Featured
-
-
Article
| Open AccessScaling of damage mechanism for additively manufactured alloys at very high cycle fatigue
- B. S. Voloskov
- , M. V. Bannikov
- & I. V. Sergeichev
-
Article
| Open AccessThe influence of hot isostatic pressing on precipitates, mechanical properties of Mg-12Gd-0.8Zn-0.4Zr (wt.%) alloy manufactured by sand casting
- Dan Wang
- , Chao Ma
- & Yangyang Yu
-
Article
| Open AccessInvestigation of damping coefficients for elastic collision particles utilizing the acoustic frequency sampling method
- Xinlin Shi
- , Wenzhen Zhong
- & Dengchao Sun
-
Article
| Open AccessShort-term creep approach to redefining the role of 17-4PH stainless steel for high-temperature applications
- S. Spigarelli
- , M. Cabibbo
- & E. Santecchia
-
Article
| Open AccessElectrochemical properties of MnSe inclusions and improving the pitting corrosion resistance of stainless steel via Se microalloying
- Masashi Nishimoto
- , Tomoki Katsuyama
- & Izumi Muto
-
Article
| Open AccessInfluence of nano-BN inclusion and mechanism involved on aluminium-copper alloy
- Ziqi Zhang
- , Qi Zeng
- & Rong Li
-
Article
| Open AccessRevealing process and material parameter effects on densification via phase-field studies
- Marco Seiz
- , Henrik Hierl
- & Wolfgang Rheinheimer
-
Article
| Open AccessCombined effect of interstitial-substitutional elements on dislocation dynamics in nitrogen-added austenitic stainless steels
- Yasuhito Kawahara
- , Shunya Kobatake
- & Jun-ichi Hamada
-
Article
| Open AccessTransitioning solidification mode via electroplated Ni coatings in martensitic stainless steel resistance spot welds: new insights into fabricating tough microstructure
- Hamidreza Aghajani
- , Milad Bahrami Balajaddeh
- & Majid Pouranvari
-
Article
| Open AccessIntermetallic and dispersoid structures in AA3104 aluminium alloy during two-step homogenisation
- S. L. George
- & L. Magidi-Chicuba
-
Article
| Open AccessUnsupervised machine learning combined with 4D scanning transmission electron microscopy for bimodal nanostructural analysis
- Koji Kimoto
- , Jun Kikkawa
- & Fumihiko Uesugi
-
Article
| Open AccessProperties of AlxGa1−xAs grown from a mixed Ga–Bi melt
- Olga Khvostikova
- , Alexey Vlasov
- & Vladimir Khvostikov
-
Article
| Open AccessAssessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions
- Ladislav Socha
- , Tomáš Prášil
- & Petr Nuska
-
Article
| Open AccessCrack reduction in laser powder bed fusion of MnAl(C) using graphene oxide coated powders
- Simon Tidén
- , Himesha Abenayake
- & Martin Sahlberg
-
Article
| Open AccessMultifunctional metallic nanocomposite for overcoming the strength–ductility trade-off
- Asheesh R. Lanba
- , Reginald F. Hamilton
- & Richard F. Gordon
-
Article
| Open AccessDevelopment of deoxidation process for off-grade titanium sponge using magnesium metal with wire mesh strainer type of crucible
- Sung-Hun Park
- , Hyeong-Jun Jeoung
- & Jungshin Kang
-
Article
| Open AccessQuasi-instantaneous materials processing technology via high-intensity electrical nano pulsing
- Eugene A. Olevsky
- , Runjian Jiang
- & Elisa Torresani
-
Article
| Open AccessImpact of crystalline orientation on Cu–Cu solid-state bonding behavior by molecular dynamics simulations
- Hiroaki Tatsumi
- , C. R. Kao
- & Hiroshi Nishikawa
-
Article
| Open AccessA study on the fabrication of metal microneedle array electrodes for ECG detection based on low melting point Bi–In–Sn alloys
- Hyunjong Gwak
- , Sungbo Cho
- & Soonmin Seo
-
Article
| Open AccessBiaxial tensile behavior of stainless steel 316L manufactured by selective laser melting
- Hao Wang
- , Xiaoyong Shu
- & I. V. Alexandrov
-
Article
| Open AccessChange of dominant material properties in laser perforation process with high-energy lasers up to 120 kilowatt
- Stefan Reich
- , Marcel Goesmann
- & Jens Osterholz
-
Article
| Open AccessStructural characterization of newly-developed Al79Ni5Fe5Y11 and Al79Ni11Fe5Y5 alloys with amorphous matrixes
- Katarzyna Młynarek-Żak
- , Indu Dhiman
- & Rafał Babilas
-
Article
| Open AccessCrystal plasticity simulations with representative volume element of as-build laser powder bed fusion materials
- Dmitry S. Bulgarevich
- , Sukeharu Nomoto
- & Masahiko Demura
-
Article
| Open AccessImproved maximum likelihood method for P-S-N curve fitting method with small number specimens and application in T-welded joint
- Wenfei Liu
- , Li Zhang
- & Hailang Liu
-
Article
| Open AccessUnderstanding the hot isostatic pressing effectiveness of laser powder bed fusion Ti-6Al-4V by in-situ X-ray imaging and diffraction experiments
