Featured
-
-
Article
| Open AccessStudy on static and dynamic mechanical properties and microstructure of silica fume-polypropylene fiber modified rubber concrete
- Chenyue Han
- , Jianyong Pang
- & Chunchun Yang
-
Article
| Open AccessA broadband second-order bandpass frequency selective surface for microwave and millimeter wave application
- Zhiming Li
- , Xiaolong Weng
- & Mei Bi
-
Article
| Open AccessVoronoi cell finite element method for heat conduction analysis of composite materials
- Siqi Chen
- , Changhao Hu
- & Rui Zhang
-
Article
| Open AccessPotential environmental impact of mycelium composites on African communities
- Stefania Akromah
- , Neha Chandarana
- & Stephen J. Eichhorn
-
Article
| Open AccessMechanical performance degradation investigation on FRP reinforced concrete based on neural network design method
- Wenyuan Xu
- , Wei Li
- & Yongcheng Ji
-
Article
| Open AccessMechanical recycling of CFRPs based on thermoplastic acrylic resin with the addition of carbon nanotubes
- Szymon Demski
- , Michał Misiak
- & Hermann Ehrlich
-
Article
| Open AccessThermal modal analysis of hypersonic composite wing on transient aerodynamic heating
- Kangjie Wang
- , Junli Wang
- & Wenyong Quan
-
Article
| Open AccessExperimental study on mechanical and hydraulic properties of xanthan gum improved low liquid limit silty soil
- Xutao Zhang
- , Wenyue Cao
- & Xiao Zhang
-
Article
| Open AccessBi-layer cBN-based composites reinforced with oxide and non-oxide microfibers of refractory compounds
- Serhiy Klymenko
- , Hao Zhang
- & Victor M. Novichenko
-
Article
| Open AccessDeep convolutional generative adversarial network for generation of computed tomography images of discontinuously carbon fiber reinforced polymer microstructures
- Juliane Blarr
- , Steffen Klinder
- & Kay A. Weidenmann
-
Article
| Open AccessDesign and analysis of a complementary structure-based high selectivity tri-band frequency selective surface
- Zhiming Li
- , Xiaolong Weng
- & Mei Bi
-
Article
| Open AccessInvestigation of damping coefficients for elastic collision particles utilizing the acoustic frequency sampling method
- Xinlin Shi
- , Wenzhen Zhong
- & Dengchao Sun
-
Article
| Open AccessThree-dimensional biphase fabric estimation from 2D images by deep learning
- Daniel Chou
- , Matias Etcheverry
- & Chloé Arson
-
Article
| Open AccessBioactive and biodegradable cotton fabrics produced via synergic effect of plant extracts and essential oils in chitosan coating system
- Bolesław Szadkowski
- , Magdalena Śliwka-Kaszyńska
- & Anna Marzec
-
Article
| Open AccessLong-span fiber composite truss made by coreless filament winding for large-scale satellite structural systems demonstrated on a planetary sunshade concept
- Pascal Mindermann
- , Denis Acker
- & Götz T. Gresser
-
Article
| Open AccessEffect of borax-modified activator on mechanical properties and drying shrinkage of alkali-activated slag/metakaolin mortar
- Haiming Chen
- , Ziguang Qin
- & Peng Wu
-
Article
| Open AccessMicrostructural characterization and inductively coupled plasma-reactive ion etching resistance of Y2O3–Y4Al2O9 composite under CF4/Ar/O2 mixed gas conditions
- Ho Jin Ma
- , Seonghyeon Kim
- & Young-Jo Park
-
Article
| Open AccessEffects of the addition of short straight steel fibers on the strength and strains of high-strength concrete during compression
- Maciej Kaźmierowski
- , Roman Jaskulski
- & Michał Kordasz
-
Article
| Open AccessSimulation of interfacial debonding in hollow particle reinforced composites with VCFEM
- Zhiyi Wang
- & Rui Zhang
-
Article
| Open AccessHigh-temperature tensile strength of C/SiC composite under laser-induced high heating flux in an aerobic environment
- Jiawei Wang
- , Bin Li
- & Yanlong Shen
-
Article
| Open AccessA comparative analysis of RCC and composite buildings using the new plastic deformation (PD) method
- Zhang Qing Qing
- & Zhang Li Na
-
Article
| Open AccessStructural design and dynamic characteristics analysis of braided composite two-stage gear transmission system
- Weiliang Zhang
-
Article
| Open AccessProduction, characterization and performance of green geopolymer modified with industrial by-products
- Ramadan Abbas
- , M. A. Abdelzaher
- & M. A. Tantawy
-
Article
| Open AccessMicrostructure reconstruction of 2D/3D random materials via diffusion-based deep generative models
- Xianrui Lyu
- & Xiaodan Ren
-
Article
| Open AccessDevelopment and research of a SS-level universal double-beam assembled bridge barrier
- Qianmiao Bu
- , Xinpeng Ning
- & Lei Ma
-
Article
| Open AccessEstimation of compressive strength of waste concrete utilizing fly ash/slag in concrete with interpretable approaches: optimization and graphical user interface (GUI)
- Yakubu Dodo
- , Kiran Arif
- & Yaser Gamil
-
Article
| Open AccessEnhancement of the mechanical properties in ultra-low weight SWCNT sandwiched PDMS composites using a novel stacked architecture
- Pavithra Ananthasubramanian
- , Rahul Sahay
- & Nagarajan Raghavan
-
Article
| Open AccessUsing thermokinetic methods to enhance properties of epoxy resins with amino acids as biobased curing agents by achieving full crosslinking
- Melissa Walter
- , Marcel Neubacher
- & Bodo Fiedler
-
Article
| Open AccessBonding performance and surface characterization of cold-bonded acetylated beech (Fagus sylvatica L.) laminated veneer lumber
- Maik Slabohm
- & Holger Militz
-
Article
| Open AccessPreparation and research of new black zirconia ceramics
- Yuxuan Ding
- & Qingchun Wang
-
Article
| Open AccessStress–strain characteristics of FRP–PVC confined spontaneous combustion gangue concrete columns
- Jinyang Zhang
- , Haiqing Liu
- & Zimu Chen
-
Article
| Open AccessMultifunctional metallic nanocomposite for overcoming the strength–ductility trade-off
- Asheesh R. Lanba
- , Reginald F. Hamilton
- & Richard F. Gordon
-
Article
| Open AccessExperimental study on direct tensile fatigue performance of basalt fiber reinforced concrete
- Xutao Zhang
- , Chao Lou
- & Xikuan Lyu
-
Article
| Open AccessAxial stress versus strain responses of CFRP confined concrete containing electronic waste aggregates
- Saad Ullah
- , Muhammad Irshad Qureshi
- & Ekkachai Yooprasertchai
-
Article
| Open AccessProgressive failure analysis of perforated composite laminates considering nonlinear shear effect
- Z. R. Wu
- , Yirong Yang
- & Hang Lei
-
Article
| Open AccessMathematical models of apparent viscosity as a function of water–cement/binder ratio and superplasticizer in cement pastes
- Yong Yuan
- , Xiaoyun Wang
- & Ying Dai
-
Article
| Open AccessA comprehensive study on the fire resistance properties of ultra-fine ceramic waste-filled high alkaline white cement paste composites for progressing towards sustainability
- M. A. Abdelzaher
- , Asmaa S. Hamouda
- & Ibrahim M. El-Kattan
-
Article
| Open AccessTwo natural toughening strategies may inspire sustainable structures
- Israel Greenfeld
- & H. Daniel Wagner
-
Article
| Open AccessImpacts investigation of gas barrier on effective thermal conductivity and service life of vacuum insulation panel
- Mingxiao Shi
- , Lixia Yang
- & Jiaxiang Zhang
-
Article
| Open AccessCompression properties and constitutive model of short glass fiber reinforced poly-ether-ether-ketone (PEEK)
- Ruijie Zhang
- , Li Chen
- & Zhilin Wu
-
Article
| Open AccessEffect of He2+ ion irradiation on the mechanical properties of automated fibre placement (AFP) CF-PEEK thermoplastics composites
- Ebrahim Oromiehie
- , Vishnu Nair
- & B. Gangadhara Prusty
-
Article
| Open AccessPredicting the strengths of date fiber reinforced concrete subjected to elevated temperature using artificial neural network, and Weibull distribution
- Musa Adamu
- , Khalil Ur Rehman
- & Wasfi Shatanawi
-
Article
| Open AccessInvestigation of mechanical, physical and thermoacoustic properties of a novel light-weight dense wall panels made of bamboo Phyllostachys Bambusides
- Parham Gholizadeh
- , Hamid Zarea Hosseinabadi
- & Alireza Javadian
-
Article
| Open AccessMechanical superiority of Pseudoxytenanthera bamboo for sustainable engineering solutions
- N. Jiyas
- , Indu Sasidharan
- & B. Sabulal
-
Article
| Open AccessExperimental investigation on fatigue life and tensile strength of carbon fiber-reinforced PLA composites based on fused deposition modeling
- Ehsan Kargar
- & Ahmad Ghasemi-Ghalebahman
-
Article
| Open AccessComparative study on free vibration analysis of rotating bi-directional functionally graded beams using multiple beam theories with uncertainty considerations
- Moustafa S. Taima
- , Mohamed B. Shehab
- & Michael I. Friswell
-
Article
| Open AccessCharacterisation of AZ31 metal matrix composites reinforced with carbon nanotubes
- Sandeep Ganesh Mukunda
- , Satish Babu Boppana
- & T. Aravinda
-
Article
| Open AccessStudy on CNT/TPU cube under the 3D printing conditions of infill patterns and density
- Imjoo Jung
- , Eun Joo Shin
- & Sunhee Lee
-
Article
| Open AccessCharacterization and properties of manganese oxide film coated clinoptilolite as filter material in fixed-bed columns for removal of Mn(II) from aqueous solution
- Xing Jin
- , Jinxiang Fu
- & Di Luo