Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates

Abstract

Diminishing fossil fuel reserves and growing concerns about global warming indicate that sustainable sources of energy are needed in the near future. For fuels to be useful in the transportation sector, they must have specific physical properties that allow for efficient distribution, storage and combustion; these properties are currently fulfilled by non-renewable petroleum-derived liquid fuels. Ethanol, the only renewable liquid fuel currently produced in large quantities, suffers from several limitations, including low energy density, high volatility, and contamination by the absorption of water from the atmosphere. Here we present a catalytic strategy for the production of 2,5-dimethylfuran from fructose (a carbohydrate obtained directly from biomass or by the isomerization of glucose) for use as a liquid transportation fuel. Compared to ethanol, 2,5-dimethylfuran has a higher energy density (by 40 per cent), a higher boiling point (by 20 K), and is not soluble in water. This catalytic strategy creates a route for transforming abundant renewable biomass resources1,2 into a liquid fuel suitable for the transportation sector, and may diminish our reliance on petroleum.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Normal boiling points of representative C 6 -hydrocarbons formed by removal of oxygen atoms from hexoses, compared to the normal boiling point of ethanol.
Figure 2: Schematic diagram of the process for conversion of fructose to DMF.
Figure 3: Effect of extraction ratio R on HMF selectivity from fructose for various organic solvents.

Similar content being viewed by others

References

  1. Parikka, M. Global biomass fuel resources. Biomass Bioenergy 27, 613–620 (2004)

    Article  Google Scholar 

  2. Ragauskas, A. J. et al. The path forward for biofuels and biomaterials. Science 311, 484–489 (2006)

    Article  ADS  CAS  Google Scholar 

  3. Barlow, M. T., Smith, D. J. & Steward, D. G. Fuel composition. European patent EP0082689. (1983)

  4. Román-Leshkov, Y., Chheda, J. N. & Dumesic, J. A. Phase modifiers promote efficient production of hydroxymethylfurfural from fructose. Science 312, 1933–1937 (2006)

    Article  ADS  Google Scholar 

  5. Brown, D. W., Floyd, A. J., Kinsman, R. G. & Roshan-Ali, Y. Dehydration reactions of fructose in non-aqueous media. J. Chem. Technol. Biotechnol. 32, 920–924 (1982)

    Article  CAS  Google Scholar 

  6. Kuster, B. M. F. 5-Hydroxymethylfurfural (HMF). A review focussing on its manufacture. Starch 42, 314–321 (1990)

    Article  CAS  Google Scholar 

  7. Moreau, C., Belgacem, M. N. & Gandini, A. Recent catalytic advances in the chemistry of substituted furans from carbohydrates and in the ensuing polymers. Top. Catal. 27, 11–30 (2004)

    Article  CAS  Google Scholar 

  8. Szmant, H. H. & Chundury, D. D. The preparation of 5-hydroxymethylfurfuraldehyde from high fructose corn syrup and other carbohydrates. J. Chem. Technol. Biotechnol. 31, 135–145 (1981)

    Article  CAS  Google Scholar 

  9. van Dam, H. E., Kieboom, A. P. G. & van Bekkum, H. The conversion of fructose and glucose in acidic media: Formation of hydroxymethylfurfural. Starch 38, 95–101 (1986)

    Article  CAS  Google Scholar 

  10. Eisen, E. O. & Joffe, J. Salt effects in liquid-liquid equilibria. J. Chem. Eng. Data 11, 480–484 (1966)

    Article  CAS  Google Scholar 

  11. Tan, T. C. & Aravinth, S. Liquid-liquid equilibria of water/acetic acid/1-butanol system—effects of sodium (potassium) chloride and correlations. Fluid Phase Equil. 163, 243–257 (1999)

    Article  CAS  Google Scholar 

  12. Neier, W., Webers, W., Ruckhaber, R., Osterburg, G. & Ostwald, W. Continuous production of sec-butanol. German patent DE3040997. (1982)

  13. Jones, D. T. & Woods, D. R. Acetone-butanol fermentation revisited. Microbiol. Rev. 50, 484–524 (1986)

    CAS  PubMed  PubMed Central  Google Scholar 

  14. Ramey, E. D. Continuous two-stage dual path anaerobic fermentation of butanol and other organic solvents using two different strains of bacteria. US patent US5753474. (1998)

  15. Manly, D. G. & Dunlop, A. P. Catalytic hydrogenation. I. Kinetics and catalyst composition in the preparation of 2-methylfuran. J. Org. Chem. 23, 1093–1095 (1958)

    Article  CAS  Google Scholar 

  16. Rao, R. S., Baker, R. T. & Vannice, M. A. Furfural hydrogenation over carbon-supported copper. Catal. Lett. 60, 51–57 (1999)

    Article  CAS  Google Scholar 

  17. Zheng, H.-Y. et al. Towards understanding the reaction pathway in vapour phase hydrogenation of furfural to 2-methylfuran. J. Mol. Catal. Chem. 246, 18–23 (2006)

    Article  CAS  Google Scholar 

  18. Twigg, M. V. & Spencer, M. S. Deactivation of supported copper metal catalysts for hydrogenation reactions. Appl. Catal. A 212, 161–174 (2001)

    Article  CAS  Google Scholar 

  19. Helms, C. R. & Sinfelt, J. H. Electron spectroscopy (ESCA) studies of ruthenium-copper catalysts. Surf. Sci. 72, 229–242 (1978)

    Article  ADS  CAS  Google Scholar 

  20. Sinfelt, J. H. Supported bimetallic cluster catalysts. J. Catal. 29, 308–315 (1973)

    Article  CAS  Google Scholar 

  21. Sinfelt, J. H., Lam, Y. L. & Cusumano, J. A. Nature of ruthenium-copper catalysts. J. Catal. 42, 227–237 (1976)

    Article  CAS  Google Scholar 

  22. Broughton, D. B. & Gerhold, C. G. Continuous sorption process employing fixed beds of sorbent and moving inlets and outlets. US Patent US2985589. (1961)

  23. Hashimoto, K., Adachi, S. & Shirai, Y. in Preparative and Production Scale Chromatography (eds Ganestos, G. & Barker, P. E.) 395–417 (CRC Publishing, New York, 1993)

    Google Scholar 

  24. Jones, J. H., Fenske, M. R. & Rusk, R. A. Vapor-phase oxidation as a process for raising octane number. Ind. Eng. Chem. Prod. Res. Dev. 10, 57–65 (1971)

    Article  CAS  Google Scholar 

  25. Graboski, M. S. An Analysis of Alternatives for Unleaded Petrol Additives for South Africa (Technical Report, United Nations Environment Programme, Nairobi, Kenya, 2003); available at 〈http://www.unep.org/PCFV/PDF/PubGraboskiReport.pdf

Download references

Acknowledgements

This work was supported by the National Science Foundation Chemical and Transport Systems Division of the Directorate for Engineering, and the US Department of Energy Office of Basic Energy Sciences. We thank R. McClain and the UW Chemistry Department for access to their mass spectrometer. We also thank D. Simonetti, R. West, J. Chheda, E. Kunkes, S. Chen and S. Laumann for discussions and technical assistance.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to James A. Dumesic.

Ethics declarations

Competing interests

Reprints and permissions information is available at www.nature.com/reprints. The authors declare no competing financial interests.

Supplementary information

Supplementary Information

This file contains Supplementary Figures 1-2 with an annotated version of Figure 2 in the main text summarizing the main findings of the work and a diagram depicting the vapor-phase hydrogenolysis flow reactor; Supplementary Methods used for compound quantification and characterization; Supplementary Discussion regarding vapor-phase hydrogenolysis experiments; Supplementary Tables 1-4 summarizing results regarding the use of additional inorganic salts for the dehydration experiments, as well as results for both liquid and vapor-phase hydrogenolysis experiments; Supplementary Notes with additional information regarding the estimation for the energy consumption in a distillation process for DMF and ethanol, toxicology data for DMF and additional references. (PDF 450 kb)

Rights and permissions

Reprints and permissions

About this article

Cite this article

Román-Leshkov, Y., Barrett, C., Liu, Z. et al. Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates. Nature 447, 982–985 (2007). https://doi.org/10.1038/nature05923

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nature05923

This article is cited by

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing