, J. & Liu, H. Affinity between metal–organic frameworks and polyimides in asymmetric mixed matrix membranes for gas separations. Ind. Eng. Chem. Res. 51, 10156–10164 (2012).

    Google Scholar 

  33. Bushell, A. F. et al. Gas permeation parameters of mixed matrix membranes based on the polymer of intrinsic microporosity PIM-1 and the zeolitic imidazolate framework ZIF-8. J. Membr. Sci. 427, 48–62 (2013).

    Google Scholar 

  34. Goh, P. S., Ismail, A. F., Sanip, S. M., Ng, B. C. & Aziz, M. Recent advances of inorganic fillers in mixed matrix membrane for gas separation. Sep. Purif. Technol. 81, 243–264 (2011).

    Google Scholar 

  35. Nik, O. G., Chen, X. Y. & Kaliaguine, S. Functionalized metal organic framework-polyimide mixed matrix membranes for CO2/CH4 separation. J. Membr. Sci. 413, 48–61 (2012).

    Google Scholar 

  36. Anjum, M. W. et al. Modulated UiO-66-based mixed-matrix membranes for CO2 separation. ACS Appl. Mater. Interfaces 7, 25193–25201 (2015).

    Google Scholar 

  37. Rodenas, T. et al. Metal–organic framework nanosheets in polymer composite materials for gas separation. Nat. Mater. 14, 48–55 (2015).

    Google Scholar 

  38. Lau, C. H. et al. Ending aging in super glassy polymer membranes. Angew. Chem. Int. Edn 53, 5322–5326 (2014).

    Google Scholar 

  39. Lau, C. H. et al. Ending aging in super glassy polymer membranes. Angew. Chem. Int. Edn 126, 5426–5430 (2014).

    Google Scholar 

  40. Harms, S. et al. Aging and free volume in a polymer of intrinsic microporosity (PIM-1). J. Adhesion 88, 608–619 (2012).

    Google Scholar 

  41. Tiwari, R. R., Smith, Z. P., Lin, H., Freeman, B. & Paul, D. Gas permeation in thin films of ‘high free-volume’ glassy perfluoropolymers: Part I. Physical aging. Polymer 55, 5788–5800 (2014).

    Google Scholar 

  42. Isfahani, A. P. et al. Plasticization resistant crosslinked polyurethane gas separation membranes. J. Mater. Chem. A 4, 17431–17439 (2016).

    Google Scholar 

  43. Brunauer, S., Emmett, P. H. & Teller, E. Adsorption of gases in multimolecular layers. J. Am. Chem. Soc. 60, 309–319 (1938).

    Google Scholar 

  44. Khdhayyer, M. R. et al. Mixed matrix membranes based on UiO-66 MOFs in the polymer of intrinsic microporosity PIM-1. Sep. Purif. Technol. 173, 304–313 (2017).

    Google Scholar 

  45. Smith, S. J., Ladewig, B. P., Hill, A. J., Lau, C. H. & Hill, M. R. Post-synthetic Ti exchanged UiO-66 metal-organic frameworks that deliver exceptional gas permeability in mixed matrix membranes. Sci. Rep. 5, 7823 (2015).

    Google Scholar 

  46. Robeson, L. M. The upper bound revisited. J. Membr. Sci. 320, 390–400 (2008).

    Google Scholar 

Download references

Acknowledgements

H.H. thanks JST-PRESTO (JPMJPR141B) and City University of Hong Kong for financial support. E.S. gratefully acknowledges JST-PRESTO (JPMJPR1417) and the Japanese Ministry of Environment as part of the project ‘Low Carbon Technology Research, Development and Demonstration Program’. iCeMS is supported by the World Premier International Research Initiative (WPI), MEXT, Japan.

Author information

Authors and Affiliations

  1. Institute for Integrated Cell-Material Sciences (iCeMS), Kyoto University, 606-8501 Kyoto, Japan

    Behnam Ghalei, Kento Sakurai, Yosuke Kinoshita, Kazuki Wakimoto, Ali Pournaghshband Isfahani, Shuhei Furukawa, Susumu Kitagawa & Easan Sivaniah

  2. Department of Energy Science and Technology, Kyoto University, 606-8501 Kyoto, Japan

    Kento Sakurai, Yosuke Kinoshita, Kazuki Wakimoto & Hiromu Kusuda

  3. Department of Chemical Engineering, Barrer Centre, Imperial College, London SW7 2AZ, UK

    Qilei Song

  4. Department of Biology and Chemistry, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong, China

    Kazuki Doitomi & Hajime Hirao

  5. Division of Chemistry and Biological Chemistry, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371, Singapore

    Kazuki Doitomi & Hajime Hirao

Authors
  1. Behnam Ghalei
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Kento Sakurai
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Yosuke Kinoshita
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Kazuki Wakimoto
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Ali Pournaghshband Isfahani
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Qilei Song
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Kazuki Doitomi
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Shuhei Furukawa
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Hajime Hirao
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Hiromu Kusuda
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. Susumu Kitagawa
    View author publications

    You can also search for this author in PubMed Google Scholar

  12. Easan Sivaniah
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

B.G. conceived and designed the research. K.S. and Y.K. synthesized and analysed PIM-1 MMMs, K.W. synthesized and analysed PEBAX MMMs, A.P. synthesized and analysed polyurethane MMMs, S.F. and S.K. evaluated MOF-related data, Q.S. evaluated mixed membrane data, K.D. and H.H. performed simulations and H.K. S.K. and E.S. supervised researchers in the project. All authors discussed the results and commented on the manuscript at all stages.

Corresponding author

Correspondence to Easan Sivaniah.

Ethics declarations

Competing interests

The results of this publication have been submitted for a patent filing application.

Supplementary information

Supplementary Information

Supplementary Figures 1–21, Supplementary Tables 1–10, Supplementary Notes 1–3 and Supplementary References. (PDF 4176 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ghalei, B., Sakurai, K., Kinoshita, Y. et al. Enhanced selectivity in mixed matrix membranes for CO2 capture through efficient dispersion of amine-functionalized MOF nanoparticles. Nat Energy 2, 17086 (2017). https://doi.org/10.1038/nenergy.2017.86

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1038/nenergy.2017.86

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing