Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Metal segregation in hierarchically structured cathode materials for high-energy lithium batteries

Nature Energy volume 1, Article number: 15004 (2016) Cite this article

Subjects

Abstract

In technologically important LiNi1−x−yMnxCoyO2 cathode materials, surface reconstruction from a layered to a rock-salt structure is commonly observed under a variety of operating conditions, particularly in Ni-rich compositions. This phenomenon contributes to poor high-voltage cycling performance, impeding attempts to improve the energy density by widening the potential window at which these electrodes operate. Here, using advanced nano-tomography and transmission electron microscopy techniques, we show that hierarchically structured LiNi0.4Mn0.4Co0.2O2 spherical particles, made by a simple spray pyrolysis method, exhibit local elemental segregation such that surfaces are Ni-poor and Mn-rich. The tailored surfaces result in superior resistance to surface reconstruction compared with those of conventional LiNi0.4Mn0.4Co0.2O2, as shown by soft X-ray absorption spectroscopy experiments. The improved high-voltage cycling behaviour exhibited by cells containing these cathodes demonstrates the importance of controlling LiNi1−x−yMnxCoyO2 surface chemistry for successful development of high-energy lithium ion batteries.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Elemental mapping and association calculation using transmission X-ray tomography.
Figure 2: 3D elemental association maps generated using transmission X-ray tomography.
Figure 3: Characterization of the NMC-442 materials synthesized by spray pyrolysis.
Figure 4: Electronic and compositional characterization using EELS.
Figure 5: Battery cycling performance of lithium half-cells containing the NMC-442 materials.
Figure 6: Surface chemistry of NMC materials before and after electrochemical cycling.
Figure 7: 3D elemental association mapping and elemental distribution of co-precipitated NMC particles.

Similar content being viewed by others

References

  1. Whittingham, M. S. Lithium batteries and cathode materials. Chem. Rev. 104, 4271–4302 (2004).

    Article  Google Scholar 

  2. Whittingham, M. S. Ultimate limits to intercalation reactions for lithium batteries. Chem. Rev. 114, 11414–11443 (2014).

    Article  Google Scholar 

  3. Doeff, M. M. Batteries: Overview of Battery Cathodes 709–739 (Springer Encyclopedia of Sustainability Science and Technology Springer Science + Business Media, LLC, 2012).

    Google Scholar 

  4. Xu, X., Lee, S., Jeong, S., Kim, Y. & Cho, J. Recent progress on nanostructured 4V cathode materials for Li-ion batteries for mobile electronics. Mater. Today 16, 487–495 (December, 2013).

    Article  Google Scholar 

  5. Hwang, B. J., Tsai, Y. W., Carlier, D. & Ceder, G. A combined computational/experimental study on LiNi1∕3Co1∕3Mn1∕3O2 . Chem. Mater. 15, 3676–3682 (2003).

    Article  Google Scholar 

  6. Islam, M. S. & Fisher, C. A. J. Lithium and sodium battery cathode materials: Computational insights into voltage, diffusion and nanostructural properties. Chem. Soc. Rev. 43, 185–204 (2014).

    Article  Google Scholar 

  7. Jung, S.-K. et al. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries. Adv. Energy Mater. 4, 1300787–1300794 (2013).

    Article  Google Scholar 

  8. Xu, B., Fell, C. R., Chi, M. & Meng, Y. S. Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: A joint experimental and theoretical study. Energy Environ. Sci. 4, 2223–2233 (2011).

    Article  Google Scholar 

  9. Hwang, S. et al. Investigation of changes in the surface structure of LixNi0.8Co0.15Al0.05O2 cathode materials induced by the initial charge. Chem. Mater. 26, 1084–1092 (2014).

    Article  Google Scholar 

  10. Lin, F. et al. Influence of synthesis conditions on the surface passivation and electrochemical behavior of layered cathode materials. J. Mater. Chem. A 2, 19833–19840 (2014).

    Article  Google Scholar 

  11. Lin, F. et al. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries. Nature Commun. 5, 3529 (2014).

    Article  Google Scholar 

  12. Lin, F. et al. Profiling the nanoscale gradient in stoichiometric layered cathode particles for lithium-ion batteries. Energy Environ. Sci. 7, 3077–3085 (2014).

