Featured
-
-
Article
| Open AccessFormation and energetics of head-to-head and tail-to-tail domain walls in hafnium zirconium oxide
- Tanmoy Kumar Paul
- , Atanu Kumar Saha
- & Sumeet Kumar Gupta
-
Article
| Open AccessUse of a natural rock material as a precursor to inhibit corrosion of Ti alloy in an aggressive phosphoric acid medium
- Amany M. Fekry
- , Inna V. Filippova
- & Lev O. Filippov
-
Article
| Open AccessFlexural failure properties of fiber-reinforced hybrid laminated beam subject to three-point bending
- Getahun Tefera
- , Sarp Adali
- & Glen Bright
-
Article
| Open AccessStudy of biopolymer encapsulated Eu doped Fe3O4 nanoparticles for magnetic hyperthermia application
- Krishna Priya Hazarika
- & J. P. Borah
-
Article
| Open AccessEffects of freeze–thaw on bank soil mechanical properties and bank stability
- Zhen Yang
- , Xianyou Mou
- & Jianghao Zhang
-
Article
| Open AccessGreen synthesis and characterization of binary, ternary, and quaternary Ti/MMO anodes for chlorine and oxygen evolution reactions
- A. B. Abdel-Aziz
- , F. El-Taib Heakal
- & I. M. Ghayad
-
Article
| Open AccessResearch on optimization of basic rail top bending prediction model
- Chunjiang Liu
- , Zhikui Dong
- & Nanbing Qiao
-
Article
| Open AccessStatic magnetic field-induced IL-6 secretion in periodontal ligament stem cells accelerates orthodontic tooth movement
- Shitong Luo
- , Zhilian Li
- & Yali Liu
-
Article
| Open AccessStudy of the changes in the microstructures and properties of grease using ball milling to simulate a bearing shear zone on grease
- Jia Ren
- , Haopeng Cai
- & Xiaobo Wang
-
-
Article
| Open AccessInvestigation of temperature effects on wide steel box girder of suspension bridge based on long-term monitoring data
- Yanru Wang
- , Guoliang Zhang
- & Lei Zhou
-
Article
| Open AccessAdvanced humidity sensing properties of CuO ceramics
- Kaniknun Sreejivungsa
- , Noppakorn Thanamoon
- & Prasit Thongbai
-
Article
| Open AccessEnhancement of superconductivity and phase diagram of Ta-doped Kagome superconductor CsV3Sb5
- Jinjin Liu
- , Qing Li
- & Zhiwei Wang
-
Article
| Open AccessDeep convolutional generative adversarial network for generation of computed tomography images of discontinuously carbon fiber reinforced polymer microstructures
- Juliane Blarr
- , Steffen Klinder
- & Kay A. Weidenmann
-
Article
| Open AccessDependence of mechanical properties on the phase composition of intercritically annealed medium-Mn steel as the main competitor of high-strength DP steels
- Adam Skowronek
- , Adam Grajcar
- & Roumen H. Petrov
-
Article
| Open AccessDiffraction-based approach for real-time monitoring of nanosecond direct laser interference patterning structure formation on stainless steel
- Ignacio Tabares
- , Marcos Soldera
- & Andrés Fabián Lasagni
-
Article
| Open AccessEnhancing hydrogen generation from sodium borohydride hydrolysis and the role of a Co/CuFe2O4 nanocatalyst in a continuous flow system
- Faezeh Mirshafiee
- & Mehran Rezaei
-
Article
| Open AccessPHOTH-graphene: a new 2D carbon allotrope with low barriers for Li-ion mobility
- E. A. J. Santos
- , K. A. L. Lima
- & L. A. Ribeiro Junior
-
Article
| Open AccessAdditive roles of antiferromagnetically coupled elements in the magnetic proximity effect in the GdFeCo/Pt system
- Jung Yun Kee
- , Kook Tae Kim
- & Jun Woo Choi
-
Article
| Open AccessAchieving water-floatable photocatalyst on recycled bamboo chopsticks
- Sujun Guan
- , Lijun Wang
- & Akira Fujishima
-
Article
| Open AccessInfluence of low-cost Thai leucoxene minerals on the growth, bioactive compounds, and antibacterial activities of Chrysanthemum indium L. cuttings in in vitro culture
- Sorapong Pavasupree
- , Nattapong Chanchula
- & Porramain Porjai
-
Editorial
| Open AccessProspects of sustainable polymers
Synthetic polymers have shown a great impact on every aspect of our life and attained an exponential rise in their production and utilization in the past decades due to their durability, flexibility, moldability, and inexpensive nature. However, the use of natural polymers or development of safe and environment-friendly synthetic bio-based polymers is continuously undergoing for a sustainable future owing to the exhaustion of petroleum-based resources or fossil-based materials, disposal and economical concerns, including government guidelines. In this regard, the development of new sustainable polymers or materials will step up and build a genuinely circular economy by decreasing manufacture or utilization of fossil-based materials as limited reserves.
- Anuj Kumar
- , Vijay Kumar Thakur
- & Kwan-Soo Lee
-
Article
| Open AccessTuning the electronic properties and band offset of h-BN/diamond mixed-dimensional heterostructure by biaxial strain
- Yipu Qu
- , Hang Xu
- & Yuhuai Liu
-
Article
| Open AccessDesign and analysis of a complementary structure-based high selectivity tri-band frequency selective surface
- Zhiming Li
- , Xiaolong Weng
- & Mei Bi
-
Article
| Open AccessThe influence of hot isostatic pressing on precipitates, mechanical properties of Mg-12Gd-0.8Zn-0.4Zr (wt.%) alloy manufactured by sand casting
- Dan Wang
- , Chao Ma
- & Yangyang Yu
-
Article
| Open AccessProportioning optimization of transparent rock-like specimens with different fracture structures
- Jie Cui
- , Junshan Hao
- & Kuilong Wang
-
Article
| Open AccessIonic liquids adsorption and interfacial tension reduction for synthetic resinous and asphaltenic oils: salinity and pH effects
- Seyed Ehsan Moradi
- , Seyednooroldin Hosseini
- & Elias Ghaleh Golab
-
Article
| Open AccessOptimization and modelling of magnesium oxide (MgO) photocatalytic degradation of binary dyes using response surface methodology
- Hyeong Kwang Benno Park
- , Pushpendra Kumar
- & Anuruddh Kumar
-
Article
| Open AccessThe influence of nanosunflower ash and nanowalnut shell ash on sustainable lightweight self-compacting concrete characteristics
- Nahla Hilal
- , Nadhim Hamah Sor
- & Taher A. Tawfik
-
Article
| Open AccessImprovement of roughness in ultrasonic assisted magnetorheological finishing of small titanium alloy nuts by orthogonal test method
- Cheng Bi
- , Axiang Ji
- & Fenfen Zhou
-
Article
| Open AccessNeutron instrument concepts for a high intensity moderator at the European spallation source
- Stavros Samothrakitis
- , Mads Bertelsen
- & Markus Strobl
-
Article
| Open AccessBasic magnesium sulfate@TiO2 composite for efficient adsorption and photocatalytic degradation of 4-dodecylmorpholine in brine
- Zhongmei Song
- , Huifang Zhang
- & Zhijian Wu
-
Article
| Open AccessEnhancing physical characteristics and antibacterial efficacy of chitosan through investigation of microwave-assisted chemically formulated chitosan-coated ZnO and chitosan/ZnO physical composite
- Sara A. Ali
- , E. S. Ali
- & Moataz A. Elsawy
-
Article
| Open AccessEvaluating the effect of unidirectional loading on the piezoresistive characteristics of carbon nanoparticles
- Bruno Alderete
- , Frank Mücklich
- & Sebastian Suarez
-
Article
| Open AccessEnhanced Stability, Superior Anti-Corrosive, and Tribological Performance of Al2O3 Water-based Nanofluid Lubricants with Tannic Acid and Carboxymethyl Cellulose over SDBS as Surfactant
- Dieter Rahmadiawan
- & Shih-Chen Shi
-
Article
| Open AccessFormation mechanisms and environmental influences on the crystal growth of wulfenite
- Nik Gračanin
- , Matejka Podlogar
- & Nastja Rogan Šmuc
-
Article
| Open AccessOptimization of wear parameters for ECAP-processed ZK30 alloy using response surface and machine learning approaches: a comparative study
- Mahmoud Shaban
- , Fahad Nasser Alsunaydih
- & Yasmine El-Taybany
-
Article
| Open AccessHigh-performance optoelectronic and thermoelectric properties of transparent conductors based on Tl2O3 under pressure
- H. A. Rahnamaye Aliabad
- , A. Asadpour Arzefooni
- & P. Khosrojerdi
-
Article
| Open AccessNovel Cu(II)-based metal–organic framework STAM-1 as a sulfur host for Li–S batteries
- V. Niščáková
- , M. Almáši
- & A. S. Fedorková
-
Article
| Open AccessEfficacy evaluation of hydrogen peroxide disinfectant based zinc oxide nanoparticles against diarrhea causing Escherichia coli in ruminant animals and broiler chickens
- Walaa I. Ahmed
- , Asmaa N. Mohammed
- & AL-Shimaa A. Sleim
-
Article
| Open AccessGraphsene as a novel porous two-dimensional carbon material for enhanced oxygen reduction electrocatalysis
- Mohammadreza Hosseini
- , Maryam Soleimani
- & Mahdi Pourfath
-
Article
| Open AccessWater adsorption on surfaces of calcium aluminosilicate crystal phase of stone wool: a DFT study
- Thi H. Ho
- , Nguyen-Hieu Hoang
- & Thuat T. Trinh
-
Article
| Open AccessAn all phosphorene lattice nanometric spin valve
- P. Kumari
- , S. Majumder
- & S. J. Ray
-
Article
| Open AccessTumor growth-arrest effect of tetrahydroquinazoline-derivative human topoisomerase II-alpha inhibitor in HPV-negative head and neck squamous cell carcinoma
- Patrizia Sarogni
- , Nicoletta Brindani
- & Valerio Voliani
-
Article
| Open AccessInvestigation of damping coefficients for elastic collision particles utilizing the acoustic frequency sampling method
- Xinlin Shi
- , Wenzhen Zhong
- & Dengchao Sun
-
Article
| Open AccessSpallation and particles infusion into the extracorporeal circuit during CRRT: a preventable phenomenon
- Maria Cristina Ruffa
- , Giacomo Bignante
- & Gianluca Villa
-
Article
| Open AccessResearch on mix design and mechanical performances of MK-GGBFS based geopolymer pastes using central composite design method
- Ziqi Yao
- , Ling Luo
- & Changwei Qu
-
Article
| Open AccessNanoindentation into a bcc high-entropy HfNbTaTiZr alloy—an atomistic study of the effect of short-range order
- Iyad Alabd Alhafez
- , Orlando R. Deluigi
- & Eduardo M. Bringa
-
Article
| Open AccessCoupled responses of thermomechanical waves in functionally graded viscoelastic nanobeams via thermoelastic heat conduction model including Atangana–Baleanu fractional derivative
- Ahmed E. Abouelregal
- , Marin Marin
- & S. S. Askar