Controlled access to the border of the Mott insulating state by variation of control parameters offers exotic electronic states such as anomalous and possibly high-transition-temperature (Tc) superconductivity. The alkali-doped fullerides show a transition from a Mott insulator to a superconductor for the first time in three-dimensional materials, but the impact of dimensionality and electron correlation on superconducting properties has remained unclear. Here we show that, near the Mott insulating phase, the upper critical field Hc2 of the fulleride superconductors reaches values as high as ∼90 T—the highest among cubic crystals. This is accompanied by a crossover from weak- to strong-coupling superconductivity and appears upon entering the metallic state with the dynamical Jahn–Teller effect as the Mott transition is approached. These results suggest that the cooperative interplay between molecular electronic structure and strong electron correlations plays a key role in realizing robust superconductivity with high-Tc and high-Hc2.
The interplay between superconductivity and electron correlations is one of the central issues in condensed matter physics. Superconducting (SC) materials based on Mott insulators, such as two-dimensional (2D) cuprates1 and organic charge-transfer salts2, are model platforms that have been extensively studied thus far. A dome-like dependence of the SC transition temperature Tc as a function of tuning parameters, such as carrier doping and pressure, has been discussed as a fingerprint of unconventional superconductivity3. Recent physical and chemical pressure studies of Cs3C60 have revealed that the family of cubic fullerides A3C60 (A: alkali metal), where superconductivity emerges from the Mott insulating state driven by dynamical intramolecular Jahn–Teller (JT) distortions and strong Coulomb repulsion, is a new example of superconductors that show a dome-like SC phase diagram as a function of unit-cell volume V (refs 4, 5, 6, 7, 8, 9). This suggests the importance of strong electron correlation to SC mechanisms10 and the need for further treatment beyond conventional framework of theory11. Recent study has revealed a crossover in the normal state from the conventional Fermi liquid to a nontrivial metallic state where JT distortions persist (JT metal)9,12. There, localized electrons coexist with itinerant electrons microscopically and heterogeneously.
The dependence of the upper critical field Hc2 on Tc is relevant to the understanding of the dome-like SC phase because Hc2 is determined by the coherence length (the size of the Cooper pair) as well as the strength of the pairing potential. Therefore, Hc2 is also important to understand the underlying mechanism of the superconductivity. However, for the fullerides, Hc2 as a function of V has not as yet been determined due to the very large Hc2 and the need for high pressure to access superconductivity in Cs3C60.
Here we report measurements of Hc2 using a pulsed magnetic field in RbxCs3−xC60, where superconductivity appears near the Mott transition even at ambient pressure9. In proximity to the Mott transition, Hc2 is enhanced up to ∼90 T, which is the highest among cubic superconductors. We uncovered that Hc2 and the pairing strength increase concomitantly with increasing lattice volume near the Mott transition, suggesting that molecular characteristics as well as electron correlations play important roles for realizing superconductivity with high-Tc and high-Hc2 in molecular materials.
Temperature dependence of upper critical field
Hc2 of the fulleride superconductors (Fig. 1a) Na2CsC60, K3C60, and RbxCs3−xC60 (0<x3), has been measured by a radiofrequency technique in pulsed magnetic fields13 up to 62 T (see Methods). In RbxCs3−xC60 with x1, the dynamical JT distortions (Fig. 1b) persist down to low temperature and coexist with the metallic state, and superconductivity emerges from this JT metal state (Vmax<V<Vcr, in Fig. 1c). Figure 2 shows temperature (T) variations of frequency shift Δf as a function of the magnetic field H for RbxCs3−xC60 (x=2, 0.75, and 0.35) (see also Supplementary Fig. 1). The T dependence of Hc2, Hc2(T), was determined as a point at which Δf intercepts the normal-state background (arrows in Fig. 2). Hc2(T) curves for A3C60 are plotted in Fig. 3a,b for VVmax and Vmax<V<Vcr in the proximity of the Mott transition, respectively. Hc2(T) increases linearly with decreasing T near Tc and has a tendency to saturate at low temperatures. No obvious upturn of Hc2(T) is found in any of the samples measured, implying that Hc2(T) can be understood within a simple single-band picture despite the multiband nature of the triply degenerate t1u orbitals of anions, in contrast to MgB2 and iron pnictides where multiband and multigap behaviour with upturn or quasilinear T dependence down to T∼0 is commonly observed.
In spin-singlet superconductors, Hc2 is determined by two distinct effects, i.e., the orbital and the Pauli paramagnetic effect. The orbital limit and Pauli limit are given by and , respectively (Φ0, ξGL, Δ0, and μB are the flux quantum, Ginzburg–Landau (GL) coherence length, superconducting gap and Bohr magneton, respectively)14,15. In a weak-coupling BCS superconductor, the Pauli limit is [T]=1.84Tc[K]. A simple estimation from gives ξGL=1.8–4.6 nm (Supplementary Table 1), which is comparable to the lattice constant. It should be noted that the fulleride superconductors are in the dirty limit, ℓ≲ξ0 (ℓ and ξ0 are the mean free path and Pippard coherence length, respectively), as demonstrated by transport and optical measurements16,17. The orientational disorder of the anions can account for the short ℓ, which is comparable to the intermolecular separation. The relation in the dirty limit, where ξ0=ħvF/πΔ0 and (vF, m, kF, and N are the Fermi velocity, effective mass, Fermi momentum, and number of electrons per C60, respectively) for the parabolic band approximation yield . In the extreme cases ( or ), Hc2(0) is determined solely by Hc2orb or HP. However, when these two quantities are comparable, Hc2(T) can be described by the extended WHH formula14, which considers both the orbital and Pauli paramagnetic effects as well as spin–orbit scattering,
where t=T/Tc, =0.281Hc2(T)/, , , is the digamma function, and λso is the spin–orbit scattering constant. With fixed , finite α reduces Hc2(0), but it recovers toward the original value with increasing λso, since spin–orbit scattering suppresses the Pauli paramagnetic effect.
was estimated from the initial slope of Hc2(T) since the Pauli paramagnetic effect is not relevant near Tc (Supplementary Note 1; Supplementary Fig. 2; and Supplementary Table 1). Then, Hc2(T) curves were fitted with HP and λso as fitting parameters. As shown by the solid lines in Fig. 3a,b, Hc2(T) curves are well described by equation (1). Figure 3c shows Hc2(T) normalized by as a function of T/Tc. The normalized Hc2(T) curves collapse into a single curve except for Na2CsC60, implying that the parameters α and λso are unchanged in a wide V region of the phase diagram, resulting in (α, λso)=(1.5, 4.4). Figure 3d displays the evolution of Hc2(0) as a function of V, together with . Hc2(0) reaches as high as 88 T in RbxCs3−xC60 with x1 (VVmax) very close to the Mott transition. Moreover, Hc2(0) is clearly larger than at V>Vmax, and the difference between Hc2(0) and becomes pronounced with increasing V, although Tc is almost unchanged near the Mott transition.
Hc2(0) values reaching ∼90 T are remarkably high for 3D materials. Typical examples of 3D superconductors are cubic Nb3Sn (Hc2(0)=30 T, Tc=18 K), which is well known as a material for a SC magnet18, and Ba1−xKxBiO3 (Hc2(0)=32 T, Tc=28 K)19. MgB2 exhibits strong anisotropy (Hc2(0)=49 T and 34 T parallel to the ab plane and c axis, respectively, Tc=39 K)18 due to its anisotropic electronic structure. Hc2(0) of the fullerides is even higher than that of recently discovered H3S superconductors with likely a cubic structure (Hc2(0)≈70 T, Tc=203 K)20 despite its much higher Tc. In 2D systems under in-plane applied fields, the orbital effect is quenched and higher Hc2 can be expected. Very large Hc2 compared with low Tc has been demonstrated in ion-gated MoS2 (Hc2(0)=52 T, Tc=9.7 K)21,22 and monolayer NbSe2 (Hc2(0)=32 T, Tc=3.0 K)23. In the bulk materials, the in-plane Hc2 of the cuprates is exceptionally high at above 100 T. However, Hc2 is no longer a thermodynamic transition line, but a crossover line due to thermal fluctuations. Contrastingly, Hc2 in pnictides with Tc≃30 K is as large as that of fullerides24. Therefore, our results highlight the uniquely high Hc2 measured in the fulleride superconductors that are cubic, and thus, 3D.
To understand the underlying mechanisms for the evolution of Hc2(0), we estimated unknown parameters that determine HP and (Supplementary Fig. 1), that is, Δ0 and the product of parameters in the normal state . Δ0 can be directly estimated from HP. In Fig. 3e, the V dependences of 2Δ0/kBTc, which is related to the strength of the pairing interaction, and (m0 is the bare electron mass) are shown. At low V, 2Δ0/kBTc is comparable to the BCS weak-coupling limit value of 3.52. In contrast with the dome-shaped Tc, 2Δ0/kBTc continuously increases with increasing V and reaches values as large as 6, indicating a crossover from weak- to strong-coupling superconductivity on approaching the Mott transition. This is in good agreement with the previous nuclear magnetic resonance results for RbxCs3−xC60 at ambient pressure9 and for both fcc- and A15-Cs3C60 under pressure25,26, implying universal behaviour in the fullerides. On the other hand, is almost constant, indicating that both HP/Tc and /Tc are solely proportional to 2Δ0/kBTc. These results lead to the conclusion that the enhancement of Hc2(0) is dominated by the strong-coupling effect developing near the Mott transition.
We here recall Hc2(0) of other families of high-Tc or strongly correlated superconductors, i.e., cuprates, organic κ-(ET)2X, and pnictides24,27,28,29,30,31, having a dome-like SC phase and a proximate antiferromagnetic phase. In Fig. 4, Hc2(0)/Tc is displayed as a function of the relevant tuning parameter for each materials family. We show Hc2(0) for the in-plane field (H ⊥ c), where the Pauli paramagnetic effect is dominating, in κ-(ET)2X and pnictides but show Hc2(0) for the out-of-plane field (H || c) in cuprates since there are no reliable estimates of Hc2(0) for H ⊥ c. A remarkable feature of the fullerides is that Hc2(0)/Tc appears to be strongly enhanced at x≤1, where the JT metal phase emerges (Fig. 1c), with retaining nearly optimal Tc and Hc2(0) values near the Mott transition. This is in marked contrast to the pnictides and cuprates. In the pnictides, Hc2(0)/Tc is almost constant across the SC dome. This is ascribed to the variation of Δ0, which linearly scales with Tc (ref. 32), implying constant coupling strength. Moreover, in pnictides, Tc and Hc2(0) are strongly reduced upon decreasing doping, associated with the appearance of the antiferromagnetic phase. Non-monotonic behaviour in cuprates appears with mass enhancement near p=0.08 and 0.18, which originates from phase competition between superconductivity and Fermi-surface reconstruction or charge-density-wave order27. This is distinct from the continuous evolution of in the fullerides (Supplementary Fig. 2), suggesting the absence of such competing states. In κ-(ET)2X, there is no competing phase near the Mott transition and the molecular degrees of freedom are not relevant to the superconductivity in contrast to the fullerides. Moreover, the SC pairing is most likely mediated by purely electronic interaction, in contrast to the fullerides, where there is considerable controversy because of comparable energy scales in the electron–phonon and electron-electron interactions33,34. κ-(ET)2X shows qualitatively similar behaviour with the strong-coupling effects near the antiferromagnetic phase35. However, the enhancement of Hc2(0)/Tc is much weaker than that in the fullerides. Therefore, the steep enhancement of Hc2(0)/Tc and 2Δ0/kBTc upon entering the JT metal phase cannot be explained solely by the electron correlation effect, highlighting the uniqueness of fullerides among the high-Tc or strongly correlated superconductors. We also emphasize that it is difficult to reconcile the strong-coupling effect with the electron–phonon coupling alone25. Our results establish the importance of both molecular characteristics, absent in the atom-based superconductors, involving the dynamical JT effect and the resulting renormalization of the electronic structure and electron correlation effects for both the high-Tc and the high-Hc2 in the fullerides, as supported by the recent theoretical calculations33. This provides a new perspective on realizing robust superconductivity with high Tc and Hc2 in molecular materials.
Sample synthesis and characterization
Fullerene superconductors Na2CsC60, K3C60, and RbxCs3−xC60 (0<x3) were synthesized by solid-vapor reaction method as described in ref. 9. The samples used here were identical to those in ref. 9. For RbxCs3−xC60 with x=0.5, 1, and 2, our samples correspond to Rb0.5Cs2.5C60 (Sample I), RbCs2C60 (Sample I), and Rb2CsC60 (Sample II) in ref. 9, respectively. The samples were characterized by synchrotron X-ray powder diffraction and magnetization measurements. The phase fraction of the fcc phase was larger than 70% and typical shielding fraction was ∼90%.
Measurements of H c2
Contactless radiofrequency (r.f.) penetration depth measurements were performed using a proximity detector oscillator technique13 and a pulsed magnetic field up to 62 T in Los Alamos NHMFL. The typical resonant frequency was ∼28 MHz. The r.f. technique is highly sensitive to small changes (approximately 1–5 nm) in the r.f. penetration depth λ, and thus, it is an accurate method for determining Hc2 of superconductors. Powder samples were compressed into pellets and sealed in thin glass capillaries with a small amount of He gas. Coils that generate and detect microwave signals are directly wound around the capillary (inset of Fig. 2a). The relative change of λ is proportional to the relative change of the resonating frequency f through the inductance of the coil, that is, Δf/f∝Δλ/λ (ref. 13). Upper critical field Hc2 was determined from the field dependence of the frequency shift Δf (Supplementary Fig. 1) as the point at which the slope of the r.f. signal in the superconducting state intercepts the slope of the normal state background.
The data that support the findings of this study are available on request from the corresponding authors (Y.K. or Y.I.).
How to cite this article: Kasahara, Y. et al. Upper critical field reaches 90 Tesla near the Mott transition in fulleride superconductors. Nat. Commun. 8, 14467 doi: 10.1038/ncomms14467 (2017).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
We thank Y. Nomura, R. Arita and E. Tosatti for fruitful discussions. This work was supported in part by Grants-in-Aid for Specially Promoted Research (No 25000003), for Young Scientists (B) (No 2474022), and for Scientific Research on Innovative Areas ‘3D Active-Site Science’ (No 26105004) and ‘J-Physics' (No 15H05882) from JSPS, Japan, and SICORP-LEMSUPER FP7-NMP-2011-EU-Japan project (No 283214). This work was also supported by the Mitsubishi Foundation and sponsored by the ‘World Premier International (WPI) Research Center Initiative for Atoms, Molecules and Materials,’ Ministry of Education, Culture, Sports, Science, and Technology (MEXT) of Japan. K.P. and M.J.R. thank EPSRC for support (EP/K027255 and EP/K027212). M.J.R. is a Royal Society Research Professor. RMcD acknowledges support from U.S. Department of Energy Office of Basic Energy Sciences ‘Science at 100 T’ program and that a portion of this work was performed at the National High Magnetic Field Laboratory, which is supported by National Science Foundation Cooperative Agreement No DMR-1157490 and the State of Florida.
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/