In Fig. 3 of this article, there are a number of errors in the colours used for the data points and curves. In Fig. 3b, the blue data should be green, referring to a thickness of ‘3.5 nm’, and the green data should be blue, referring to a thickness of ‘8 nm’. In Fig. 3d, the blue data should be green and refer to a thickness of ‘3.5 nm’, the green data should be blue and refer to a thickness of ‘8 nm’ and the orange data should refer to a thickness of ‘13 nm’.
In Table 1, the Pd contacts on 13–14.5 nm of BP were ‘Unipolar p-type’, not ‘Unipolar n-type’.
The correct version of Fig. 3 and Table 1 appear below.
Additional information
The online version of the original article can be found at 10.1038/ncomms8809
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Perello, D., Chae, S., Song, S. et al. Correction: Corrigendum: High-performance n-type black phosphorus transistors with type control via thickness and contact-metal engineering. Nat Commun 7, 10428 (2016). https://doi.org/10.1038/ncomms10428
Published:
DOI: https://doi.org/10.1038/ncomms10428
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