- Tatiana Mishurova
- , Sergei Evsevleev
- & Giovanni Bruno
-
Article
| Open AccessCharacterisation of AZ31 metal matrix composites reinforced with carbon nanotubes
- Sandeep Ganesh Mukunda
- , Satish Babu Boppana
- & T. Aravinda
-
Article
| Open AccessResearch on the integral forming process of thin walled and thick mouth seamless gas cylinders
- Chen Wang
- , Haofei Yu
- & Qiaofeng Bai
-
Article
| Open AccessDesign of Laves phase-reinforced compositionally complex alloy
- Gerald Ressel
- , Florian Biermair
- & Vsevolod I. Razumovskiy
-
Article
| Open AccessEffect of microstructure refinement of pure copper on improving the performance of electrodes in electro discharge machining (EDM)
- Jacek Skiba
- , Mariusz Kulczyk
- & Kamil Nowak
-
Article
| Open AccessProbing corrosion using a simple and versatile in situ multimodal corrosion measurement system
- Sridhar Niverty
- , Rajib Kalsar
- & Vineet V. Joshi
-
Article
| Open AccessKey topographic parameters driving surface adhesion of Porphyromonas gingivalis
- Steve Papa
- , Mathieu Maalouf
- & Virginie Dumas
-
Article
| Open AccessThe effect of material defect orientation on rolling contact fatigue of a ball bearing
- Akbar Ghazanfari Holagh
- & Javad Alizadeh Kaklar
-
Article
| Open AccessInteractions between C-steel and blended cement in concrete under radwaste repository conditions at 80 °C
- Margit Fabian
- , Otto Czompoly
- & Laurent De Windt
-
Article
| Open AccessThe role of internal defects on anisotropic tensile failure of L-PBF AlSi10Mg alloys
- Zhengkai Wu
- , Shengchuan Wu
- & Philip J. Withers
-
Article
| Open AccessExperimental investigation and quantitative prediction in interference-fit size of CFRP riveted joints under a transversal ultrasonic vibration-assisted riveting
- Xingxing Wang
- , Yunyang Shi
- & Yegao Chen
-
Article
| Open AccessOff-stoichiometry and molybdenum substitution effects on elastic moduli of B1-type titanium carbide
- Shuntaro Ida
- , Kotaro Hoshizaki
- & Kyosuke Yoshimi
-
Article
| Open AccessStrengthening the mechanical characteristics and cathodic delamination resistance of fiber-reinforced polymer through chemical surface modification of glass fibers
- M. Shariatmadar
- , S. Feizollahi
- & M. Mahdavian
-
Article
| Open AccessExperimental study on high temperature tensile behaviour of aluminium alloy AA5083 with oscillating load
- Mohammad Shirinzadeh Dastgiri
- , Zackary Fuerth
- & Daniel Green
-
Article
| Open AccessCorrosion behavior and microstructure of Al–10Zn alloy with nano CuO addition
- Eman AbdElRhiem
- , Saad G. Mohamed
- & Shereen M. Abdelaziz
-
Article
| Open AccessArtificial intelligence inspired design of non-isothermal aging for γ–γ′ two-phase, Ni–Al alloys
- Vickey Nandal
- , Sae Dieb
- & Masahiko Demura
-
Article
| Open AccessGeneration of synthetic microstructures containing casting defects: a machine learning approach
- Arjun Kalkur Matpadi Raghavendra
- , Laurent Lacourt
- & Henry Proudhon
-
Article
| Open AccessEfficient machine learning of solute segregation energy based on physics-informed features
- Zongyi Ma
- & Zhiliang Pan
-
Article
| Open AccessFeasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625
- C. V. Amavisca
- , L. Bergmann
- & B. Klusemann
-
Article
| Open AccessMeasurements and predictions of diffusible hydrogen escape and absorption in catholically charged 316LN austenitic stainless steel
- Melissa Weihrauch
- , Maulik Patel
- & Eann A. Patterson
-
Article
| Open AccessFirst-principles demonstration of band filling-induced significant improvement in thermodynamic stability and mechanical properties of Sc\(_{1-x}\)Ta\(_{x}\)B\(_{2}\) solid solutions
- Kunpot Mopoung
- , Annop Ektarawong
- & Björn Alling
-
Article
| Open AccessControlling grain structure in metallic additive manufacturing using a versatile, inexpensive process control system
- Lova Chechik
- , Alexander D. Goodall
- & Iain Todd
-
Article
| Open AccessNanosilica treatment enables moisture-resistant hydrophobic arc welding covered electrodes
- Mohammadreza Pasandeh
- & Majid Pouranvari
-
Article
| Open AccessAnalysis of the carbide precipitation and microstructural evolution in HCCI as a function of the heating rate and destabilization temperature
- M. Agustina Guitar
- , U. Pranav Nayak
- & Frank Mücklich
-
Article
| Open AccessHeat source modeling, penetration analysis and parametric optimization of super spray MAG welding
- Zhifeng Li
- & Yimin Xia