    Article  Google Scholar 

  13. Yang, F. et al. Nanoscale morphological and chemical changes of high voltage lithium-manganese rich NMC composite cathodes with cycling. Nano Lett. 14, 4334–4341 (2014).

    Article  Google Scholar 

  14. Abraham, D. P. et al. Microscopy and spectroscopy of lithium nickel oxide-based particles used in high power lithium-ion cells. J. Electrochem. Soc. 150, A1450–A1456 (2003).

    Article  Google Scholar 

  15. Zheng, J. et al. Corrosion/fragmentation of layered composite cathode and related capacity/voltage fading during cycling process. Nano Lett. 13, 3824–3830 (2013).

    Article  Google Scholar 

  16. Lin, M. et al. Insight into the atomic structure of high-voltage spinel LiNi0.5Mn1.5O4 cathode material in the first cycle. Chem. Mater. 27, 292–303 (2015).

    Article  Google Scholar 

  17. Qiao, R. et al. Direct evidence of gradient Mn(II) evolution at charged states in LiNi0.5Mn1.5O4 electrodes with capacity fading. J. Power Sources 273, 1120–1126 (2015).

    Article  Google Scholar 

  18. Jarry, A. et al. The formation mechanism of fluorescent metal complexes at the Li(x)Ni(0.5)Mn(1.5)O(4−δ)/carbonate ester electrolyte interface. J. Am. Chem. Soc. 137, 3533–3539 (2015).

    Article  Google Scholar 

  19. Markus, I. M., Lin, F., Kam, K. C., Asta, M. & Doeff, M. M. Computational and experimental investigation of Ti substitution in Li1 (NixMnxCo1−2x−yTiy)O2 for lithium ion batteries. J. Phys. Chem. Lett. 5, 3649–3655 (2014).

    Article  Google Scholar 

  20. Kam, K. C. & Doeff, M. M. Aliovalent titanium substitution in layered mixed Li Ni–Mn–Co oxides for lithium battery applications. J. Mater. Chem. 21, 9991–9993 (2011).

    Article  Google Scholar 

  21. Kam, K. C., Mehta, A., Heron, J. T. & Doeff, M. M. Electrochemical and physical properties of Ti-substituted layered nickel manganese cobalt oxide (NMC) cathode materials. J. Electrochem. Soc. 159, A1383–A1392 (2012).

    Article  Google Scholar 

  22. Maier, J. Nanoionics: Ion transport and electrochemical storage in confined systems. Nature Mater. 4, 805–815 (2005).

    Article  Google Scholar 

  23. Nie, A. et al. Twin boundary-assisted lithium ion transport. Nano Lett. 15, 610–615 (2015).

    Article  Google Scholar 

  24. Cheng, L. et al. The origin of high electrolyte–electrode interfacial resistances in lithium cells containing garnet type solid electrolytes. Phys. Chem. Chem. Phys. 16, 18294–18300 (2014).

    Article  Google Scholar 

  25. Cheng, L. et al. Effect of surface microstructure on electrochemical performance of garnet solid electrolytes. ACS Appl. Mater. Interfaces 7, 2073–2081 (2015).

    Article  Google Scholar 

  26. Belharouak, I., Lu, W., Vissers, D. & Amine, K. Safety characteristics of Li(Ni0.8Co0.15Al0.05)O2 and Li(Ni1∕3Co1∕3Mn1∕3)O2 . Electrochem. Commun. 8, 329–335 (2006).

    Article  Google Scholar 

  27. Sun, Y.-K. et al. High-energy cathode material for long-life and safe lithium batteries. Nature Mater. 8, 320–324 (2009).

    Article  Google Scholar 

  28. Sun, Y.-K. et al. Nanostructured high-energy cathode materials for advanced lithium batteries. Nature Mater. 11, 942–947 (2012).

    Article  Google Scholar 

  29. Cho, Y., Oh, P. & Cho, J. A new type of protective surface layer for high-capacity Ni-based cathode materials: Nanoscaled surface pillaring layer. Nano Lett. 13, 1145–1152 (2013).

    Article  Google Scholar 

  30. Jung, D. S., Ko, Y. N., Kang, Y. C. & Park, S. B. Recent progress in electrode materials produced by spray pyrolysis for next-generation lithium ion batteries. Adv. Powder Technol. 25, 18–31 (2014).

    Article  Google Scholar 

  31. Zhang, X. & Axelbaum, R. L. Spray pyrolysis synthesis of mesoporous lithium–nickel–manganese-oxides for high energy Li-ion batteries. J. Electrochem. Soc. 159, A834–A842 (2012).

    Article  Google Scholar 

  32. Jung, D. S. et al. Hierarchical porous carbon by ultrasonic spray pyrolysis yields stable cycling in lithium–sulfur battery. Nano Lett. 14, 4418–4425 (2014).

    Article  Google Scholar 

  33. Bang, J. H., Didenko, Y. T., Helmich, R. J. & Suslick, K. S. Nanostructured materials through ultrasonic spray pyrolysis. Mater. Matters 7, 19–25 (2012).

    Google Scholar 

  34. Liu, J., Conry, T. E., Song, X., Doeff, M. M. & Richardson, T. J. Nanoporous spherical LiFePO4 for high performance cathodes. Energy Environ. Sci. 4, 885–888 (2011).

    Article  Google Scholar 

  35. Liu, J. et al. Spherical nanoporous LiCoPO4/C composites as high performance cathode materials for rechargeable lithium-ion batteries. J. Mater. Chem. 21, 9984–9987 (2011).

    Article  Google Scholar 

  36. Kao, T. L. et al. Nanoscale elemental sensitivity study of Nd2Fe14B using absorption correlation tomography. Microsc. Res. Tech. 76, 1112–1117 (2013).

    Article  Google Scholar 

  37. Meirer, F. et al. Three-dimensional imaging of chemical phase transformations at the nanoscale with full-field transmission X-ray microscopy. J. Synchrotron Radiat. 18, 773–781 (2011).

    Article  Google Scholar 

  38. Wang, J., Chen-Wiegart, Y. K. & Wang, J. In operando tracking phase transformation evolution of lithium iron phosphate with hard X-ray microscopy. Nature Commun. 5, 4570 (2014).

    Article  Google Scholar 

  39. Gu, M. et al. Conflicting roles of nickel in controlling cathode performance in lithium ion batteries. Nano Lett. 12, 5186–5191 (2012).

    Article  Google Scholar 

  40. Zhou, L., Zhao, D. & Lou, X. LiNi(0.5)Mn(1.5)O4 hollow structures as high-performance cathodes for lithium-ion batteries. Angew. Chem. Int. Ed. 51, 239–241 (2012).

    Article  Google Scholar 

  41. Petersburg, C. F., Li, Z., Chernova, N. A., Whittingham, M. S. & Alamgir, F. M. Oxygen and transition metal involvement in the charge compensation mechanism of LiNi1∕3Mn1∕3Co1∕3O2 cathodes. J. Mater. Chem. 22, 19993–20000 (2012).

    Article  Google Scholar 

  42. Wilcox, J., Patoux, S. & Doeff, M. Structure and electrochemistry of LiNi1∕3Co1∕3−yMyMn1∕3O2 (M = Ti, Al, Fe) positive electrode materials. J. Electrochem. Soc. 156, A192–A198 (2009).

    Article  Google Scholar 

  43. Kang, S.-H., Yoon, W.-S., Nam, K.-W., Yang, X.-Q. & Abraham, D. P. Investigating the first-cycle irreversibility of lithium metal oxide cathodes for Li batteries. J. Mater. Sci. 43, 4701–4706 (2008).

    Article  Google Scholar 

  44. De Groot, F. M. F., Fuggle, J. C., Thole, B. T. & Sawatzky, G. A. 2p x-ray absorption of 3d transition-metal compounds: An atomic multiplet description including the crystal field. Phys. Rev. B 42, 5459–5468 (1990).

    Article  Google Scholar 

  45. Lin, F. et al. Hole doping in Al-containing nickel oxide materials to improve electrochromic performance. ACS Appl. Mater. Interfaces 5, 301–309 (2013).

    Article  Google Scholar 

  46. Lin, F. et al. Origin of electrochromism in high-performing nanocomposite nickel oxide. ACS Appl. Mater. Interfaces 5, 3643–3649 (2013).

    Article  Google Scholar 

  47. Liu, W. et al. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. Angew. Chem. Int. Ed. 54, 4440–4457 (2015).

    Article  Google Scholar 

  48. Liu, Y. et al. Phase retrieval using polychromatic illumination for transmission X-ray microscopy. Opt. Express 19, 540–545 (2011).

    Article  Google Scholar 

  49. Liu, Y. et al. TXM-Wizard: A program for advanced data collection and evaluation in full-field transmission X-ray microscopy. J. Synchrotron Radiat. 19, 281–287 (2012).

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies of the US Department of Energy under Contract No. DE-AC02-05CH11231. This research used the Hitachi dedicated STEM of the Center for Functional Nanomaterials, which is a US Department of Energy Office of Science Facility, at Brookhaven National Laboratory under Contract No. DE-SC0012704. The synchrotron X-ray portions of this research were carried out at the Stanford Synchrotron Radiation Lightsource, a Directorate of SLAC National Accelerator Laboratory and an Office of Science User Facility operated for the US Department of Energy Office of Science by Stanford University. Use of the Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, is supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences under Contract No. DE-AC02-76SF00515. F.L. acknowledges J. Xu and C. Tian for valuable discussion. Y.Liu thanks D. Van Campen for valuable discussions and his engineering support for experiments at beamline 6-2C of SSRL. F.L., D.N. and T.-C.W. would like to thank J.-S. Lee and G. Kerr for their assistance at SSRL. This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor the Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by its trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favouring by the United States Government or any agency thereof, or the Regents of the University of California. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof or the Regents of the University of California.

Author information

Author notes

  1. Tsu-Chien Weng

    Present address: † Present address: Center for High Pressure Science & Technology Advanced Research, Shanghai 201203, China.,

Authors and Affiliations

  1. Energy Storage and Distributed Resources Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, USA

    Feng Lin, Yuyi Li, Matthew K. Quan, Lei Cheng & Marca M. Doeff

  2. Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, California 94025, USA

    Dennis Nordlund, Tsu-Chien Weng & Yijin Liu

  3. Department of Materials Science and Engineering, University of California, Berkeley, California 94720, USA

    Lei Cheng

  4. Center for Functional Nanomaterials, Brookhaven National Laboratory, Upton, New York 11973, USA

    Huolin L. Xin

Authors
  1. Feng Lin
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Dennis Nordlund
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Yuyi Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Matthew K. Quan
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Lei Cheng
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Tsu-Chien Weng
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Yijin Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Huolin L. Xin
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Marca M. Doeff
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

F.L., Y.Liu, H.L.X. and M.M.D. participated in conceiving and designing the experiments. F.L. performed the materials syntheses, electrochemical measurements and characterization, and wrote the paper with assistance from M.M.D., Y.Liu and H.L.X. F.L., Y.Liu, D.N. and T.-C.W. designed and performed synchrotron experiments. Y.Liu analysed the TXM tomography data. H.L.X. performed STEM–EELS experiments and co-analysed the data with F.L. Y.Li and M.K.Q. participated in developing materials syntheses. L.C. participated in the data analysis and discussion. M.M.D. supervised the project. All authors participated in discussions and know the implications of the work.

Corresponding authors

Correspondence to Yijin Liu, Huolin L. Xin or Marca M. Doeff.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

Supplementary Figures 1–3. (PDF 516 kb)

Supplementary Video 1

3D chemical distribution of particles collected directly after spray pyrolysis, before annealing. The particle surfaces are first shown from different angles then the colour-coded distribution of each element is shown as slices, to reveal the interior. (MOV 3207 kb)

Supplementary Video 2

3D chemical distribution of particles collected after annealing. The particle surfaces are first shown from different angles then the colour-coded distribution of each element is shown as slices, to reveal the interior. (MOV 5852 kb)

Supplementary Video 3

3D chemical associations for an annealed particle. The initial views show the surfaces of the particle from different viewpoints and later views show slices from the interior, also from different vantages. The colour keys are the same as in Figure 2: Mn is blue, Co is red, Ni is green, Mn/Co is purple, Mn/Ni is cyan, Co/Ni is yellow and Mn/Co/Ni is white. (MOV 9752 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lin, F., Nordlund, D., Li, Y. et al. Metal segregation in hierarchically structured cathode materials for high-energy lithium batteries. Nat Energy 1, 15004 (2016). https://doi.org/10.1038/nenergy.2015.4

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1038/nenergy.2015.4

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing